Analysis of surfaces for characterization of fungal burden: does it matter?

Objectives: Mycological contamination of occupational environments can be a result of fungal spores’ dispersion in the air and on surfaces. Therefore, it is very important to assess it in both types of the samples. In the present study we assessed fungal contamination in the air and in the surface samples to show relevance of surfaces sampling in complementing the results obtained in the air samples. Material and Methods: In total, 42 settings were assessed by the analysis of air and surfaces samples. The settings were divided into settings with a high fungal load (7 poultry farms and 7 pig farms, 3 cork industries, 3 waste management plants, 2 wastewater treatment plants and 1 horse stable) and a low fungal load (10 hospital canteens, 8 college canteens and 1 maternity hospital). In addition to culture-based methods, molecular tools were also applied to detect fungal burden in the settings with a higher fungal load. Results: From the 218 sampling sites, 140 (64.2%) presented different species in the examined surfaces when compared with the species identified in the air. A positive association in the high fungal load settings was found between the presence of different species in the air and surfaces. Wastewater treatment plants constituted the setting with the highest number of different species between the air and surface. Conclusions: We observed that surfaces sampling and application of molecular tools showed the same efficacy of species detection in high fungal load settings, corroborating the fact that surface sampling is crucial for a correct and complete analysis of occupational scenarios.

Phylodynamic modelling of foot-and-mouth disease virus sequence data

The under-reporting of cases of infectious diseases is a substantial impediment to the control and management of infectious diseases in both epidemic and endemic contexts. Information about infectious disease dynamics can be recovered from sequence data using time-varying coalescent approaches, and phylodynamic models have been developed in order to reconstruct demographic changes of the numbers of infected hosts through time. In this study I have demonstrated the general concordance between empirically observed epidemiological incidence data and viral demography inferred through analysis of foot-and-mouth disease virus VP1 coding sequences belonging to the CATHAY topotype over large temporal and spatial scales. However a more precise and robust relationship between the effective population size (

Seasonal variations in chemical composition and stable isotopes of farmed and wild Brazilian freshwater fish

This study examined variations in the Fulton condition factor, chemical composition, and stable isotopes of carbon and nitrogen in the Brazilian freshwater fish cachara (Pseudoplatystoma fasciatum), comparing farmed and wild fish in different seasons. Values for energy, protein, moisture, and Fulton's condition factor were higher for farmed than for wild fish in the rainy season, indicating better nutritional quality; however, these differences were not observed in the dry season. Likewise, we found significant enhancement of delta(15)N in farmed fish in the rainy season but not in the dry season, whereas enhancement of delta(13)C was observed in both seasons. The combined measurement of delta(13)C and delta(15)N provided traceability under all conditions. Our findings show that stable isotope analysis of C and N can be used to trace cachara origin, and that seasonal variations need to be considered when applying chemical and isotopic authentication of fish and fish products. (C) 2010 Elsevier Ltd. All rights reserved.

Plutarch's chemistry of stones and metals: conceptions and explanations. With an appendix on the TheSu XML annotation scheme

This dissertation presents a systematic and analytic overview of most of the information related to stones, minerals, and stone masonry which is found in the corpus of Plutarch of Chaeronea, combined with most of the information on metals and metalworking which is connected to the former. This survey is intended as a first step in the reconstruction of the full landscape of ‘chemical’ ideas occurring in Plutarch’s writings; accordingly, the exposition of the relevant passages, the assessment of their possible interpretations, the discussion on their implications, and their contextualization in the ancient traditions have been conducted with a special interest in the ‘mineralogical’ and ‘metallurgic’ themes developed in the frame of natural philosophy and meteorology. Although in this perspective physical etiology could have come to acquire central prominence, non-etiological information on Plutarch’s ideas on the nature and behaviour of stones and metals has been treated as equally relevant to reach a fuller understanding of how Plutarch conceptualized and visualized them in general, in- and outside the frame of philosophical explanation. Such extensive outline of Plutarch’s ideas on stones and metals is a prerequisite for an accurate inquiry into his use of the two in analogies, metaphors, and symbols: to predispose this kind of research was another aim of the present survey, and this aim has contributed to shape it; moreover, a special attention has been paid to the analysis of analogical and figurative speaking due to the nature itself of a large part of Plutarch’s references to stones and metals, which are either metaphorical, presented in close association with metaphors, or framed in analogies. Much of the information used for the present overview has been extracted —always with supporting argumentation— from the implications of such metaphors and analogies.

