The rheology of flotation froths

A literature review has highlighted the need to measure flotation froth rheology in order to fully characterise the role of the froth in the flotation process. The initial investigation using a coaxial cylinder viscometer for froth rheology measurement led to the development of a new device employing a vane measuring head. The modified rheometer was used in industrial scale flotation tests at Mt. Isa Copper Concentrator. The measured froth rheograms show a non-Newtonian nature for the flotation froths (pseudoplastic flow). The evidence of the non-Newtonian flow has questioned the validity of application of the Laplace equation in froth motion modelling as used by a number of researchers, since the assumption of irrotational flow is violated. Correlations between the froth rheology and the froth retention time, water hold-up in the froth and concentrate grades have been found. These correlations are independent of air flow rate (test data at various air flow rates fall on one similar trend line). This implies that froth rheology may be used as a lumped parameter for other operating variables in flotation modelling and scale up. (C) 2003 Elsevier Science B.V. All rights reserved.

A mathematical model of concentrate solids content for the wet drum magnetic separator

Low concentrate density from wet drum magnetic separators in dense medium circuits can cause operating difficulties due to inability to obtain the required circulating medium density and, indirectly, high medium solids losses. The literature is almost silent on the processes controlling concentrate density. However, the common name for the region through which concentrate is discharged-the squeeze pan gap-implies that some extrusion process is thought to be at work. There is no model of magnetics recovery in a wet drum magnetic separator, which includes as inputs all significant machine and operating variables. A series of trials, in both factorial experiments and in single variable experiments, was done using a purpose built rig which featured a small industrial scale (700 mm lip length, 900 turn diameter) wet drum magnetic separator. A substantial data set of 191 trials was generated in this work. The results of the factorial experiments were used to identify the variables having a significant effect on magnetics recovery. It is proposed, based both on the experimental observations of the present work and on observations reported in the literature, that the process controlling magnetic separator concentrate density is one of drainage. Such a process should be able to be defined by an initial moisture, a drainage rate and a drainage time, the latter being defined by the volumetric flowrate and the volume within the drainage zone. The magnetics can be characterised by an experimentally derived ultimate drainage moisture. A model based on these concepts and containing adjustable parameters was developed. This model was then fitted to a randomly chosen 80% of the data, and validated by application to the remaining 20%. The model is shown to be a good fit to data over concentrate solids content values from 40% solids to 80% solids and for both magnetite and ferrosilicon feeds. (C) 2003 Elsevier Science B.V. All rights reserved.

A mathematical model of recovery of dense medium magnetics in the wet drum magnetic separator

Loss of magnetic medium solids from dense medium circuits is a substantial contributor to operating cost. Much of this loss is by way of wet drum magnetic separator effluent. A model of the separator would be useful for process design, optimisation and control. A review of the literature established that although various rules of thumb exist, largely based on empirical or anecdotal evidence, there is no model of magnetics recovery in a wet drum magnetic separator which includes as inputs all significant machine and operating variables. A series of trials, in both factorial experiments and in single variable experiments, was therefore carried out using a purpose built rig which featured a small industrial scale (700 mm lip length, 900 mm diameter) wet drum magnetic separator. A substantial data set of 191 trials was generated in the work. The results of the factorial experiments were used to identify the variables having a significant effect on magnetics recovery. Observations carried out as an adjunct to this work, as well as magnetic theory, suggests that the capture of magnetic particles in the wet drum magnetic separator is by a flocculation process. Such a process should be defined by a flocculation rate and a flocculation time; the latter being defined by the volumetric flowrate and the volume within the separation zone. A model based on this concept and containing adjustable parameters was developed. This model was then fitted to a randomly chosen 80% of the data, and validated by application to the remaining 20%. The model is shown to provide a satisfactory fit to the data over three orders of magnitude of magnetics loss. (C) 2003 Elsevier Science BY. All rights reserved.

Tissue engineering for bone regeneration using differentiated alveolar bone cells in collagen scaffolds

Regeneration of osseous defects by a tissue-engineering approach provides a novel means of treatment utilizing cell biology, materials science, and molecular biology. In this study the concept of tissue engineering was tested with collagen type I matrices seeded with cells with osteogenic potential and implanted into sites where osseous damage had occurred. Explant cultures of cells from human alveolar bone and gingiva were established. When seeded into a three-dimensional type I collagen-based scaffold, the bone-derived cells maintained their osteoblastic phenotype as monitored by mRNA and protein levels of the bone-related proteins including bone sialoprotein, osteocalcin, osteopontin, bone morphogenetic proteins 2 and 4, and alkaline phosphatase. These in vitro-developed matrices were implanted into critical-size bone defects in skulls of immunodeficient (SCID) mice. Wound healing was monitored for up to 4 weeks. When measured by microdensitometry the bone density within defects filled with osteoblast-derived matrix was significantly higher compared with defects filled with either collagen scaffold alone or collagen scaffold impregnated with gingival fibroblasts. New bone formation was found at all the sites treated with the osteoblast-derived matrix at 28 days, whereas no obvious new bone formation was identified at the same time point in the control groups. In situ hybridization for the human-specific Alu gene sequence indicated that the newly formed bone tissue resulted from both transplanted human osteoblasts and endogenous mesenchymal stem cells. The results indicate that cells derived from human alveolar bone can be incorporated into bioengineered scaffolds and synthesize a matrix, which on implantation can induce new bone formation.

