Surface instability of confined elastic bilayers: Theory and simulations

The surface of a soft elastic film becomes unstable and forms a self-organized undulating pattern because of adhesive interactions when it comes in contact proximity with a rigid surface. For a single film, the pattern length scale lambda, which is governed by the minimization of the elastic stored energy, gives lambda similar to 3h, where h is the film thickness. Based on a linear stability analysis and simulations of adhesion and debonding, we consider the contact instability of an elastic bilayer, which provides greater flexibility in the morphological control of interfacial instability. Unlike the case of a single film, the morphology of the contact instability patterns, debonding distance, and debonding force in a bilayer can be controlled in a nonlinear way by varying the thicknesses and shear moduli of the films. Interestingly, the pattern wavelength in a bilayer can be greatly increased or decreased compared to a single film when the adhesive contact is formed by the stiffer or the softer of the two films, respectively. In particular, lambda as small as 0.5h can be obtained. This indicates a new strategy for pattern miniaturization in elastic contact lithography.

Theory of laminar flame propagation with non-normal diffusion.

A study has been made of the problem of steady, one-dimensional, laminar flame propagation in premixed gases, with the Lewis number differing from (and equal to) unity. Analytical solutions, using the method of matched asymptotic expansions, have been obtained for large activation energies. Numerical solutions have been obtained for a wide range of the reduced activation temperature parameter (n {geometrically equal to} E/RTb), and the Lewis number δ. The studies reveal that the flame speed eigenvalue is linear in Lewis number for first order and quadratic in Lewis number for second order reactions. For a quick determination of flame speeds, with reasonable accuracy, a simple rule, expressing the flame speed eigenvalue as a function of the Lewis number and the centroid of the reaction rate function, is proposed. Comparisons have been made with some of the earlier works, for both first and second order reactions.

Interculturality in Theory and Practice in the Master's Programme of Intercultural Bilingual Education in Bolivia

Tämän tutkielman aiheena on kulttuurienvälisyys kulttuurienvälisessä kaksikielisessä opetuksessa (Educación Intercultural Bilingüe, EIB) Boliviassa ja erityisesti kulttuurienvälisen kaksikielisen koulutuksen maisteriohjelmassa (Maestría en Educación Intercultural Bilingüe), jota koordinoi PROEIB Andes -järjestö yhteistyössä Cochabamban Universidad Mayor de San Simónin kanssa. Tutkielman tarkoituksena on selvittää, miten kulttuurienvälisyys määritellään ja mitä se käytännössä merkitsee opetuksen eri osa-alueilla: sisällöissä, opetusmetodeissa ja -materiaaleissa sekä arvioinnissa. Koska kulttuurienvälisen kaksikielisen opetuksen toteutus ja tutkiminen eri Latinalaisen Amerikan maissa on tähän asti painottunut lähes yksinomaan perusopetukseen, pyrin työssäni keskittymään kulttuurienvälisyyden ilmentymiin nimenomaan bolivialaisessa korkeakoulukontekstissa. Tutkielman aineistona on käytetty kahdeksaa EIB -asiantuntijoiden teemahaastattelua, jotka FM Eila Isotalus on tehnyt Boliviassa vuonna 2004. Haastatteluaineisto analysoitiin teoriasidonnaista eli abduktiivista sisällönanalyysiä käyttäen. Tutkielman teoriatausta koostuu yhtäältä kulttuurienvälisyyteen ja monikulttuurisuuteen liittyvien käsitteiden määrittelystä, ja toisaalta kulttuurienväliseen opetukseen liittyvien mallien esittelystä. Aineiston analyysissä avuksi on ollut etenkin James A. Banksin teoria monikulttuurisen opetuksen viidestä ulottuvuudesta, joiden kautta on voitu pohtia kulttuurienvälisyyden toteutumista opetuksen eri osa-alueilla ja nostaa esille bolivialaisen kulttuurienvälisen opetuksen erityispiirteitä. Aineiston analyysissä ilmenee, että kulttuurienvälisyyden käsitteen määrittely on vahvasti kontekstisidonnainen ja jatkuva prosessi, johon vaikuttavat eri toimijoiden näkemykset ja vaatimukset. EIB -asiantuntijoiden esittämät määrittelyt voidaan jakaa makro- ja mikrososiaaliseen kategoriaan sen mukaan, nähdäänkö kulttuurienvälisyys ensisijaisesti yhteiskunnallisena vai yksilötason käsitteenä. Aineistossa korostuu ajatus latinalaisamerikkalaisesta kulttuurienvälisyydestä poliittisena käsitteenä, jonka keskiössä on vaatimus yhteiskunnallisten valtasuhteiden muutoksesta. Yksi suurimmista haasteista kulttuurienvälisyyden toteuttamisessa bolivialaisessa korkeakouluopetuksessa ovat akateemiseen kulttuuriin liittyvät perinteet, jotka vaikeuttavat uusien toimintatapojen omaksumista. Kulttuurienvälisyys opetuksessa on toistaiseksi tarkoittanut etupäässä sisältöjen monipuolistamista lisäämällä opetusohjelmiin elementtejä paikallisista kulttuureista. Tärkeänä askeleena EIB:n kehityksessä voidaan pitää painopisteen siirtymistä sisältökysymyksistä kulttuurienvälisten opetusmetodien luomiseen. Näiden opetusmenetelmien tulisi pohjautua ymmärrykseen oppimisesta kokonaisvaltaisena, yhteisöllisenä prosessina ja siten kuroa umpeen kuilua koulun ja yhteisöjen arkielämän välillä. Opetusmenetelmien ja -materiaalien suhteen keskeinen kulttuurienvälisyyteen liittyvä kysymys on intiaanikansojen suullisen kulttuurin ja tiedon jakamisen perinteiden hyödyntäminen opetuksessa. Maisteriohjelman opiskelijoiden arvioinnissa pyritään huomioimaan yksilön kokonaisvaltainen kehitys pelkkien opintosuoritusten sijasta, mutta arvosanoihin pohjautuvasta arvostelukäytännöstä ei ole toistaiseksi voitu luopua yliopiston vaatimusten vuoksi. Kaiken kaikkiaan kulttuurienvälisyyden toteuttaminen EIB:ssä ja maisteriohjelmassa on pitkän tähtäimen prosessi, joka vaatii perinteisten opetuskäytäntöjen kyseenalaistamista ja korkeakouluopetuksessa myös akateemisen kulttuurin haastamista. On oleellisen tärkeää, että prosessiin osallistuvat asiantuntijoiden ohella myös esimerkiksi opiskelijat, intiaaniyhteisöt ja -järjestöaktiivit.

