Miocene to Pleistocene gluconite-rich layers of the US Mid-Atlantic margin

Glauconite is generally agreed to be a reliable indicator of low sedimentation rate, but little systematic work has been done to specify the role of glauconite in a sequence-stratigraphic framework. Ocean Drilling Program Leg 174A recovered a good record of late Tertiary sediments along the shelf edge of the New Jersey US Atlantic margin, and glauconite was present in many intervals of the cores, sometimes in vertical proximity to sequence boundaries. Leg 174A glauconite was analyzed with binocular microscope, XRD and SEM to determine the percent of potassium and degree of maturity in order to relate occurrence to depositional environment. Seismic data were used to locate sequence boundaries, and percent glauconite was visually estimated. Glauconite samples from Site 1073 were found to have formed within a lowstand systems tract (LST), and as part of a distal condensed section (CS) within a transgressive systems tract (TST). These results are comparable to those from nearby Site 903 of Leg 150, which indicate a similar depositional setting for glauconite. Glauconites at shelf Sites 1071 and 1072 likely formed in the TST as well. Onshore, glauconite occurs mainly in transgressive systems tracts. The Miocene appears to be the upper limit of glauconite formation onshore. As the magnitude of sea-level change decreased, present onshore locations became too nearshore to maintain sediment-free environments, and the zone of glauconite deposition moved seaward. The same process did not occur offshore until the Plio-Pleistocene. Low subsidence-rate margins such as the US Atlantic are subject more to the variations of sea-level than to changes in sediment supply, tectonics, or other factors influencing their depositional patterns. Although glauconite occurrence is widespread in the stratigraphic record, this study demonstrates that for low subsidence-rate margins, primary deposition of glauconite is largely restricted to the TST.

"Et occidetur virtute Domini Antichristus a Mikaele arcangelo". Paisaje y escatología en Sant Miquel de Llíria (s. XIV d. C.)

El presente articulo intenta determinar las razones por las que el santuario de Sant Miquel de Llíria, uno de los más importantes de la actual provincia de Valencia, se consagró al arcàngel guerrero. Se estudia para ello la historia de su culto en Occidente, haciendo hincapié en aspectos como su relación con los lugares elevados y la frecuente proximidad de sus santuarios con aquellos dedicados a la Virgen. Atenderemos también a aspectos fundamentales del contexto histórico, como los movimientos de renovación espiritual medievales, la influencia del médico y teólogo Arnau de Vilanova en la Valencia de principios del siglo XIV y las profecías escatológicas vinculadas a la llegada del Anticristo.

Das Gebet des Herrn oder Das Vater unser : in 150 der schönsten und erhabensten verschiedenen metrischen Bearbeitungen : ein gediegenenes Andachts- und Erbauungsbuch für Christen jedes Alters, Standes und aller Confessionen

gesammelt u. verlegt von J.A. Michaelis

Fest-Blüthen : (eine Sammlung von mehr als 150 Gelegenheitsdichtungen in 12 Abtheilungen

von Karl Aug. Schmidt, z. Z. evang. Schul- und Predigtamts-Candidat

En El Colombiano más de 150 kilómetros de clasificados

Fondo Margaritainés Restrepo

Resolución 150 del 29 de octubre de 2013: Por la cual se resuelve una revocatoria directa en el registro mercantil

Servicios registrales

Synthesis and characterization of K2Ca5(SO4)6· H2O, the equivalent of görgeyite, a rare evaporite mineral

