SEM evaluation of in situ early bacterial colonization on a Y-TZP ceramic: A pilot study

This study aimed to evaluate the effect of surface glazing and polishing of yttrium-stabilized tetragonal zirconia polycrystal ceramic on early dental biofilm formation, as well as the effect of brushing on the removal of adhered bacteria. Two subjects used oral appliances with polished and glazed samples fixed to the right and left sides. After 20 minutes, 1 hour, and 6 hours, the subjects manually brushed the samples on the right side. The samples were analyzed using scanning electron microscopy. Granular material was verified on the samples, especially on irregular surfaces. After 1 hour, there was no significant difference between glazed and polished surfaces in terms of bacterial presence. However, glazed surfaces tended to accumulate more biofilm, and brushing did not completely remove the biofilm. Polished surfaces seem to present a lower tendency for biofilm formation. Int J Prosthodont 2007;20:419-422.

Molecular typing of bacterial strains isolated from the Clinics of Surgery and Face Traumatology at Ribeirão Preto University

The number of infectious illnesses and cross infection is spreading drastically among the professionals of the dentistry area. Controlling infections in dental offices is one of the greatest challenges for dentists and researchers of this area. In practice, contacts between professionals and infected patients are relatively common. The transmission of infectious illnesses from the health professionals to their patients is also possible, either by direct contact or due to lack of cares in relation to biosafety, increasing the cycle of cross infection. Molecular typing is necessary since these methods are an important tool to investigate the epidemiology of bacterial infections. Moreover, they are important for supplying information and precedents through the analysis of the infectious agents eletrophoretic profile. The aim of the present work was to analyze by molecular typing the genomic profile of aerobic bacteria isolated from the Clinics of Surgery and Face Traumatology, Ribeirão Preto University, through the technique of Random Amplified Polymorphic DNA (RAPD) and grouped based on similarity coefficients. Of two carried out collections, 55 strains were isolates belonging to the following groups: 12 Staphylococcus aureus; 13 Klebsiella oxytoca; 7 Klebsiella pneumoniae; 8 Pseudomonas aeruginosa; 5 Hafnia alvei; 5 Proteus vulgaris; 4 Escherichia coli; and 1 Proteus mirabilis. The adopted molecular typing strategy allowed the determination of the persistence of definitive strains at the collection environment, besides the identification of strains proceeding from the hands and gloves of the surgeon dentists, which could have been found in distant places as sinks and reflectors.

SEM analysis of the in situ early bacterial colonization on two novel feldspathic ceramics submitted to different types of glazing

Aim: The aim of this study was to evaluate in situ, the early bacterial colonization on feldspar-ceramics submitted to different glazing. Methods and Materials: Fourteen standardized disc specimens (diameter: 5 mm, thickness: 1.5 mm) of each of two micro-particulate feldspathic ceramics (VM7 and VM13, Vita) were produced according to manufacturers' specifications for a total of 28 specimens (24 for the analysis of biofilm and 4 for topographic analysis analyzing the ceramic surfaces). Specimens from each type of ceramic were submitted to two different glazing methods composing four groups: VM7 glazed using glazing liquid Vita Akzent® 25 (G1) and glaze firing (G2), VM13 glazed using glazing liquid (G3) and glaze firing (G4). Six individuals (n=6) wore oral appliances with four ceramic specimens, fixed on the buccal face of the appliances. After 8 hours, each sample was evaluated for the presence (1) or absence (0) of bacterial colonization under a scanning electron microscope (SEM) on five randomly selected fields. The value for each sample was cumulative of the results observed in the fields. One sample from each group was evaluated under a SEM to verify the topographic pattern. Results: There was no difference with regard to bacterial colonization between the feldspar-ceramics and between the glazing types (Kruskal-Wallis non-parametric test). Conclusion: Feldspar-ceramics submitted to firing or glaze firing with Vita Akzent® 25 present a similar condition for in situ bacterial colonization. The similar topographic pattern of the ceramic surfaces seems to have influenced the bacterial colonization.

