Influência da altura da coroa em implantes osseointegrados: estudo pelo método dos elementos finitos tridimensionais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do nível de inserção óssea do dente suporte em prótese parcial removível mandibular classe I associada a implante osseointegrado: análise pelo método dos elementos finitos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo do desajuste angular e vertical em próteses fixas implantossuportadas por meio do MEF-3D

Pós-graduação em Odontologia - FOA

Comparação do alongamento estático, balístico e contrair-relaxar nos músculos isquiotibiais

This study aimed to compare the effect of three stretching techniques (ballistic, static and contract-relax) on instant gain muscle flexibility on the hamstring muscle. We evaluated 23 subjects of both gender [means (SD) age 21.17 (1.4) years]. All volunteers performed static, ballistic and contract-relax stretching. Each technique was performed in a single session with an interval of seven days between sessions. To assess the immediate effects of the different techniques were performed two tests of flexibility, Sit and Reach Test and the Popliteal Angle Test. In comparison with the baseline there were significant increase in muscle flexibility in the Popliteal Angle Test after application ballistic (6.26%) and contract-relax technique (6.5%) respectively (p<0.05). When comparing the three techniques regarding the change score significant difference was found in the the Popliteal Angle Test for ballistic and contract-relax stretching, but Sit and Reach Test showed no significance difference. These data suggest that the ballistic and contract-relax were better than the technique of static stretching and both are equally effective. The ballistic contract-relax stretching techniques improved gain of muscle flexibility on the hamstring muscle.

Análise quantitativa da deglutição orofaríngea em indivíduo gastrostomizado com Lipofuscinose Ceróide Neuronal: relato de caso

The presence of oropharyngeal dysphagia in the pediatric population with genetic diseases it is still poorly studied. The aim of this study was to analyze the oral total transit time and pharyngeal transit time, in an individual with neuronal ceroid lipofucinosis (NCL) with severe oropharyngeal dysphagia. Individual with NCL, 3 years old, 2 years with gastrostomy and no oral feeding, weighting loss, but without pulmonary complications. Oropharyngeal swallowing was studied by videofluoroscopy and it was realized a quantitative analysis using software. Changes were observed throughout the whole biomechanics of swallowing. The quantitative analysis of total oral transit time was found 45.37 seconds (default normality in children is 4 seconds) and for pharyngeal transit time was 4.53 seconds. It was found that beside the changes in the biomechanics of oropharyngeal swallowing in the case studied, an increase in total oral transit time and pharyngeal transit time was also observed, which can significantly compromise the nutritional status and pulmonary these individuals.

Revisão sistemática do efeito do envelhecimento no andar livre e adaptativo

Aging seems to impair the walking. However, it is not clear the effects of aging on walking. The aim of this study was to determine changes in kinematic, kinetic and electromyographic parameters of the free and adaptive gait, in preferred velocity, caused by aging. The initial search strategy was performed to identify all articles that examined the free and adaptive gait. The electronic databases analyzed were: MEDLINE, PubMed, EMBASE, CINAHL, Sports Discus, DARE, PsychInfo, ERIC, AusportMed, AMI, Cochrane and PEDro. Twenty-three articles were reviewed in full. Elderly are slower, with shorter step length and longer double support duration than young adults during free and adaptive gait. Even, they showed higher muscular demands, with redistribution of joint power and torque and decreased force in the propulsion and absorption phases. It was concluded that elderly present altered kinematic, kinetic and electromyographic parameters of free and adaptive gait compared to young adults.

Análise comparativa da atividade muscular do flexor superficial dos dedos e força de preensão palmar em atividades laborativas de uma indústria

Pós-graduação em Engenharia Mecânica - FEG

Análise de equilíbrio corporal submetido á esforços de aceleração e desaceleração na direção antero-posterior: estudo transversal

Pós-graduação em Engenharia Mecânica - FEG

Photoelastic Analysis of Stress Distribution With Different Implant Systems

The aim of this study was to evaluate stress distribution with different implant systems through photoelasticity. Five models were fabricated with photoelastic resin PL-2. Each model was composed of a block of photoelastic resin (10 x 40 x 45 mm) with an implant and a healing abutment: model 1, internal hexagon implant (4.0 X 10 mm; Conect AR, Conexao, Sao Paulo, Brazil); model 2, Morse taper/internal octagon implant (4.1 x 10 mm; Standard, Straumann ITI, Andover, Mass); model 3, Morse taper implant (4.0 x 10 mm; AR Morse, Conexao); model 4, locking taper implant (4.0 x 11 mm; Bicon, Boston, Mass); model 5, external hexagon implant (4.0 x 10 mm; Master Screw, Conexao). Axial and oblique load (45) of 150 N were applied by a universal testing machine (EMIC-DL 3000), and a circular polariscope was used to visualize the stress. The results were photographed and analyzed qualitatively using Adobe Photoshop software. For the axial load, the greatest stress concentration was exhibited in the cervical and apical thirds. However, the highest number of isochromatic fringes was observed in the implant apex and in the cervical adjacent to the load direction in all models for the oblique load. Model 2 (Morse taper, internal octagon, Straumann ITI) presented the lowest stress concentration, while model 5 (external hexagon, Master Screw, Conexao) exhibited the greatest stress. It was concluded that Morse taper implants presented a more favorable stress distribution among the test groups. The external hexagon implant showed the highest stress concentration. Oblique load generated the highest stress in all models analyzed.

