Estudos de Durabilidade Frente ao Ataque Ácido de Compósitos Portland-Polímero para Cimentação de Poços de Petróleo

Portland-polymers composites are promising candidates to be used as cementing material in Northeastern oil wells of Brazil containing heavy oils submitted to steam injection. In this way, it is necessary to evaluate its degradation in the commonly acidizind agents. In addition, to identify how aggressive are the different hostile environments it is an important contribution on the decision of the acidic systems to be used in. It was investigated the performance of the Portland-polymer composites using powdered polyurethane, aqueous polyurethane, rubber tire residues and a biopolymer, those were reinforced with polished carbon steel SAE 1045 to make the electrochemical measurements. HCl 15,0 %, HCl 6,0 % + HF 1,5 % (soft mud acid), HCl 12,0 % + HF 3,0 % (regular mud acid) and HAc 10 % + HF 1,5 % were used as degrading environment and electrolytes. The more aggressive acid solution to the plain Portland hardened cement paste was the regular mud acid, that showed loss of weight around 23.0 %, followed by the soft mud acid, the showed 11.0 %, 15.0 % HCl with 7,0 % and, at last the 10.0 % HAc plus HF 1.5 % with just 1.0 %. The powdered polyurethane-composite and the aqueous polyurethane one showed larger durability, with reduction around 87.0 % on the loss of weight in regular mud acid. The acid attack is superficial and it occurs as an action layer, where the degraded layer is responsible for the decrease on the kinetic of the degrading process. This behavior can be seen mainly on the Portland- aqueous polyurethane composite, because the degraded layer is impregnated with chemically modified polymer. The fact of the acid attack does not have influence on the compressive strength or fratography of the samples, in a general way, confirms that theory. The mechanism of the efficiency of the Portland-polymers composites subjected to acid attack is due to decreased porosity and permeability related with the plain Portland paste, minor quantity of Ca+2, element preferentially leached to the acidic solution, wave effect and to substitute part of the degrading bulk for the polymeric one. The electrolyte HAc 10 % + HF 1,5 % was the least aggressive one to the external corrosion of the casing, showing open circuit potentials around +250 mV compared to -130 mV to the simulated pore solution to the first 24 hours immersion. This behavior has been performed for two months at least. Similar corrosion rates were showed between both of the electrolytes, around 0.01 μA.cm-2. Total impedance values, insipient arcs and big polarization resistance capacitive arcs on the Nyquist plots, indicating passivity process, confirm its efficiency. In this way, Portlandpolymers composites are possible solutions to be succeed applied to oilwell cementing concomitant submitted to steam injection and acidizing operation and the HAc 10,0 % + HF 1,5 % is the less aggressive solution to the external corrosion of the casing

Biocompósitos poliméricos obtidos a partir da fração lignocelulósica e amilácea do caroço de manga (mangifera indica), Tommy atkins

This employment has the function the utilization of mango seeds Tommy Atkins, like starch source to obtain biopolymers and fibers source and nanowhiskers cellulose also, that will be use like reinforcing fillers in micro and nanobiocomposites polymeric. The fibers in natura removed from tegument mango seed were characterized, as weel as the treated fibers and nanowhiskers of cellulose extracted from them. The starch extracted from seed s almond showed a good performance (32%) and a high purity. The chemicals analyzes, of crystallinity and morphological of the fibers in natura, treated fibers and nanowhiskers of cellulose confirmed the efficacy of the chemical treatement performed to remove amorphous constituents (hemicellulose and lignina). The thermoplastic starch (TPS) obtained from two sources, corn starch and starchy material mango, was produced in a twin screw extruder with compositon mass of 62,5% of starch, 9,4% of water and 28,1% of glycerol. The starch material mango was the main objective of this work for the production of biodegradable materials, and the starch corn was utilized during the production stage to evaluate the processability of the starch and use as parameter for comparison, according of being a conventional source for obtaining conventional comercial starch. The incorporation of fibers (6% in mass) and nanowhiskers cellulose (1% in mass) in matrix of TPS to obtain composite and nanocomposite, respectively, it was performed in single screw extruder. The biocomposites and bionanocomposites polymeric were obtained and the TPS from starchy material mango presented better results of thermal and mechanicals properties when compared to TPS corn starch. Concludes that the sediment generated of the agroindustrial processing mango used presents potencial to producing of biodegradables materials