Analysis of extracellular vesicles from patients with advanced pancreatic cancer identifies miRNAs with predictive value for treatment with gemcitabine + nab-paclitaxel

Pancreatic cancer (PC) is the seventh leading cause of cancer death. Despite recent therapy advancements, 5-year survival is 11%. Resistance to therapy is common, and no predictive factors, except for BRCA1/2 and PALB2 mutations, can drive treatment selection. Based on the easy isolation of extracellular vesicles (EVs) from blood and the role of EV-borne miRNAs in chemoresistance, we analyzed EVs and their miRNA content in order to identify predictive factors. First, we analyzed samples from 28 PC patients and 7 healthy subjects, in order to establish methods for isolation and analysis of EVs and their miRNA content. We observed a significantly different expression of 28 miRNAs, including oncogenic or tumor suppressor miRNAs, showing the ability of our approach to detect candidate biomarkers. Then, we analyzed samples of 21 advanced PC patients, collected before first-line treatment with gemcitabine + nab-paclitaxel, and compared findings in responders and non-responders. EVs have been analyzed with Nanoparticle tracking analysis, flow cytometry and RNA-Seq; then, laboratory results have been matched with clinical data. Nanoparticle tracking analysis did not show any significant difference. Flow cytometry showed a lower expression of SSE4 and CD81 in responders. Finally, miRNA analysis showed 25 upregulated and 19 downregulated miRNAs in responders. In particular, in responders we observed upregulation of miR-141-3p, miR-141-5p, miR-200a-3p, miR-200b-3p, miR-200c-3p, miR-375-3p, miR-429, miR-545-5p. These miRNAs have targets with a previously reported role in PC. In conclusion, we show the feasibility of the proposed approach to identify EV-derived biomarkers with predictive value for therapy with gemcitabine + nab-paclitaxel in PC. Our findings highlight the possibility to exploit liquid biopsy for personalized treatment in PC, in order to maximize chances of response and patients’ outcome. These findings are worthy of further investigation: in the same setting, with different chemotherapy schedules, and in different disease settings such as preoperative therapy.

Life cycle assessment (lca) of six separation methods of polyethylene and aluminum in tetra pak

In food and beverage industry, packaging plays a crucial role in protecting food and beverages and maintaining their organoleptic properties. Their disposal, unfortunately, is still difficult, mainly because there is a lack of economically viable systems for separating composite and multilayer materials. It is therefore necessary not only to increase research in this area, but also to set up pilot plants and implement these technologies on an industrial scale. LCA (Life Cycle Assessment) can fulfil these purposes. It allows an assessment of the potential environmental impacts associated with a product, service or process. The objective of this thesis work is to analyze the environmental performance of six separation methods, designed for separating the polymeric from the aluminum fraction in multilayered packaging. The first four methods utilize the chemical dissolution technique using Biodiesel, Cyclohexane, 2-Methyltetrahydrofuran (2-MeTHF) and Cyclopentyl-methyl-ether (CPME) as solvents. The last two applied the mechanical delamination technique with surfactant-activated water, using Ammonium laurate and Triethanolamine laurate as surfactants, respectively. For all six methods, the LCA methodology was applied and the corresponding models were built with the GaBi software version 10.6.2.9, specifically for LCA analyses. Unfortunately, due to a lack of data, it was not possible to obtain the results of the dissolution methods with the solvents 2-MeTHF and CPME; for the other methods, however, the individual environmental performances were calculated. Results revealed that the methods with the best environmental performance are method 2, for dissolution methods, and method 5, for delamination methods. This result is confirmed both by the analysis of normalized and weighted results and by the analysis of 'original' results. An hotspots analysis was also conducted.

