Improvements of plasma immersion ion implantation (PIII) and deposition (PIII&D) processing for materials surface modification

Plasma immersion ion implantation (PIII) process is a three dimensional surface modification method that is quite mature and well known to the surface engineering community nowadays, especially to those working in the field of plasma-materials interaction, aiming at both industrial and academic applications. More recently, deposition methods have been added to PIII, the PIII&D, opening possibilities of broader range of applications of these techniques. So, PIII&D is becoming a routine method of surface modification, with the advantage of pushing up the retained dose levels limited by the sputtering due to ion implantation. Therefore, well adherent, thick, three-dimensional films without stress are possible to be achieved, at relatively low cost, using PIII&D. In this paper, we will discuss about a few PIII and PIII&D experiments that have been performed recently to achieve surface improvements in different materials: 1 - high temperature nitrogen PIII in Ti6Al4V alloy in which a deep nitrogen rich treated layer resulted in surface improvements as increase of hardness, corrosion resistance and resistance to wear of the Ti alloy; 2 - nanostructures in ZnO films, obtained by PIII&D of vaporized & ionized Zn source; 3 - combined implantation and deposition of calcium for biomaterial activity of Ti alloy (PIII&D), allowing the growth of hydroxyapatite in a body solution; 4 - magnetron sputtering deposition of Cr that was enhanced by the glow discharge Ar plasma to allow implantation and deposition of Cr on SAE 1070 steel (PIII&D) resulting in surfaces with high resistance to corrosion; and 5 - implantation of nitrogen by ordinary PIII into this Cr film, which improved resistance to corrosion, while keeping the tribological properties as good as for the SAE 1070 steel surface. © 2012 Elsevier B.V.

ZnO nanostructures directly grown on paper and bacterial cellulose substrates without any surface modification layer

In this report, hierarchical ZnO nano- and microstructures were directly grown for the first time on a bacterial cellulose substrate and on two additional different papers by hydrothermal synthesis without any surface modification layer. Compactness and smoothness of the substrates are two important parameters that allow the growth of oriented structures. © 2013 The Royal Society of Chemistry.

Antinociceptive and Behavioral Effects of Methadone Alone or in Combination with Detomidine in Conscious Horses

The antinociceptive and behavioral effects of methadone (MET) alone or combined with detomidine (DET) were studied in horses. Intravenous treatments were randomly administered in a two-phase crossover study. In phase 1, six horses were treated with saline (control) or 0.2 or 0.5 mg/kg methadone (MET0.2; MET0.5, respectively). In phase 2, six horses were treated with 0.01 mg/kg DET alone or with DET combined with 0.2 mg/kg MET (DET/MET0.2). Thermal nociceptive threshold (TNT) and electrical nociceptive thresholds (ENT) were recorded by using a heat projection lamp and electrodes placed in the coronary band of the thoracic limbs, respectively. Spontaneous locomotor activity (SLA) was studied by movement sensors in the stall (phase 1). Chin-to-floor distance was assessed in phase 2. In phase 1, the TNT increased significantly for 30 minute after MET0.5 but not after saline or MET0.2. Hyperesthesia and ataxia were observed in 2 of 6 and 6 of 6 horses after MET0.2 and MET0.5, respectively. SLA increased significantly for 120 minutes after MET in a dose-dependent way, but not after placebo. In phase 2, DET and DET/MET0.2 significantly increased the TNT and ENT above baseline for 15 and 30 minutes, respectively; thresholds were significantly higher with DET/MET0.2 than with DET at the same times. Chin-to-floor distance decreased significantly from baseline for 30 minutes, and no excitatory behavior was observed in both treatments. Although the higher dose of MET induced short-acting antinociception, the associated adverse effects may contraindicate its clinical use. The lower dose of MET potentiated DET-induced antinociception without adverse effects, which might be useful under clinical circumstances. © 2013 Elsevier Inc. All rights reserved.

Equine Perineal and Vulvar Conformation Correction Using a Modification of Pouret's Technique

An incompetent vulvar seal leads to reproductive failure, and a surgical intervention might be required. The present paper describes modifications to Pouret's surgery. We suggest the use of a simple interrupted vertical mattress suture, which avoids seroma. Eighteen Brazilian Jumping Horse mares, older than 20 years and barren for 3-5 consecutive years, underwent modified Pouret's surgery. A horizontal skin incision of 3-4 cm was made half way between the anus and upper commissure of the vulva. The submucosal and connective tissue were dissected, and the rectovaginal shelf was split horizontally by sectioning the muscular and ligamentous connections between the anus, vulva, caudal portion of the rectum, and vagina until the vulva was oriented vertically. The wound was changed from a horizontal plane to a vertical plane by placing the suture vertically using approximately eight interrupted U sutures distributed in two layers with polyamide thread. The modified Pouret's surgical technique provided a perfect coaptation of the vulvar lips and a correct perineal position. Those mares that presented with horizontally tipped vulvar lips due to advanced age and stretching of the pelvic tissues by multiple foaling had their vulvas replaced. Also, the surgical procedure was easy to perform. As to fertility, of the 18 initial mares, 14 were inseminated, and all became pregnant. Thus, it was possible to conclude that the anatomical changes performed throughout the surgical procedure predisposed to a better vulvar coaptation, correcting the pneumovagina. © 2013 Elsevier Inc. All rights reserved.