Görgeyite, K2Ca5(SO4)6··H2O, is a very rare monoclinic double salt found in evaporites related to the slightly more common mineral syngenite. At 1 atmosphere with increasing external temperature from 25 to 150 °C, the following succession of minerals was formed: first gypsum and K2O, followed at 100 °C by görgeyite. Changes in concentration at 150 °C due to evaporation resulted in the formation of syngenite and finally arcanite. Under hydrothermal conditions, the succession is syngenite at 50 °C, followed by görgyeite at 100 and 150 °C. Increasing the synthesis time at 100 °C and 1 atmosphere showed that initially gypsum was formed, later being replaced by görgeyite. Finally görgeyite was replaced by syngenite, indicating that görgeyite is a metastable phase under these conditions. Under hydrothermal conditions, syngenite plus a small amount of gypsum was formed, after two days being replaced by görgeyite. No further changes were observed with increasing time. Pure görgeyite showed elongated crystals approximately 500 to 1000 µ m in length. The infrared and Raman spectra are mainly showing the vibrational modes of the sulfate groups and the crystal water (structural water). Water is characterized by OH-stretching modes at 3526 and 3577 cm–1 , OH-bending modes at 1615 and 1647 cm–1 , and an OH-libration mode at 876 cm–1 . The sulfate 1 mode is weak in the infrared but showed strong bands at 1005 and 1013 cm–1 in the Raman spectrum. The 2 mode also showed strong bands in the Raman spectrum at 433, 440, 457, and 480 cm–1 . The 3 mode is characterized by a complex set of bands in both infrared and Raman spectra around 1150 cm–1 , whereas 4 is found at 650 cm–1.

Whisper our futures

Whisper Our Futures was an invited design proposal to produce a major public artwork for the State of Queensland’s 150th Anniversary Celebrations. It involved a network of 100 individual scrolling digital text boxes each with individual audio systems arranged together in a tessellated format. This form (specified by the originating brief) both mimicked the soaring gothic arches typical of Queensland cathedrals and was also suggestive of their stained glass windows. Each text module presented a message in both visual and audible forms for Queenslanders living 150 years hence - spoken both by the general public aw well as prominent figures. In this way the work was designed as a focus of future hope, historical reflection and inspiration to visitors to Queensland cathedrals throughout the entire year of celebrations (2009). The work was planned to premiere at Brisbane’s main Anglican Cathedral and then tour to nine other state cathedrals throughout 2009.---- Two staged proposals and budgets were invited throughout 2007. After the second successful proposal stage the State Premier and cabinet changed, ultimately leading the public art components to be dropped from the program. The proposal currently remains on file at the Queensland Premiers Office.

Improving daylighting performance of mirrored light pipes

This paper assesses and compares the performances of two daylight collection strategies, one passive and one active, for large-scale mirrored light pipes (MLP) illuminating deep plan buildings. Both strategies use laser cut panels (LCP) as the main component of the collection system. The passive system comprises LCPs in pyramid form, whereas the active system uses a tiled LCP on a simple rotation mechanism that rotates 360° in 24 hours. Performance is assessed using scale model testing under sunny sky conditions and mathematical modelling. Results show average illuminance levels for the pyramid LCP ranging from 50 to 250 lux and 150 to 200 lux for the rotating LCPs. Both systems improve the performance of a MLP. The pyramid LCP increases the performance of a MLP by 2.5 times and the rotating LCP by 5 times, when compared to an open pipe particularly for low sun elevation angles.

Supporting pre-tender construction planning with virtual prototyping

Purpose – Virtual prototyping technologies linked to building information models are commonplace within the aeronautical and automotive industries. Their use within the construction industry is now emerging. The purpose of this paper is to show how these technologies have been adopted on the pre-tender planning for a typical construction project. Design/methodology/approach – The research methodology taken was an “action research” approach where the researchers and developers were actively involved in the production of the virtual prototypes on behalf of the contractor thereby gaining consistent access to the decisions of the planning staff. The experiences from the case study were considered together with similar research on other construction projects. Findings – The findings from the case studies identify the role of virtual prototyping in components modelling, site modelling, construction equipment modelling, temporary works modelling, construction method visualization and method verification processes. Originality/value – The paper presents a state-of-the-art review and discusses the implications for the tendering process as these technologies are adopted. The adoption of the technologies will lead to new protocols and changes in the procurement of buildings and infrastructure.

Environmental assessment for commercial buildings: Stakeholder requirements and tool characteristics

The Cooperative Research Centre for Construction Innovation (CRC CI) is a national research, development and implementation centre focused on the needs of the property, design, construction and facility management sectors. Established in 2001 and headquartered at Queensland University of Technology as an unincorporated joint venture under the Australian Government's Cooperative Research Program, the CRC CI is developing key technologies, tools and management systems to improve the effectiveness of the construction industry. The CRC CI is a seven year project funded by a Commonwealth grant and industry, research and other government support. More than 150 researchers and an alliance of 19 leading partner organisations are involved in and support the activities of the CRC CI