Avaliação da perda óssea alveolar em pacientes encaminhados à especialista em periodontia: estudo radiográfico

The aim of this study was to evaluate the mean of alveolar bone loss (%) in radiographies of patients referred to specialist for periodontal treatment. Full mouth series of periapical radiographies (paralelism technique) were used. A total of 9808 proximal surfaces in 4804 teeth of 213 patients (90 males and 123 females), mean age, 44.3 years, were assessed. The alveolar bone loss was measured in relation to root lenght expressed as an average similar to Schei 's technique (1959) without the use of ruler. The references used were the distances cement-enamel juntion (CEJ) - alveolar crest (AC) and CEJ- dental apex taken with a digimatic caliper. The results showed that the mean values of alveolar bone loss (%ABL) was 22.39%. Men showed higher mean values of %ABL than women; the %ABL increased with the age, but the difference among age groups was no statistical significant (p>0.05); the mean values of %ABL of distal surfaces was higher than mesial surfaces (p<0.01), ríght quadrants exhibited higher %ABL values than left quadrants (p<0.01); maxillary sites showed mean values of %ABL higher than mandibular sites; the highest mean values of %ABL was found in molar group, followed by incisor groups, and premolar group; the canine group exhibited lower mean values of %ABL; the differences among the groups was considered statitistically significant (p<0.01). lt was suggested the usage of this technique in the dentistry offices and radiological services for the patient 's documentation and assortment and for later comparison about alveolar bone level

Influência de agentes clareadores na resistência de união de um sistema restaurador ao esmalte em função do tempo de armazenamento em saliva artificial

Pós-graduação em Odontologia Restauradora - ICT

Nanocompósitos multifuncionas de fibroína reforçados com biocelulose

This work shows the preparation and characterization of the new nanocomposites based on fibroin and biocellulose. Bacterial cellulose (BC) is an exopolysaccharide produced by bacteria of the genus Gluconacetobacter, which it has identical chemical structure of the cellulose from plants and it has gained attention in the field of research for its unique properties as excellent mechanical properties when dry and hydrated , higher capacity of water retention, moldability , biodegradability and excellent biological affinity . Silk fibroin (SF) is a structural protein present in the cocoon of the silkworm, Bombyx mori, has been identified as suitable for developing optical devices, tissue engineering application, enzyme immobilization, controlled release drug agent biopolymer. Silk fibroin/bacterial cellulose nanocomposite films were prepared impregnating different cellulose charges (0.5 %, 1.0 %, 1.5 %, 2.5 %, 5.0 % and 10.0 %) weight/weight. According mechanical tests and water and Paynes's cup permeability showed that SF/BC 1% nanocomposite has the most relevant results. Poliethylenoglicol (PEG) containing SF films improved optical and mechanical properties when compared to pristine SF film. New SF/BC nanocomposites could be applied in Medicine, as biodegradable packaging and flexible substrates for OLEDs.

Raiz dentária impelida para o seio maxilar após exodontia: uma opção de tratamento

Introduction: Upper teeth, especially first premolars and molars, can have a close anatomical relationship with the floor of maxillary sinus. For this reason, accidental displacement of dental roots into the sinus could happen during exodontic procedures. Objective: Description the treatment performed to remove a tooth root within the maxillary sinus, displaced during an extraction procedure. Case Report: Female patient, 39 years of age, which reported being subjected to the extraction of the element 26 for about two months. The patient was reported by the practitioner who performed the extraction that a root was pushed into the maxillary sinus. The treatment plan included surgery to remove the root within the maxillary sinus. Final Comments: Clinicians should be careful during extractions, to prevent these accidents. However, if such complications occur, access to the maxillary sinus is the best treatment option.

