915 resultados para Contamination by Pb
Resumo:
Background Aflatoxins are fungal metabolites that frequently contaminate staple foods in much of sub-Saharan Africa, and are associated with increased risk of liver cancer and impaired growth in young children. We aimed to assess whether postharvest measures to restrict aflatoxin contamination of groundnut crops could reduce exposure in west African villages.
Methods We undertook an intervention study at subsistence farms in the lower Kindia region of Guinea. Farms from 20 villages were included, ten of which implemented a package of postharvest measures to restrict aflatoxin contamination of the groundnut crop; ten controls followed usual postharvest practices. We measured the concentrations of blood aflatoxin-albumin adducts from 600 people immediately after harvest and at 3 months and 5 months postharvest to monitor the effectiveness of the intervention.
Findings In control villages mean aflatoxin-albumin concentration increased postharvest (from 5.5 pg/mg [95% CI 4.7-6.1] immediately after harvest to 18.7 pg/mg [17.0-20.6] 5 months later). By contrast, mean aflatoxin-albumin concentration in intervention villages after 5 months of groundnut storage was much the same as that immediately postharvest (7.2 pg/mg [6.2-8.4] vs 8.0 pg/mg [7.0-9.2]). At 5 months, mean adduct concentration in intervention villages was less than 50% of that in control villages (8.0 pg/mg [7.2-9.2] vs 18.7 pg/mg [17.0-20.6], p<0.0001). About a third of the number of people had non-detectable aflatoxin-albumin concentrations at harvest. At 5 months, five (2%) people in the control villages had non-detectable adduct concentrations compared with 47 (20%) of those in the intervention group (p<0.0001). Mean concentrations of aflatoxin B1 in groundnuts in household stores in intervention and control villages were consistent with measurements of aflatoxin-albumin adducts.
Interpretation Use of low-technology approaches at the subsistence-farm level in sub-Saharan Africa could substantially reduce the disease burden caused by aflatoxin exposure.
Resumo:
The objective of our study was to determine the trace metal accumulation rates in the Misten bog, Hautes-Fagnes, Belgium, and assess these in relation to established histories of atmospheric emissions from anthropogenic sources. To address these aims we analyzed trace metals and metalloids (Pb, Cu, Ni, As, Sb, Cr, Co, V, Cd and Zn), as well as Pb isotopes, using XRF, Q-ICP-MS and MC-ICP-MS, respectively in two 40-cm peat sections, spanning the last 600 yr. The temporal increase of metal fluxes from the inception of the Industrial Revolution to the present varies by a factor of 5–50, with peak values found between AD 1930 and 1990. A cluster analysis combined with Pb isotopic composition allows the identification of the main sources of Pb and by inference of the other metals, which indicates that coal consumption and metallurgical activities were the predominant sources of pollution during the last 600 years.
Resumo:
Although exogenous factors such as pollutants can act on endogenous drivers (e.g. dispersion) of populations and create spatially autocorrelated distributions, most statistical techniques assume independence of error terms. As there are no studies on metal soil pollutants and microarthropods that explicitly analyse this key issue, we completed a field study of the correlation between Oribatida and metal concentrations in litter, organic matter and soil in an attempt to account for spatial patterns of both metals and mites. The 50-m wide study area had homogenous macroscopic features, steep Pb and Cu gradients and high levels of Zn and Cd. Spatial models failed to detect metal-oribatid relationships because the observed latitudinal and longitudinal gradients in oribatid assemblages were independent of the collinear gradients in the concentration of metals. It is therefore hypothesised that other spatially variable factors (e.g. fungi, reduced macrofauna) affect oribatid assemblages, which may be influenced by metals only indirectly. (C) 2009 Elsevier Ltd. All rights reserved.
Resumo:
Campylobacter jejuni (C. jejuni) is one of the leading causes of bacterial food-borne disease worldwide. The presence of Campylobacter in chicken feces poses a high risk for contamination of chicken meat and for Campylobacter infections in human. Detection of this bacterium in chicken fecal specimens before slaughter is therefore vital to prevent disease transmission. By combining two techniques – immunomagnetic separation (IMS) and polymerase chain reaction (PCR), this study developed a reliable and specific method for rapid detection of C. jejuni in chicken fecal samples. The specificity of the assay was assured by two selection steps: 1) Dynabeads®M-270 Amine microbeads (2.8 µm in diameter) coated with C. jejuni monoclonal antibodies were used as the primary selection to isolate bacteria from fecal samples. 2) A PCR assay amplifying the Hippuricase gene was performed as the specific selection to accurately confirm the presence of C. jejuni. Without pre-enrichment, this method was able to detect approximately 10 CFU of C. jejuni in 1 µl of spiked feces within 3 h.