A generalized mathematical theory and experimental verification of proportional notches

A theory and generalized synthesis procedure is advocated for the design of weir notches and orifice-notches having a base in any given shape, to a depth a, such that the discharge through it is proportional to any singular monotonically-increasing function of the depth of flow measured above a certain datum. The problem is reduced to finding an exact solution of a Volterra integral equation in Abel form. The maximization of the depth of the datum below the crest of the notch is investigated. Proof is given that for a weir notch made out of one continuous curve, and for a flow proportional to the mth power of the head, it is impossible to bring the datum lower than (2m − 1)a below the crest of the notch. A new concept of an orifice-notch, having discontinuity in the curve and a division of flow into two distinct portions, is presented. The division of flow is shown to have a beneficial effect in reducing the datum below (2m − 1)a from the crest of the weir and still maintaining the proportionality of the flow. Experimental proof with one such orifice-notch is found to have a constant coefficient of discharge of 0.625. The importance of this analysis in the design of grit chambers is emphasized.

Moment methods and "restricted variation" in kinetic theory

It is shown that there is a strict one-to-one correspondence between results obtained by the use of "restricted" variational principles and those obtained by a moment method of the Mott-Smith type for shock structure.

Climate change and agriculture: theory and application of mitigation policies

Agriculture’s contribution to climate change is controversial as it is a significant source of greenhouse gases but also a sink of carbon. Hence its economic and technological potential to mitigate climate change have been argued to be noteworthy. However, social profitability of emission mitigation is a result from factors among emission reductions such as surface water quality impact or profit from production. Consequently, to value comprehensive results of agricultural climate emission mitigation practices, these co-effects to environment and economics should be taken into account. The objective of this thesis was to develop an integrated economic and ecological model to analyse the social welfare of crop cultivation in Finland on distinctive cultivation technologies, conventional tillage and conservation tillage (no-till). Further, we ask whether it would be privately or socially profitable to allocate some of barley cultivation for alternative land use, such as green set-aside or afforestation, when production costs, GHG’s and water quality impacts are taken into account. In the theoretical framework we depict the optimal input use and land allocation choices in terms of environmental impacts and profit from production and derive the optimal tax and payment policies for climate and water quality friendly land allocation. The empirical application of the model uses Finnish data about production cost and profit structure and environmental impacts. According to our results, given emission mitigation practices are not self-evidently beneficial for farmers or society. On the contrary, in some cases alternative land allocation could even reduce social welfare, profiting conventional crop cultivation. This is the case regarding mineral soils such as clay and silt soils. On organic agricultural soils, climate mitigation practices, in this case afforestation and green fallow give more promising results, decreasing climate emissions and nutrient runoff to water systems. No-till technology does not seem to profit climate mitigation although it does decrease other environmental impacts. Nevertheless, the data behind climate emission mitigation practices impact to production and climate is limited and partly contradictory. More specific experiment studies on interaction of emission mitigation practices and environment would be needed. Further study would be important. Particularly area specific production and environmental factors and also food security and safety and socio-economic impacts should be taken into account.

