955 resultados para [JEL:J40] Labor and Demographic Economics - Particular Labor Markets - General
Resumo:
En esta tesina presentamos los resultados de un proceso de investigación orientado a describir y analizar las influencias que tienen los mecanismos desarrollados por los trabajadores sobre la estructuración de algunas dimensiones claves del mercado de trabajo en el sector de producción de cine publicitario (PcP). La PCP se caracteriza por una modalidad de organización muy flexible y efímera, basada en proyectos individuales, que congrega a los trabajadores y recursos necesarios de forma temporaria. La transitoriedad de los proyectos plantea desafíos formidables con respeto a su coordinación y regulación en el tiempo. Sin embargo, los mismos funcionan sobre una organización permanente sustentada sobre una red de contactos sociales gestados entre los miembros. En este marco, surge nuestro interrogante acerca del papel que juegan las lógicas de los propios trabajadores en el incierto mercado de trabajo de la PCP. La perspectiva teórica adoptada en nuestro trabajo, parte de la consideración de que los mercados de trabajo son producto de construcciones sociales que se diferencian histórica y espacialmente y que por tanto, se hallan socialmente regulados por una diversidad de influencias. Por ello, hemos priorizado la investigación empírica del caso particular. Nuestro objetivo principal, ha supuesto la indagación de distintas dimensiones analíticas. Así, en primer lugar, presentamos las características socioproductivas y económicas más relevantes del sector para luego centrarnos en las cuestiones nodales de nuestro estudio que contemplaron un análisis detallado de los procesos de regulación de algunas dimensiones del mercado de trabajo, a saber: acceso, reclutamiento, calificación y movilidad. Así, esta tesina pretende ser un aporte al análisis de la dinámica de los mercados de trabajo en contextos productivos flexibles, así como una contribución al conocimiento de sectores escasamente abordados por los estudios del trabajo
Resumo:
En esta tesina presentamos los resultados de un proceso de investigación orientado a describir y analizar las influencias que tienen los mecanismos desarrollados por los trabajadores sobre la estructuración de algunas dimensiones claves del mercado de trabajo en el sector de producción de cine publicitario (PcP). La PCP se caracteriza por una modalidad de organización muy flexible y efímera, basada en proyectos individuales, que congrega a los trabajadores y recursos necesarios de forma temporaria. La transitoriedad de los proyectos plantea desafíos formidables con respeto a su coordinación y regulación en el tiempo. Sin embargo, los mismos funcionan sobre una organización permanente sustentada sobre una red de contactos sociales gestados entre los miembros. En este marco, surge nuestro interrogante acerca del papel que juegan las lógicas de los propios trabajadores en el incierto mercado de trabajo de la PCP. La perspectiva teórica adoptada en nuestro trabajo, parte de la consideración de que los mercados de trabajo son producto de construcciones sociales que se diferencian histórica y espacialmente y que por tanto, se hallan socialmente regulados por una diversidad de influencias. Por ello, hemos priorizado la investigación empírica del caso particular. Nuestro objetivo principal, ha supuesto la indagación de distintas dimensiones analíticas. Así, en primer lugar, presentamos las características socioproductivas y económicas más relevantes del sector para luego centrarnos en las cuestiones nodales de nuestro estudio que contemplaron un análisis detallado de los procesos de regulación de algunas dimensiones del mercado de trabajo, a saber: acceso, reclutamiento, calificación y movilidad. Así, esta tesina pretende ser un aporte al análisis de la dinámica de los mercados de trabajo en contextos productivos flexibles, así como una contribución al conocimiento de sectores escasamente abordados por los estudios del trabajo
Resumo:
En esta tesina presentamos los resultados de un proceso de investigación orientado a describir y analizar las influencias que tienen los mecanismos desarrollados por los trabajadores sobre la estructuración de algunas dimensiones claves del mercado de trabajo en el sector de producción de cine publicitario (PcP). La PCP se caracteriza por una modalidad de organización muy flexible y efímera, basada en proyectos individuales, que congrega a los trabajadores y recursos necesarios de forma temporaria. La transitoriedad de los proyectos plantea desafíos formidables con respeto a su coordinación y regulación en el tiempo. Sin embargo, los mismos funcionan sobre una organización permanente sustentada sobre una red de contactos sociales gestados entre los miembros. En este marco, surge nuestro interrogante acerca del