982 resultados para 447
Resumo:
The purpose of this study was to determine the Minimum Inhibitory Concentration (MIC) of pure or mixed chemicals for Saccharomyces cerevisiae and Lactobacillus fermentum in the samples isolated from distilleries with serious bacterial contamination problems. The biocides, which showed the best results were: 3,4,4' trichlorocarbanilide (TCC), tested at pH 4.0 (MIC = 3.12 mg/l), TCC with benzethonium chloride (CBe) at pH 6.0 (MIC = 3.12 mg/l) and TCC mixed with benzalkonium chloride (CBa) at pH 6.0 (MIC = 1.53 mg /l). If CBa was used in sugar cane milling in 1:1 ratio with TCC, a 8 times reduction of CBa was possible. This formulation also should be tested in fermentation steps since it was more difficult for the bacterium to develop resistance to biocide. There was no inhibition of S. cerevisiae and there were only antibiotics as an option to bacterial control of fuel ethanol fermentation by S. cerevisiae.
Resumo:
The aim of this study was to analyze photosynthate partitioning in tomato photomorphogenic mutants at the ends of the vegetative (40 days after emergence [DAE]) and reproductive (69 DAE) stages and to determine its interaction with morphoanatomical aspects. The mutants aurea (au), phytochrome-deficient, high pigment-1 (hp1), light-exaggerated response, were studied along with the non-mutant Micro-Tom (MT) cultivar. The plants were analyzed at 40 and 68 DAE to identify photosynthate source organs and tissues as well as the target organs of remobilized photosynthate during the reproductive stage. The plants were evaluated for their internal and external morphology as well as the percentage of dry mass of their organs. Photosynthate allocation in the hp1 mutant occurred primarily in the roots and leaves, and allocation in the au mutant occurred primarily in fruits. The au mutant showed a high capacity for photosynthate remobilization to fruit during the reproductive stage, and the predominant sources of these remobilized photosynthates were the leaf spongy parenchyma, the root vascular cylinder and the marrow stem.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Purpose: The aim of this study was to investigate the influence of Nd:YAG laser on the shear bond strength to enamel and dentin of total and self-etch adhesives when the laser was applied over the adhesives, before they were photopolymerized, in an attempt to create a new bonding layer by dentin-adhesive melting.Material and Methods: One-hundred twenty bovine incisors were ground to obtain flat surfaces. Specimens were divided into two substrate groups (n=60): substrate E (enamel) and substrate D (dentin). Each substrate group was subdivided into four groups (n=15), according to the surface treatment accomplished: X (Xeno III self-etching adhesive, control), XL (Xeno III + laser Nd:YAG irradiation at 140 mJ/10 Hz for 60 seconds + photopolymerization, experimental), S (acid etching + Single Bond conventional adhesive, Control), and SL (acid etching + Single Bond + laser Nd:YAG at 140 mJ/10 Hz for 60 seconds + photopolymerization, experimental). The bonding area was delimited with 3-mm-diameter adhesive tape for the bonding procedures. Cylinders of composite were fabricated on the bonding area using a Teflon matrix. The teeth were stored in water at 37 degrees C/48 h and submitted to shear testing at a crosshead speed of 0.5 mm/min in a universal testing machine. Results were analyzed with three-way analysis of variance (ANOVA; substrate, adhesive, and treatment) and Tukey tests (alpha=0.05). ANOVA revealed significant differences for the substrate, adhesive system, and type of treatment: lased or unlased (p<0.05). The mean shear bond strength values (MPa) for the enamel groups were X=20.2 +/- 5.61, XL=23.6 +/- 4.92, S=20.8 +/- 4.55, SL=22.1 +/- 5.14 and for the dentin groups were X=14.1 +/- 7.51, XL=22.2 +/- 6.45, S=11.2 +/- 5.77, SL=15.9 +/- 3.61. For dentin, Xeno III self-etch adhesive showed significantly higher shear bond strength compared with Single Bond total-etch adhesive; Nd:YAG laser irradiation showed significantly higher shear bond strength compared with control (unlased).Conclusion: Nd:YAG laser application prior to photopolymerization of adhesive systems significantly increased the bond strength to dentin.
Resumo:
Analyze possible relationships between the bankruptcy and the family structure of informal micro-enterprises in Fortaleza city, Brazil. The analysis began with a research among micro-entrepreneurs who were beneficiaries of PROFITEC loans in bankruptcy and non-bankruptcy situation in 1997-1999 period. Evaluate whether the overlap of family and professional relationship inside the organizational structure of those micro-enterprises is a factor leading to bankruptcy. The comparative analysis divides the micro-enterprises into two groups: one that which had complied with the loan obligations (abiding firms) and another which had not (non-abiding firms). The analysis pointed out the familiar structure as having positive and negative influences over organizational work in both groups. The research also realized that those groups of family informal micro-enterprises do not recognize the professional problems related to the family, giving room for managerial conflicts related to the compliance, work time and use of profit. We cannot say that family structure of the informal microenterprises is the decisive cause for non-abidance, since there are also family firms which have the same disadvantages of both groups, but are complying with their obligations. The personal relationships in the informal family firms, however, define good practices and behaviors that definitely affect their operations.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objective: To evaluate the risk of development of musculoskeletal disorders in the upper limbs of undergraduate dentistry students during the execution of pre-clinical laboratory activities based on gender, type of dental procedure and area of the mouth under treatment.Methods: Male and female undergraduate students in the second year of the Araraquara Dental School, UNESP, were enrolled in this study. Digital photographs were obtained whilst the subjects performed laboratory activities. The working postures adopted by each student were evaluated using the Rapid Upper Limb Assessment (RULA). The photos were analysed by a calibrated researcher (k = 0.89), and a final risk score was attributed to each analysed procedure (n = 354). Descriptive statistical analyses were performed, and the associations of interest were analysed by the chisquare test (P = 0.05).Results: During most of the laboratory procedures performed, the risk of developing musculoskeletal disorders was high (64.7%; - IC95%: 59.7-69.7%), with no significant association between the RULA final score and gender (chi(2) = 1.100; P = 0.577), type of dental procedure (chi(2) = 5.447, P = 0.244) and mouth area treated (chi(2) = 4.150; P = 0.126).Conclusions: The risk of developing musculoskeletal disorders was high in undergraduate dentistry students; this risk was not related to gender, type of dental procedure and region of the mouth being treated.