Sistemas de medição de desempenho para projetos de PD&I no Setor de Petróleo e Gás Natural

Organizations are seeking new ideas, tools and methods aiming to improve management process and performance. On the other hand, system performance measurement needs to portray organizational changes and provide managers with a set of true and more appropriate information for the decision-making process. This work aims to propose a performance measurement system in the academic field regarding Research, Development and Innovation (RDI) in the oil and gas industry. The research performed a bibliographic review in a descriptive exploratory manner. A field research was conducted with an expert focus group in order to gather new indicators. As for the validation of these indicators, a survey with experienced professional was also realized. The research surveyed four segments in and outside of the Federal University of Rio Grande do Norte-Brazil such as oil and gas project coordinators, staff at Academic Planning Offices, FUNPEC employees as well as coordinators from Petrobrás. The performance measuring system created from this study features three interrelated performance indicators pointed out as: process indicators, outcome indicators and global indicators. The proposal includes performance indicators that seek to establish more appropriate strategies for effective institution management. It might help policy making of university-industry interaction policies

Ciência e espiritualidade: conversas com pacientes terminais

It has been reflected on Science and spirituality having as focus the relation between them and the process lived by terminal patients after the confirmation of the finitude of their lives. It has searched with this research to excite discussions that corroborate the tematization of a possible dialogue between science and spirituality, signaling perspectives of debates and formation of an understanding of the problematic that involves these human constructs in the development of alternatives for the understanding of the life finitude. We point out the moment of split between science and spirituality through the cartesian paradigm from a historical approach and after focusing the illness and death as foundation for our discussion. We use as methodological strategy, focal talks with terminal patients having as guidance a guideline with five punctuations: the singular citizen, diagnosis impacts, indicators of science, spirituality marks and death fear that served of base for analysis and data interpretation in according to selected theoretical foundations. Thus, it was possible to perceive that science, although not to keep an explicit dialogue with spirituality, it has pointed through is representation forms to the process indicatives that will culminate with the death. And these indicators had shown that in this direction it is efficient. We believe that the confrontation of the death can happen through of a new science that dialogues with the spirituality, where does not have separation between reason and emotion on the part of science; as well as it does not have reason disdain on the part of the spirituality

O uso pedagógico das TIC como expansão das capacidades : o ProInfo Natal/RN

The broad objective of the research The pedagogic use of ICT as development of teaching capacity: the case of ProInfo Natal/RN was to realize an evaluation of this program effectiveness in public schools. Specifically, we ve tried to observe if the program: a) succeeded by promoting the pedagogical use of new ICTs, b) stimulated the improvement of teaching and learning using ICT, and c) performed functionings and expanding its capabilities. The methodology consisted of literature revision; realization of half-structured interviews with administrators and teachers, and leading four focal groups with students in 9th grade of elementary school, were also made observations and analysis about the official documents which regulates the program. Our results showed that ProInfo presents various interferences in its effectiveness, causing a gap between its marks and the actual results of its use in everyday life of schools. We ve concluded that the program needs to challenge these weaknesses in order to contribute to the promotion of functionings and expanding its capabilities

Indicadores zootécnicos e econômicos da tilapicultura em tanques-rede de diferentes dimensões

The present study aimed to compare the main zootechnical and economic indicators of farming tilapia in superintensive system developed in two different net cages dimensions: 6 and 18 m(3). Were used 12,960 juveniles male reversed Nile tilapia (Oreochromis niloticus), strain supreme, with an initial average weight of 32.0 g (+/- 0.85) for 6 m(3) net cages and 88.5 g (+/- 0.96) for 18 m(3) net cages. The fish were fed three times a day with commercial extruded ration, crude protein levels from 40 to 32%, particle size from 2 to 8 mm and daily feeding rate starting with 8% of live weight (LW), decreasing up to 1% LW. It was conclued that, although no statistical difference in most indicators zootechnical (P>0.05), the production of tilapias in bigger net cages resulted in lower average total cost and higher rentability per kg of fish produced, 34.4% higher, resulting in better profitability.