Interlacing of zeros of orthogonal polynomials under modification of the measure

We investigate the mutual location of the zeros of two families of orthogonal polynomials. One of the families is orthogonal with respect to the measure dμ (x), supported on the interval (a, b) and the other with respect to the measure |x -c|τ|x -d|γdμ (x), where c and d are outside (a, b) We prove that the zeros of these polynomials, if they are of equal or consecutive degrees, interlace when either 0 < τ, γ ≤ 1 or γ = 0 and 0 < τ ≤ 2. This result is inspired by an open question of Richard Askey and it generalizes recent results on some families of orthogonal polynomials. Moreover, we obtain further statements on interlacing of zeros of specific orthogonal polynomials, such as the Askey-Wilson ones. © 2013 Elsevier Inc.

Eficácia do Programa de Treinamento Auditivo em escolares com distúrbio de aprendizagem

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

PCN no contexto da análise comportamental da cultura: descrições e prescrições sugeridas no tema transversal de meio ambiente

Pós-graduação em Psicologia do Desenvolvimento e Aprendizagem - FC

Fatores associados à hipertensão arterial de adultos triados para programa de mudança de estilo de vida

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cognição animal: identidade generalizada e simetria em macaco-prego (Cebus apella)

Repertórios comportamentais complexos, tais como identidade generalizada e classes de equivalência, têm sido encontrados com relativa facilidade em sujeitos humanos ditos normais, assim como em crianças e adolescentes com déficit de aprendizagem, porém, com extrema dificuldade em sujeitos não-humanos. Uma das propriedades definidoras de equivalência mais difíceis de obter com não humanos é a simetria, provavelmente por envolver, além das reversões das funções de modelo e comparação dos estímulos, também mudanças na seqüência e na posição de apresentação dos estímulos. O insucesso na obtenção de identidade generalizada e formação de classes de equivalência em sujeitos não-humanos pode estar ligado à incoerência entre a Topografia de Controle de Estímulos planejada pelo experimentador e a desenvolvida pelos sujeitos, sugerindo a necessidade de desenvolvimento metodológico mais específico. O presente estudo buscou aplicar procedimentos experimentais de treino e teste para a obtenção de identidade generalizada e verificar a possibilidade de emergência de simetria após treino de pareamento arbitrário ao modelo, via procedimento de modelagem do estímulo modelo e na ausência de correlação entre as funções modelo e comparação dos estímulos e suas posições. Foi utilizado um macaco-prego (Cebus apella) sub-adulto, experimentalmente ingênuo. Foram realizados dois experimentos. No Experimento I, foram efetuados treinos de reversões de discriminações simples, treinos de relações condicionais em um procedimento de pareamento ao modelo por identidade e teste de identidade generalizada em extinção. Os resultados indicam que o procedimento foi eficiente para o treino de discriminações simples e reversões, assim como para a aquisição de relações condicionais de escolha por identidade ao modelo. O procedimento foi eficaz na seleção do comportamento de escolha de acordo com o modelo por identidade generalizada, uma vez que todos os resultados dos testes de identidade generalizada foram positivos. No Experimento II, foram efetuados treinos de pareamento ao modelo arbitrário AB, utilizando procedimento de modelagem do estímulo modelo em 8 passos, e um teste de simetria BA. Este experimento visou verificar se os elementos positivamente relacionados em discriminações condicionais (num treino AB, por exemplo) poderiam ser recombinados pelo sujeito sem treino adicional. A performance do sujeito no teste de simetria BA atingiu a precisão de 100% de acertos, mostrando que é possível obter, com sujeitos não humanos, a propriedade de simetria em relações condicionais arbitrárias. Os dados justificam que novos estudos sejam realizados a fim de contribuir para a especificação das condições necessárias para a obtenção de repertório complexo como a formação de classes de equivalência em sujeitos não humanos.

Construct validity of behavioral models of anxiety: where experimental psychopathology meets ecology and evolution

In experimental psychopathology, construct validity is usually enhanced by addressing theories from other fields in its nomological network. In the field of anxiety research, this construct is related to antipredator behavior, conserved across phylogeny in its functions and neural basis, but not necessarily on its topography. Even though the relations between behavioral models of anxiety and statements from behavioral ecology and evolutionary biology are commonly made in anxiety research, these are rarely tested, at least explicitly. However, in order to increase construct validity in experimental anxiety, testing predictions from those theories is highly desirable. This article discusses these questions, suggesting a few ways in which behavioral ecological and evolutionary hypotheses of anxiety-like behavior may be tested.

Chemical modification of the surface of alumina with alkaline earth metal oxides using the polymeric precursor method for catalysis application

In this study, modifications of alumina surface with of alkaline earth metal oxides were studied, using the polymeric precursor method. The modified compounds were characterized by X-ray diffraction, nitrogen adsorption-desorption and scanning electron microscopy. The catalytical properties of these new catalysts were evaluated for the transesterification reaction of babassu oil. It is observed that the transesterification reaction of babassu oil with methanol was successfully carried out using the modified alumina samples.

Effect of thermal modification on the physical properties of juvenile and mature woods of Eucalyptus grandis

This study aimed to evaluate the effect of thermal treatment on the physical properties of juvenile and mature woods of Eucalyptus grandis. Boards were taken from 30-year-old E. grandis trees. The boards were thermally modified at 180 °C in the Laboratory of Wood Drying and Preservation at UNESP, Botucatu, Sao Paulo state, Brazil. The results showed that thermal modification caused: (1) decrease of 6.8% in the density at 0% equilibrium moisture content of mature wood; (2) significant decreases of 14.7% and 35.6% in the maximum volumetric swellings of juvenile and mature woods, respectively; (3) significant decreases of 13.7% and 21.3% in the equilibrium moisture content of juvenile and mature woods, respectively. The influence of thermal modification in juvenile wood was lower than in mature wood and caused greater uniformity in the physical variations between these types of wood in E. grandis.

Modification of jet shapes in PbPb collisions at root s(NN)=2.76 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Therapeutic interventions to reduce the risk of progression from prediabetes to type 2 diabetes mellitus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)