papel que juegan las lógicas de los propios trabajadores en el incierto mercado de trabajo de la PCP. La perspectiva teórica adoptada en nuestro trabajo, parte de la consideración de que los mercados de trabajo son producto de construcciones sociales que se diferencian histórica y espacialmente y que por tanto, se hallan socialmente regulados por una diversidad de influencias. Por ello, hemos priorizado la investigación empírica del caso particular. Nuestro objetivo principal, ha supuesto la indagación de distintas dimensiones analíticas. Así, en primer lugar, presentamos las características socioproductivas y económicas más relevantes del sector para luego centrarnos en las cuestiones nodales de nuestro estudio que contemplaron un análisis detallado de los procesos de regulación de algunas dimensiones del mercado de trabajo, a saber: acceso, reclutamiento, calificación y movilidad. Así, esta tesina pretende ser un aporte al análisis de la dinámica de los mercados de trabajo en contextos productivos flexibles, así como una contribución al conocimiento de sectores escasamente abordados por los estudios del trabajo
Resumo:
Inequality and integration have been sociology’s two key paradigms since the classics, associated with the names of Marx and Durkheim and Europe’s current economic crisis has forcefully reinvigorated their joint relevance. Above all, the debt crisis has fueled the wheel of social inequality: cash-starved states are further forced to cut back on public expenditures, to minimize the margin for redistribution and to raise new challenges for the integration policies addressing the emerging disparities. At the same time, global environmental and demographic problems, intertwined with escalating migration pressure, tear at the texture of European and all Western societies, in particular, the unequal impact of climate change and the unequal distribution of population growth make migration and integration paramount public policy issues and a soaring source of social conflict. In principle, the inequalities engendered by these cascading processes are also an opportunity. They increase the diversity of society and can bring about innovation and growth. Our desire and ability for social integration depends, above all, on the ultimate balance between these advantages and disadvantages. The chapters in the volume concentrate on the opportunities as well as the risks associated with these social changes from various angles. They are a handpicked set of outstanding contributions from the Congress of the Swiss Sociological Association that took place at the University of Bern, June 26–28, 2013.
Resumo:
As the success of East Asian countries has shown, labor-intensive industry is recognized to lead economic growth in the early stages of development, utilizing relatively low labor costs. This same growth process has already started in South and South East Asian LDCs since the mid-1990s. However, the manufacturing sector in sub-Saharan Africa has been underdeveloped and manufacturing exports, in particular labour-intensive goods, have stagnated. This paper investigates the international competitiveness of the African manufacturing sector and its determinants through an analytical survey of empirical studies and a comparison with Asian low income countries. Empirical evidences indicate that primary factors of competitiveness, namely productivity, labour cost and exchange rate are unfavorable in sub-Saharan Africa. Representative arguments attribute the weak competitiveness to problems in the business environment, factor endowment, and the exchange rate. However, careful review shows that labour cost is beyond the range explained by endowment and misalignment of exchange rates have been reduced in Africa. Moreover, comparison with Asian low income countries which have competitiveness in labour-intensive goods shows no difference in the quality of business environment, while the labour cost is significantly lower than sub-Saharan African countries. Although results should be considered tentative, high labour cost beyond endowment and conservative investment behavior emerge as important factors for the weak competitiveness in sub-Saharan Africa when controlling income level.
Resumo:
This paper develops a model of a spatial economy in which interregional trade patterns and the structure of the transport network are determined endogenously as a result of the interaction between industrial location behavior and increasing returns in transportation, in particular, economies of transport density. The traditional models assume either the structure of the transport network or industrial location patterns, and hence, they are unable to explain the interdependence of the two. It is shown that economies of transport density can be the primary source of industrial localization.
