998 resultados para Bio-optical status


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este texto tem por base uma reflexão sobre uma ideia original de Jared Diamond (1997) que procura explicar por que é que a história dos povos seguiu caminhos evolutivos distintos nos diferentes continentes. A sua abordagem da evolução humana é inovadora porque combina história e biologia para desenhar o quadro geral da história da humanidade. Os eurasiáticos, especialmente os povos europeus e os povos da Ásia oriental espalharam-se pelo globo e dominam actualmente o mundo em termos de riqueza e poder. Outros povos, como a maioria das populações africanas, sobreviveram e sacudiram o domínio europeu, mas continuam a ser os mais pobres do mundo. As populações indígenas da África subsariana, das Américas e da Austrália foram subjugadas e dizimadas pelo colonialismo europeu. Como se tornou o mundo assim? Jared Diamond (1997) propõe que as diferenças entre as sociedades humanas dos diferentes continentes parecem dever--se a diferenças ambientais entre continentes e não a diferenças biológicas entre os povos. Um aspecto importante das diferenças ambientais refere-se à disponibilidade de espécies vegetais e animais selvagens possíveis de domesticar e a facilidade com que essas espécies se difundiram sem ter que se adaptar a novas condições climatéricas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A partir de uma modificação do esquema teórico de Max Weber, aplicado ao estudo do fenômeno da estratificação social, procurou-se a base conceptual para a elaboração de um índice de status sócio-econômico familiar. Selecionados os indicadores ocupação, renda e educação, consagrados pela literatura sociológica, os pesos respectivos foram obtidos através de um critério estatístico (correlação de cada variável com o "score" total). Cada status familiar, representado por um "score" total, encontra-se referido a um estrato no sistema de estratificação considerado.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nutritional surveys (food consumption, clinical and biochemichal) were conducted in a small institution for homeless children. Results showed that only 30% of the children presented adequate calorie intake. Most of the children presented adequate protein intake, but almost half consumed less than 2/3 of the calcium RDA considered necessary. Food handling, processing, and distribution also proved inadequate and wastage, high. Skinfold measurement showed up one case of obesity. Furthermore, most of the children presented clinical signs of vitamin A deficiency, mostly skin lesions; while about half presented clinical signs of riboflavin deficiency. Biochemical data showed that 63.6% had deficient plasma levels of vitamin A, none showed abnormal results for riboflavin excretion, four showed packed blood cell volume below normal, and all had normal hemoglobin levels. Stool examinations revealed a high rate of pathogenic protozoa (Hymenolepis nana), in fact, one of the highest in Brazilian literature.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Urban regeneration is more and more a “universal issue” and a crucial factor in the new trends of urban planning. It is no longer only an area of study and research; it became part of new urban and housing policies. Urban regeneration involves complex decisions as a consequence of the multiple dimensions of the problems that include special technical requirements, safety concerns, socio-economic, environmental, aesthetic, and political impacts, among others. This multi-dimensional nature of urban regeneration projects and their large capital investments justify the development and use of state-of-the-art decision support methodologies to assist decision makers. This research focuses on the development of a multi-attribute approach for the evaluation of building conservation status in urban regeneration projects, thus supporting decision makers in their analysis of the problem and in the definition of strategies and priorities of intervention. The methods presented can be embedded into a Geographical Information System for visualization of results. A real-world case study was used to test the methodology, whose results are also presented.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

During the second half of 1986 the health and nutritional status of 254 children aged up to six years was studied, as well as the socio-economic situation of their parents in two favelas (shantytowns) in Belo Horizonte, Brazil. The nutritional status of the children was characterized by stunting (Z-score: 20.1% < -2) but not by wasting (Z-score: 3.7% < -2). Consideration was also given to how far stunting was caused by high morbidity such as acute respiratory infections (point prevalence: 38.5%), diarrheal diseases (point prevalence: 11.5%) and parasitosis (point prevalence: 70.3%). Furthermore, anemia (point prevalence: 29.7%) appeared as another health problem. The most important determinant of anthropometric indices turned out to be the mother's schooling. From the present data it can be hypothesized that the nutritional status of the children was limited less by the lack of food than by their poor health status.