Effect of Abutment Screw Surface Treatment on Reliability of Implant-Supported Crowns

Purpose: To evaluate and compare the reliability of implant-supported single crowns cemented onto abutments retained with coated (C) or noncoated (NC) screws and onto platform-switched abutments with coated screws. Materials and Methods: Fifty-four implants (DT Implant 4-mm Standard Platform, Intra-Lock International) were divided into three groups (n = 18 each) as follows: matching-platform abutments secured with noncoated abutment screws (MNC); matching-platform abutments tightened with coated abutment screws (MC); and switched-platform abutments secured with coated abutment screws (SC). Screws were characterized by scanning electron microscopy and x-ray photoelectron spectroscopy (XPS). The specimens were subjected to step-stress accelerated life testing. Use-level probability Weibull curves and reliability for 100,000 cycles at 200 N and 300 N (90% two-sided confidence intervals) were calculated. Polarized light and scanning electron microscopes were used for fractographic analysis. Results: Scanning electron microscopy revealed differences in surface texture; noncoated screws presented the typical machining grooves texture, whereas coated screws presented a plastically deformed surface layer. XPS revealed the same base components for both screws, with the exception of higher degrees of silicon in the SiO2 form for the coated samples. For 100,000 cycles at 300 N, reliability values were 0.06 (0.01 to 0.16), 0.25 (0.09 to 0.45), and 0.25 (0.08 to 0.45), for MNC, MC, and SC, respectively. The most common failure mechanism for MNC was fracture of the abutment screw, followed by bending, or its fracture, along with fracture of the abutment or implant. Coated abutment screws most commonly fractured along with the abutment, irrespective of abutment type. Conclusion: Reliability was higher for both groups with the coated screw than with the uncoated screw. Failure modes differed between coated and uncoated groups.

Influence of Tapered and External Hexagon Connections on Bone Stresses Around Tilted Dental Implants: Three-Dimensional Finite Element Method With Statistical Analysis

Background: The purpose of this study is to analyze the tension distribution on bone tissue around implants with different angulations (0 degrees, 17 degrees, and 30 degrees) and connections (external hexagon and tapered) through the use of three-dimensional finite element and statistical analyses.Methods: Twelve different configurations of three-dimensional finite element models, including three inclinations of the implants (0 degrees, 17 degrees, and 30 degrees), two connections (an external hexagon and a tapered), and two load applications (axial and oblique), were simulated. The maximum principal stress values for cortical bone were measured at the mesial, distal, buccal, and lingual regions around the implant for each analyzed situation, totaling 48 groups. Loads of 200 and 100 N were applied at the occlusal surface in the axial and oblique directions, respectively. Maximum principal stress values were measured at the bone crest and statistically analyzed using analysis of variance. Stress patterns in the bone tissue around the implant were analyzed qualitatively.Results: The results demonstrated that under the oblique loading process, the external hexagon connection showed significantly higher stress concentrations in the bone tissue (P < 0.05) compared with the tapered connection. Moreover, the buccal and mesial regions of the cortical bone concentrated significantly higher stress (P < 0.005) to the external hexagon implant type. Under the oblique loading direction, the increased external hexagon implant angulation induced a significantly higher stress concentration (P = 0.045).Conclusions: The study results show that: 1) the oblique load was more damaging to bone tissue, mainly when associated with external hexagon implants; and 2) there was a higher stress concentration on the buccal region in comparison to all other regions under oblique load.

Non-linear 3D finite element analysis of full-arch implant-supported fixed dentures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Flexible feeding kinematics of a tropical carnivorous anuran tadpole

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Do people with recurrent back pain constrain spinal motion during seated horizontal and downward reaching?

Background: Although the effect of symptomatic back pain on functional movement has been investigated, changes to spinal movement patterns in essentially pain-free people with a history of recurrent back pain are largely unreported. Reaching activities, important for everyday and occupational function, often present problems to such people, but have not been considered in this population. The purpose of this study was to compare the amplitude and timing of spinal and hip motions during two, seated reaching activities in people with and without a history of recurrent low back pain (RLBP).Methods: Spinal and hip motions during reaching downward and across the body, in both directions, were tracked using electromagnetic sensors. Analyses were conducted to explore the amplitudes, velocities and timings of 3D segmental movements and to compare controls with subjects with recurrent, but asymptomatic lumbar or lumbosacral pain.Findings: We detected significant differences in the amplitude and timing of movement in the lower thoracic region, with the RLBP group restricting movement and demonstrating compensatory increased motion at the hip. The lumbar region displayed no significant between-group differences. The order in which the spinal segments achieved peak velocity in cross-reaching was reversed in RLBP compared to controls, with lumbar motion leading in controls and lagging in RLBP.Interpretation: Subjects with a history of RLBP show a number of altered kinematic features during reaching activities which are not related to the presence or intensity of pain, but which suggest adaptive changes to movement control. (C) 2013 Elsevier Ltd. All rights reserved.

Clinical, biomechanical and histological study on oophorectomy induced menopause

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)