Resumo:
This paper presents issues affecting the movement of rural labour in Myanmar, by examining the background, purpose and earned income of labourers migrating to fishing villages in southern Rakhine. A broad range of socioeconomic classes, from poor to rich, farmers to fishermen, is migrating from broader areas to specific labour-intensive fishing subsectors, such as anchovy fishing. These labourers are a mixed group of people whose motives lie either in supplementing their household income or accumulating capital for further expansion of their economic activities. The concentration of migrating labourers with different objectives in this particular unstable, unskilled employment opportunity suggests an insufficiently developed domestic labour market in rural Myanmar. There is a pressing need to create stable labour-intensive industries to meet this demand.
Resumo:
This paper investigates the relationship between access to micro-credit and temporary seasonal migration, an issue which is largely ignored in the standard rural-urban migration literature. Seasonal migration due to agricultural downturns is a common phenomenon in developing countries. Using primary data from a cross-sectional household survey from the northwest part of Bangladesh, this study quantifies the factors that influence such migration decisions. Among other results, we find that network effects play a significant role in influencing the migration decision, with the presence of kinsmen at the place of destination having considerable impact. Seasonal migration is a natural choice for individual suffering periodic hardship; however the strict weekly loan repayment rules of Micro-credit Institutes can have an adverse effect on this process, reducing the ability of borrowers to react to a shock. Our result suggests that poor individuals prefer the option of not accessing the micro-credit and opt for temporal seasonal migration during the lean period. The results have numerous potential policy implications, including the design of typical micro-credit schemes.
Resumo:
This paper attempts to describe part of the history of Chinese rural migration to urban industrial areas. Using a case study of a township in Sichuan, the author examines a type of rural development which she defines as a "bottom-up" style strategy of regional development. Different types of social mobility are observed in the case study, and over its long history, migration in the township has offered diverse means of social mobility to the local peasants. The paper concludes by considering the diversity and limits of Chinese social mobility at this stage.
Resumo:
This paper examines whether population shrinkage leads to changes in urban hierarchy in terms of their relative size and function from the standpoint of the new economic geography. We find some salient patterns in which small cities in the agglomeration shadow become relatively bigger as medium industries spill over on them. This appears to be quite robust against a variation in the rate of natural change among cities. Thus, rank-size relationship and the urban hierarchy are partly disrupted as population shrinks. Regarding the welfare of the residents, a lower demand for land initially causes rent to go down, which boosts the utility. However, the illusion is short-lived because markets soon begin to shrink and suppress wages. We also find that it is better to maintain a slow pace of overall population decline in the long-term perspective. More importantly, it is crucial to sustain the relative livability of smaller cities to minimize the overall loss of utility.
Resumo:
In rural Ethiopia, parents play an important role in the major life events of their daughters such as education and marriage. However, parents’ roles have been evolving, likely due to the rapid expansion of educational opportunities for girls and the growing need of cash income among rural households. Currently, encouraging their daughters to take up further education and jobs in the formal sector contrasts with rural Ethiopian women’s conventional life course events in the past, which are characterized by early marriage and low educational profiles. An interview analysis with parents of young women indicated that under the continuing de-agrarianization among rural households, women are expected to have their own cash income generating activities to qualify as marriage partners.
Resumo:
The informal economy is a very important sector of the Indian economy. The National Council of Applied Economic Research estimates that the informal sector - "unorganised sector" - generates about 62% of GDP and provides for about 55% of total employment (ILO 2002, p. 14). This paper studies the characteristics of the workers in the informal economy and whether internal migrants treat this sector as a temporary location before moving on to the organised or formal sector to improve their lifetime income and living conditions. We limit our study to the Indian urban (non-agricultural) sector and study the characteristics of the household heads that belong to the informal sector (self-employed and informal wage workers) and the formal sector. We find that household heads that are less educated, come from poorer households, and/or are in lower social groups (castes and religions) are more likely to be in the informal sector. In addition, our results show strong evidence that the longer a rural migrant household head has been working in the urban sector, ceteris paribus, the more likely that individual has moved out of the informal wage sector. These results support the hypothesis that, for internal migrants, the informal wage labour market is a stepping stone to a better and more certain life in the formal sector.