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Considering that in most developing countries there are still no comprehensive lists of addresses for a given geographical area, there has always been a problem in drawing samples from the community, ensuring randomisation in the selection of the subjects. This article discusses the geographical stratification by socio-economic status used to draw a multistage random sample from a community-based elderly population living in a city like S. Paulo - Brazil. Particular attention is given to the fact that the proportion of elderly people in the total population of a certain area appeared to be a good discriminatory variable for such stratification. The validity of the stratification method is analysed in the light of the socio-economic results obtained in the survey.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Novel alternating copolymers comprising biscalix[4]arene-p-phenylene ethynylene and m-phenylene ethynylene units (CALIX-m-PPE) were synthesized using the Sonogashira-Hagihara cross-coupling polymerization. Good isolated yields (60-80%) were achieved for the polymers that show M-n ranging from 1.4 x 10(4) to 5.1 x 10(4) gmol(-1) (gel permeation chromatography analysis), depending on specific polymerization conditions. The structural analysis of CALIX-m-PPE was performed by H-1, C-13, C-13-H-1 heteronuclear single quantum correlation (HSQC), C-13-H-1 heteronuclear multiple bond correlation (HMBC), correlation spectroscopy (COSY), and nuclear overhauser effect spectroscopy (NOESY) in addition to Fourier transform-Infrared spectroscopy and microanalysis allowing its full characterization. Depending on the reaction setup, variable amounts (16-45%) of diyne units were found in polymers although their photophysical properties are essentially the same. It is demonstrated that CALIX-m-PPE does not form ground-or excited-state interchain interactions owing to the highly crowded environment of the main-chain imparted by both calix[4]arene side units which behave as insulators inhibiting main-chain pi-pi staking. It was also found that the luminescent properties of CALIX-m-PPE are markedly different from those of an all-p-linked phenylene ethynylene copolymer (CALIX-p-PPE) previously reported. The unexpected appearance of a low-energy emission band at 426 nm, in addition to the locally excited-state emission (365 nm), together with a quite low fluorescence quantum yield (Phi = 0.02) and a double-exponential decay dynamics led to the formulation of an intramolecular exciplex as the new emissive species.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

To test the hypothesis that the low socioeconomic population living is shanty towns in Porto Alegre presents different levels of poverty which are reflected on its health status, a cross-sectional study was designed involving 477 families living in Vila Grande Cruzeiro, Porto Alegre, Brazil. The poverty level of the families was measured by using an instrument specifically designed for poor urban populations. Children from families living in extreme poverty (poorest quartile) were found to have higher infant mortality rate, lower birth weights, more hospitalizations, and higher malnutrition rates, in addition to belonging to more numerous families. Thus, the shanty town population of Porto Alegre is not homogeneous, and priority should be given to the more vulnerable subgroups.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O objectivo do presente trabalho foi desenvolver, implementar e validar métodos de determinação de teor de cálcio (Ca), magnésio (Mg), sódio (Na), potássio (K) e fósforo (P) em biodiesel, por ICP-OES. Este método permitiu efectuar o controlo de qualidade do biodiesel, com a vantagem de proporcionar uma análise multi-elementar, reflectindo-se numa diminuição do tempo de análise. Uma vez que o biodiesel é uma das principais fontes de energia renovável e alternativa ao diesel convencional, este tipo de análises revela-se extremamente útil para a sua caracterização. De acordo com a análise quantitativa e qualitativa e após a validação dos respectivos ensaios, apresentam-se, na Tabela 1 as condições optimizadas para cada elemento em estudo. As condições de trabalho do ICP-OES foram escolhidas tendo em conta as características do elemento em estudo, o tipo de equipamento utilizado para a sua análise, e de modo a obter a melhor razão sinal/intensidade de fundo. Para a validação dos ensaios foram efectuados ensaios de recuperação, determinados limites de detecção e quantificação, ensaios de repetibilidade e reprodutibilidade, e verificação das curvas de calibração. Na tabela 2 apresentam-se os comprimentos de onda escolhidos (livres de interferências) e respectivos limites de detecção e quantificação dos elementos analisados por ICP-OES, na posição radial e radial atenuado.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this paper we present results on the optimization of multilayered a-SiC:H heterostructures for wavelength-division (de) multiplexing applications. The non selective WDM device is a double heterostructure in a glass/ITO/a-SiC:H (p-i-n) /a-SiC:H(-p) /a-Si:H(-i')/a-SiC:H (-n')/ITO configuration. The single or the multiple modulated wavelength channels are passed through the device, and absorbed accordingly to its wavelength, giving rise to a time dependent wavelength electrical field modulation across it. The effect of single or multiple input signals is converted to an electrical signal to regain the information (wavelength, intensity and frequency) of the incoming photogenerated carriers. Here, the (de) multiplexing of the channels is accomplished electronically, not optically. This approach offers advantages in terms of cost since several channels share the same optical components; and the electrical components are typically less expensive than the optical ones. An electrical model gives insight into the device operation.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