Resumo:
Despite the importance of plant pathogens belonging to the Order Pucciniales (=Uredinales), popularly called rusts, certain peculiarities of its biology is poorly known, mainly due to the difficulty of growing them in culture media and also by the lack of appropriate methodologies for the development of research. Therefore, this study was to verify the efficiency of apparatus called germinatelia to obtain data about the basidiospores production biology of different Pucciniales species. Were used in the study Puccinia pampeana, P. psidii, P. pelargonii-zonalis, P. arachidis, P. mogiphanis, P. emiliae, P. hetereospora, P. malvacearum and P. cnici-oleracei. The use of germinatelia have revealed high basidiospores production for a period up to 5 months at temperatures between 12 degrees and 21 degrees C. Furthermore, in P. malvacearum was possible to record the germination by repetition (survival strategy) in 4.5% of basidiospores produced. All species were favored to mild temperatures. These results therefore demonstrate that the use of germinatelios is efficient, assisting in obtaining data about the biology and cycles of different Puccinia species, enabling better understanding of these pathogens, resulting in management and control measures most appropriate/accurate.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A Agricultura exerce papel fundamental na economia de um país, seja ela para emprego de mão de obra e geração de renda, seja para produção de alimentos destinados para a exportação e consumo interno. No Brasil a Agricultura familiar é responsável por produzir uma parcela importante de alimentos consumidos pela população nacional. Durante a década de 1990, políticas públicas foram sendo implantadas para auxiliar o desenvolvimento rural, tendo como público alvo a agricultura familiar e incidindo sobre entraves para o seu desenvolvimento, como a questão da comercialização dos produtos advindos desse segmento. Em 2003, O Programa de Aquisição de Alimentos (PAA), foi instituído pelo artigo 19 da lei federal 10.696, que tinha como objetivo promover a inclusão social e econômica no campo por meio do fortalecimento da agricultura familiar, através da aquisição de alimentos desses produtores. Tais alimentos adquiridos são destinados a ações de alimentação empreendidas por entidades das redes sócioassistenciais, Bancos de Alimentos e para famílias em situação de vulnerabilidade social. O presente trabalho consistiu em um estudo de caso, que teve como objetivo diagnosticar a influência do PAA no município de Rio Claro (SP), quantificando o número de agricultores que participavam do programa no município, e, identificando a diversidade e quantidade de alimentos produzidos destinados ao PAA. Foram também analisados os valores destinados ao programa desde sua implantação. Além disso, foram mapeadas as entidades sócio-assistenciais que receberam os alimentos destinados ao programa. Com base na leis de nº 10.696/2003 e nº 11.326/2006, e os Decretos de nº 6.447/2008 e nº 6.959/2009, que dão providências ao PAA, foram realizadas coletas de dados e informações junto às Secretarias de Ação Social e ao Banco de Alimentos do município de Rio Claro... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Ciências da Motricidade - IBRC
Resumo:
In 1954, it was celebrated the centenary of railways in Brazil. The date refers to the first section of 14.5 km of railway in Brazil (30/04/1854), in Rio de Janeiro, between Mauá and Fragoso, of the Petropolis Railway Company (Estrada de Ferro Petrópolis). Some of the texts and commemorative events indicated the symbolic values that the railroad took in the Brazilian history. Firstly, on 30.04.1954, the railway section Mauá-Fragoso and steam locomotive “Baroness” (the first used on the track) were declared national monuments(Decree No. 35,447-A, April 30, 1954). Secondly, some entities (Clube de Engenharia, Conselho Nacional de Geografia, Ministério da Viação e Obras Públicas) highlighted the importance of celebrating the Brazilian railway history and its historical significance, economic and geographical. For this, some events was occurred (the commemoration of one hundred years in Rio de Janeiro and Recife on 30.04.1954). Among the texts wrought produced, we highlight the text I Centenary of Brazilian Railroad (1954), released by the Brazilian Institute of Geography and Statistics (Instituto Brasileiro de Geografia e Estatística), and the National Council of Geography (Conselho Nacional de Geografia). The emphasis given to the railway refersto the geographical perspective (territorial expansion), but also makes mention of the Barãode Mauá, the founder of Petropolis Railway Company. We aim to understand the celebration from evocations about the Brazilian railroad history and some ideas that is assigned to the railway (and the Barãode Mauá), and railway heritage (the track and the locomotive “Baroneza”). On basis of this review will seek to understand how it was reconceived the railroad memory in view of these values and material elements.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)