Resumo:
Labour NGOs in China are relatively new organizations that emerged in the 1990s and have spread during the 2000s. Migrant workers in China are weak both socially and economically and have been lacking ways of voicing grievances and protesting. Grassroots labour NGOs for migrant workers seem to be an efficient channel for their voices. This paper examines how labour NGOs emerged and how they function in the context of current Chinese society. This paper adopts the case study method to describe three NGOs in Beijing and Shenzhen. The paper shows that these NGOs are using different methods to resolve migrant worker problems. At the same time, they are voicing the migrants' grievances and protesting in their own ways.
Resumo:
En los últimos años la tecnología láser se ha convertido en una herramienta imprescindible en la fabricación de dispositivos fotovoltaicos, ayudando a la consecución de dos objetivos claves para que esta opción energética se convierta en una alternativa viable: reducción de costes de fabricación y aumento de eficiencia de dispositivo. Dentro de las tecnologías fotovoltaicas, las basadas en silicio cristalino (c-Si) siguen siendo las dominantes en el mercado, y en la actualidad los esfuerzos científicos en este campo se encaminan fundamentalmente a conseguir células de mayor eficiencia a un menor coste encontrándose, como se comentaba anteriormente, que gran parte de las soluciones pueden venir de la mano de una mayor utilización de tecnología láser en la fabricación de los mismos. En este contexto, esta Tesis hace un estudio completo y desarrolla, hasta su aplicación en dispositivo final, tres procesos láser específicos para la optimización de dispositivos fotovoltaicos de alta eficiencia basados en silicio. Dichos procesos tienen como finalidad la mejora de los contactos frontal y posterior de células fotovoltaicas basadas en c-Si con vistas a mejorar su eficiencia eléctrica y reducir el coste de producción de las mismas. En concreto, para el contacto frontal se han desarrollado soluciones innovadoras basadas en el empleo de tecnología láser en la metalización y en la fabricación de emisores selectivos puntuales basados en técnicas de dopado con láser, mientras que para el contacto posterior se ha trabajado en el desarrollo de procesos de contacto puntual con láser para la mejora de la pasivación del dispositivo. La consecución de dichos objetivos ha llevado aparejado el alcanzar una serie de hitos que se resumen continuación: - Entender el impacto de la interacción del láser con los distintos materiales empleados en el dispositivo y su influencia sobre las prestaciones del mismo, identificando los efectos dañinos e intentar mitigarlos en lo posible. - Desarrollar procesos láser que sean compatibles con los dispositivos que admiten poca afectación térmica en el proceso de fabricación (procesos a baja temperatura), como los dispositivos de heterounión. - Desarrollar de forma concreta procesos, completamente parametrizados, de definición de dopado selectivo con láser, contactos puntuales con láser y metalización mediante técnicas de transferencia de material inducida por láser. - Definir tales procesos de forma que reduzcan la complejidad de la fabricación del dispositivo y que sean de fácil integración en una línea de producción. - Mejorar las técnicas de caracterización empleadas para verificar la calidad de los procesos, para lo que ha sido necesario adaptar específicamente técnicas de caracterización de considerable complejidad. - Demostrar su viabilidad en dispositivo final. Como se detalla en el trabajo, la consecución de estos hitos en el marco de desarrollo de esta Tesis ha permitido contribuir a la fabricación de los primeros dispositivos fotovoltaicos en España que incorporan estos conceptos avanzados y, en el caso de la tecnología de dopado con láser, ha permitido hacer avances completamente novedosos a nivel mundial. Asimismo los conceptos propuestos de metalización con láser abren vías, completamente originales, para la mejora de los dispositivos considerados. Por último decir que este trabajo ha sido posible por una colaboración muy estrecha entre el Centro Láser de la UPM, en el que la autora desarrolla su labor, y el Grupo de Investigación en Micro y Nanotecnologías de la Universidad Politécnica de Cataluña, encargado de la preparación y puesta a punto de las muestras y del desarrollo de algunos procesos láser para comparación. También cabe destacar la contribución de del Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas, CIEMAT, en la preparación de experimentos específicos de gran importancia en el desarrollo del trabajo. Dichas colaboraciones se han desarrollado en el marco de varios proyectos, tales como el proyecto singular estratégico PSE-MICROSIL08 (PSE-iv 120000-2006-6), el proyecto INNDISOL (IPT-420000-2010-6), ambos financiados por el Fondo Europeo de Desarrollo Regional FEDER (UE) “Una manera de hacer Europa” y el MICINN, y el proyecto del Plan Nacional AMIC (ENE2010-21384-C04-02), cuya financiación ha permitido en gran parte llevar a término este trabajo. v