An austerity-driven energy reform

In July 2013, the government approved a major overhaul of the Spanish electricity sector to correct existing imbalances that have led to an exponential increase of regulated electricity costs and a huge tariff deficit. The reform addresses the problem of financial sustainability of the sector, severely affected by weak demand and overcapacity. Previous regulation introduced in 2012 and early 2013, also aimed at restoring financial stability of the sector, failed to correct the tariff shortfall and new regulatory measures were needed to reduce the 4.5 billion euros forecasted deficit for 2013. The frequent change of the rules of the game in the sector has created regulatory uncertainty, more so as it is not clear that the present reform will be sufficient to eliminate the deficit. Moreover, the government has left the door open to new regulation that would deal with the price formation system. In general, short run financial criteria have prevailed, while efficiency principles and a long run perspective have little weight in the reform.

Cost effectiveness of a combination of instruments for global warming: a quantitative approach for Spain

Climate change is an important environmental problem and one whose economic implications are many and varied. This paper starts with the presumption that mitigation of greenhouse gases is a necessary policy that has to be designed in a cost effective way. It is well known that market instruments are the best option for cost effectiveness. But the discussion regarding which of the various market instruments should be used, how they may interact and what combinations of policies should be implemented is still open and very lively. In this paper we propose a combination of instruments: the marketable emission permits already in place in Europe for major economic sectors and a CO(2) tax for economic sectors not included in the emissions permit scheme. The study uses an applied general equilibrium model for the Spanish economy to compute the results obtained with the new mix of instruments proposed. As the combination of the market for emission permits and the CO(2) tax admits different possibilities that depend on how the mitigation is distributed among the economic sectors, we concentrate on four possibilities: cost-effective, equalitarian, proportional to emissions, and proportional to output distributions. Other alternatives to the CO(2) tax are also analysed (tax on energy, on oil and on electricity). Our findings suggest that careful, well designed policies are needed as any deviation imposes significant additional costs that increase more than proportionally to the level of emissions reduction targeted by the EU.

Towards complex system design and management in the engineering domain – the smart grid challenge

This is an Author's Accepted Manuscript of an article published in “Emergence: Complexity and Organization”, 15 (2), pp. 14-22 (2013), copyright Taylor & Francis.

Agent based modeling of energy networks

Attempts to model any present or future power grid face a huge challenge because a power grid is a complex system, with feedback and multi-agent behaviors, integrated by generation, distribution, storage and consumption systems, using various control and automation computing systems to manage electricity flows. Our approach to modeling is to build upon an established model of the low voltage electricity network which is tested and proven, by extending it to a generalized energy model. But, in order to address the crucial issues of energy efficiency, additional processes like energy conversion and storage, and further energy carriers, such as gas, heat, etc., besides the traditional electrical one, must be considered. Therefore a more powerful model, provided with enhanced nodes or conversion points, able to deal with multidimensional flows, is being required. This article addresses the issue of modeling a local multi-carrier energy network. This problem can be considered as an extension of modeling a low voltage distribution network located at some urban or rural geographic area. But instead of using an external power flow analysis package to do the power flow calculations, as used in electric networks, in this work we integrate a multiagent algorithm to perform the task, in a concurrent way to the other simulation tasks, and not only for the electric fluid but also for a number of additional energy carriers. As the model is mainly focused in system operation, generation and load models are not developed.

Wire array photovoltaics

Over the past five years, the cost of solar panels has dropped drastically and, in concert, the number of installed modules has risen exponentially. However, solar electricity is still more than twice as expensive as electricity from a natural gas plant. Fortunately, wire array solar cells have emerged as a promising technology for further lowering the cost of solar.

Si wire array solar cells are formed with a unique, low cost growth method and use 100 times less material than conventional Si cells. The wires can be embedded in a transparent, flexible polymer to create a free-standing array that can be rolled up for easy installation in a variety of form factors. Furthermore, by incorporating multijunctions into the wire morphology, higher efficiencies can be achieved while taking advantage of the unique defect relaxation pathways afforded by the 3D wire geometry.