An energy-based model for swing hammer mills

An energy-based swing hammer mill model has been developed for coke oven feed preparation. it comprises a mechanistic power model to determine the dynamic internal recirculation and a perfect mixing mill model with a dual-classification function to mimic the operations of crusher and screen. The model parameters were calibrated using a pilot-scale swing hammer mill at various operating conditions. The effects of the underscreen configurations and the feed sizes on hammer mill operations were demonstrated through the fitted model parameters. Relationships between the model parameters and the machine configurations were established. The model was validated using the independent experimental data of single lithotype coal tests with the same BJD pilot-scale hammer mill and full operation audit data of an industrial hammer mill. The outcome of the energy-based swing hammer mill model is the capability to simulate the impact of changing blends of coal or mill configurations and operating conditions on product size distribution. Alternatively, the model can be used to select the machine settings required to achieve a desired product. (C) 2003 Elsevier Science B.V. All rights reserved.

Comments on "Maintenance policies with two-dimensional warranty"

Chen and Popova [Res. Engng Syst. Saf. 77 (2002) 61] discuss maintenance policies for items sold with a two-dimensional warranty. However, their paper fails to give a proper review of the literature and it also contains errors. In this note we first review the relevant literature and then comment on the errors in their analysis. (C) 2003 Elsevier Ltd. All rights reserved.

The tree cut and merge algorithm for estimation of network reliability

This article presents Monte Carlo techniques for estimating network reliability. For highly reliable networks, techniques based on graph evolution models provide very good performance. However, they are known to have significant simulation cost. An existing hybrid scheme (based on partitioning the time space) is available to speed up the simulations; however, there are difficulties with optimizing the important parameter associated with this scheme. To overcome these difficulties, a new hybrid scheme (based on partitioning the edge set) is proposed in this article. The proposed scheme shows orders of magnitude improvement of performance over the existing techniques in certain classes of network. It also provides reliability bounds with little overhead.

A new wavelet-based adaptive method for solving population balance equations

A new wavelet-based adaptive framework for solving population balance equations (PBEs) is proposed in this work. The technique is general, powerful and efficient without the need for prior assumptions about the characteristics of the processes. Because there are steeply varying number densities across a size range, a new strategy is developed to select the optimal order of resolution and the collocation points based on an interpolating wavelet transform (IWT). The proposed technique has been tested for size-independent agglomeration, agglomeration with a linear summation kernel and agglomeration with a nonlinear kernel. In all cases, the predicted and analytical particle size distributions (PSDs) are in excellent agreement. Further work on the solution of the general population balance equations with nucleation, growth and agglomeration and the solution of steady-state population balance equations will be presented in this framework. (C) 2002 Elsevier Science B.V. All rights reserved.

Caf?? com debate: os novos instrumentos da pol??tica industrial e tecnol??gica

A apresenta????o abordas os temas do desenvolvimento industrial e tecnol??gico brasileiro, bem como sua competitividade comercial no exterior

Colet??nea de pol??ticas p??blicas: volume 2: a pol??tica industrial no Brasil, 1985-1992: pol??ticos, burocratas e interesses organizados no processo de policy-making

O principal objetivo deste livro ?? constituir uma fonte de pesquisa para o estudo do processo de produ????o e implementa????o de pol??ticas p??blicas. Por meio de textos selecionados, analisa-se o pr??prio conceito de pol??ticas p??blicas, discute-se as defini????es utilizadas para distinguir suas diversas fases e apresenta-se algumas das principais correntes te??ricas de an??lise sobre o processo de pol??ticas p??blicas.

Indicadores de Ciência, Tecnologia & Inovação : análise da produção científica e tecnológica da área de conhecimento em Engenharia Civil na Base de Dados da Web of Science