ABSTRACT. Last years lasers have become a fundamental tool in the photovoltaic (PV) industry, helping this technology to achieve two major goals: cost reduction and efficiency improvement. Among the present PV technologies, crystalline silicon (c-Si) maintains a clear market supremacy and, in this particular field, the technological efforts are focussing into the improvement of the device efficiency using different approaches (reducing for instance the electrical or optical losses in the device) and the cost reduction in the device fabrication (using less silicon in the final device or implementing more cost effective production steps). In both approaches lasers appear ideally suited tools to achieve the desired success. In this context, this work makes a comprehensive study and develops, until their implementation in a final device, three specific laser processes designed for the optimization of high efficiency PV devices based in c-Si. Those processes are intended to improve the front and back contact of the considered solar cells in order to reduce the production costs and to improve the device efficiency. In particular, to improve the front contact, this work has developed innovative solutions using lasers as fundamental processing tools to metalize, using laser induced forward transfer techniques, and to create local selective emitters by means of laser doping techniques. On the other side, and for the back contact, and approached based in the optimization of standard laser fired contact formation has been envisaged. To achieve these fundamental goals, a number of milestones have been reached in the development of this work, namely: - To understand the basics of the laser-matter interaction physics in the considered processes, in order to preserve the functionality of the irradiated materials. - To develop laser processes fully compatible with low temperature device concepts (as it is the case of heterojunction solar cells). - In particular, to parameterize completely processes of laser doping, laser fired contacts and metallization via laser transfer of material. - To define such a processes in such a way that their final industrial implementation could be a real option. - To improve widely used characterization techniques in order to be applied to the study of these particular processes. - To probe their viability in a final PV device. Finally, the achievement of these milestones has brought as a consequence the fabrication of the first devices in Spain incorporating these concepts. In particular, the developments achieved in laser doping, are relevant not only for the Spanish science but in a general international context, with the introduction of really innovative concepts as local selective emitters. Finally, the advances reached in the laser metallization approached presented in this work open the door to future developments, fully innovative, in the field of PV industrial metallization techniques. This work was made possible by a very close collaboration between the Laser Center of the UPM, in which the author develops his work, and the Research Group of Micro y Nanotecnology of the Universidad Politécnica de Cataluña, in charge of the preparation and development of samples and the assessment of some laser processes for comparison. As well is important to remark the collaboration of the Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas, CIEMAT, in the preparation of specific experiments of great importance in the development of the work. These collaborations have been developed within the framework of various projects such as the PSE-MICROSIL08 (PSE-120000-2006-6), the project INNDISOL (IPT-420000-2010-6), both funded by the Fondo Europeo de Desarrollo Regional FEDER (UE) “Una manera de hacer Europa” and the MICINN, and the project AMIC (ENE2010-21384-C04-02), whose funding has largely allowed to complete this work.
Resumo:
Global demand for mobility is increasing and the environmental impact of transport has become an important issue in transportation network planning and decision-making, as well as in the operational management phase. Suitable methods are required to assess emissions and fuel consumption reduction strategies that seek to improve energy efficiency and furthering decarbonization. This study describes the development and application of an improved modeling framework – the HERA (Highway EneRgy Assessment) methodology – that enables to assess the energy and carbon footprint of different highways and traffic flow scenarios and their comparison. HERA incorporates an average speed consumption model adjusted with a correction factor which takes into account the road gradient. It provides a more comprehensive method for estimating the footprint of particular highway segments under specific traffic conditions. It includes the application of the methodology to the Spanish highway network to validate it. Finally, a case study shows the benefits from using this methodology and how to integrate the objective of carbon footprint reductions into highway design, operation and scenario comparison.