The work in this thesis shepherded Si wires from undoped arrays to flexible, functional large area devices and laid the groundwork for multijunction wire array cells. Fabrication techniques were developed to turn intrinsic Si wires into full p-n junctions and the wires were passivated with a-Si:H and a-SiNx:H. Single wire devices yielded open circuit voltages of 600 mV and efficiencies of 9%. The arrays were then embedded in a polymer and contacted with a transparent, flexible, Ni nanoparticle and Ag nanowire top contact. The contact connected >99% of the wires in parallel and yielded flexible, substrate free solar cells featuring hundreds of thousands of wires.

Building on the success of the Si wire arrays, GaP was epitaxially grown on the material to create heterostructures for photoelectrochemistry. These cells were limited by low absorption in the GaP due to its indirect bandgap, and poor current collection due to a diffusion length of only 80 nm. However, GaAsP on SiGe offers a superior combination of materials, and wire architectures based on these semiconductors were investigated for multijunction arrays. These devices offer potential efficiencies of 34%, as demonstrated through an analytical model and optoelectronic simulations. SiGe and Ge wires were fabricated via chemical-vapor deposition and reactive ion etching. GaAs was then grown on these substrates at the National Renewable Energy Lab and yielded ns lifetime components, as required for achieving high efficiency devices.

Algorithmic challenges in green data centers

With data centers being the supporting infrastructure for a wide range of IT services, their efficiency has become a big concern to operators, as well as to society, for both economic and environmental reasons. The goal of this thesis is to design energy-efficient algorithms that reduce energy cost while minimizing compromise to service. We focus on the algorithmic challenges at different levels of energy optimization across the data center stack. The algorithmic challenge at the device level is to improve the energy efficiency of a single computational device via techniques such as job scheduling and speed scaling. We analyze the common speed scaling algorithms in both the worst-case model and stochastic model to answer some fundamental issues in the design of speed scaling algorithms. The algorithmic challenge at the local data center level is to dynamically allocate resources (e.g., servers) and to dispatch the workload in a data center. We develop an online algorithm to make a data center more power-proportional by dynamically adapting the number of active servers. The algorithmic challenge at the global data center level is to dispatch the workload across multiple data centers, considering the geographical diversity of electricity price, availability of renewable energy, and network propagation delay. We propose algorithms to jointly optimize routing and provisioning in an online manner. Motivated by the above online decision problems, we move on to study a general class of online problem named "smoothed online convex optimization", which seeks to minimize the sum of a sequence of convex functions when "smooth" solutions are preferred. This model allows us to bridge different research communities and help us get a more fundamental understanding of general online decision problems.

Occupational practices and problems of rural artisanal fisherfolks in Oyan Dam area of Ogun State

Artisanal Fish Societies constitutes one of the poorest societies in the developing world. Attempts to harness the potentials of the societies have often failed due to the enormity of the problem of poverty. This study was conducted in four major fishing villages namely; Abule titun, Apojola, Imama Odo and Ibaro in order to investigate the occupational practices and the problems of rural artisanal fisherfolks in Oyam's Dam, area of Ogun State. Eighty respondents were randomly selected among the artisanal fisher folks for interview using interview guide. The findings revealed that 43.8% of the fisherfolks are within active range of 31-40 years while 30% are within 21-30 years range. Also 31% had no formal education indicating a relatively high level of illiteracy among the fisherfolks while majority of the respondents practice fishing activities using paddle and canoe. It was similarly discovered from the study that the most pressing problems of the fisherfolks is the lack of basic social amenities like electricity, potable water, access roads, hospitals and markets. It is therefore recommended that basic social infrastructures be provided for the artisanal fishing communities in order to improve their social welfare, standard of living and the capacity to have a sustainable fishing occupation in the interest of food security and poverty alleviation

Occupational practice and problems of artisanal fisherfolk in Oyan dam area of Ogun State

