Synthesis of poly(phenylenesulfidephenylenamine) by self-polycondensation of methyl-(4-anilinophenyl) sulfide with antimony pentachloride

Poly(phenylenesulfidephenylenamine)(PPSA) an alternating copolymer and the hybrid structure of poly(phenylene sulfide)(PPS) and polyaniline(PAn), was synthesized by self-polycondensation of methyl-(4-anilino-phenyl) sulfide with antimony pentachloride and by the acid-induced self-polycondensation of methyl-(4-anilino-phenyl) sulfoxide.

Half-sandwich cyclopentandienyl molybdenum and tungsten nitrosyl complexes containing bidentate sulfur ligands

Half-sandwich nitrosyl complexes Cp*M(NO)I-2 (M = Mo, or W) react with dithiocarbamates (NaS2CNMe2 and NaS2CNEt2) in THF to form of complexes: Cp*Mo(NO)I (S2CNMe2) (1), Cp*Mo(NO)I(S2CNEt2) (2), Cp*W(NO)I(S2CNMe2) (3) and Cp*W(NO)I(S2CNEt2) (4) in high yields. Treatments of Cp*M(NO)I-2 (M = Mo, W) or [CpMo(NO)I-2](2) with phosphinodithioate (NaS2PMe2) and phosphorodithioate [(NH4)S2P(OMe)(2)] result in complexes: Cp*Mo(NO)I(S2PMe2) (5a), CpMo(NO)I (S2PMe2) (5b), Cp*Mo(NO)(S2PMe2)(2) (6a), CpMo (NO) (S2PMe2)(2) (6b) and Cp*Mo(NO)I[S2P(OMe)(2)] (7), Cp*W(NO)I(S2PMe2) (8), Cp*W(NO) I[S2P(OMe)](2) (9). Treatment of (5a) and (5b) with an excess of NaS2PMe2 gives (6a) and (6b). The complexes have been characterized by their elemental analyses, i.r., H-1, C-13-n.m.r. and by EI-MS spectrometry.

Optical properties of organo-soluble polyimide thin films and their applications in liquid crystal displays

Three organo-soluble polyimide powders have been synthesized. Their imidization was verified by Fourier transform infrared (FTIR) and thermal gravimetric analysis (TGA) techniques. The amorphous morphology of their thin films were confirmed by X-ray diffraction. Polyimide thin films were prepared by solution casting or spin coating. UV-visible transmission spectra of thin films revealed that they are almost transparent in the range of visible light. With in-plane orientation, revealed by FTIR spectra, negative birefringence (Delta n) of thin films were observed, and refractive indices of the thin films along the film plane (n(TE)) and normal to the plane (n(TM)) were measured by a prism coupler. Because of negative birefringence of the thin films, they tan be substituted for the compensation films for twisted nematic liquid crystal displays (TN-LCDs) to extend their viewing angles. In this paper, a 90 degrees C TN-LCD and 120 degrees C TN-LCD were taken as examples to show the compensation effect of thin films of a qualified polyimide. (C) 1998 Elsevier Science S.A. All rights reserved.

电感耦合等离子体原子发射光谱分析信息系统的开发 Ⅰ.系统分析

根据电感耦合等离子体原子发射光谱(ICP-AES)分析的实际需要，开发了一种ICP-AES分析信息系统。该系统包括谱线管理系统、识别干扰程度系统、校准及干扰校正系 统、帮助系统等子系统。本文将讨论系统分析。系统设计和系统评价将在另文中讨论。

Luminescence and energy transfer phenomena of several rare earth ions in the CaAl2B2O7

The luminescence properties of Ce3+, Gd3+, and Tb3+ have been investigated in the compound CaAl2B2O7. The single excitation band peaking at about 320 nm and single emission band peaking at about 384 nm for Ce3+, without the characteristic doublet, are attributed to the extensive crystal-field splitting of 4f ground state. The emission of Gd3+ consists of well-known sharp lines and two weak bands around 319.5 and 325 nm. These bands are due to the coupling of Gd3+ with BO33- groups. The green emission of Tb3+ is considerably sensitized by Ce3+. Energy transfer from Ce3+ to Tb3+ in CaAl2B2O7 is efficient. (C) 1997 Elsevier Science Ltd.