Desenvolvimento e validação de modelo de previsão para mancha preta dos citros em função de variáveis meteorológicas

A mancha preta dos citros é uma doença causada pelo fungo Guignardia citricarpa que produz lesões em frutos em variedades de laranja doce comerciais, causando a queda precoce dos frutos, diminuindo a produtividade e levando a sua depreciação para o mercado de fruta fresca. O objetivo do trabalho foi desenvolver e validar um modelo de favorabilidade climática da mancha preta dos citros relacionado a ocorrência dos sintomas da doença no Estado de São Paulo. Desenvolveu-se um sistema empírico com base em um banco de dados da ocorrência da doença e das condições climáticas, em campo, nos municípios de Barretos/SP e Gavião Peixoto/SP, durante as Safras 2007/2008 e 2008/2009. A variedade de laranjeira doce utilizada nos experimentos foi a 'Valência' enxertada sobre limoeiro 'Cravo', com 10 anos de idade. Para a incidência da mancha preta foi avaliada a porcentagem de frutos com sintomas na planta e para a severidade, a porcentagem de casca lesionada por fruto. Na análise de regressão as variáveis climáticas e os dados de intensidade de doença de Barretos foram selecionados no procedimento 'stepwise'. As melhores equações de regressão foram selecionadas pelo coeficiente de determinação (R²) e pela significância da regressão no teste F (P < 0,05 e P < 0,01) que resultou na equação Y= -502,43 + 9,61 X10 + 4,78 X30 + 0,54 X46 - 7,9 X50 em que Y=Índice de Favorabilidade, X10 é a temperatura média, X30 é a umidade relativa média, X46 é o molhamento foliar e X50 é a temperatura média durante o molhamento foliar, determinados com dados de intervalos de sete dias. Procedeu-se a validação no campo no município de Gavião Peixoto durante a Safra 2008/2009, realizando a correlação entre a incidência e severidade observadas no experimento e os dados previstos que foram os determinados pela equação, sendo que a correlação mostrou-se positiva para a incidência da doença com um R²=0,87.

Efeito do ácido alfa-lipóico sobre biomarcadores de estresse oxidativo, inflamação e fatores de risco cardiovascular em hipertensos

Alpha-lipoic acid (ALA) is a potent antioxidant with favourable anti-inflammatory, metabolic and endothelial effects, and has been widely investigated due to its potential against cardiovascular risk factors. This study aimed to evaluate the effect of oral ALA supplementation on oxidative stress biomarkers, inflammation and cardiovascular risk factors in patients with hypertension. This is a double-blind placebo-controlled randomized clinical trial, where the intervention was evaluated prospectively comparing results in both groups. The sample consisted of 64 hypertensive patients who were randomly distributed into ALA group (n = 32), receiving 600 mg / day ALA for twelve weeks and control group (n = 32), receiving placebo for the same period. The following parameters were evaluated before and after intervention: lipid peroxidation, content of reduced glutathione (GSH), enzymatic activities of glutathione peroxidase (GPx) and superoxide dismustase, ultrasensitive C-reactive protein (hs-CRP), triglycerides, total cholesterol and fractions, fasting glucose and anthropometric indicators. There was a statistically significant reduction (p <0.05) in serum concentrations of total cholesterol, very low density lipoprotein (VLDL), high density lipoprotein (HDL), triglycerides and blood glucose. There was a reduction in body weight and waist, abdominal and hip circumferences in the group that received ALA. In addition, there was a statistically significant increase (p <0.05) in the contents of reduced glutathione (GSH) and glutathione peroxidase (GPx) in the group receiving ALA. Oral administration of ALA appears to be a valuable adjuvant therapy, which may contribute to decrease the damage caused by oxidative stress and other risk factors associated with the atherosclerotic process

Neuropatia paraneoplásica associada ao mastocitoma canino

As síndromes paraneoplásicas compreendem um grupo diverso de alterações clínicas associadas a neoplasias e ocorrem em sítios distantes do tumor primário ou de suas metástases. As neuropatias paraneoplásicas são distúrbios raros em cães, mas representam morbidade significativa e servem como importantes indicadores diagnósticos e prognósticos. O presente trabalho relata a ocorrência de dois casos de neuropatia paraneoplásica em cães com mastocitoma, considerando a apresentação clínica, o diagnóstico e as formas de tratamento utilizadas.

