Location of concentrators in a computer communication network: a stochastic automation search method

The following problem is considered. Given the locations of the Central Processing Unit (ar;the terminals which have to communicate with it, to determine the number and locations of the concentrators and to assign the terminals to the concentrators in such a way that the total cost is minimized. There is alao a fixed cost associated with each concentrator. There is ail upper limit to the number of terminals which can be connected to a concentrator. The terminals can be connected directly to the CPU also In this paper it is assumed that the concentrators can bo located anywhere in the area A containing the CPU and the terminals. Then this becomes a multimodal optimization problem. In the proposed algorithm a stochastic automaton is used as a search device to locate the minimum of the multimodal cost function . The proposed algorithm involves the following. The area A containing the CPU and the terminals is divided into an arbitrary number of regions (say K). An approximate value for the number of concentrators is assumed (say m). The optimum number is determined by iteration later The m concentrators can be assigned to the K regions in (mk) ways (m > K) or (km) ways (K>m).(All possible assignments are feasible, i.e. a region can contain 0,1,…, to concentrators). Each possible assignment is assumed to represent a state of the stochastic variable structure automaton. To start with, all the states are assigned equal probabilities. At each stage of the search the automaton visits a state according to the current probability distribution. At each visit the automaton selects a 'point' inside that state with uniform probability. The cost associated with that point is calculated and the average cost of that state is updated. Then the probabilities of all the states are updated. The probabilities are taken to bo inversely proportional to the average cost of the states After a certain number of searches the search probabilities become stationary and the automaton visits a particular state again and again. Then the automaton is said to have converged to that state Then by conducting a local gradient search within that state the exact locations of the concentrators are determined This algorithm was applied to a set of test problems and the results were compared with those given by Cooper's (1964, 1967) EAC algorithm and on the average it was found that the proposed algorithm performs better.

Accounting for risk: The advent of capped conveyancing title insurance

Title insurance companies originating from America, have, in the past 15 years become part of the Australian conveyancing landscape. However for most residential freehold owners, their activities would be a mystery. A purchaser does not routinely obtain title insurance, with the companies presently focussing on servicing the mortgagee sector. While the lack of penetration in the residential purchaser market may be attributed to the consumer’s lack of knowledge, evidence from Ontario and New Zealand illustrates that title insurance is likely to become an additional cost in the conveyancing process in Australia. In this article we highlight the reasons why, and demonstrate how title insurers have, by working with the legal profession been able to subtly move the risk of responsibility for compensation for loss, (at least in the first instance) from the state to the insurer, but with the added benefit for the state and the conveyancing agents that the cost of the insurance is ultimately borne by the consumer. In New Zealand this development is being accelerated by the introduction of capped conveyancing title insurance. Whether title insurance will become part of the conveyancing process is no longer the relevant question for Australia, (it undoubtedly will), but the unknown issue is just how title insurance companies will work with conveyancing agents to infiltrate the market, and what response this infiltration will have in terms of the state’s view as to their continued role in the provision of assurance. We suggest that developments from New Zealand in relation to capped conveyancing insurance are likely to be replicated in Australia in the near future, and that the state’s role in providing an assurance fund will continue, though the state may seek to expand the areas in which the right to compensation is restricted.

Change to costs and lengths of stay in the emergency department and the Brisbane protocol: An observational study

- Objective To compare health service cost and length of stay between a traditional and an accelerated diagnostic approach to assess acute coronary syndromes (ACS) among patients who presented to the emergency department (ED) of a large tertiary hospital in Australia. - Design, setting and participants This historically controlled study analysed data collected from two independent patient cohorts presenting to the ED with potential ACS. The first cohort of 938 patients was recruited in 2008–2010, and these patients were assessed using the traditional diagnostic approach detailed in the national guideline. The second cohort of 921 patients was recruited in 2011–2013 and was assessed with the accelerated diagnostic approach named the Brisbane protocol. The Brisbane protocol applied early serial troponin testing for patients at 0 and 2 h after presentation to ED, in comparison with 0 and 6 h testing in traditional assessment process. The Brisbane protocol also defined a low-risk group of patients in whom no objective testing was performed. A decision tree model was used to compare the expected cost and length of stay in hospital between two approaches. Probabilistic sensitivity analysis was used to account for model uncertainty. - Results Compared with the traditional diagnostic approach, the Brisbane protocol was associated with reduced expected cost of $1229 (95% CI −$1266 to $5122) and reduced expected length of stay of 26 h (95% CI −14 to 136 h). The Brisbane protocol allowed physicians to discharge a higher proportion of low-risk and intermediate-risk patients from ED within 4 h (72% vs 51%). Results from sensitivity analysis suggested the Brisbane protocol had a high chance of being cost-saving and time-saving. - Conclusions This study provides some evidence of cost savings from a decision to adopt the Brisbane protocol. Benefits would arise for the hospital and for patients and their families.