Quarto molar retido: a importância do diagnóstico precoce

Introductions: A supernumerary tooth is one that is additional to the normal series and can be found in almost any region of the dental arch. Its etiology is not fully understood. With regard to its prevalence, it occurs more commonly in permanent dentition and twice as often in men than in women. Supernumerary teeth are classified according to their morphology and location. Their presence can cause problems such as failure of eruption, displacement of teeth, crowding and odontogenic cysts and tumors. The diagnosis is usually by routine radiographs, for the majority of such teeth are impacted and asymptomatic. Objective and Case report: The purpose of this study was to make a brief review of the relevant literature and report one clinical case of the female patient, 23 years, melanoderma, featuring three quarters molars. Final considerations: The early diagnosis proved to be important for the resolution of the case in order to minimize or even prevent the development of complications and thus establish a proper plan of treatment.

Análise por computação gráfica das alterações produzidas em próteses totais superiores imersas diretamente em água e pela termociclagem

Objectives: This study aimed to assess dimensional changes in acrylic resin base and artificial teeth position after water storage and thermocycling using computer graphics measurements. Methods: Twenty-four waxed replicas were obtained from a previous upper complete denture. For linear measurements, points in cusps tips of left central incisor and second premolars and molars were marked in one of the prostheses with graphite and transferred to the others using an acrylic resin guide. The prostheses were scanned after waxing, polymerization and treatments and the images were exported to “AutoCad 2002 Today®” software for measurements. Results: There was no statistically significant difference in changes of each segment for each group and between the phases evaluated after polymerization and thermocycling. In groups I and III, the values after polymerization are higher than those after treatment, which suggests shrinkage while the prostheses in group II have expanded. Conclusion: The three groups exhibited artificial teeth movement after tests in comparison to the polymerized prosthesis. The prostheses submitted to water storage in kiln at 36ºC during seven days showed different behavior than the other groups.

Influência do formato do rebordo alveolar sagital em reabilitações com associação de prótese parcial removível de extremidade livre e implante ósseo integrado

The association of mandibular distal extension removable partial dentures with an osteointegrated implant is a treatment option at hasn't been fully explored by modern rehabilitation dentistry yet. The objective of this study is to evaluate, by means of the bidimensional method of finite elements, the distribution of tension on the structures supporting the distal extension removable partial denture (DERPD), associated to a 10.0 x 3.75 mm osteointegrated implant with an ERA retention system, in alveolar ridges of different shapes. Eight models were created, representing, from a sagittal perspective: Model A (MA) – a half arch with a horizontal ridge without posterior support, with the presence of the lower left canine, and a conventional DERPD, with metallic support in the incisal aspect of this canine, as replacement for the first and second pre-molars and the first and second molars of the lower left half arch; Model B (MB) – similar to MA, but different because of the presence of a 3.75 x 10.00 mm implant with an associated ERA retention system in the posterior region of the DERPD base; Model C (MC) - similar to MA, however with a distally ascending ridge format; Model D (MD) – similar to MC, but different because there is an implant associated to a retention system; Model E (ME) - similar to MA, however with a distally descending ridge format; Model F (MF) – similar to ME, but ditfferent in the sense that there is an implant with an associated ERA retention system; Model G (MG) – similar to MA, however with a distally descending-ascending ridge format; Model H (MH) – similar to MG, but different in the sense that there is an implant with an associated ERA retention system. The finite element program ANSYS 9.0 was used to load the models with vertical forces of 50 N, on each cuspid tip. The format of distal descending edge (ME and MF) was that presented worse results, so in the models with conventional RPD as in the models with RPD associated to the implant and ERA system of retention, for the structures gingival mucosa and tooth support. 1) the distally descending ridge presented the most significant stress in the model with the conventional RPD (ME) or with a prosthesis associated to an implant (MF) and 2) the horizontal ridge (MB) provided more relief to the support structures, such as the tooth and the spongy bone, when there was an implant associated to an ERA retention system. The incorporation of the implants with the ERA system retention, in the posterior area of the toothless edge, it promotes larger stability and retention to PPREL, improving the patient's masticatory acting and, consequently, its comfort and function.