As zonas de processamento de exportação como instrumento de desenvolvimento e redução das desigualdades regionais

The existence of inequalities among the Brazilian regions is an indeed fact along the country s history. Before this reality the constitutional legislator inserted into the Federal Constitution of 1988, as a purpose of the Federative Republic of Brazil, the reduction of regional inequalities. The development has also been included as a purpose from the State, because there is an straight relation with the reduction of regional inequalities. In both situations is searched the improvement of people s living conditions. . In pursuit of this achievement, the State must implement public policy, and, for this to happen, it needs the ingress of income inside of the public coffers and support of economic agents, therefore the importance of constitucionalization of the economic policy. The 1988 s Constitution adopted a rational capitalism regime consentaneous with current legal and social conceptions, that s why it enabled the State s intervention into economy to correct the so-called market failures or to make the established objectives fulfilled. About this last one, the intervention may happen by induction through the adoption of regulatory Standards of incentive or disincentive of economic activity. Among the possible inductive ways there are the tax assessments that aim to stimulate the economic agents behavior in view of finding that the development doesn t occur with the same intensity in all of the country s regions. Inside this context there are the Export Processing Zones (EPZs) which are special areas with different customs regime by the granting of benefits to the companies that are installed there. The EPZs have been used, by several countries, in order to develop certain regions, and economic indicators show that they promoted economic and social changes in the places where they are installed, especially because, by attracting companies, they provide job creation, industrialization and increased exports. In Brazil, they can contribute decisively to overcome major obstacles or decrease the attraction of economic agents and economic development of the country. In the case of an instrument known to be effective to achieve the goals established by the Constitution, it is duty of the Executive to push for the law that governs this customs regime is effectively applied. If the Executive doesn t fulfill this duty, incurs into unjustifiable omission, correction likely by the Judiciary, whose mission is to prevent acts or omissions contrary to constitutional order

Avaliação do impacto do plano de expansão da rede federal na qualidade dos institutos federais de educação segundo indicadores de desempenho

The Expansion Plan of the Federal Network of Vocational Education foresees the construction of 860 new units of instruction until 2020, representing a strong growth against the 140 existing units prior to its disclosure by Federal Government of Brazil, in 2005. The Federal Institutes of Education, Science and Technology have been performing the expansion while experiencing the shortcomings and challenges of units still in development, created in previous phases of the Plan. The quality of the services of these institutions has been evaluated by the control bodies, which require the submission of performance indicators in annual management reports of institutions under their jurisdiction. In this context of expansion process, particularly, is desirable to identify possible changes in quality standards. Thus, this research was motivated by the following problem: there was difference in the performance of the Federal Institutes of Education, Science and Technology after the inauguration of the first units of phase II of the Expansion Plan of the Federal Network of Vocational Education? This is an exploratory-descriptive, ex-post-facto, quantitative approach research, which aims to contribute to the knowledge of the impact of the expansion of the Federal Network. The data were collected from 12 indicators presented in management reports of 38 Federal Institutes through years 2007 to 2011 to evaluate the performances using descriptive statistical techniques. The indicators were analyzed in both consolidated and open manners by the following perspectives: country region, growth of instruction units and institutions origin. Was also performed a multivariate analysis of clusters in order to identify excellence groups of Institutes. The results showed differences in the expansion plan s development among Brazilian regions, both in terms of infrastructure and academic indicators, with better results in the Midwest and South, and that there are differentiated profiles of institutes as its origin, where the best quality indicators occur in those originated by integration of different educational institutions. Still, were identified two excellence groups, with emphasis on academic management, human resources and expansion

Custo de produção do maracujá-amarelo (Passiflora edulis)

Objetivou-se analisar economicamente a cultura do maracujá-amarelo (Passiflora edulis) na região de Marília-SP, safra de 2010/2011. Foram utilizadas estruturas do custo operacional efetivo e custo operacional total referente à fase de implantação e condução da lavoura por unidade de área e cinco indicadores de rentabilidade. Identificou-se um custo total de produção de R$ 37.751,67 por hectare ou R$ 1,89 por quilo da fruta. Os itens do custo operacional efetivo que mais oneraram o sistema de produção corresponderam às operações de máquinas (31,1%) e mão de obra (23,5%). Os indicadores de rentabilidade mostraram-se desfavoráveis para o sistema produtivo analisado, em decorrência, principalmente, do alto preço dos insumos e práticas para controle de doenças. Há necessidade de adequações técnicas relacionadas com o manejo fitossanitário da cultura para a redução do custo total de produção de modo a tornar a atividade rentável.