Calibration of design strength values of Wire and Arc Additive Manufacturing inclined bars and intersections

Although being studied only for few years, Wire and Arc Additive Manufacturing (WAAM) will become the predominant way of producing stainless-steel elements in a near-like future. The analysis and study of such elements has yet to be defined in a proper way, but the projects regarding this subject are innovating more and more thanks to the findings discovered by the latter. This thesis is focused on an initial stage on the analysis of mechanical and geometrical properties of such stainless-steel elements produced by MX3D laboratories in Amsterdam, and to perform a calibration of the design strength values by means of Annex D of Eurocode 0, which talks about the analysis of the semi-probabilistic safety factors, hence the definition of characteristic values. Moreover, after testing the stainless-steel specimens by means of strain gauges and after obtaining mechanical and geometrical properties, a statistical analysis of such properties and an evaluation of characteristic values is performed. After this, there is to execute the calibration of design strength values of WAAM inclined bars and intersections.

Interação mãe-bebê e uso de chupeta no contexto do nascimento pré-termo : cultura, representações sociais e processos proximais

Objetivo: Investigar a avaliação de mães de recém-nascidos pré-termo (RNPT) egressos de unidades de terapia intensiva neonatal (UTIN) quanto à interação mãe-bebê e uso de chupeta nos primeiros dois anos. Método: O planejamento do estudo longitudinal foi baseado na Teoria Bioecológica do Desenvolvimento Humano, com foco nos processos proximais (PP), utilizando entrevistas gravadas com 62 mães de RNPT no contexto da UTIN e 33 aos seis, 12, 18 e 24 meses de idade do bebê, considerando Grupo-A (chupeta) e Grupo-B (não usou chupeta). Resultados: A vivência em UTIN foi considerada evento impactante na vida das mães, mas expectativas futuras para a relação mãe-bebê foram positivas. A tentativa de oferta da chupeta foi 96,2% e seu uso aos seis meses foi 50% (n=52), significativamente associado com prematuridade pela relação peso/idade-gestacional (p-valor=0,044), dificuldades para estabelecer aleitamento materno exclusivo (AME) (p=0,012) e primiparidade (p=0,02). Apresentaram relação com menor frequência de chupeta: AME ≥3 meses (p=0,026) e tempo de aleitamento materno ≥6 meses. A chupeta configurou-se como uma das representações sociais sobre objetos de bebê, elaboradas pelas participantes aos 12 meses de idade do bebê. Características de temperamento calmo/tranquilo da mãe foram mais frequentes no Grupo-A e o temperamento nervoso/agitado/irritado no Grupo-B (p-valor=0,041). No Grupo-A predominou o temperamento do bebê calmo/fácil-de-cuidar/independente, enquanto no Grupo-B as características de temperamento agitado/bagunceiro/teimoso/agressivo (p-valor=0,026), associado também à necessidade de várias tentativas de oferta da chupeta (p-valor=0,006). No Grupo-A, o número de pessoas para apoio social foi uma ou duas (77,8%), enquanto no Grupo-B foram três a sete (66,7%), p-valor=0,001. A contribuição da chupeta como auxiliar nos PP foi indiferente para mães que controlavam o hábito, enquanto o uso irrestrito facilitava a resolução do choro, liberando a mãe para outras tarefas, atuando como limitador dos PP. A análise da evolução e complexidade dos PP demonstrou não haver interferência pelo uso da chupeta, tendo sido mais efetivos quando as mães tinham maior escolaridade e nas classes econômicas A e B. Conclusão: Aspectos culturais influenciaram na oferta da chupeta, mas sua aceitação ocorreu principalmente em RNPT pequeno para idade gestacional, diante das dificuldades para AME, menor extensão do apoio social e temperamento do bebê calmo/fácil-de-cuidar/independente, também associado à aceitação mais fácil da chupeta. O uso irrestrito da chupeta demonstrou atuar como limitador dos processos proximais.

Joint Analysis of Multiple Algorithms and Performance Measures

There has been an increasing interest in the development of new methods using Pareto optimality to deal with multi-objective criteria (for example, accuracy and time complexity). Once one has developed an approach to a problem of interest, the problem is then how to compare it with the state of art. In machine learning, algorithms are typically evaluated by comparing their performance on different data sets by means of statistical tests. Standard tests used for this purpose are able to consider jointly neither performance measures nor multiple competitors at once. The aim of this paper is to resolve these issues by developing statistical procedures that are able to account for multiple competing measures at the same time and to compare multiple algorithms altogether. In particular, we develop two tests: a frequentist procedure based on the generalized likelihood-ratio test and a Bayesian procedure based on a multinomial-Dirichlet conjugate model. We further extend them by discovering conditional independences among measures to reduce the number of parameters of such models, as usually the number of studied cases is very reduced in such comparisons. Data from a comparison among general purpose classifiers is used to show a practical application of our tests.

