875 resultados para Cost-Benefit Analysis.


Relevância:

40.00% 40.00%

Publicador:

Resumo:

The UK700 trial failed to demonstrate an overall benefit of intensive case management (ICM) in patients with severe psychotic illness. This does not discount a benefit for particular subgroups, and evidence of a benefit of ICM for patients of borderline intelligence has been presented. The aim of this study is to investigate whether this effect is part of a general benefit for patients with severe psychosis complicated by additional needs. In the UK700 trial patients with severe psychosis were randomly allocated to ICM or standard case management. For each patient group with complex needs the effect of ICM is compared with that in the rest of the study cohort. Outcome measures are days spent in psychiatric hospital and the admission and discharge rates. ICM may be of benefit to patients with severe psychosis complicated by borderline intelligence or depression, but may cause patients using illicit drugs to spend more time in hospital. There was no convincing evidence of an effect of ICM in a further seven patient groups. ICM is not of general benefit to patients with severe psychosis complicated by additional needs. The benefit of ICM for patients with borderline intelligence is an isolated effect which should be interpreted cautiously until further data are available.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

This paper studies the effects of increasing formality via tax reduction and simplification schemes on micro-firm performance. It uses the 1997 Brazilian SIMPLES program. We develop a simple theoretical model to show that SIMPLES has an impact only on a segment of the micro-firm population, for which the effect of formality on firm performance can be identified, and that can be analyzed along the single dimensional quantiles of the conditional firm revenues. To estimate the effect of formality, we use an econometric approach that compares eligible and non-eligible firms, born before and after SIMPLES in a local interval about the introduction of SIMPLES. We use an estimator that combines both quantile regression and the regression discontinuity identification strategy. The empirical results corroborate the positive effect of formality on microfirms' performance and produce a clear characterization of who benefits from these programs.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Effective disaster risk management relies on science-based solutions to close the gap between prevention and preparedness measures. The consultation on the United Nations post-2015 framework for disaster risk reduction highlights the need for cross-border early warning systems to strengthen the preparedness phases of disaster risk management, in order to save lives and property and reduce the overall impact of severe events. Continental and global scale flood forecasting systems provide vital early flood warning information to national and international civil protection authorities, who can use this information to make decisions on how to prepare for upcoming floods. Here the potential monetary benefits of early flood warnings are estimated based on the forecasts of the continental-scale European Flood Awareness System (EFAS) using existing flood damage cost information and calculations of potential avoided flood damages. The benefits are of the order of 400 Euro for every 1 Euro invested. A sensitivity analysis is performed in order to test the uncertainty in the method and develop an envelope of potential monetary benefits of EFAS warnings. The results provide clear evidence that there is likely a substantial monetary benefit in this cross-border continental-scale flood early warning system. This supports the wider drive to implement early warning systems at the continental or global scale to improve our resilience to natural hazards.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Background Cognitive–behavioural therapy (CBT) for childhood anxiety disorders is associated with modest outcomes in the context of parental anxiety disorder. Objectives This study evaluated whether or not the outcome of CBT for children with anxiety disorders in the context of maternal anxiety disorders is improved by the addition of (i) treatment of maternal anxiety disorders, or (ii) treatment focused on maternal responses. The incremental cost-effectiveness of the additional treatments was also evaluated. Design Participants were randomised to receive (i) child cognitive–behavioural therapy (CCBT); (ii) CCBT with CBT to target maternal anxiety disorders [CCBT + maternal cognitive–behavioural therapy (MCBT)]; or (iii) CCBT with an intervention to target mother–child interactions (MCIs) (CCBT + MCI). Setting A