Análise do efeito do tempo da moagem de alta energia no tamanho de cristalito e microdeformação da rede cristalina do WC-Co

Hard metals are the composite developed in 1923 by Karl Schröter, with wide application because high hardness, wear resistance and toughness. It is compound by a brittle phase WC and a ductile phase Co. Mechanical properties of hardmetals are strongly dependent on the microstructure of the WC Co, and additionally affected by the microstructure of WC powders before sintering. An important feature is that the toughness and the hardness increase simultaneously with the refining of WC. Therefore, development of nanostructured WC Co hardmetal has been extensively studied. There are many methods to manufacture WC-Co hard metals, including spraying conversion process, co-precipitation, displacement reaction process, mechanochemical synthesis and high energy ball milling. High energy ball milling is a simple and efficient way of manufacturing the fine powder with nanostructure. In this process, the continuous impacts on the powders promote pronounced changes and the brittle phase is refined until nanometric scale, bring into ductile matrix, and this ductile phase is deformed, re-welded and hardened. The goal of this work was investigate the effects of highenergy milling time in the micro structural changes in the WC-Co particulate composite, particularly in the refinement of the crystallite size and lattice strain. The starting powders were WC (average particle size D50 0.87 μm) supplied by Wolfram, Berglau-u. Hutten - GMBH and Co (average particle size D50 0.93 μm) supplied by H.C.Starck. Mixing 90% WC and 10% Co in planetary ball milling at 2, 10, 20, 50, 70, 100 and 150 hours, BPR 15:1, 400 rpm. The starting powders and the milled particulate composite samples were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) to identify phases and morphology. The crystallite size and lattice strain were measured by Rietveld s method. This procedure allowed obtaining more precise information about the influence of each one in the microstructure. The results show that high energy milling is efficient manufacturing process of WC-Co composite, and the milling time have great influence in the microstructure of the final particles, crushing and dispersing the finely WC nanometric order in the Co particles

Análise econômica da produção do Maracujazeiro amarelo em sistemas orgânico e convencional

This work was carried out in the city of Maringa, located in the Northwest region of Parana, with the aim of analyzing economically the yellow passion fruit crop (Passiflora edulis Sims. f. flavicarpa Deg.), comparing organic and conventional production systems. To estimate technical coefficients, planting and production costs, and profitability indicators of culture, the data were surveyed from technicians of the region and based in experimental work, carried out at the Experimental Farm of lguaterm from the Maringa State University, in the period of june/2002 to july/2004. The total production costs of the culture in two agricultural years reached a value 12.94% higher for the conventional system, and in this same period the medium index of profitability was 21.39% higher for the organic system. The organic production system was economically feasible and provided a larger index of profitability.

Estudo da presença de entalhes semicirculares em compósitos poliméricos híbridos

Composite materials have a wide application in various sectors, such as the medical field in the manufacture of prostheses, in automotive and aerospace. Thus it is essential to the development of new composite and a better understanding in the face of various loading conditions and service. Several structural elements are manufactured in the presence of geometric discontinuity (notch, hole, etc ) in their longitudinal sections and/or cross-cutting, and these affect the mechanical response of these elements. The objective is to study the mechanical response of laminated polymer matrix hybrid composites reinforced with glass fiber/jute in a uniaxial tensile test. The mechanical response takes in account both the influence of the presence of a geometric discontinuity (semicircular notches) and the orientation of fibers in the layers (anisotropy). The semicircular notches are located in longitudinal section (with a reduction in cross section) of the same. In this analysis, the anisotropy is characterized by types of configurations (with different orientations of fibers in the outer layers). A comparative study of mechanical properties with and without the presence of notches is developed. Both configurations consist of four layers of woven jute fiber bidirectional and a central layer of bidirectional woven glass fibers. In addition to the mechanical properties was also studied the characteristics of the fracture developed in each composite laminate. The results showed that in the comparative study, the anisotropy and the presence of semicircular notches directly influences the mechanical behavior of laminates composites, mainly in reducing the tensile strength, and well as the final characteristics of the fracture