1000 resultados para Álcool como combustível - Variações sazonais
Resumo:
The aim of this study was to evaluate the effects of residual leaf area index (rLAI), years of evaluation and grazing cycles on the accumulation and disappearance of forage, and changes in the pasture structure of xaraes palisadegrass submitted to grazing intensities and intermittent stocking in two summers. The experiment was carried out at the Faculdade de Ciencias Agrarias e Veterinaria of Unesp, Campus of Jaboticabal, SP and the intensities of grazing were defined by four rLAI: 0.8, 1.3, 1.8 and 2.3. When the canopy intercepted 95% of incident light, the animals were placed on the pasture for grazing and kept until the rLAI target has been reached. Pastures were grazed by non-lactating Holstein cows (Bos Taurus Taurus L.), using the technique of mob-stocking. It was evaluated the canopy height, accumulation, disappearance and morphological components of forage and rest period. Residual leaf area index from 1.3 to 1.8 are the best in the accumulation and disappearance of forage and pasture structure. It is observed variability of the accumulation and disappearance of forage and pasture structure for years of assessment and grazing cycles within each year.
Resumo:
Pós-graduação em Engenharia Mecânica - FEIS
Resumo:
Considering that alcohol has been identified, in the literature, as an evident risk factor for osteoporosis development, inducing loss of bone mass, the aim of this study was to evaluate the effect of the alcohol on the femur of male and female rats. For this purpose, 35 male and 35 female rats, divided into seven groups of five animals per genera were included. The groups were: control group that received food and water as much as they wished; alcohol group in the concentrations of 10, 20 and 30% and the isocalorie: groups corresponding to the concentration of alcohol. After 8 weeks, the animals were sacrificed and evaluated regarding to the body weight and nutritional conditions. Unilateral femurs were removed and analyzed in relation to the length, width, and thickness of the bone cortical, trabeculae percentage and optical density. Data obtained were analyzed by ANOVA (Tukey; p<0.05). Regarding to the weight, loss of weight was observed in the animals of the group alcohol 20% among females and 30% among the males. In relation to the nutritional conditions, the females with the dosages of 10, 20 and 30% of alcohol swallowed a mean of 25, 39 and 53% of Kcall and the males 22, 36 and 45 Kcal Jday coming from the alcohol. Alcohol reduced the length of the femur only in the group MG6. Mesio-distal width was higher in the group FG6 although the antero-posterior width was not modified. The cortical thickness among males and females was not altered however the percentage of trabeculae bone was reduced among females alcohol 30% and among males with the three alcoholic concentrations. Optical density was reduced in the concentration of 30% among the males and females. Under the experimental conditions, it could be concluded that the effect of alcohol was more evident among the males and in the trabeculae bone, and that the alcoholic concentration of 30% was the most harmful for the bone tissue, ....