NHS university clinic in Berkshire, UK. Participants Two hundred and eleven children with a primary anxiety disorder, whose mothers also had an anxiety disorder. Interventions All families received eight sessions of individual CCBT. Mothers in the CCBT + MCBT arm also received eight sessions of CBT targeting their own anxiety disorders. Mothers in the MCI arm received 10 sessions targeting maternal parenting cognitions and behaviours. Non-specific interventions were delivered to balance groups for therapist contact. Main outcome measures Primary clinical outcomes were the child’s primary anxiety disorder status and degree of improvement at the end of treatment. Follow-up assessments were conducted at 6 and 12 months. Outcomes in the economic analyses were identified and measured using estimated quality-adjusted life-years (QALYs). QALYS were combined with treatment, health and social care costs and presented within an incremental cost–utility analysis framework with associated uncertainty. Results MCBT was associated with significant short-term improvement in maternal anxiety; however, after children had received CCBT, group differences were no longer apparent. CCBT + MCI was associated with a reduction in maternal overinvolvement and more confident expectations of the child. However, neither CCBT + MCBT nor CCBT + MCI conferred a significant post-treatment benefit over CCBT in terms of child anxiety disorder diagnoses [adjusted risk ratio (RR) 1.18, 95% confidence interval (CI) 0.87 to 1.62, p = 0.29; adjusted RR CCBT + MCI vs. control: adjusted RR 1.22, 95% CI 0.90 to 1.67, p = 0.20, respectively] or global improvement ratings (adjusted RR 1.25, 95% CI 1.00 to 1.59, p = 0.05; adjusted RR 1.20, 95% CI 0.95 to 1.53, p = 0.13). CCBT + MCI outperformed CCBT on some secondary outcome measures. Furthermore, primary economic analyses suggested that, at commonly accepted thresholds of cost-effectiveness, the probability that CCBT + MCI will be cost-effective in comparison with CCBT (plus non-specific interventions) is about 75%. Conclusions Good outcomes were achieved for children and their mothers across treatment conditions. There was no evidence of a benefit to child outcome of supplementing CCBT with either intervention focusing on maternal anxiety disorder or maternal cognitions and behaviours. However, supplementing CCBT with treatment that targeted maternal cognitions and behaviours represented a cost-effective use of resources, although the high percentage of missing data on some economic variables is a shortcoming. Future work should consider whether or not effects of the adjunct interventions are enhanced in particular contexts. The economic findings highlight the utility of considering the use of a broad range of services when evaluating interventions with this client group. Trial registration Current Controlled Trials ISRCTN19762288. Funding This trial was funded by the Medical Research Council (MRC) and Berkshire Healthcare Foundation Trust and managed by the National Institute for Health Research (NIHR) on behalf of the MRC–NIHR partnership (09/800/17) and will be published in full in Health Technology Assessment; Vol. 19, No. 38.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Partial budgeting was used to estimate the net benefit of blending Jersey milk in Holstein-Friesian milk for Cheddar cheese production. Jersey milk increases Cheddar cheese yield. However, the cost of Jersey milk is also higher; thus, determining the balance of profitability is necessary, including consideration of seasonal effects. Input variables were based on a pilot plant experiment run from 2012 to 2013 and industry milk and cheese prices during this period. When Jersey milk was used at an increasing rate with Holstein-Friesian milk (25, 50, 75, and 100% Jersey milk), it resulted in an increase of average net profit of 3.41, 6.44, 8.57, and 11.18 pence per kilogram of milk, respectively, and this additional profit was constant throughout the year. Sensitivity analysis showed that the most influential input on additional profit was cheese yield, whereas cheese price and milk price had a small effect. The minimum increase in yield, which was necessary for the use of Jersey milk to be profitable, was 2.63, 7.28, 9.95, and 12.37% at 25, 50, 75, and 100% Jersey milk, respectively. Including Jersey milk did not affect the quantity of whey butter and powder produced. Althoug further research is needed to ascertain the amount of additional profit that would be found on a commercial scale, the results indicate that using Jersey milk for Cheddar cheese making would lead to an improvement in profit for the cheese makers, especially at higher inclusion rates.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