Resumo:
Thin single-crystal lamellae cut from Pb(Zr,Ti)O3–Pb(Fe,Ta)O3 ceramic samples have been integrated into simple coplanar capacitor devices. The influence of applied electric and magnetic fields on ferroelectric domain configurations has been mapped, using piezoresponse force microscopy. The extent to which magnetic fields alter the ferroelectric domains was found to be strongly history dependent: after switching had been induced by applying electric fields, the susceptibility of the domains to change under a magnetic field (the effective magnetoelectric coupling parameter) was large. Such large, magnetic field-induced changes resulted in a remanent domain state very similar to the remanent state induced by an electric field. Subsequent magnetic field reversal induced more modest ferroelectric switching.
Resumo:
Winter deicing operations occur extensively in mid- to high-latitude metropolitan regions around the world and result in a significant reduction in road accidents. Deicing salts can, however, pose a major threat to water quality and aquatic organisms. In this paper we examine the utility of Arcellacea (testate amoebae) for monitoring lakes that have become contaminated by winter deicing salts, particularly sodium chloride. We analysed 50 sediment samples and salt-related water-property variables (chloride concentrations; conductivity) from 15 lakes in the Greater Toronto Area and adjacent areas of southern Ontario, Canada. The sampled lakes included lakes in proximity to major highways and suburban roads, and control lakes in forested settings away from road influences. Samples from the most contaminated lakes, with chloride concentrations in excess of 400 mg/l and conductivities of >800 μS/cm, were dominated by species typically found in brackish and/or inhospitable lake environments and by lower faunal diversities (lowest Shannon Diversity Index values) than samples with lower readings. Q-R-mode cluster analysis and Detrended Correspondence Analysis (DCA) resulted in the recognition of four assemblage groupings. These reflect varying levels of salt contamination in the study lakes, along with other local influences, including nutrient loading. The response to nutrients can, however, be isolated if the planktic eutrophic indicator species Cucurbitella tricuspis is removed from the counts. The findings show that the group have considerable potential for biomonitoring in salt-contaminated lakes, and through application to lake sediment cores, may provide significant insights into long-term benthic community health, which is integral for remedial efforts.
Resumo:
Epitaxial (001)-oriented 0.7Pb(Mg0.33Nb0.67)O3-0.3PbTiO3 (PMN-PT) thin films were deposited by pulsed laser deposition on vicinal SrTiO3 (001) substrates using La0.7Sr0.3MnO3 as bottom electrode. Detailed microstructural investigations of these films were carried out using X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM). Polarization-field hysteresis curves were measured at room temperature. Spontaneous polarization P s , remnant polarization P r and coercive voltage V c were found to be 25 μC/cm2, 15 μC/cm2 and 0.81 V, respectively. Field dependent dielectric constant measurements exhibited butterfly shaped curves, indicating the true ferroelectric nature of these films at room temperature. The dielectric constant and the dielectric loss at 100 kHz were found to be 238 and 0.14, respectively. The local piezoelectric properties of PMN-PT films were investigated by piezoelectric force microscopy and were found to exhibit a local piezoelectric coefficient of 7.8 pm/V.
Resumo:
Domain microstructures in single crystal lamellae of 88%Pb(Zn1/3Nb2/3)O3-12%PbTiO3 (cut from bulk using focused ion beam milling) have been mapped using both piezoresponse force microscopy and transmission electron microscopy. Dramatic changes from mottled microstructures typical of relaxors to larger scale domains typical of ferroelectrics have been noted. Stresses associated with substrate clamping are suspected as the cause for the transition from short- to long-range polar order, akin to effects induced by cation ordering achieved by thermal quenching.
Resumo:
There is interest in determining levels of Mycobacterium avium subsp. paratuberculosis (MAP) contamination in milk. The optimal sample preparation for raw cows' milk to ensure accurate enumeration of viable MAP by the peptide-mediated magnetic separation (PMS)-phage assay was determined. Results indicated that milk samples should be refrigerated at 4 C after collection and MAP testing should commence within 24 h, or samples can be frozen at 70 C for up to one month without loss of MAP viability. Use of Bronopol is not advised as MAP viability is affected. The vast majority (>95%) of MAP in raw milk sedimented to the pellet upon centrifugation at 2500 g for 15 min, so this milk fraction should be tested. De-clumping of MAP cells was most effectively achieved by ultrasonication of the resuspended milk pellet on ice in a sonicator bath at 37 kHz for 4 min in ‘Pulse’ mode.
Resumo:
The coupling between magnetization and polarization in a room temperature multiferroic (Pb(Zr,Ti)O3–Pb(Fe,Ta)O3) is explored by monitoring changes in capacitance that occur when a magnetic field is applied in each of three orthogonal directions. Magnetocapacitance effects, consistent with P2M2 coupling, are strongest when fields are applied in the plane of the single crystal sheet investigated.