Development and validation of a Xanthomonas axonopodis pv. citri DNA microarray platform (XACarray) generated from the shotgun libraries previously used in the sequencing of this bacterial genome

Background. From shotgun libraries used for the genomic sequencing of the phytopathogenic bacterium Xanthomonas axonopodis pv. citri (XAC), clones that were representative of the largest possible number of coding sequences (CDSs) were selected to create a DNA microarray platform on glass slides (XACarray). The creation of the XACarray allowed for the establishment of a tool that is capable of providing data for the analysis of global genome expression in this organism. Findings. The inserts from the selected clones were amplified by PCR with the universal oligonucleotide primers M13R and M13F. The obtained products were purified and fixed in duplicate on glass slides specific for use in DNA microarrays. The number of spots on the microarray totaled 6,144 and included 768 positive controls and 624 negative controls per slide. Validation of the platform was performed through hybridization of total DNA probes from XAC labeled with different fluorophores, Cy3 and Cy5. In this validation assay, 86% of all PCR products fixed on the glass slides were confirmed to present a hybridization signal greater than twice the standard deviation of the deviation of the global median signal-to-noise ration. Conclusions. Our validation of the XACArray platform using DNA-DNA hybridization revealed that it can be used to evaluate the expression of 2,365 individual CDSs from all major functional categories, which corresponds to 52.7% of the annotated CDSs of the XAC genome. As a proof of concept, we used this platform in a previously work to verify the absence of genomic regions that could not be detected by sequencing in related strains of Xanthomonas. © 2010 Moreira et al; licensee BioMed Central Ltd.

Easiness of use and validity testing of VS-SENSE device for detection of abnormal vaginal flora and bacterial vaginosis

Accessing vaginal pH is fundamental during gynaecological visit for the detection of abnormal vaginal flora (AVF), but use of pH strips may be time-consuming and difficult to interpret. The aim of this study was to evaluate the VS-SENSE test (Common Sense Ltd, Caesarea, Israel) as a tool for the diagnosis of AVF and its correlation with abnormal pH and bacterial vaginosis (BV). The study population consisted of 45 women with vaginal pH ≥ 4.5 and 45 women with normal pH. Vaginal samples were evaluated by VS-SENSE test, microscopy and microbiologic cultures. Comparing with pH strips results, VS-SENSE test specificity was 97.8% and sensitivity of 91%. All severe cases of BV and aerobic vaginitis (AV) were detected by the test. Only one case with normal pH had an unclear result. Concluding, VS-SENSE test is easy to perform, and it correlates with increased pH, AVF, and the severe cases of BV and AV. Copyright © 2010 Gilbert G. G. Donders et al.

Novel cellulose/NbOPO 4.nH 2O hybrid material from sugarcane bagasse

In recent years studies concerning the applications of lignocellulosic/ inorganic couples have resulted in the development of an interesting class of functional materials. In this work a cellulose/NbOPO 4.nH 2O hybrid using cellulose from surgacane bagasse was prepared and characterized in order to test for adsorption applications. The preparation process was conducted by carrying out metallic niobium dilution in hydrofluoric acid in the presence of nitric acid, then adding boric acid to form the complex and, finally, the cellulose sugar cane bagasse was added. Concentrated phosphoric acid was also inserted to precipitate hydrous niobium phosphate particles in the cellulose fiber. This material was characterized by X-ray diffractometry (XRD), thermogravimetry (TG/DTG), and scanning electronic microscopy (SEM) connected to an energy dispersive spectrophotometer (EDS). Results by SEM/EDS show that NbOPO 4.nH 2O was present in structure of the cellulose. During the preparation of the material, using boric acid it was observed that the formation of precipitate occurred in a shorter time than the material prepared without boric acid.

Reduction of bacterial adhesion to biocompatible polymer surfaces via plasma processing

Plasma processing of the surfaces of biomaterials is interesting because it enables modification of the characteristics of a surface without affecting bulk properties. In addition, the results are strongly influenced by the conditions of the treatment. Therefore, by adjusting the plasma parameters it is possible to tailor the surface properties to best fulfill the requirements of a given application. In this work, polyurethane substrates have been subjected to sulfur hexafluoride glow discharge plasmas. The influences of different SF 6 plasma exposure times and pressures on the adhesion of Staphylococcus aureus and Pseudomonas aeruginosa to the polymer have been investigated. The wettability and surface free energy have been evaluated via contact angle measurements. At low pressure (6.7 Pa) the contact angle decreases with increasing exposure time in the 180 s to 540 s interval, but at higher pressure (13.3 Pa) it increases as a function of the same variable. Bacterial adhesion has been quantified from in vitro experiments by determining the growth of colonies on Petri dishes treated with agar nutrient. It has been observed that the surface properties play an important role in microbe adhesion. For instance, the density of adhered P. aeruginosa decreased as the surface contact angle increased. S. aureus preferred to adhere to hydrophobic surfaces. © 2011 by Begell House, Inc.