OBJECTIVE: To compare HIV seronegative (HIV-) and HIV seropositive (HIV+) males in terms of sexual behavior with female and male partners of different types. METHOD: Cross-sectional study. From August 1994 to February 1995, a sample of 236 respondents (150 HIV- and 86 HIV+) recruited from public health centers in the State of S. Paulo (Brazil), answered a questionnaire, including questions on demographic aspects, HIV and AIDS related knowledge, sexual orientation, use of alcohol and other drugs, sexual behavior with regular and casual female and male partners, and perceived risk of HIV infection. Sexual behavior with regular and casual female and male partners within the previous three months, was investigated. RESULTS: A lower proportion of HIV+ engaged in sexual contact with regular female partners (p < .01) and in vaginal intercourse with this type of partner (p < .01). A lower proportion of HIV+ engaged in overall sexual activity (p < .001) and reported lower frequency of penetrative sexual practices (p < .05). A high level of condom use with female and male partners was identified with no significant differences being found between the two serostatus groups. Some risky sexual behavior was identified, however, especially with regular partners, suggesting that some men were continuing to practice unsafe sex. CONCLUSIONS: The high level of condom use identified suggests that safer sex advice has been taken up. Condom use was not universal, however, and some men continue to place themselves at risk, especially with regular partners. Prevention programs should strive not only to encourage HIV- to practice safer sex, but also to encourage HIV+ to do so in order to prevent further transmission of the virus.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A two terminal optically addressed image processing device based on two stacked sensing/switching p-i-n a-SiC:H diodes is presented. The charge packets are injected optically into the p-i-n sensing photodiode and confined at the illuminated regions changing locally the electrical field profile across the p-i-n switching diode. A red scanner is used for charge readout. The various design parameters and addressing architecture trade-offs are discussed. The influence on the transfer functions of an a-SiC:H sensing absorber optimized for red transmittance and blue collection or of a floating anode in between is analysed. Results show that the thin a-SiC:H sensing absorber confines the readout to the switching diode and filters the light allowing full colour detection at two appropriated voltages. When the floating anode is used the spectral response broadens, allowing B&W image recognition with improved light-to-dark sensitivity. A physical model supports the image and colour recognition process.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A visible/near-infrared optical sensor based on an ITO/SiOx/n-Si structure with internal gain is presented. This surface-barrier structure was fabricated by a low-temperature processing technique. The interface properties and carder transport were investigated from dark current-voltage and capacitance-voltage characteristics. Examination of the multiplication properties was performed under different light excitation and reverse bias conditions. The spectral and pulse response characteristics are analysed. The current amplification mechanism is interpreted by the control of electron current by the space charge of photogenerated holes near the SiOx/Si interface. The optical sensor output characteristics and some possible device applications are presented.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Large area n-i-p-n-i-p a-SiC:H heterostructures are used as sensing element in a double colour laser scanned photodiode image sensor (D/CLSP). This work aims to clarify possible improvements, physical limits and performance of CLSP image sensor when used as non-pixel image reader. Here, the image capture device and the scanning reader are optimized and the effects of the sensor structure on the output characteristics discussed. The role of the design of the sensing element, the doped layer composition and thickness, the read-out parameters (applied voltage and scanner frequency) on the image acquisition and the colour detection process are analysed. A physical model is presented and supported by a numerical simulation of the output characteristics of the sensor.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Large area n-i-p-n-i-p a-SiC:H heterostructures are used as sensing element in a Double Color Laser Scanned Photodiode image sensor (D/CLSP). This work aims to clarify possible improvements, physical limits and performance of CLSP image sensor when used as non-pixel image reader. Here, the image capture device and the scanning reader are optimized and the effects of the sensor structure on the output characteristics discussed. The role of the design of the sensing element, the doped layer composition and thickness, the read-out parameters (applied voltage and scanner frequency) on the image acquisition and the color detection process are analyzed. A physical model is presented and supported by a numerical simulation of the output characteristics of the sensor.