Displasia cementária periapical: considerações sobre conduta e relato de caso

A displasia cementária periapical (DCP) consiste em uma lesão óssea não neoplásica geralmente assintomática, sendo detectada em exame radiográfico de rotina. Em seu primeiro estágio apresenta-se radigraficamente semelhante a uma lesão periapical inflamatória, todavia na DCP os dentes encontram-se vitais. Neste relato de caso foi realizado o acompanhamento por sete meses de uma paciente negra com 37 anos de idade afetada por DCP no periápice de incisivos, caninos e pré-molares inferiores bilateralmente. Ao exame radiográfico foi possível notar que a lesão apresentou-se em dois estágios: osteolítico e de maturação. Os dentes reagiram positivamente aos testes de vitalidade/sensibilidade pulpar descartando, com auxílio do exame de imagem, diversas hipóteses diagnósticas do grupo das periapicopatias crônicas, contribuindo assim para uma adequada escolha do tratamento, evitando iatrogenias.

Confocal laser scanning microscopy investigation of bond interfaces involved in fiber glass post cementation

Objective: This confocal microscopy study evaluated the cement/dentin and cement/post interfaces along theroot canalwallswhenfiberglasspostswerebonded to dentin using different types of cements. Material & Methods: Thirty endodontically treated premolars were divided into 3 groups according to the adhesive materials used in the bonding procedure: Prime & Bond 2.1/Self Cure + Enforce, RelyX Unicem and RelyX Luting. Rhodamine B dye was incorporated in the luting materials for the cementation of the fiber glass posts (Exacto, Angelus) to dentin. Three transversal slices (apical, middle and coronal) were examined under confocal laser scanning microscopy. Statistical analysis was performed using the Kappa, Kruskal-Wallis and Dunnet tests, in a significance level of 5%. Results: The Prime & Bond 2.1/Self Cure + Enforce presented a uniform formation of tags in the dentin but gaps in the cement/dentin interface. The RelyX Unicem and RelyX Luting presented an adhesive interface with a fewer amount of gaps, but showed shorter tag formation than the Enforce system. All cements presented the same pattern of bubbles inside the cements. The RelyX Luting presented a greater amount of cracks inside the cement in comparison with the other cements in the coronal third, while no difference was observed between RelyX Unicem and Enforce. The RelyX Luting showed the lowest quantity of cement penetration into the post. Conclusion: In general, the quality of bonding interfaces of fiber posts luted to root canals was affected by both location and type of cement.

Cementoblastoma benigno: relato de um caso

O cementoblastoma é uma neoplasia benigna que envolve dentes vitais, frequentemente os molares ou pré molares inferiores. Está associado à raiz dentária podendo provocar a sua reabsorção. Cresce muito lentamente e é assintomático, com exceção dos casos em que há expansão das corticais. Radiograficamente aparece como uma massa radiopaca, bem definida, com contorno radiolúcido, que se sobrepõe à raiz do dente. O diagnóstico final normalmente é feito pelo exame histopatológico, mas o diagnóstico clínico é facilmente realizado, através da avaliação radiográfica. Paciente leucoderma, do sexo masculino, 54 anos realizou uma radiografia panorâmica digital para uma avaliação geral. Na imagem, foi observada uma massa radiopaca, bem delimitada, medindo aproximadamente 2 cm de diâmetro envolvendo as raízes do dente 47. Para uma melhor avaliação do caso, foi realizada uma tomografia de feixe cônico, onde foi observada que a massa radiopaca estava aderida às raízes do dente 47, causando reabsorção externa das mesmas, apresentando as dimensões de aproximadamente 2,7 cm no sentido ântero-posterior, 2 cm da base da mandíbula em direção à cortical alveolar e 1,7 cm de vestibular para lingual. Foi também observada expansão da cortical óssea lingual, sem rompimento. O diagnóstico por meio da tomografia foi de cementoblastoma. Devido à idade do paciente e a ele não apresentar sintomatologia, foi proposto o acompanhamento da lesão. O paciente encontra-se em proservação há 18 meses e não houve alteração do quadro clínico.