光折变Ce∶Nd∶LiNbO3晶体用于实时光学图象处理

Ｃｅ：Ｎｄ：ＬｉＮｂＯ３晶体具有优良的光折变性能，它作为全息记录介质，用于实现了光学图象微分和全息关联存储。

热致液晶（LC70）／PET共混物的结构与性能

采用ＷＡＸＤ、ＤＳＣ、ＰＯＭ、ＳＥＭ和力学测试方法研究了ＬＣ７０／ＰＥＴ原位复合材料的结构与性能。结果表明，当ＬＣ７０／ＰＥＴ＜２０％时，ＬＣ７０对ＰＥＴ的结晶生长具有一定促进作用；当ＬＣ７０／ＰＥＴ＞３０％时，共混物结晶能力迅速下降，结晶放热和熔融焓明显降低。ＬＣ７０可起到加速成核作用。ＬＣ７０与ＰＥＴ部分相容，在较高ＬＣ７０含量下的ＳＥＭ观察表明，存在清晰的“皮－芯”结构。

CALCULATION METHOD OF LATTICE ENERGY ON COMPLEX-CRYSTALS

In this paper, based on the consideration of covalent behavior of adjacent ions in crystals, a calculation formula of lattice energy was proposed. In which, the concept of ionic effective valence and the empirical formula covalent energy were introduced,

复杂晶体点阵能的计算方法

我们在考虑了晶体中近邻正、负离子的共价行为的基础上,提出了晶体点阵能的计算公式,并引进了离子有效价态的概念和共价能计算的经验表达式,把二元离子晶体点阵能的计算推广到一般极性共价晶体和其他复杂晶体,计算结果与实验结果符合得很好.

克山病心肌元素的研究

克山病是一种以心肌坏死为主的地方性心肌病,病因尚不清楚。本项研究由云南、西藏、吉林三个省(区)共采集克山病患者心肌19例(其中慢型克山病7例,亚急型克山病12例),非克山病的其他疚病患者心肌5例,同时还由吉林省非克山病区采集急死的健康人心肌43例做对照,完成了直接对克山病的主要受累靶组织-心肌19种元素含量的对照研究。此外,还通过三批动物实验(共用动物320只)对心肌元素及其代谢特点、心肌

PEK-C/PPS共混体系的相容性和结晶行为

结晶-非晶高聚物共混体系的相容性和结晶行为的研究已有许多报道。本工作研究了含酞侧基聚芳醚酮(PEK-C)与聚苯硫醚(PPS)共混物的相容性和结晶行为。 PEK-C为徐州工程塑料厂产品,未作封端处理,η?p/c=0.70;PPS为日本东丽产品。两者用双螺杆挤出机在320～350℃制成共混物。仪器为Perkin-Elmer DSC-7型差示扫描量热仪,升温速率10℃/min;DDV-Ⅱ-EA型全自动动态粘弹谱仪和理学D/max-ⅡBX-射线衍射仪。

酞侧基聚芳醚砜和聚芳醚酮的相容性

本文报道注射级酞侧基聚芳醚砜(PES-C)和聚芳醚酮(PEK-C)共混试样的玻璃化转变行为和部分力学性能的研究结果。并讨论共混工艺对相容性的影响。 PES-C和PEK-C树脂均由中国科学院长春应用化学研究所徐州工程塑料厂合成,在三氯甲烷中的比浓粘度ηsp/c(20℃)分别为0.45和0.47。将粉状树脂在GH-100Q高速搅拌器内按配方混合,并在烘箱内干燥后,用SHJ-30双螺杆挤出机在320～350℃(物料温度)挤出造粒。

常规二脉冲叠加四阶跃微分伏安法

常用的脉冲技术,如阶梯伏安法、微分脉冲伏安法、方波伏安法等,都是利用电容电流的衰减比法拉第电流快得多的特点,通过延时,在脉冲后期采样.其共同缺点是损失一部分法拉第电流,而且由于延时,扫描速率也很难提高.本文首次提出一种新型常规二脉冲叠加的四阶跃伏安法,在每个脉冲周期中,电位都回到初始电位,通过在4个相互反对称电位阶跃上采样电流的差分和叠加组合,使正反向脉冲引起的电容电流相互抵消,不需要通过较长的延时而牺牲法拉第电流,从而可提高扫描速率和灵敏度.这种新的脉冲扫描技术同时具有常规脉冲和微分脉冲伏安法的特点,灵敏度和扫描速率均优于微分脉冲伏安法,并适合于吸附体系和固体电极的研究.

新型分离富集剂对重金属离子吸附能力的研究

本文从静态和动态两个方面探讨了各种实验条件对新型分离富集剂吸附能力的影响。结果表明:在静态条件下,Cd~(2+)和Zn~(2+)的吸附平衡时间为1h,Pb~(2+)和Cu~(2+)为1.5h;富集剂对上述几种离子的吸附速度的顺序是:Pb~(2+)>Cu~(2+)>Zn~(2+)>Cd~(2+);当[Mg~(2+)]<200mg/L,[Ca~(2+)<400mg/L,[K~+]<350mg/L时,此三种金属离子不会干扰对Cu~(2+)的吸附。对于动态吸附,当吸附剂用量为0.1g(对Hg~(2+)),或0.15g(对Cu~(2+)),pH为0.3—8(对Hg~(2+)),3～8(对Cu~(2+))及流速>7mL/min(对Hg~(2+)),或≤10mL/min(对Cu~(2+))时,本富集剂可完全吸附上述两种物质。另外,此富集剂的饱和吸附量为巯基棉的3—20倍,具有很高的吸附能力和很好的稳定性。