X-ray computed tomography (CT) refers to the cross-sectional imaging of an object measuring the transmitted radiation at different directions. In this work, we describe the development of a low cost micro-CT X-ray scanner that is being developed for nondestructive testing. This tomograph operates using a microfocus X-ray source and contains a silicon photodiode as detectors. The performance of the system, by its spatial resolution, has been estimated through its Modulation Transfer Function - MTF and the obtained value at 10% of MTF is 661 μm. It was built as a general purpose nondestructive testing device. © 2009 American Institute of Physics.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Cogeneration may be defined as the simultaneous production of electric power and useful heat from the burning of a single fuel. This technique of combined heat and power production has been applied in both the industrial and tertiary sectors. It has been mainly used because of its overall efficiency, and the guarantee of electricity with a low level of environmental impact. The compact cogeneration systems using internal combustion engine as prime movers are thoroughly applied because of the good relationship among cost and benefit obtained in such devices. The cogeneration system of this study consists of an internal combustion engine using natural gas or biogas as fuel, combined with two heat exchangers and an absorption chiller utilising water-ammonia as working mixture. This work presents an energetic and economic comparison between natural gas and biogas as fuel used for the system proposed. The results are useful to identify the feasible applications for this system, such as residential sector in isolated areas, hotels, universities etc. (C) 2014 Elsevier Ltd. All rights reserved.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Scenario-based analyses were computed for benefits and costs linked with hypothetical oral rabies vaccination (ORV) campaigns to contain or eliminate skunk-variant rabies in skunks (Mephitis mephitis) in California, USA. Scenario 1 assumed baiting eight zones (43,388 km2 total) that comprised 73% of known skunk rabies locations in the state. Scenario 2 also assumed baiting these eight zones, but further assumed that added benefits would result from preventing the spread of skunk-variant rabies into Los Angeles County, USA. Scenarios assumed a fixed bait cost ($1.24 each) but varied campaigns (one, two and three annual ORV applications), densities of baits (37.5/km2, 75/km2 and 150/km2), levels of prevention (50%, 75%, and 100%), and contingency expenditures if rabies recurred (20%, 40%, and 60% of campaign costs). Prorating potential annual benefits during a 12-yr time horizon yielded benefit-cost ratios (BCRs) between 0.16 and 2.91 and between 0.34 and 6.35 for Scenarios 1 and 2, respectively. Economic issues relevant to potentially managing skunk-variant rabies with ORV are discussed.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Stabilizing human population size and reducing human-caused impacts on the environment are keys to conserving threatened species (TS). Earth's human population is ~ 7 billion and increasing by ~ 76 million per year. This equates to a human birth-death ratio of 2.35 annually. The 2007 Red List prepared by the International Union for Conservation of Nature and Natural Resources (IUCN) categorized 16,306 species of vertebrates, invertebrates, plants, and other organisms (e.g., lichens, algae) as TS. This is ~ 1 percent of the 1,589,161 species described by IUCN or ~ 0.0033 percent of the believed 5,000,000 total species. Of the IUCN’s described species, vertebrates comprised relatively the most TS listings within respective taxonomic categories (5,742 of 59,811), while invertebrates (2,108 of 1,203,175), plants (8,447 of 297,326), and other species (9 of 28,849) accounted for minor class percentages. Conservation economics comprises microeconomic and macroeconomic principles involving interactions among ecological, environmental, and natural resource economics. A sustainable-growth (steady-state) economy has been posited as instrumental to preserving biological diversity and slowing extinctions in the wild, but few nations endorse this approach. Expanding growth principles characterize most nations' economic policies. To date, statutory fine, captive breeding cost, contingent valuation analysis, hedonic pricing, and travel cost methods are used to value TS in economic research and models. Improved valuation methods of TS are needed for benefit-cost analysis (BCA) of conservation plans. This Chapter provides a review and analysis of: (1) the IUCN status of species, (2) economic principles inherent to sustainable versus growth economies, and (3) methodological issues which hinder effective BCAs of TS conservation.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The oregano is a plant, rich in essential oil and very used as spice in the preparation of foods. The objective of this paper was to analyze the viability of irrigation for oregano in Presidente Prudente, São Paulo state, Brazil, including economic risk factors, their effect on irrigation total cost, as well as the different pumping kinds. The Monte Carlo simulation was utilized to study the economic factors: fixed cost, labor, maintenance, pumping and water. The use of irrigation for the oregano in the region of Presidente Prudente is indicated because of its economic feasibility and the reduced risks. The average values of the benefit/cost for all water depths tested were higher than 1, indicating viability. The use of irrigation promoted lower risks compared to the non irrigated crop. The micro irrigation system presented greater sensitivity to changes of prices of the equipment associated to the variation of the useful life of the system. The oregano selling price was the most important factor involved in annual net profit. The water cost was the factor of lesser influence on the total cost. Due to the characteristic of high drip irrigation frequency there was no difference between the tariffs based in use hour of electric energy classified as green and blue, which are characterized by applying different rates on the energy consumption and demand according to the hours of day and times of the year. For the studied region it was recommended drip irrigation water management of oregano with the daily application of 100% of pan evaporation Class A using electric motor with tariffs blue or green.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The aim of this thesis was to describe the development of motion analysis protocols for applications on upper and lower limb extremities, by using inertial sensors-based systems. Inertial sensors-based systems are relatively recent. Knowledge and development of methods and algorithms for the use of such systems for clinical purposes is therefore limited if compared with stereophotogrammetry. However, their advantages in terms of low cost, portability, small size, are a valid reason to follow this direction. When developing motion analysis protocols based on inertial sensors, attention must be given to several aspects, like the accuracy of inertial sensors-based systems and their reliability. The need to develop specific algorithms/methods and software for using these systems for specific applications, is as much important as the development of motion analysis protocols based on them. For this reason, the goal of the 3-years research project described in this thesis was achieved first of all trying to correctly design the protocols based on inertial sensors, in terms of exploring and developing which features were suitable for the specific application of the protocols. The use of optoelectronic systems was necessary because they provided a gold standard and accurate measurement, which was used as a reference for the validation of the protocols based on inertial sensors. The protocols described in this thesis can be particularly helpful for rehabilitation centers in which the high cost of instrumentation or the limited working areas do not allow the use of stereophotogrammetry. Moreover, many applications requiring upper and lower limb motion analysis to be performed outside the laboratories will benefit from these protocols, for example performing gait analysis along the corridors. Out of the buildings, the condition of steady-state walking or the behavior of the prosthetic devices when encountering slopes or obstacles during walking can also be assessed. The application of inertial sensors on lower limb amputees presents conditions which are challenging for magnetometer-based systems, due to ferromagnetic material commonly adopted for the construction of idraulic components or motors. INAIL Prostheses Centre stimulated and, together with Xsens Technologies B.V. supported the development of additional methods for improving the accuracy of MTx in measuring the 3D kinematics for lower limb prostheses, with the results provided in this thesis. In the author’s opinion, this thesis and the motion analysis protocols based on inertial sensors here described, are a demonstration of how a strict collaboration between the industry, the clinical centers, the research laboratories, can improve the knowledge, exchange know-how, with the common goal to develop new application-oriented systems.