Evolution of Social Behavior Through Interpopulation Selection

Under certain special conditions natural selection can be effective at the level of local populations, or demes. Such interpopulation selection will favor genotypes that reduce the probability of extinction of their parent population even at the cost of a lowered inclusive fitness. Such genotypes may be characterized by altruistic traits only in a viscous population, i.e., in a population in which neighbors tend to be closely related. In a non-viscous population the interpopulation selection will instead favor spiteful traits when the populations are susceptible to extinction through the overutilization of the habitat, and cooperative traits when it is the newly established populations that are in the greatest danger of extinction.

Numerical study on the surface depression of the concrete runway pavement under impact load

Airport runway pavement always subjected to huge impact loading due to the hard landing of aircraft on the pavement surface. Therefore runway pavements should have sufficient impact resistance capability to avoid damage causing by hard impact like surface deflection in downward or penetration since the repair works is cumbersome within the operating condition of airport and also increases the service life cost of the pavement structure. Several research works have been carried out on airport runway pavement to measure the present condition of pavement and also to predict future performance of it. However, most of the works are confined by pavement response under moving aircraft loading. Nevertheless, no comprehensive research work is yet conducted to identify the controlling factors which might have significant effect in changing the common pavements damage like surface penetration depth under impact of aircraft. Therefore, a 3D FE study is conducted to determine some effective factors in controlling the top surface penetration depth of runway pavement. Among the exterior factors, mass of the impactor, velocity of the impactor, impact angle and boundary conditions are selected and as interior factors, thickness of the runway pavement, compressive strength and density of materials used in the runway pavement are selected.

Empirical Analysis of Competition in Procurement Auctions

A vast amount of public services and goods are contracted through procurement auctions. Therefore it is very important to design these auctions in an optimal way. Typically, we are interested in two different objectives. The first objective is efficiency. Efficiency means that the contract is awarded to the bidder that values it the most, which in the procurement setting means the bidder that has the lowest cost of providing a service with a given quality. The second objective is to maximize public revenue. Maximizing public revenue means minimizing the costs of procurement. Both of these goals are important from the welfare point of view. In this thesis, I analyze field data from procurement auctions and show how empirical analysis can be used to help design the auctions to maximize public revenue. In particular, I concentrate on how competition, which means the number of bidders, should be taken into account in the design of auctions. In the first chapter, the main policy question is whether the auctioneer should spend resources to induce more competition. The information paradigm is essential in analyzing the effects of competition. We talk of a private values information paradigm when the bidders know their valuations exactly. In a common value information paradigm, the information about the value of the object is dispersed among the bidders. With private values more competition always increases the public revenue but with common values the effect of competition is uncertain. I study the effects of competition in the City of Helsinki bus transit market by conducting tests for common values. I also extend an existing test by allowing bidder asymmetry. The information paradigm seems to be that of common values. The bus companies that have garages close to the contracted routes are influenced more by the common value elements than those whose garages are further away. Therefore, attracting more bidders does not necessarily lower procurement costs, and thus the City should not implement costly policies to induce more competition. In the second chapter, I ask how the auctioneer can increase its revenue by changing contract characteristics like contract sizes and durations. I find that the City of Helsinki should shorten the contract duration in the bus transit auctions because that would decrease the importance of common value components and cheaply increase entry which now would have a more beneficial impact on the public revenue. Typically, cartels decrease the public revenue in a significant way. In the third chapter, I propose a new statistical method for detecting collusion and compare it with an existing test. I argue that my test is robust to unobserved heterogeneity unlike the existing test. I apply both methods to procurement auctions that contract snow removal in schools of Helsinki. According to these tests, the bidding behavior of two of the bidders seems consistent with a contract allocation scheme.

