Efficiency of geotextile filters in dewatering wastes (sludge) from water treatment works

This paper evaluates the efficiency of geotextile filters for sludge from a compact water treatment plant (WTP). The key aspects required in the methodology of selection and designing geotextile filters for sludge from dewatering was investigated based on laboratory tests results. The analyses were supported by the measured filtrated volume of water and turbidity resulting from variable head permeability tests carried out in two geotextiles and using the conventional granular filter (sand and gravel). The results of the present study showed that more than 75% of the dewatering sludge can be filtrated with low turbidity, which permits that this water can return to the treatment plan in order to be reuse in another cycle. The reduced volume of sludge retained by the geotextile that is transferred to the drying pound increases its efficiency by reducing the drying time. The low volume of the dry waste can be removed and the geotextile can be easily cleaned or replaced when needed. These procedures significantly reduce the volume of water needed in dewatering and also avoids waste discharges in the environment.

Environmental education and the health risk question: how do we educate the educators working with this theme?

Our society is presently seeing a trend of continuous increase of risk with severe consequences, especially those linked to environmental aspects. It has obligated us to reflect on this production and its effects, either positive or negative, and, after a long reflection, to think about the adopted model of civilization and the possibilities of changing such a model. The educational institution is among the social departments responsible for this revision process, since it represents one possibility to promote a more critical vision from society, providing it with tools needed for a more responsible action. However, schools are dominated by a traditional work, which does not allow for enough and proper attention to these relevant and current questions, and which involve a critical analysis of the conceptions and values established by our civilization, resulting in the present patterns of science-technology-society relations and their influence on the environment and health. Several research works have indicated a diversity of barriers that obstruct this necessary change. Since formal education plays an important role in the education of society for this theme, in this paper the possibilities and difficulty dealing with this problem are discussed, focusing on the question of teacher education, based on investigations related to teacher education programs for environmental education. The data collected show the urgency for introducing this theme in teacher training programs, taking into account the fact that educators have their own conceptions, values and attitudes that should be considered in these programs.

The effect of drying and urea treatment on nutritional and anti-nutritional components of browses collected during wet and dry seasons

Fibre, crude protein and tannin concentrations were measured in browse species from the semi-arid region of Northeast Brazil during the dry and wet seasons. The effects of oven-, sun- and shade-drying and of urea treatment were also determined. Crude protein (CP) content varied from 103 to 161 g/kg dry matter (DM) and the browses had similar CP content in the two seasons (during 2002) (102-161 and 107-153 g/kg DM in the wet and dry seasons, respectively). Total tannin concentrations ranged from 13 to 201 g/kg DM amongst the browses and were higher in the dry season. A 30-d treatment with urea reduced extractable tannins significantly (P < 0.05). The urea treatment was also most effective at reducing the in vitro effects of tannins compared to the other drying treatments. This was demonstrated by measuring the effect of polyethylene glycol (PEG) on gas production. Addition of PEG increased gas production of oven- (81.4%), sun- (78.5%) and shade-dried (76.7%) samples much more compared to urea treated samples (10.9%). (c) 2005 Elsevier B.V. All rights reserved.

A neural network-based preset generation tool for a steel tandem cold mill

This paper traces the development of a software tool, based oil a combination of artificial neural networks (ANN) and a few process equations. aiming to serve as a backup operation instrument in the reference generation for real-time controllers of a steel tandem cold mill By emulating the mathematical model responsible for generating presets under normal operational conditions, the system works as ail option to maintain plant operation in the event of a failure in the processing unit that executes the mathematical model. The system, built from the production data collected over six years of plant operation, steered to the replacement of the former backup operation mode (based oil a lookup table). which degraded both product quality and plant productivity. The study showed that ANN are appropriated tools for the intended purpose and that by this instrument it is possible to achieve nearly the totality of the presets needed by this land of process. The text characterizes the problem, relates the investigated options to solve it. justifies the choice of the ANN approach, describes the methodology and system implementation and, finally, shows and discusses the attained results. (C) 2009 Elsevier Ltd. All rights reserved

Neural network detection of grinding burn from acoustic emission

An artificial neural network (ANN) approach is proposed for the detection of workpiece `burn', the undesirable change in metallurgical properties of the material produced by overly aggressive or otherwise inappropriate grinding. The grinding acoustic emission (AE) signals for 52100 bearing steel were collected and digested to extract feature vectors that appear to be suitable for ANN processing. Two feature vectors are represented: one concerning band power, kurtosis and skew; and the other autoregressive (AR) coefficients. The result (burn or no-burn) of the signals was identified on the basis of hardness and profile tests after grinding. The trained neural network works remarkably well for burn detection. Other signal-processing approaches are also discussed, and among them the constant false-alarm rate (CFAR) power law and the mean-value deviance (MVD) prove useful.

