Food intake of Macrobrachium rosenbergii during larval development

This work investigates the acceptance of different food types and sizes by Macrobrachium rosenbergii during each larval stage. Food intake of dry and wet formulated diets of four different size classes (250-425, 425-710, 710-1000 and 1000-1190 mum), as well as Artemia nauplii, was determined. Larvae of each zoeal stage were stocked in beakers and fed ad libitum. After 30-45 min, the digestive tract of each larva was observed under a stereomicroscope. Acceptance was evaluated by food intake frequency (FFI). There was no significant interaction (P<0.05) between inert diet size and FFI for each larval stage. Therefore, food intake during larval development is independent of food particle size. The ingestion of Artemia nauplii, was significantly higher by larvae between stages II and VI. Between stages VII and XI, FFI for Artemia nauplii and wet diet was similar, while the FFI of the dry diet was similar to live food between stages IX and XI. The wet diet was ingested by more than 50% of the larvae only from stage VII onwards, while the dry diet from stage VIII onwards. These results indicate that larvae could be fed Artemia nauplii only until stage VI. Diet supplementation should start from stage VII onwards, using food particles varying from 250 to 1190 mum. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Changes in biomass, chemical composition and nutritive value of Spartina alterniflora due to organic pollution in the Itanhaém River Basin (SP, Brazil)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Synonymy of the yeast genera Moniliella and Trichosporonoides and proposal of Moniliella fonsecae sp nov and five new species combinations

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Low glyphosate rates do not affect Citrus limonia (L.) Osbeck seedlings

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Hemogasometria e variáveis cardiopulmonares após administração do butorfanol em cães anestesiados pelo desfluorano sob ventilação espontânea

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chemically Assisted Enucleation Results in Higher G6PD Expression in Early Bovine Female Embryos Obtained by Somatic Cell Nuclear Transfer

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Somatotrophic and thyroid hormones around the onset of lay in broiler breeders under different conditions

Somatotrophic and thyroid hormones were determined around the onset of reproduction in broiler breeders reared in two different housing systems [dark, close-sided house (CH) and conventional, open-sided house (OH)]. In both groups age-related changes were obvious for thyroxine (T-4), growth hormone (GH) and insulin-like growth factor (IGF-1); levels of T-4 decreased, especially between 24 and 28 weeks in both groups; concomitantly GH sharply increased over the same period. A transient peak in triiodothyronine (T-3) occurred between 25 and 27 weeks. The effect of housing was only present after the onset of lay. Between weeks 27-28 and the end of the period studied, the CH group showed higher levels of GH and T-3 but lower T-4 levels as compared to the OH group. A significant increase in GH after onset of lay, without any significant rise in T-3 or in IGF-I, could point to a relative insensitivity to high plasma GH levels. Changes at GH receptor level, together with an increased pituitary GH secretion and/or decreased GH turnover may be expected. This may indicate that hypothalamo-pituitary changes at the onset of lay not only imply changes of gonadotrophic cell function, but also other hormonal axes. The relatively decrease in T-4 without changes in T-3, may point to a decrease in the activity of the thyrotropic axis.

Mating system of a population of Myracrodruon urundeuva F.F. & M.F. Allemão using the fAFLP molecular marker

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilização de modelos matemáticos para estimar a retenção de minerais em cabras durante a gestação

O trabalho foi realizado com o objetivo de estimar a retenção de elementos minerais durante a gestação de cabras com um ou dois fetos, utilizando-se diferentes modelos matemáticos. A estimativa de retenção foi baseada na diferença entre o total de cada mineral depositado no feto, útero, membranas, fluídos fetais e glândula mamária dos animais nas diferentes etapas da gestação e o total de cada mineral armazenado nas cabras vazias, utilizando-se os modelos de predição: ln Y = A - B e -C X ; Y = A e B X e ln Y = A + Bx + Cx², em que x = tempo de gestação. Comparando-se a estimativa com os valores reais obtidos, verificou-se que o modelo proposto ln = A+Bx+Cx², explicou com coerência e precisão o comportamento biológico da retenção de minerais durante todas as fases da gestação.