Esta dissertação trata da análise da produção científica e tecnológica internacional e brasileira na área de conhecimento Engenharia Civil, por meio de indicadores bibliométricos. A área Engenharia Civil foi escolhida em razão da sua relevância para o desenvolvimento econômico do país. No entanto, em termos absolutos e relativos, está entre os setores tecnologicamente mais atrasados da economia. A bibliometria é uma disciplina com alcance multidisciplinar que estuda o uso e os aspectos quantitativos da produção científica registrada. Os indicadores de produção científica são objeto de análise de várias áreas do conhecimento, tanto para o planejamento e a execução de políticas públicas de vários setores quanto para maior conhecimento da comunidade científica sobre o sistema em que está inserida. A metodologia utilizada para a elaboração deste estudo descritivo de caráter exploratório foi a análise documental e bibliométrica, baseada em dados das publicações científicas, no período de 1970 a 2012, e tecnológicas, no período de 2001 a 2012, da área Engenharia Civil, indexadas nas bases de dados Science Citattion Index Expanded (SCI); Social Science Citation Index (SSCI); Conference Proceedings Citation Index (CPCI) e da Derwent Innovations Index (DII), que compõem a base de dados multidisciplinar da Web of Sicence (WoS). As informações foram qualificadas e quantificadas com o auxílio do software bibliométrico VantagePoint®. Os resultados obtidos confirmaram o baixo número de publicações científicas e tecnológicas na área de conhecimento Engenharia Civil de autores filiados a instituições de ensino e pesquisa brasileiras quando comparados aos dos países industrializados. Existe um conjunto de fortes condicionantes que ultrapassam o poder de decisão e de influência da academia, dificultando e limitando a disseminação das pesquisas e patentes brasileiras relacionadas a fatores de caráter sistêmico e cultural. A possibilidade de análise de indicadores de produção científica e tecnológica na Engenharia Civil contribui para criar políticas que, se utilizadas por agências de fomento, podem subsidiar investimentos mais fundamentados por parte dos governos e da iniciativa privada, a exemplo do que é feito por outros setores industriais.

O discurso e a ação : análise do processo de mudança no sistema de controle gerencial em uma organização industrial brasileira sob a ótica da teoria institucional

O objetivo desse estudo foi investigar o processo de mudança no sistema de controle gerencial (SCG), analisando a alteração das práticas de controle gerencial na estrutura desse sistema, sob a ótica da teoria institucional. A questão de pesquisa é: como ocorre o processo de mudança no SCG em uma organização industrial brasileira? Para tanto, optou-se por uma abordagem qualitativa do tipo descritiva, num estudo de caso único, utilizando como métodos de coleta de dados entrevistas individuais não estruturadas e semiestruturadas com 11 gestores e usuários do SCG, observação não participante e levantamento documental. A coleta dos dados ocorreu entre agosto/2014 e março/2015. Como método de análise e interpretação de dados foram utilizados elementos da análise do discurso (AD). Os principais referenciais teóricos foram os trabalhos de Meyer e Rowan (1977), Dimaggio e Powel (1983, 1991, 2007), Scott (1995, 2008a, 2008b) e Machado-da- Silva e Vizeu (2007) sobre a teoria institucional; Huy (2001), Beekman, Chenhall e Euske (2007) e Machado-da-Silva, Fonseca e Crubellate (2010) referente ao processo de mudança; e Malmi e Brown (2008) e Simons (1995) referente ao SCG; destacando a aplicação empírica dos modelos teóricos de Malmi e Brown (2008), Simons (1995) e Huy (2001). Na análise dos dados, foi identificado o desenho e o uso do SCG, relatando como está transcorrendo a alteração de suas práticas de controle gerencial, identificando os fatores de estímulo e resistência à institucionalização dessas práticas e quais os atores organizacionais que estão atuando como agentes da mudança. Por fim, foram identificados os aspectos discursivos recorrentes que permeiam o discurso da empresa pesquisada, alinhados ao processo de mudança no SCG. Como contribuições, foi demonstrada a influência dos fatores isomórficos na escolha das práticas de controle gerencial, a evidência de que o SCG é socialmente construído, as implicações da centralização do poder e da ausência de estratégias para o SCG, evidências de que o processo de mudança no SCG não é meramente mecânico ou automatizado e ainda, que o discurso da mudança pode permear a organização sem que a ação seja concretizada, revelando um descompasso entre o discurso e a ação

Electrospun silk-elastin-like fiber mats for tissue engineering applications

Protein-based polymers are present in a wide variety of organisms fulfilling structural and mechanical roles. Advances in protein engineering and recombinant DNA technology allow the design and production of recombinant protein-based polymers (rPBPs) with an absolute control of its composition. Although the application of recombinant proteins as biomaterials is still an emerging technology, the possibilities are limitless and far superior to natural or synthetic materials, as the complexity of the structural design can be fully customized. In this work, we report the electrospinning of two new genetically engineered silk-elastin-like proteins (SELPs) consisting of alternate silk- and elastin-like blocks. Electrospinning was performed with formic acid and aqueous solutions at different concentrations without addition of further agents. The size and morphology of the electrospun structures was characterized by scanning electron microscopy showing to be dependent of concentration and solvent used. Treatment with air saturated with methanol was employed to stabilize the structure and promote water insolubility through a time-dependent conversion of random coils into β-sheets (FTIR). The resultant methanol-treated electrospun mats were characterized for swelling degree (570-720%), water vapour transmission rate (1083 g/m2/day) and mechanical properties (modulus of elasticity of ~126 MPa). Furthermore, the methanol-treated SELP fiber mats showed no cytotoxicity and were able to support adhesion and proliferation of normal human skin fibroblasts. Adhesion was characterized by a filopodia-mediated mechanism. These results demonstrate that SELP fiber mats can provide promising solutions for the development of novel biomaterials suitable for tissue engineering applications.