Key drivers of the economic burden of community-associated Methicillin-resistant Staphylococcus aureus in Australia

Estimates of the economic cost of community-associated Methicillin-resistant Staphylococcus aureus(CA-MRSA) in the United States (US) are substantial, ranging from $1.4-13.8 billion. In Australia, it has been shown that rates of CA-MRSA are increasing, and individual studies have looked at the morbidity and mortality associated with CA-MRSA, however, it is not clear what is driving the economic burden of CA-MRSA at a national level. This study presents preliminary findings about the key drivers of the economic cost of CA-MRSA infections in Australia

Benefits and challenges of antivirulence antimicrobials at the dawn of the post-antibiotic era

In April 2014, the World Health Organization announced the beginning of a post-antibiotic era and declared antimicrobial resistance (AMR) a public health priority demanding global action. If no action is taken, by 2050 AMR will kill more people each year than cancer, with 10 million estimated annual deaths at a cost of $100 trillion to the global economy. New therapies to tackle multidrug resistant bacterial pathogens are urgently needed. Unlike traditional antibiotics, antivirulence drugs inhibit bacterial virulence instead of growth promising to offer a new class of superior therapeutics that will be ‘evolution-proof’ and ‘tailored-spectrum’. This mini-review discusses the latest emerging evidence on the promised benefits of antivirulence drugs over conventional antibiotics, also highlighting the challenges in evaluating these properties for each of the diverse virulence targets that are currently under investigation. The author argues that overcoming such challenges early in the development process constitutes an important step towards successfully progressing each of the expanding number of antivirulence strategies into next-generation therapies for common human and animal infections that are becoming increasingly refractory to all available antibiotics.

Malaria burden and costs of intensified control in Bhutan, 2006-2014: A situational analysis

- Introduction Malaria cases have dwindled in Bhutan with aim of malaria elimination by 2016. The aims of this study are to determine the trends and burden of malaria, the costs of intensified control activities, the main donors of the control activities and the costs of different preventive measures in the pre-elimination phase (2006-2014). - Methods A descriptive analysis of malaria surveillance data from 2006-2014 was carried out, using data from the Vector-borne Disease Control Programme (VDCP), Bhutan. Malaria morbidity and mortality among local Bhutanese and foreign nationals were analysed. The cost of different control and preventive measures, and estimation of the average numbers of long-lasting insecticidal nests (LLINs) per person were calculated. - Findings There were 5,491 confirmed malaria cases from 2006 to 2014. By 2013, there was an average of one LLIN for every 1·51 individuals. The Global Fund was the main international donor accounting for > 80% of the total funds. The cost of procuring LLINs accounted for > 90% of the total cost of prevention measures. - Interpretation The malaria burden reduced significantly over the study period with high coverage of LLINs in Bhutan. This foreseeable challenges that require national attention to maintain malaria-free status after elimination are importation of malaria, particularly from India; continued protection of the population in endemic districts through complete coverage with LLINs and IRS; and exploration of local funding modalities post elimination in the event there is a reduction in international funding.

Experimental investigation of die wear in small-batch hammer-forging under unlubricated conditions

Wear of dies is a serious problem in the forging industry. The materials used for the dies are generally expensive steel alloys and the dies require costly heat treatment and surface finishing operations. Degeneration of the die profile implies rejection of forged components and necessitates resinking or replacement of the die. Measures which reduce wear of the die can therefore aid in the reduction of production costs. The work reported here is the first phase of a study of the causes of die wear in forging production where the batch size is small and the machine employed is a light hammer. This is a problem characteristic of the medium and small scale area of the forging industry where the cost of dies is a significant proportion of the total capital investment. For the same energy input and under unlubricated conditions, die wear has been found to be sensitive to forging temperature; in cold forging the yield strength of the die material is the prime factor governing the degeneration of the die profile, whilst in hot forging the wear resistance of the die material is the main factor which determines the rate of die wear. At an intermediate temperature, such as that characteristic of warm forging, the die wear is found to be less than that in both cold and hot forging. This preliminary study therefore points to the fact that the forging temperature must be taken into account in the selection of die material. Further, the forging industry must take serious note of the warm forging process, as it not only provides good surface finish, as claimed by many authors, but also has an inherent tendency to minimize die wear.

Time-driven life cycle cost estimation system for product family design

This research develops a design support system, which is able to estimate the life cycle cost of different product families at the early stage of product development. By implementing the system, a designer is able to develop various cost effective product families in a shorter lead-time and minimise the destructive impact of the product family on the environment.