Bending, vibration and buckling of simply supported thick orthotropic rectangular plates and laminates

This paper presents a unified exact analysis for the statics and dynamics of a class of thick laminates. A three-dimensional, linear, small deformation theory of elasticity solution is developed for the bending, vibration and buckling of simply supported thick orthotropic rectangular plates and laminates. All the nine elastic constants of orthotropy are taken into account. The solution is formally exact and leads to simple infinite series for stresses and displacements in flexure, forced vibration and "beam-column" type problems and to closed form characteristic equations for free vibration and buckling problems. For free vibration of plates, the present analysis yields a triply infinite spectrum of frequencies instead of only one doubly infinite spectrum by thin plate theory or three doubly infinite spectra by Reissner-Mindlin type analyses. Some numerical results are presented for plates and laminates. Comparison of results from thin plate, Reissner and Mindlin analyses with these yield some important conclusions regarding the validity and effects of the assumptions made in the approximate theories.

Lattice density-functional theory on graphene

A density-functional approach on the hexagonal graphene lattice is developed using an exact numerical solution to the Hubbard model as the reference system. Both nearest-neighbour and up to third nearest-neighbour hoppings are considered and exchange-correlation potentials within the local density approximation are parameterized for both variants. The method is used to calculate the ground-state energy and density of graphene flakes and infinite graphene sheet. The results are found to agree with exact diagonalization for small systems, also if local impurities are present. In addition, correct ground-state spin is found in the case of large triangular and bowtie flakes out of the scope of exact diagonalization methods.

On the theory of the indentation test for the measurement of tensile strength of brittle materials

A theoretical solution has been obtained for the state of stress in a rectangular plate under a pair of symmetrically placed rigid indenters. The stress distributions along the two central axes have been calculated for a square plate assuming the pressure distribution under the indenters as uniform, parabolic and one resulting from 'constant displacement' on a semiinfinite boundary, for different ratios of indenter-width to side of square. The results are compared with those of photoelastic analysis of Berenbaum and Brodie and the validity of the solution is discussed. The solution has been extended to orthotropic materials and numerical results for one type of coal are given.

A nonlinear theory of wake development

A simple new series, using an expansion of the velocity profile in parabolic cylinder functions, has been developed to describe the nonlinear evolution of a steady, laminar, incompressible wake from a given arbitrary initial profile. The first term in this series is itself found to provide a very satisfactory prediction of the decay of the maximum velocity defect in the wake behind a flat plate or aft of the recirculation zone behind a symmetric blunt body. A detailed analysis, including higher order terms, has been made of the flat plate wake with a Blasius profile at the trailing edge. The same method yields, as a special case, complete results for the development of linearized wakes with arbitrary initial profile under the influence of arbitrary pressure gradients. Finally, for purposes of comparison, a simple approximate solution is obtained using momentum integral methods, and found to predict satisfactorily the decay of the maximum velocity defect. © 1970 Wolters-Noordhoff Publishing.

Simplified theory of carrier back-scattering in semiconducting carbon nanotubes: A Kane's model approach

We present a simplified yet analytical formulation of the carrier backscattering coefficient for zig-zag semiconducting single walled carbon nanotubes under diffusive regime. The electron-phonon scattering rate for longitudinal acoustic, optical, and zone-boundary phonon emissions for both inter- and intrasubband transition rates have been derived using Kane's nonparabolic energy subband model.The expressions for the mean free path and diffusive resistance have been formulated incorporating the aforementioned phonon scattering. Appropriate overlap function in Fermi's golden rule has been incorporated for a more general approach. The effect of energy subbands on low and high bias zones for the onset of longitudinal acoustic, optical, and zone-boundary phonon emissions and absorption have been analytically addressed. 90% transmission of the carriers from the source to the drain at 400 K for a 5 mu m long nanotube at 105 V m(-1) has been exhibited. The analytical results are in good agreement with the available experimental data. (c) 2010 American Institute of Physics.

Convergence correction in colloid scattering

The error introduced in depolarisation measurements due to the convergence of the incident beam has been investigated theoretically as well as experimentally for the case of colloid scattering, where the particles are not small compared to the wavelength of light. Assuming the scattering particles to be anisotropic rods, it is shown that, when the incident unpolarised light is condensed by means of a lens with a circular aperture, the observed depolarisation ratio ϱ u is given by ϱ u = ϱ u0 + 5/3 θ2 where ϱ u0 is the true depolarisation for incident parallel light, and θ the semi-angle of convergence. Appropriate formulae are derived when the incident beam is polarised vertically and horizontally. Experiments performed on six typical colloids support the theoretical conclusions. Other immediate consequences of the theory are also discussed.