948 resultados para 612.044


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Perforation of inferior vena cava (IVC) by filter struts ranges from 9% to 24%, and clinical sequelae and complications are unpredictable. The aim of this article was to report an unusual case of late complication of IVC filter that caused an IVC wall perforation and penetration of the filter's hooks in the aorta, which was treated by endovascular procedure. Molding strut tip by balloon angioplasty, its accommodation with a bare stent, and its coverage and protection with an endoprosthesis is probably the first technique reported so far in this situation.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Background: Regardless significant therapeutic advances, mortality and morbidity after myocardial infarction (MI) are still high. For a long time, the importance of right ventricle (RV) function has been neglected. Recently, RV dysfunction has also been associated with poor outcomes in the setting of heart failure. The shape, location, and contraction conditions make the RV chamber assessment technically challenging.Methods: Our study identified clinical characteristics and left ventricle (LV) echocardiographic data performed 3-5 days after MI that could be associated with RV dysfunction (RV fractional area change [FAC] < 35%) 6 months after MI.Results: The RV dysfunction group consisted of 11 patients (RV FAC 29.4% +/- 5.2) and the no RV dysfunction group of 71 patients (RV FAC 43.7% +/- 5.1); (P < 0.001). Both groups presented the same baseline clinical characteristics. Left atrium (LA), interventricular septum (IVS), and left ventricular posterior wall (LVPW) were larger in RV dysfunction than in no RV dysfunction. Conversely, E wave deceleration time (EDT) was lower in RV dysfunction when compared with no RV dysfunction. Left atrium(adj) (adjusted by gender, age, infarct size, and body mass index) (odds ratio [OR], 1.22; confidence interval [CI], 1.016-1.47; P = 0.032), interventricular septum(adj) (OR, 1.49; CI, 1.01-2.23; P = 0.044), and E wave deceleration time(adj) (OR, 0.98; CI, 0.97-0.98; P = 0.029) assessed soon after MI predicted RV failure after 6-months.Conclusions: LV diastolic dysfunction, resulting from anterior MI and assessed 3-5 days after the event, may play an important role in predicting RV dysfunction 6 months later.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Foram realizados dois experimentos (E) com 204 leitões Large White (E1: dos 7,23 aos 12,32 kg; e E2: dos 12,64 aos 23,81 kg). O delineamento experimental foi de blocos ao acaso com quatro níveis de treonina na ração (E1: 0,80; 0,87; 0,93 e 0,99 %; e E2: 0,69; 0,74; 0,80 e 0,85 %); oito (E1) e nove (E2) repetições para o consumo diário de ração (CDR), ganho diário de peso (GDP), ganho diário de peso ajustado (GDPA) e conversão alimentar (CA); e cinco repetições para uréia plasmática (U). Não se observaram diferenças no CDR e GDP (P>0,10). Verificaram-se efeitos quadráticos da treonina no GDPA do E1 (P=0,086) e E2 (P=0,052), na CA do E2 (P=0,035) e na U do E1 (P=0,002), bem como efeito linear negativo na CA do E1 (P=0,030) e U do E2 (P=0,044). O nível de 0,89% de treonina minimizou o teor plasmático de uréia e o de 0,94% maximizou o ganho diário de peso ajustado no E1, enquanto no E2 0,76% de treonina na ração maximizou o ganho diário de peso ajustado e minimizou a conversão alimentar.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Purpose: The aim of this study was to evaluate the satisfaction of patients rehabilitated with zygomatic fixtures and prosthesis with immediate loading.Materials and Methods: The study selected patients who were rehabilitated with zygomatic implants at the clinic of the Latin American Institute for Dental Research and Education (ILAPEO. Curitiba-PR. Brasil) between 2005 and 2009. The patients were asked to answer a control-questionnaire during their follow-up visits. Data were collected regarding the level of patient satisfaction, reason for dissatisfaction, number of post-operative clinical sessions, and the type of complication. Sixteen patients were selected: 10 females and 6 males.Results: Half of the patients were completely satisfied while the other half were satisfied with some complaints. The complaints were related to hygiene, esthetics, phonetics, and discomfort during chewing. Regarding the post-operative evaluation, 50% of the patients were attended due to the prosthesis (62.5%) and the implant (37.5%).Conclusions: The treatment with zygomatic fixtures is predictable and reliable. The patients were satisfied both with implants and prosthesis. (C) 2012 American Association of Oral and Maxillofacial Surgeons J Oral Maxillofac Surg 70: 314-319, 2012