Resumo:
In this study we have investigated the uptake and distribution of arsenic (As) and phosphate (Pi) in roots, shoots, and grain of wheat grown in an uncontaminated soil irrigated with solutions containing As at three different concentrations (0.5, 1 and 2 mg l-1) and in the presence or in the absence of P fertilization. Arsenic in irrigation water reduced plants growth and decreased grain yield. When Pi was not added (P-), plants were more greatly impacted compared to the plus Pi (P+) treatments. The differences in mean biomass between P- and P+ treatments at the higher As concentrations demonstrated the role of Pi in preventing As toxicity and growth inhibition. Arsenic concentrations in root, shoot and grain increased with increasing As concentration in irrigation water. It appears that P fertilization minimizes the translocation of As to the shoots and grain whilst enhancing P status of plant. The observation that P fertilization minimises the translocation of arsenic to the shoots and grain is interesting and may be useful for certain regions of the world that has high levels of As in groundwater or soils. © 2008 Springer Science+Business Media B.V.
Resumo:
Mining and metallurgical industries are the most responsible for heavy metal contamination. These contaminants are often associated to poor management strategies and the lack of suitable containment areas. This is the case of one of the largest metal alloy producers in the São Francisco river basin, in Minas Gerais state, Brazil. During operation, the tailings of this activity have been accumulated in the surrounding area, leading to heavy metal contamination (Mn, Cu, Zn, Ni, Pb, Cd, Cr and As), much above the critical levels, which accumulate in the sediments of the nearby waterways, in the soils of the drainage area, and in the water column. In this work we are going to discuss both the contamination level and its extent in the Consciência river, a small tributary of the São Francisco river, the longest river entirely Brazilian, by analyzing the geochemistry and mineralogy of the accumulated sediments. It will be also discuss the reclamation strategies of this site and the impact on the environment.
Resumo:
A ilha de Santiago é a maior do arquipélago de Cabo Verde, apresenta uma área de 991 km2, com um comprimento e largura máximos de 54,9 km e 29 km, respectivamente, e 1392 m de maior altitude. As condições climáticas e a erosão são alguns dos problemas naturais do arquipélago de Cabo Verde. Além disso, a intervenção humana no ambiente superficial revela-se muitas vezes inadequada e com forte impacto. A construção em solos com aptidão agrícola ou florestal, as actividades industriais, a deposição de materiais sólidos ou líquidos de forma inadequada, as práticas agrícolas incorrectas e intensivas, o uso abusivo de pesticidas e fertilizantes, a rega com água contaminada, a sobreexploração de aquíferos que levam muitas vezes à salinização, etc. têm enorme impacto em termos de contaminação de solos, águas superficiais e subterrâneas nas áreas envolventes. Por conseguinte, o conhecimento da variabilidade geoquímica natural é fundamental para a resolução de questões de índole económica, ambiental e de ordenamento do território, médica, e jurídica. A necessidade de construir uma base de dados de geoquímica georeferenciada que caracterize o ambiente superficial da ilha de Santiago foi a principal motivação para a realização deste estudo. Realizou-se um levantamento geoquímico de 337 amostras de sedimentos de corrente e 249 amostras de solos na ilha de Santiago, tendo sido seguidas as recomendações do Projecto Internacional IGCP 259 não só na fase de amostragem, mas também nas fases seguintes de preparação, análise, tratamento dos dados e elaboração de mapas. Determinaram-se os teores, na fracção < 2 mm, para 36 elementos – 9 elementos maiores (Al, Ca, Fe, K, Mg, Mn, Na, P, Ti) e 27 elementos vestigiais (Ag, As, Au, B, Ba, Bi, Cd, Co, Cr, Cu, Ga, Hg, La, Mo, Ni, Pb, S, Sb, Sc, Se, Sr, Th, Tl, U, V, W, Zn). Efectuou-se ainda a análise textural e estudou-se a composição mineralógica de cerca de 25% das amostras. Analisaram-se, também, 103 amostras de rochas, colhidas nas várias formações da ilha de Santiago, tendo sido determinados os teores de K2O, Na2O, Fe2O3(T), MnO, Sc, Cr, Co, Zn, Ga, As, Br, Rb, Zr, Sb, Cs, Ba, Hf, Ta, W, Th e U e REE, a fim de se fazer uma comparação com os teores destes elementos encontrados nos solos e sedimentos de corrente, averiguando se a sua variação é ou não essencialmente condicionada pela geoquímica da rocha-mãe. Os padrões geoquímicos obtidos através dos mapas de distribuição espacial foram correlacionados com a natureza da rocha mãe, o tipo de solo, e ainda com algumas fontes de contaminação. A interpretação dos resultados foi realizada não só pela observação dos mapas geoquímicos, mas também após análise estatística dos conjuntos de dados obtidos, e apoiada em informação diversa disponível. A utilização da Análise de Componentes Principais permitiu distinguir associações entre elementos químicos, quer de origem geogénica quer antropogénica. Foram ainda elaborados mapas de distribuição espacial de vários índices multielementares de importância ambiental, como o Índice de Acidificação Al/(Ca+Mg+K), Índice de Combi, Índice de Avaliação de Risco Ambiental e Índices de Enriquecimento/Contaminação para vários grupos de elementos considerados como “primary pollutant metals”.