Conductive nanocomposites based on cellulose nanofibrils coated with polyaniline-DBSA via in situ polymerization

Cellulose nanofibrils (CNF) were extracted by acid hydrolysis from cotton microfibrils and nanocomposites with polyaniline doped with dodecyl benzenesulphonic acid (PANI-DBSA) were obtained by in situ polymerization of aniline onto CNF. The ratios between DBSA to aniline and aniline to oxidant were varied in situ and the nanocomposites characterized by four probe DC electrical conductivity, ultraviolet-visible-near infrared (UV-Vis - NIR) and Fourier-transform infrared (FTIR) spectroscopies and X-ray diffraction (XRD). FTIR and UV-Vis/NIR characterization confirmed the polymerization of PANI onto CNF surfaces. Electrical conductivity of about 10 -1 S/cm was achieved for the composites; conductivity was mostly independent of DBSA/aniline (between 2 and 4) and aniline/oxidant (between 1 and 5) molar ratios. X-ray patterns of the samples showed crystalline peaks characteristic of cellulose I for CNF samples, and a mixture of both characteristic peaks of PANI and CNF for the nanocomposites. Field emission scanning electron microscopy (FESEM) characterization corroborated the abovementioned results showing that PANI coated the surface of the nanofibrils. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Fermentation characteristics of several carbohydrate sources for dog diets using the in vitro gas production technique

Fermentable carbohydrates are an important part of the canine diet. They can improve gastrointestinal health by modifying gut microbial population and metabolic activity. The present study compared the fermentation characteristics and kinetic patterns of 10 carbohydrate sources using the in vitro gas production technique (IVGPT) with dog faecal inoculum. The substrates tested were: pure cellulose (PC), carboxymethylcellulose (CMC), sugar-cane fibre (SCF), beet pulp (BP), wheat bran (WB), fructooligosaccharides (FOS), inulin, yeast cell wall (YCW), ground psyllium seed (PS), pea hulls (PH). All substrates were incubated at 39°C under anaerobic conditions with faeces collected from dogs as microbial inoculum. Gas production of fermenting cultures was recorded and after 48 h, pH, shortchain fatty acids (SCFA) and organic matter disappearance (OMD) were determined. The results confirm high fermentation by dog faecal bacteria of FOS and inulin that produced high amounts of propionate and that underwent very rapid fermentation. Three substrates (SCF, CMC and PC) were not able to support bacterial growth, with low gas and SCFA production, and high BCFA formation. The PH and BP showed moderate OMD and SCFA production. Wheat bran B underwent rapid fermentation and generated a high proportion of butyrate. Psyllium seeds underwent slow fermentation with delayed gas production, supporting a high formation of SCFA, with an adequate amount of butyrate for bacterial growth while YCW, which showed a delayed fermentation, gave moderate SCFA production. The fermentation characteristics of PS and YCW suggest their potential use in promoting a more distal fermentation on intestinal tract. © Copyright S. Calabrò et al., 2013 Licensee PAGEPress, Italy.

Thermal behavior of lignin and cellulose from waste composting process

The lignin and cellulose were extracted from reference material (leaves and twigs) and food of compost at different times composting: zero (raw), 30, and 120 days. According to thermogravimetric analysis and its derivative and differential scanning calorimetry curves for these samples, were verified during composting process there were considerable changes in its thermal profiles, as well as, characteristics lignin in cellulose samples and cellulose in lignin samples. These features were found by fourier transformed infrared spectroscopy. © 2012 Akadémiai Kiadó, Budapest, Hungary.

Incorporation of dithiooxamide as a complexing agent into cellulose for the removal and pre-concentration of Cu(II) and Cd(II) ions from natural water samples

The present study describes the incorporation of a complexing agent, dithiooxamide, into microcrystalline cellulose for use in the pre-concentration of Cu(II) and Cd(II) ions from aqueous samples. The FTIR spectrum of the adsorbent exhibited an absorption band in the region of 800 cm-1, which confirmed the binding of the silylating agent to the matrix. Elemental analysis indicated the amount of 0.150 mmol g-1 of the complexing agent. The adsorption data were fit to the modified Langmuir equation, and the maximum amount of metal species extracted from the solution, Ns, was determined to be 0.058 and 0.072 mmol g-1 for Cu(II) and Cd(II), respectively. The covering fraction φ, which was 0.39 and 0.48 for Cu(II) and Cd(II), respectively, was used to estimate a 1:2 (metal:ligand) ratio in the formed complex, and a binding model was proposed based on this information. The adsorbent was applied in the pre-concentration of natural water samples and exhibited an enrichment factor of approximately 50-fold for the species studied, which enabled its use in the analysis of trace metals in aqueous samples. The system was validated by the analysis of certified standard (1643e), and the adsorbent was stable for more than 20 cycles, thus enabling its safe reutilization. © 2012 Elsevier B.V. All rights reserved.