Comparison of BR and QR Eigenvalue Algorithms for Power System Small Signal Stability Analysis

The BR algorithm is a novel and efficient method to find all eigenvalues of upper Hessenberg matrices and has never been applied to eigenanalysis for power system small signal stability. This paper analyzes differences between the BR and the QR algorithms with performance comparison in terms of CPU time based on stopping criteria and storage requirement. The BR algorithm utilizes accelerating strategies to improve its performance when computing eigenvalues of narrowly banded, nearly tridiagonal upper Hessenberg matrices. These strategies significantly reduce the computation time at a reasonable level of precision. Compared with the QR algorithm, the BR algorithm requires fewer iteration steps and less storage space without depriving of appropriate precision in solving eigenvalue problems of large-scale power systems. Numerical examples demonstrate the efficiency of the BR algorithm in pursuing eigenanalysis tasks of 39-, 68-, 115-, 300-, and 600-bus systems. Experiment results suggest that the BR algorithm is a more efficient algorithm for large-scale power system small signal stability eigenanalysis.

Identification and removal of low-complexity sites in allele-specific analysis of ChIP-seq data.

MOTIVATION: High-throughput sequencing technologies enable the genome-wide analysis of the impact of genetic variation on molecular phenotypes at unprecedented resolution. However, although powerful, these technologies can also introduce unexpected artifacts. Results: We investigated the impact of library amplification bias on the identification of allele-specific (AS) molecular events from high-throughput sequencing data derived from chromatin immunoprecipitation assays (ChIP-seq). Putative AS DNA binding activity for RNA polymerase II was determined using ChIP-seq data derived from lymphoblastoid cell lines of two parent-daughter trios. We found that, at high-sequencing depth, many significant AS binding sites suffered from an amplification bias, as evidenced by a larger number of clonal reads representing one of the two alleles. To alleviate this bias, we devised an amplification bias detection strategy, which filters out sites with low read complexity and sites featuring a significant excess of clonal reads. This method will be useful for AS analyses involving ChIP-seq and other functional sequencing assays.

Early detection of metabolic and energy disorders by thermal time series stochastic complexity analysis

Maintenance of thermal homeostasis in rats fed a high-fat diet (HFD) is associated with changes in their thermal balance. The thermodynamic relationship between heat dissipation and energy storage is altered by the ingestion of high-energy diet content. Observation of thermal registers of core temperature behavior, in humans and rodents, permits identification of some characteristics of time series, such as autoreference and stationarity that fit adequately to a stochastic analysis. To identify this change, we used, for the first time, a stochastic autoregressive model, the concepts of which match those associated with physiological systems involved and applied in male HFD rats compared with their appropriate standard food intake age-matched male controls (n=7 per group). By analyzing a recorded temperature time series, we were able to identify when thermal homeostasis would be affected by a new diet. The autoregressive time series model (AR model) was used to predict the occurrence of thermal homeostasis, and this model proved to be very effective in distinguishing such a physiological disorder. Thus, we infer from the results of our study that maximum entropy distribution as a means for stochastic characterization of temperature time series registers may be established as an important and early tool to aid in the diagnosis and prevention of metabolic diseases due to their ability to detect small variations in thermal profile.

Analysis of heuristic algorithms for the transportation model in static and multistage planning in network expansion systems

The usefulness of the application of heuristic algorithms in the transportation model, first proposed by Garver, is analysed in relation to planning for the expansion of transmission systems. The formulation of the mathematical model and the solution techniques proposed in the specialised literature are analysed in detail. Starting with the constructive heuristic algorithm proposed by Garver, an extension is made to the problem of multistage planning for transmission systems. The quality of the solutions found by heuristic algorithms for the transportation model is analysed, as are applications in problems of planning transmission systems.