Lesão fibro-óssea na mandíbula associada à osteomielite

A displasia cemento-óssea é o tipo mais comum dentre as lesões fibro-ósseas, podendo apresentar-se de 3 maneiras: periapical, focal e florida. Paciente parda, de 53 anos, compareceu com queixa de “secreção na gengiva” e histórico de exodontia na região há 8 meses. À inspeção apresentou uma leve tumefação na região vestibular posterior esquerda da mandíbula e uma pequena fístula drenando pus. Realizou-se uma radiografia panorâmica, que revelou uma lesão de radiopacidade mista na região de molares inferiores direitos, medindo 2 cm de diâmetro; outra lesão radiopaca na região de pré-molares esquerdos, de 6mm de diâmetro - ambas bem delimitadas; e outra área radiolúcida com radiopacidade central, com halo radiopaco na região infectada, medindo 1,5 cm de diâmetro. O diagnóstico presuntivo foi de displasia cemento-óssea infectada, cisto periapical infectado associado à displasia e osteomielite. Após antibioticoterapia, realizou-se biópsia e curetagem da área. Microscopicamente apresentou áreas de tecido cemento-ósseo em forma trabecular e no local onde deveria haver tecido fibroso, presença de biofilme bacteriano, conteúdo hemorrágico e restos necróticos. No tecido de granulação removido observou-se intenso infiltrado inflamatório e áreas de calcificação cementóide. As características microscópicas juntamente com os achados clínicos e radiográficos levaram ao diagnóstico de osteomielite aguda supurativa secundária a lesão fibro-óssea, sugestiva de displasia cemento-óssea florida.

Avaliação da movimentação dentária induzida após trauma de subluxação: estudo experimental em ratos

Objetivo: avaliar as alterações histológicas ocorridas na área periodontal de molares de ratos submetidos à movimentação dentária induzida (MDI), logo após um trauma intencional (subluxação). Métodos: quarenta ratos Wistar machos adultos (Rattus norvegicus albinus) foram selecionados. Os animais foram divididos em oito grupos (n = 5), de acordo com a combinação das variáveis: Grupo 1 – controle (sem trauma e sem MDI); Grupo 2 – MDI; Grupos 3, 4, 5 e 6 – grupos de trauma dentoalveolar correspondendo, respectivamente, para 1, 3, 8 e 10 dias após o trauma; Grupos 7 e 8 – os molares murinos foram submetidos a um impacto de 900cN e, de um e três dias após o evento trauma, o movimento do dente foi induzido. Os primeiros molares superiores dos animais foram movidos mesialmente durante sete dias, com uma mola fechada (50cN). Após período experimental de cada grupo, os animais foram sacrificados por overdose anestésica e as maxilas direitas foram removidas e processadas para análise histológica qualitativa. Resultados: nos animais dos grupos 3, 4, 5 e 6, as alterações histológicas não foram muito significativas. Consequentemente, o efeito do movimento dentário induzido logo após um evento de subluxação (grupos 7 e 8) foi muito semelhante ao descrito para o grupo 2. Conclusão: não houve diferença na qualidade do reparo periodontal quando a MDI foi aplicada aos dentes que sofreram um trauma de subluxação.

Tumor odontogênico de células granulares

Introduction: the granular cell odontogenic tumors are an uncommon neoplasm with benign clinical behavior. The lesion occurs over a wide age range with a typically predilection for the mandibular canine and molar regions. Aim: present a granular cell odontogenic tumor literature review. Conclusions: the tumor don’t present an aggressive biological behavior although recurrences can occur. The lesion is treated by conservative surgery with curettage and enucleation as election procedures.

Avaliação do efeito do plasma não térmico na resistência adesiva à dentina supericial e profunda

Pós-graduação em Odontologia Restauradora - ICT

Análise histológica e imunoistoquímica do tecido pulpar de ratos Wistar submetidos a procedimento clareador com duas concentrações de peróxido de hidrogênio

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)