Contribuição ao protocolo de controle de qualidade da própolis e de seus extratos

A quality control protocol for the analysis of propolis and its extracts is proposed in the present work. Propolis of Apis mellifera L. bees collected in beehives of an apiary located in the northwest of the Paraná State was triturated and submitted to the following analysis: particles medium size determination, loss of dry, ashes drift, waxes drift, drift of extractive (in water and in ethanol) and total flavonoids drift determination. Propolis ethanolic extracts (96 °GL) at 10% (w/w) and at 30% (w/w) were prepared and submitted to the determination of the pH, relative density, dry residue, alcoholic drift and total flavonoids drift determination. Propolis was analyzed, through High Performance Liquid Cromatography (HPLC). Comparing the obtained results with other works, it was observed that is possible to establish the intervals of values for parameters in order to evaluate the quality of a propolis sample and its extracts.

Standardization of platelet parameters determination in blood samples collected with EDTA

The Abbott Cell-Dyn 3000 automated hematological analyzer prepares a histogram of platelet volume, which is measured by a technique using electrical impedance, inferring from its platelet count (PLT), mean platelet volume (MPV) and platelet distribution width (PDW). This equipment also calculates the plateletcrit (PCT). These platelet parameters may be important to evaluate platelet function, but they require standardization, because platelets swell when in contact with ethylenediaminetetra-acetic acid salts, hence an increase in blood sample storage time produces artificially increased results. To assess the effect of storage time on MPV, PLT, PDW and PCT, blood samples from 23 sickle cell anemia patients during steady state (Group I) and 50 from healthy controls (Group II) were placed in Vacutainer® tubes with dipotassium ethylenediaminetetra-acetic acid and measured over a period of 1440 minutes (24 h) at the following times: immediately after the venipuncture (time 0), 15, 30, 60, 120, 240, 360, 480 and 1440 minutes. The mean values of MPV and PCT were significantly increased (p<0.00001) along the storage time in both groups. The mean values of PLT and PDW were practically stable (p>0.05) throughout the storage time in both groups.

Physiological and cellular responses in two populations of the mussel Perna perna collected at different sites from the Coast of São Paulo, Brazil

The physiological conditions of mussels from Ubatuba and Santos and also of organisms transplanted from Ubatuba to Santos were studied by using different techniques. Assays for lysosomal stability were conducted on the haemolymph. Heart rate activity was monitored for 6h. The embryonic development of larvae obtained from the collected mussels was analysed. For all the compared groups of mussels, no significant differences were observed for the cardiac activity monitoring and the embryonic bioassays. The mean Neutral Red (NR) retention time was similar for the animals from Santos and Ubatuba, whereas the organisms transplanted to Santos showed a reduction in the retention time of the dye, indicating damage in the lysosomal membranes. These differences were possibly due to environmental factors, but further investigations are required to confirm this hypothesis.

The use of molecular spectra simulation for diagnostics of reactive flows

The C 2 * radical is used as a system probe tool to the reactive flow diagnostic, and it was chosen due to its large occurrence in plasma and combustion in aeronautics and aerospace applications. The rotational temperatures of C 2 * species were determined by the comparison between experimental and theoretical data. The simulation code was developed by the authors, using C++ language and the object oriented paradigm, and it includes a set of new tools that increase the efficacy of the C 2 * probe to determine the rotational temperature of the system. A brute force approach for the determination of spectral parameters was adopted in this version of the computer code. The statistical parameter c 2 was used as an objective criterion to determine the better match of experimental and synthesized spectra. The results showed that the program works even with low-quality experimental data, typically collected from in situ airborne compact apparatus. The technique was applied to flames of a Bunsen burner, and the rotational temperature of ca. 2100 K was calculated.

The lauraceae collected in brazil by ludwig riedel - I

The species of Lauraceae collected by Ludwig Riedel, excluding Ocotea, are commented and contex-tualized according to the different itineraries he travelled in Brazil, from 1821 to 1836, indicating the localities and dates of collections, whenever possible. To complete this work, two diaries of Riedel have been consulted and the information from them cross-checked with the annotations found on specimen labels. An annotated list of 48 entries provides information on the status of species names and their types, currently accepted names, and collections found in different herbaria. Lectotypes for five names, Aydendron verrucosum var. attenuata, Aydendron parviflorum, Mespilodaphne parviflora, Nectandra spicata, and Oreodaphne fasciculata, are designated. The species of Ocotea collected by Riedel will be treated in part II of this series. © President and Fellows of Harvard College, 2012.

From infant industry to technology exports: the Argentine experience in the international sale of industrial plants and engineering works

Includes bibliography

The lauraceae collected in brazil by ludwig riedel - II. Ocotea

The species of Ocotea (Lauraceae) collected by Ludwig Riedel are commented and contextualized according to the different itineraries he travelled in Brazil, from 1821 to 1836, indicating the localities and dates of collections, whenever possible. To complete this work, two diaries of Riedel have been consulted and the information from them crossed-checked with the annotations found on specimen labels. An annotated list of 44 entries provides information on the status of species names and their types, currently accepted names, and collections found in different herbaria. Lectotypes for 19 names are designated, two new synonyms are proposed, as well as the new combination Ocotea estrellensis (Meisn.) P.L.R. Moraes, based on Oreodaphne estrellensis Meisn. © President and Fellows of Harvard College, 2012.

Economic regulation to supplement bidding for public works contracts

Includes bibliography

Inflation targeting works well in Latin America

Includes bibliography