Resumo:
A toxicidade dos metais é uma problemática que envolve a saúde humana e o ambiente, sendo necessária uma vigilância constante e uma avaliação dos danos precisa e robusta. As plantas, como principal fonte alimentar e de produtos, são de vital importância à sociedade humana. Devido a serem seres sesseis, este grupo é um dos mais afectados por poluentes, tornandoos objectos de estudo extremamente interessantes. O objectivo desta tese foi avaliar os efeitos genotóxicos e citotóxicos do Cr(VI) e Pb2+ na espécie modelo Pisum sativum L. No capitulo I é introduzida a problemática da toxicidade de ambos os metais, com especial relevo nas plantas, bem como as abordagens mais actuais no estudo da geno e citotoxicidade. No capitulo II são apresentados os resultados dos estudos da genotoxicidade do Pb2+ (II-1) e Cr(VI) (II-2 e II-3), tendo sido realizados analises de dano ao DNA a vários níveis e alterações do ciclo celular (II-1 e II-2), bem como a detecção de instabilidade de microssatelites (II-1 e II-3), que é um indicador do estado funcional do mecanismo de reparação do DNA. O capítulo III aborda o efeito de stresses abióticos na capacidade fotossintética da espécie modelo. No capítulo III-1, realizou-se um estudo pioneiro de avaliação da aplicabilidade da citometria de fluxo no estudo da fotossíntese, mais concretamente no estado funcional e estrutural dos cloroplastos, quando expostos a um inibidor da fotossíntese (Paraquat). Os dados obtidos neste estudo encorajaram a aplicação da técnica nos capítulos III-2 e III-3, nos quais se analisaram os efeitos dos metais Pb2+ (III- 2) e Cr(VI) (III-3) na capacidade fotossintética de plantas expostas a este metal; em estudos que envolveram vários marcadores clássicos, para alem dos da citometria de fluxo. Finalmente, no capítulo IV são apresentadas as conclusões finais do trabalho, uma comparativa entre os efeitos e níveis de toxicidade dos dois metais em estudo e são apontadas algumas perspectivas para futuros estudos, levantadas pelos dados obtidos.
Resumo:
The main purpose of this PhD thesis was to provide convincing demonstration for a breakthrough concept of pyroelectrolysis at laboratory scale. One attempted to identify fundamental objections and/or the most critical constraints, to propose workable concepts for the overall process and for feasible electrodes, and to establish the main requirements on a clearer basis. The main effort was dedicated to studying suitable anode materials to be developed for large scale industrial units with molten silicate electrolyte. This concept relies on consumable anodes based on iron oxides, and a liquid Fe cathode, separated from the refractory materials by a freeze lining (solid) layer. In addition, one assessed an alternative concept of pyroelectrolysis with electron blocking membranes, and developed a prototype at small laboratory scale. The main composition of the molten electrolyte was based on a magnesium aluminosilicate composition, with minimum liquidus temperature, and with different additions of iron oxide. One studied the dynamics of devitrification of these melts, crystallization of iron oxides or other phases, and Fe2+/Fe3+ redox changes under laser zone melting, at different pulling rates. These studies were intended to provide guidelines for dissolution of raw materials (iron oxides) in the molten electrolyte, to assess compatibility with magnetite based consumable anodes, and to account for thermal gradients or insufficient thermal management in large scale cells. Several laboratory scale prototype cells were used to demonstrate the concept of pyroelectrolysis with electron blocking, and to identify the most critical issues and challenges. Operation with and without electron blocking provided useful information on transport properties of the molten electrolyte (i.e., ionic and electronic conductivities), their expected dependence on anodic and cathodic overpotentials, limitations in faradaic efficiency, and onset of side electrochemical reactions. The concept of consumable anodes was based on magnetite and derived spinel compositions, for their expected redox stability at high temperatures, even under oxidising conditions. Spinel compositions were designed for prospective gains in refractoriness and redox stability in wider ranges of conditions (T, pO2 and anodic overpotentials), without excessive penalty for electrical conductivity, thermomechanical stability or other requirements. Composition changes were also mainly based on components of the molten aluminosilicate melt, to avoid undue contamination and to minimize the dissolution rate of consumable anodes. Additional changes in composition were intended for prospective pyroelectrolysis of Fe alloys, with additions of different elements (Cr, Mn, Ni, Ti).