Artisanal Fish Societies constitutes one of the poorest societies in the developing world. Attempts to harness the potentials of such societies have often failed due to the enormity of the problem of poverty. This study was conducted in four major fishing villages namely: Abule Titun, Apojola, Imala Odo and Ibaro in order to investigate the occupational practices and the problems of rural artisanal fisherfolks in Oyam's Dam, area of Ogun State. Eighty respondents were randomly selected among the artisanal fisher folks for interview using interview guide. The findings revealed that 43.8% of the fisherfolks are within active age range of 31-40 years while 30% are within 21-30 years range. Also 31% had no formal education indicating a relatively high level of illiteracy among the fisherfolks while majority of the respondents practice fishing activities using paddle and canoe. It was similarly discovered from the study that the most pressing problems of the fishfolks is the lack of basic social amenities like electricity, potable water, access roads, hospital and markets. It is therefore recommended that basic social infrastructures be provided for the artisanal fishing communities in order to improve their social welfare, standard of living and the capacity to have a sustainable fishing occupation in the interest of food security and poverty alleviation

Where Tori fear to tread : hypermassive neutron star remnants and absolute event horizons Or topics in computational general relativity

Computational general relativity is a field of study which has reached maturity only within the last decade. This thesis details several studies that elucidate phenomena related to the coalescence of compact object binaries. Chapters 2 and 3 recounts work towards developing new analytical tools for visualizing and reasoning about dynamics in strongly curved spacetimes. In both studies, the results employ analogies with the classical theory of electricity and magnitism, first (Ch. 2) in the post-Newtonian approximation to general relativity and then (Ch. 3) in full general relativity though in the absence of matter sources. In Chapter 4, we examine the topological structure of absolute event horizons during binary black hole merger simulations conducted with the SpEC code. Chapter 6 reports on the progress of the SpEC code in simulating the coalescence of neutron star-neutron star binaries, while Chapter 7 tests the effects of various numerical gauge conditions on the robustness of black hole formation from stellar collapse in SpEC. In Chapter 5, we examine the nature of pseudospectral expansions of non-smooth functions motivated by the need to simulate the stellar surface in Chapters 6 and 7. In Chapter 8, we study how thermal effects in the nuclear equation of state effect the equilibria and stability of hypermassive neutron stars. Chapter 9 presents supplements to the work in Chapter 8, including an examination of the stability question raised in Chapter 8 in greater mathematical detail.

Design support for turbomachinery

From the steam turbines which provide most of our electricity to the jet engines which have shrunk our World, turbomachines undoubtedly play a major role in life today. Competition in the turbomachinery industry is fiercely strong [Wisler, 1998], hence good aerodynamic design is vital. However, with efficiency levels already close to their theoretical maxima, companies are increasingly looking to reduce costs and increase reliability through improved design practice. Computational Fluid Dynamics (CFD) can make a strong contribution to assisting this process as it has the potential to increase performance while reducing cost. The situation is, however, complicated by an ever decreasing number of engineers with sufficient design experience to reap the full benefits offered by CFD. With the large risks involved, novice designers of today are increasingly confined to refining old designs rather than gaining experience, like their forebears, through 'clean sheet' exercises. Hence it is desirable to capture the knowledge and experience of older designers, before it is lost, to assist the engineers of tomorrow. It is therefore the aim of this project to produce a design support tool which will not only store the appropriate CFD codes, but also provide a dynamic signpost (based on elicited knowledge and experience) to advise the engineer in their use. The signposting methodology developed for the aerospace industry [Clarkson and Hamilton, 1997] will provide the basic framework for the tool. This paper reviews current turbomachinery design practice (including an examination of the relevant CFD) in order to establish the important issues which a support tool must address. Current design support methodologies and their propriety are then reviewed, followed by a detailed description of the signposting concept. It then sets out a clear statement of the objectives for the research and the methods proposed to meet them. The paper concludes with a timetable of the work.

Evaluation of two alternative carbon capture and storage technologies

4 p.

Alternative trajectories for decarbonizing urban transportation

4 p.

Effects of Climate Change on the European Nuclear Power Sector

4 p.

Optimal Abandonment of Coal-Fired Stations in the EU

36 p.

Impacts of Climate Change on European Critical Infrastructures: The Case of the Power Sector

23 p.