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Alcoholic beverage and the factors associated with the consumption of this substance among teenagers worry authorities linked to education and health. This study aimed to investigate the use of risky alcohol among schoolchildren. The study was conducted in two cities in the countryside of São Paulo. Attended by 54 students of a city with 5,000 inhabitants (City A) and 53 students in a city of 35,000 inhabitants (City B). It was applied in the classroom a questionnaire for screening on the use of alcohol (AUDIT). In the results if notes that the percentage of participants who reached score above 7 points, was 25.9 % for the City A and 11.3 % for the city B. It was concluded that there was a greater frequency of students doing risky use of alcohol among students of the city with the lowest number of inhabitants, there are significant differences (p ≤ 0.001 ). Further studies are needed to identify possible variables involved in the results between the cities.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The properties of the hot melt adhesive pressure sensitive (HMPSA) using an elastomer as a base polymer a copolymer of styrene and butadiene (SBS) and variation of tackifiers resins such as hydrocarbon resins and hydrogenated hydrocarbon were investigated. The formulations were prepared by mixing process within shear. The adhesives prepared were evaluated in test Brookfield viscosity and softening point Ring and Ball to compare the formulations and the influence of variations in raw materials. Infrared analyzes were performed to detect the reactions between the inputs and investigate the chemical interactions of the same properties of the adhesive. In thermal analysis, the assay was performed thermogravimetry (TG) and diferencial exploratory calorimetry (DSC). Were investigated the parameters of the tensile test on each of the formulations. Finally, were analysed comparatively the basic formulations of adhesives with their respective raw materials
Resumo:
Abusive consumption of alcohol leads to several negative consequences to health and quality of life, as it increases the frequency of diseases that cause death or functional disabilities. The rates of patients admitted to hospital due to physical problems stemming from alcohol abuse are high. This study aimed at identifying patients according to variables age, gender and education level as well as at evaluating the prevalence of CAGE-positive patients and morbidity due to CID-10 (International Classification of Diseases) by the World Health Organization. It is a cross-sectional, observational, exploratory, descriptive and quantitative study. It was conducted at the Botucatu School of Medicine University Hospital (HC) from July to September 2010, at the Internal Medicine ward. This ward aggregates 5 specialties, namely, Cardiology, Hematology, General Medicine, Nephrology and Gastroclinic. Presently, it has 36 beds, of which four are for Intensive Care Therapy (ICT). Three hundred and ten medical charts were analyzed for identification of morbidities and of variables age, gender and schooling. A closed semistructured questionnaire including, among other questions, the CAGE test was applied to each individual. The CAGE test is a questionnaire that comprises four questions and considers that one who answers two or more of such questions affirmatively is a suspected case of alcoholism. The total population studied included 310 patients. Indexes of 60% (186) male and of 40% (124) female patients were found. As regards age range, a population with a higher prevalence of individuals from 51 to 70 years old (41%) was observed. The main education indexes were: incomplete Elementary School: 23.22% (72), complete Elementary School: 21.61% (67), incomplete Secondary School: 18.40% (57) and Illiteracy: 17.74% (55). As regards diseases, a higher proportion was observed for: ...(Complete abstract click electronic access below)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
In recent years the aeronautic industries has increased investment in areas of technological research aiming at materials that offer better performance, safety, weight reduction and fuel consumption. For this reason the most studied materials are polymeric materials, due to their higher mechanical strength and higher stiffness. This work evaluated characteristics of two composite laminates produced from the same process, but they differed only in regions where the resin was injected and the vacuum position. The composite laminates were SC-79 resin reinforced with glass fiber fabric (plain weave) processed via VARTM. For this reason the material was subjected to mechanical tests such as: tensile, and fatigue following standards ASTM D 3039 and ASTM D 3479, respectively. The latter was observed the S-N curve. It was performed the ultrassonic C-scan analysis to check impregnation of the fiber. Considering that the process was the same for the two laminates, with small variations in the injection and in vacum ports, it was expected to find similar characteristics
Resumo:
The adhesives used in the production of engineered boards have been object of study over the years in order to improve the properties of the boards with less energy consumption, lower production costs and reduced environmental impact. In addition to that, process variables may affect the properties of the board. The present study aimed to characterize sheets of plywood, manufactured with two types of adhesives, under two different pressing conditions. The adhesives used for the study were Phenol-formaldehyde and Polyurethane castor oil based. The pressure of pressing was varied in a range from 75 to 160 Bar, in order to verify how they influence the physical and mechanical properties of the board. The tests performed resulted in a conclusion that shows that the moister content of the veneers interferes on the physical and mechanical tests. In general, boards produced with polyurethane resin showed superior physical and mechanical results; although the ones produced with phenol formaldehyde at a pressure of 75 Bar had always equal or higher values, compared to what is found in literature
Resumo:
The State of São Paulo is responsible for the largest sugar cane production in Brazil, as well as the largest production of ethanol made of this raw material – which is widely used as fuel for automobiles. This utilization began in the 1970’s, with the institution by the Brazilian government of the National Alcohol Program (PRO-ÁLCOOL), as a consequence of the petroleum crisis, rising again five years ago, with the development of flex fuel cars. The obtaining process of ethanol originates residues; amongst them, vinasse is the one that’s generated in the largest amount (an average of 10 to 13 litres/litre of ethanol produced). The disposal of this residue in waters was only forbidden in 1978, but before that, researchers had already been investigating its utilization as raw material. This paper had the objective of accompany the biodegradation of vinasse by evaluating the oxygen comsumption during it until the ultimate Biochemical Oxygen Demand (uBOD), performed in twenty days; another objective was to analyse the biomass production of Saccharomyces cerevisae in this residue. Physical and chemical analyses of the residue were also performed, as well as acute toxicity essays using Daphnia similis and Dugesia tigrina, before and after its biodegradation. The physical and chemical analyses pointed elevated acidness (pH = 3,98), conductivity (8,30 mS/cm) and COD (25.693,43 mg O2/L) and mean quantity of suspended solids (5.246 mg/L). The toxicity essays indicated absence of toxic potential in vinasse after biodegradation for both species. The uBOD degradated until 88,22% of the COD, demonstrating the possibility of biodegradation of most of the residue’s organic load in a relatively short period of time. S. cerevisae caused a 37,03% COD diminution in vinasse, diminished its conductivity and promoted a slight elevation of the pH; it obtained low biomass...(Complete abstract click electronic access below)
Resumo:
Non-intrusive methods of diagnosis, such as spectral analysis of the radiation emitted by the system, have been used as a viable alternative for determining the temperature of combustion systems. Among them, the determination of temperature by natural emission spectroscopy has the advantage of requiring relatively simple experimental devices. Once Chemiluminescent species are formed directly in the excited state, the collection and recording of radiation emission spectrum is enough to determine the temperature (CARINHANA, 2008). In this study we used the process of making direct comparisons between the experimental spectra obtained in the laboratory from the plasma of alcohol, and the theoretical spectra plotted from a computer program developed at the IEAv. The objective was to establish a fast and reliable method to measure the rotational temperature of the radical C2*. The results showed that the temperature of the plasma, which in turn can be taken as the rotational temperature of the system, is proportional to the pressure. The temperature values ranged from ca. 2300 ~ 2500 K at a pressure of 19 mmHg to 3100 ~ 3500 K for the pressure of 46 mmHg. The temperature values are somewhat smaller when we consider the theoretical spectrum as a Lorentzian curve. The overlap of the spectra was better when using the profile curve, but still were not exactly superimposed. The solution to improve the overlap of the theoretical with the experimental spectra is the use of a curve that has the convolution of two profiles analyzed: Lorentzian and Gaussian. This curve is called the Voigt profile, which will also be implemented by programmers and studied in a next work
Resumo:
The changes occurring in Brazilian agriculture, with the inclusion of agro-industrial activities in your mode of production, must be analyzed to verify the changes in the behavior of territorial dynamics. Through changing the Rural Complex, traditional for the Agroindustrial Complex tightly integrated with trade and industry brought many consequences for the rural population, with regard to employment. Understanding this transformation capitalist the field is needed to analyze the actors involved in this process and the policies adopted for the expansion of sugar and ethanol activity in the State of São Paulo and the consequences for the spatial organization. The expansion of cane production areas were governed by the Institute of Sugar and Alcohol (IAA), the National Alcohol Program (PROÁLCOOL) Development Plan for the West of São Paulo - PRO-WEST and Expansion Program for the production of Canavicultura for production of fuel for the State of São Paulo (PROCANA). The occupation of these agroindustrial facilities in rural spaces contextualized by territorialization of the rural complex, in that sense, understanding these concepts is a key part development in the research. therefore, are concepts of fundamental importance to geographical science, and interpreting their function and construction in rural spaces