Identification methods of key contributing factors in crashes with high numbers of fatalities and injuries in China

Objectives In China, “serious road traffic crashes” (SRTCs) are those in which there are 10-30 fatalities, 50-100 serious injuries or a total cost of 50-100 million RMB ($US8-16m), and “particularly serious road traffic crashes” (PSRTCs) are those which are more severe or costly. Due to the large number of fatalities and injuries as well as the negative public reaction they elicit, SRTCs and PSRTCs have become great concerns to China during recent years. The aim of this study is to identify the main factors contributing to these road traffic crashes and to propose preventive measures to reduce their number. Methods 49 contributing factors of the SRTCs and PSRTCs that occurred from 2007 to 2013 were collected from the database “In-depth Investigation and Analysis System for Major Road traffic crashes” (IIASMRTC) and were analyzed through the integrated use of principal component analysis and hierarchical clustering to determine the primary and secondary groups of contributing factors. Results Speeding and overloading of passengers were the primary contributing factors, featuring in up to 66.3% and 32.6% of accidents respectively. Two secondary contributing factors were road-related: lack of or nonstandard roadside safety infrastructure, and slippery roads due to rain, snow or ice. Conclusions The current approach to SRTCs and PSRTCs is focused on the attribution of responsibility and the enforcement of regulations considered relevant to particular SRTCs and PSRTCs. It would be more effective to investigate contributing factors and characteristics of SRTCs and PSRTCs as a whole, to provide adequate information for safety interventions in regions where SRTCs and PSRTCs are more common. In addition to mandating of a driver training program and publicisation of the hazards associated with traffic violations, implementation of speed cameras, speed signs, markings and vehicle-mounted GPS are suggested to reduce speeding of passenger vehicles, while increasing regular checks by traffic police and passenger station staff, and improving transportation management to increase income of contractors and drivers are feasible measures to prevent overloading of people. Other promising measures include regular inspection of roadside safety infrastructure, and improving skid resistance on dangerous road sections in mountainous areas.

Vector evaluated particle swarm optimization (VEPSO) for multi-objective design optimization of composite structures

We present a generic method/model for multi-objective design optimization of laminated composite components, based on vector evaluated particle swarm optimization (VEPSO) algorithm. VEPSO is a novel, co-evolutionary multi-objective variant of the popular particle swarm optimization algorithm (PSO). In the current work a modified version of VEPSO algorithm for discrete variables has been developed and implemented successfully for the, multi-objective design optimization of composites. The problem is formulated with multiple objectives of minimizing weight and the total cost of the composite component to achieve a specified strength. The primary optimization variables are - the number of layers, its stacking sequence (the orientation of the layers) and thickness of each layer. The classical lamination theory is utilized to determine the stresses in the component and the design is evaluated based on three failure criteria; failure mechanism based failure criteria, Maximum stress failure criteria and the Tsai-Wu failure criteria. The optimization method is validated for a number of different loading configurations - uniaxial, biaxial and bending loads. The design optimization has been carried for both variable stacking sequences, as well fixed standard stacking schemes and a comparative study of the different design configurations evolved has been presented. (C) 2007 Elsevier Ltd. All rights reserved.

Futility and the law: Knowledge, practice and attitudes of doctors in end of life care

Despite the potential harm to patients (and others) and the financial cost of providing futile treatment at the end of life, this practice occurs. This article reports on empirical research undertaken in Queensland that explores doctors’ perceptions about the law that governs futile treatment at the end of life, and the role it plays in medical practice. The findings reveal that doctors have poor knowledge of their legal obligations and powers when making decisions about withholding or withdrawing futile treatment at the end of life; their attitudes towards the law were largely negative; and the law affected their clinical practice and had or would cause them to provide futile treatment.

Hospital social work in Australia: Emerging trends or more of the same?

Social work in health care has been established for more than 100 years and is one of the largest areas of practice for social workers. Over time, demographic changes and growth in the aging population, increased longevity rates, an explosion in rates of chronic illness together with rapidly increasing cost of health care have created serious challenges for acute hospitals and health social workers. This article reviews the Australian health care system and policies with particular emphasis on the public hospital system. It then examines current hospital social work roles, including the continued role in discharge planning and expanding responsibility for emerging client problems, such as patient complexity, legal, and carer issues. The article concludes with a discussion of evolving issues and challenges facing health social work to ensure that social work remain relevant within this practice context.