Efeito da interação genótipo × ambiente sobre o peso ao nascimento, aos 205 e aos 550 dias de idade de bovinos da raça Nelore na Região Sul do Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resistance of cattle of various genetic groups to the tick Rhipicephalus microplus and the relationship with coat traits

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Otimização do processo de recuperação do cromo de efluentes de curtumes por microemulsões no extrator Morris

The tanning industries are those which transform animal hide or skin into leather. Due to the complexity of the transformation process, greater quantities of chemicals are being used which results in the generation of effluents with residual solids. The chromium in the residual waters generated by tanning tend to be a serious problem to the environment, therefore the recovery of this metal could result in the reduction of manufacturing costs. This metal is usually found in a trivalent form which can be converted into a hexavalent compound under acidic conditions and in the presence of organic matter. The present study was carried out with the objective to recover chromium through an extraction/re-extraction process using micro emulsions. Micro emulsions are transparent and thermodynamically stable system composed of two immiscible liquids, one forming the continuous phase and the other dispersed into micro bubbles, established by an interfacial membrane formed by surface active and co-surface active molecules. The process of recovering the chromium was carried out in two stages. The first, an extraction process, where the chromium was extracted in the micro emulsion phase and the aqueous phase in excess was separated. In the second stage, a concentrated acid was added to the micro emulsion phase rich in chromium in order to obtain a Winsor II system, where the water that formed in the micro emulsion phase separates into a new micro emulsion phase with a higher concentration of chromium, due to the lowering of the hydrophiles as well as the ionisation of the system. During the experimental procedure, a study was initiated with a synthetic solution of chromium sulphate passing onto the effluent. A Morris extractor was used in the extraction process. Tests were carried out according to the plan and the results were analysed by statistical methods in order to optimise the main parameters that influence the process: the total rate of flow (Q), stirring speed (w) and solvent rate (r). The results, after optimization, demonstrated that the best percentuals in relation to the chromium extraction (99 %) were obtained in the following operational conditions: Q= 2,0 l/h, w= 425 rpm and r= 0,375. The re-extraction was carried out at room temperature (28 °C), 40 °C and 50°C using hydrochloric acid (8 and 10 M) and sulphuric acid (8 M) as re-extracting agents. The results obtained demonstrate that the process was efficient enough in relation to the chromium extraction, reaching to re-extraction percentage higher than 95 %.

Melatonin and its kynurenin-like oxidation products affect the microbicidal activity of neutrophils

Activated phagocytes oxidize the hormone melatonin to N-1-acethyl-N-2-formyl-5-methoxykynuramine (AFMK) in a superoxide anion- and myeloperoxidase-dependent reaction. We examined the effect of melatonin, AFMK and its deformylated-product N-acetyl-5-methoxykynuramine (AMK) on the phagocytosis, the microbicidal activity and the production of hypochlorous acid by neutrophils. Neither neutrophil and bacteria viability nor phagocytosis were affected by melatonin, AFMK or AMK. However these compounds affected the killing of Staphylococcus aureus. After 60 min of incubation, the percentage of viable bacteria inside the neutrophil increased to 76% in the presence of 1 mM of melatonin, 34% in the presence of AFMK and 73% in the presence of AMK. The sole inhibition of HOCl formation, expected in the presence of myeloperoxidase substrates, was not sufficient to explain the inhibition of the killing activity. Melatonin caused an almost complete inhibition of HOCl formation at concentrations of up to 0.05 mM. Although less effective, AMK also inhibited the formation of HOCl However, AFMK had no effect on the production of HOCl These findings corroborate the present view that the killing activity of neutrophils is a complex phenomenon, which involves more than just the production of reactive oxygen species. Furthermore, the action of melatonin and its oxidation products include additional activities beyond their antioxidant property. The impairment of the neutrophils' microbicidal activity caused by melatonin and its oxidation products may have important clinical implications, especially in those cases in which melatonin is pharmacologically administered in patients with infections. (c) 2005 Elsevier SAS. All rights reserved.

Serotonin as a physiological substrate for myeloperoxidase and its superoxide-dependent oxidation to cytotoxic tryptamine-4,5-dione

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Binary integer programming formulations for scheduling in market-driven foundries

This paper describes the development and solution of binary integer formulations for production scheduling problems in market-driven foundries. This industrial sector is comprised of small and mid-sized companies with little or no automation, working with diversified production, involving several different metal alloy specifications in small tailor-made product lots. The characteristics and constraints involved in a typical production environment at these industries challenge the formulation of mathematical programming models that can be computationally solved when considering real applications. However, despite the interest on the part of these industries in counting on effective methods for production scheduling, there are few studies available on the subject. The computational tests prove the robustness and feasibility of proposed models in situations analogous to those found in production scheduling at the analyzed industrial sector. (C) 2010 Elsevier Ltd. All rights reserved.