Do Atopobium vaginae, Megasphaera sp. and Leptotrichia sp. change the local innate immune response and sialidase activity in bacterial vaginosis?

Objectives: To investigate if the participation of Atopobium vaginae, Megasphaera sp. and Leptotrichia sp. in the bacterial community of bacterial vaginosis (BV) is associated with distinct patterns of this condition. Methods: In this cross-sectional controlled study, 205 women with BV and 205 women with normal flora were included. Vaginal rinsing samples were obtained for measuring the levels of pro-inflammatory cytokines and bacterial sialidases. Real-time PCR was used to quantify the BV-associated bacteria and to estimate the total bacterial load using the 16S rRNA. Principal component analysis (PCA) using the measured parameters was performed to compare the BV samples with lower and higher loads of the species of interest. Results: Higher bacterial load (p<0.001), levels of interleukin 1-β (p<0.001) and sialidase activity (p<0.001) were associated with BV. Women with BV and higher relative loads of A vaginae, Megasphaera sp. and Leptotrichia sp. presented increased sialidase activity, but unchanged cytokine levels. PCA analysis did not indicate a different pattern of BV according to the loads of A vaginae, Megasphaera sp. and Leptotrichia sp. Conclusions: Greater participation of A vaginae, Megasphaera sp. and Leptotrichia sp. in vaginal bacterial community did not indicate a less severe form of BV; moreover, it was associated with increased sialidase activity.

Sialidase activity in aerobic vaginitis is equal to levels during bacterial vaginosis

Objective: To evaluate levels of proinflammatory cytokines and sialidase activity in aerobic vaginitis (AV) in relation to normal vaginal flora and bacterial vaginosis (BV). Study design: In this cross-sectional study, a total of 682 consecutive non-pregnant women attending the gynecology service were assessed and 408 women were included. Vaginal rinsing samples were collected from 223 women with microscopic finding of BV (n = 98), aerobic vaginitis (n = 25) and normal flora (n = 100). Samples were tested for interleukin (IL)-1β, IL-6, IL-8, tumor necrosis factor (TNF)-α, and sialidase activity. Results: Compared to women with normal flora, vaginal levels of IL-1β were highly increased in both BV and AV (p < 0.0001). Significantly higher vaginal IL-6 was detected in AV (p < 0.0001) but not in BV, in relation to normal flora. Women with AV also presented increased IL-8 levels (p < 0.001), while those with BV presented levels similar to normal flora. Sialidase was increased in BV and AV compared with the normal group (p < 0.0001) but no difference in sialidase activity was observed between BV and AV. Conclusion: A more intense inflammatory host response occurs for AV than for BV when compared with normal flora. Furthermore, the increased sialidase activity in AV and BV indicates that both abnormal vaginal flora types can be harmful to the maintenance of a healthy vaginal environment. © 2012 Elsevier B.V.

Qualitative analysis of preputial and vaginal bacterial microbiota in owl monkeys (Aotus azarai infulatus) raised in captivity

Background: The aim of this study was to identify the aerobic bacteria of the preputial and vaginal microbiota in owl monkeys that have been raised in captivity and to evaluate the antimicrobial susceptibility of these bacteria by gender and social organization. Methods: Thirty clinically healthy Aotus azarai infulatus were used. A total of 134 samples were collected, 60 from the preputial mucosa and 74 from the vaginal mucosa. An automated system of bacterial identification was used. Results and Conclusions: Staphylococcus intermedius and Proteus mirabilis were the microorganisms that were most frequently identified according to gender and social organization. The antimicrobial susceptibility of the isolated gram-positive bacteria was similar in both sexes. However, the gram-negative strains had some differences. The aerobic bacterial population of the vaginal and preputial microbiota is similar in owl monkeys, and there are no differences in the number and bacterial species according to sex and social organization. © 2012 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.