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Purpose: The purpose of this study was to compare the artificial tooth positional changes following the flasking and polymerization of complete dentures by a combination of two flasking methods and two polymerization techniques using computer graphic measurements.Materials and Methods: Four groups of waxed complete dentures (n = 10) were invested and polymerized using the following techniques: (1) adding a second investment layer of gypsum and conventional water bath polymerization (Control), (2) adding a second investment layer of gypsum and polymerization with microwave energy (Gyp-micro), (3) adding a second investment layer of silicone (Zetalabor) and conventional polymerization (Silwater), and (4) adding a second investment layer of silicone and polymerization with microwave energy (Silmicro). For each specimen, six segments of interdental distances (A to F) were measured to determine the artificial tooth positions in the waxed and polymerized stages using software program AutoCad R14. The mean values of the changes were statistically compared by univariate ANOVA with Tukey post-hoc test at 5% significance.Results: There were no significant differences among the four groups, except for segment D of the Silmicro group (-0.004 +/- 0.032 cm) in relation to the Gypwater group (0.044 +/- 0.031 cm) (p < 0.05), which presented, repectively, expansion and shrinkage after polymerization.Conclusions: Within the limitations of this study, it was concluded that although the differences were not statistically significant, the use of a silicone investment layer when flasking complete dentures resulted in the least positional changes of the artificial teeth regardless of the polymerization technique.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In order to prolong the clinical longevity of resilient denture relining materials and reduce plaque accumulation, incorporation of antimicrobial agents into these materials has been proposed. However, this addition may affect their properties. Objective: This study evaluated the effect of the addition of antimicrobial agents into one soft liner (Soft Confort, Dencril) on its peel bond strength to one denture base (QC 20, Dentsply). Material and Methods: Acrylic specimens (n=9) were made (75x10x3 mm) and stored in distilled water at 37 degrees C for 48 h. The drug powder concentrations (nystatin 500,000U - G2; nystatin 1,000,000U - G3; miconazole 125 mg - G4; miconazole 250 mg - G5; ketoconazole 100 mg - G6; ketoconazole 200 mg - G7; chlorhexidine diacetate 5% - G8; and 10% chlorhexidine diacetate - G9) were blended with the soft liner powder before the addition of the soft liner liquid. A group (G1) without any drug incorporation was used as control. Specimens (n=9) (75x10x6 mm) were plasticized according to the manufacturers' instructions and stored in distilled water at 37 degrees C for 24 h. Relined specimens were then submitted to a 180-degree peel test at a crosshead speed of 10 mm/min. Data (MPa) were analyzed by analysis of variance (alpha=0.05) and the failure modes were visually classified. Results: No significant difference was found among experimental groups (p=0.148). Cohesive failure located within the resilient material was predominantly observed in all tested groups. Conclusions: Peel bond strength between the denture base and the modified soft liner was not affected by the addition of antimicrobial agents.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objective. The objective of this study was to evaluate the radiopacity of white Portland cement (PC) associated with bismuth oxide (Bi(2)O(3)), barium sulfate (BaSO(4)), iodoform (CHI(3)), and zirconium oxide (ZrO(2)). White mineral trioxide aggregate (WMTA) and PC without radiopacifier were used as positive and negative controls, respectively.Study design. Following International Organization for Standardization (ISO) 6876/2001, 5 circular specimens (10 x 1 mm) were made from each material. After the materials set, radiographs were taken using occlusal film and a graduated aluminum step-wedge varying in thickness from 2 to 16 mm. The dental X-ray unit (GE1000) was set at 50 Kvp, 10 mA, 18 pulses/s, and distance of 33.5 cm. The radiographs were digitized, and radiopacity was compared with the aluminum step-wedge, using Wixwin-2000 software (Gendex). Data (mm Al) were analyzed using analysis of variance and Tukey tests.Results. The PC + Bi(2)O(3) and WMTA samples presented greater radiopacity (5.88 and 5.72 mm Al, respectively), followed by PC + ZrO(2) (3.87 mm Al) and PC + CHI(3) (3.50 mm Al). The PC + BaSO(4) and PC samples presented the lowest radiopacity values (2.35 and 1.69 mm Al, respectively), which were below the minimum value recommended by the ISO.Conclusion. Analysis of the present results led to the conclusion that all of the materials tested presented acceptable radiopacity, except PC + BaSO(4) and pure PC. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2009; 108: 628-632)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objetivou-se avaliar a atividade antifúngica dos óleos essenciais de Ocimum basilicum L. (manjericão), Cymbopogon martinii L. (palmarosa), Thymus vulgaris L. (tomilho) e Cinnamomum cassia Blume (canela da china) sobre cepas de Candida albicans isoladas de pacientes HIV positivos e cepa padrão (ATCC 76845). Quinze amostras clínicas de C. albicans (C1-C15) foram repicadas em ágar Sabouraud Dextrose, para confecção de suspensões em solução salina estéril (0,9%) contendo 1,5 x 10(6) UFC mL-1. As emulsões dos óleos essenciais foram preparadas em água destilada estéril e tween 80, com concentrações variando entre 1024 µg mL-1 e 4 µg mL-1. A ação antifúngica foi determinada por meio da Concentração Inibitória Mínima (CIM) utilizando-se a técnica da microdiluição. Foram utilizados como controles positivos a nistatina e o miconazol (50 µg mL-1). Os testes foram realizados em triplicata, sendo a CIM, a menor concentração capaz de inibir o crescimento das leveduras, observada por método visual de acordo com a turvação do meio de cultura. Para C. albicans (ATCC 76845), a CIM do óleo essencial de C. cassia foi 64 µg mL-1, enquanto para óleo de C. martinii foi 1024 µg mL-1. Para as cepas clínicas, verificou-se que a CIM de C. cassia para 80% das cepas foi 64 µg mL-1, sendo a variação dos valores da CIM entre 128 µg mL-1 e 64 µg mL-1. Observou-se que para 66,6% das amostras clínicas, a CIM de C. martinii foi 612 µg mL-1. Constatou-se que a nistatina não apresentou atividade frente às cepas clínicas (C1-C15), enquanto a atividade antifúngica do miconazol foi verificada em 100% das amostras. Não se constatou atividade antimicrobiana dos óleos essenciais de O. basilicum e T. vulgaris, nas concentrações avaliadas. Concluiu-se que os óleos essenciais de C. cassia e C. martinii, em diferentes concentrações, apresentam atividade antifúngica sobre cepas de C. albicans isoladas de pacientes HIV positivos e cepa padrão (ATCC 76845). Entretanto não foi observada inibição antimicrobiana para os óleos de O. basilicum e T. vulgaris.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The identification of genes essential for survival is important for the understanding of the minimal requirements for cellular life and for drug design. As experimental studies with the purpose of building a catalog of essential genes for a given organism are time-consuming and laborious, a computational approach which could predict gene essentiality with high accuracy would be of great value. We present here a novel computational approach, called NTPGE (Network Topology-based Prediction of Gene Essentiality), that relies on the network topology features of a gene to estimate its essentiality. The first step of NTPGE is to construct the integrated molecular network for a given organism comprising protein physical, metabolic and transcriptional regulation interactions. The second step consists in training a decision-tree-based machine-learning algorithm on known essential and non-essential genes of the organism of interest, considering as learning attributes the network topology information for each of these genes. Finally, the decision-tree classifier generated is applied to the set of genes of this organism to estimate essentiality for each gene. We applied the NTPGE approach for discovering the essential genes in Escherichia coli and then assessed its performance. (C) 2007 Elsevier B.V. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Canine hepatozoonosis is a tick-borne disease caused by protozoans of the genus Hepatozoon. Several tick species have been implicated as potential vectors. Therefore, extensive studies are needed to determine the 'natural' endemic cycle of this parasite. This paper presents the first report of the presence of Hepatozoon canis oocysts in Rhipicephalus (Boophilus) microplus collected from an infected dog. (C) 2011 Elsevier B.V. All rights reserved.