Contribution to the improvement of communication services in nanosatellite constellations using delay and disruption tolerant networking based architectures

Esta tesis se desarrolla dentro del marco de las comunicaciones satelitales en el innovador campo de los pequeños satélites también llamados nanosatélites o cubesats, llamados así por su forma cubica. Estos nanosatélites se caracterizan por su bajo costo debido a que usan componentes comerciales llamados COTS (commercial off-the-shelf) y su pequeño tamaño como los Cubesats 1U (10cm*10 cm*10 cm) con masa aproximada a 1 kg. Este trabajo de tesis tiene como base una iniciativa propuesta por el autor de la tesis para poner en órbita el primer satélite peruano en mi país llamado chasqui I, actualmente puesto en órbita desde la Estación Espacial Internacional. La experiencia de este trabajo de investigación me llevo a proponer una constelación de pequeños satélites llamada Waposat para dar servicio de monitoreo de sensores de calidad de agua a nivel global, escenario que es usado en esta tesis. Es ente entorno y dadas las características limitadas de los pequeños satélites, tanto en potencia como en velocidad de datos, es que propongo investigar una nueva arquitectura de comunicaciones que permita resolver en forma óptima la problemática planteada por los nanosatélites en órbita LEO debido a su carácter disruptivo en sus comunicaciones poniendo énfasis en las capas de enlace y aplicación. Esta tesis presenta y evalúa una nueva arquitectura de comunicaciones para proveer servicio a una red de sensores terrestres usando una solución basada en DTN (Delay/Disruption Tolerant Networking) para comunicaciones espaciales. Adicionalmente, propongo un nuevo protocolo de acceso múltiple que usa una extensión del protocolo ALOHA no ranurado, el cual toma en cuenta la prioridad del trafico del Gateway (ALOHAGP) con un mecanismo de contienda adaptativo. Utiliza la realimentación del satélite para implementar el control de la congestión y adapta dinámicamente el rendimiento efectivo del canal de una manera óptima. Asumimos un modelo de población de sensores finito y una condición de tráfico saturado en el que cada sensor tiene siempre tramas que transmitir. El desempeño de la red se evaluó en términos de rendimiento efectivo, retardo y la equidad del sistema. Además, se ha definido una capa de convergencia DTN (ALOHAGP-CL) como un subconjunto del estándar TCP-CL (Transmission Control Protocol-Convergency Layer). Esta tesis muestra que ALOHAGP/CL soporta adecuadamente el escenario DTN propuesto, sobre todo cuando se utiliza la fragmentación reactiva. Finalmente, esta tesis investiga una transferencia óptima de mensajes DTN (Bundles) utilizando estrategias de fragmentación proactivas para dar servicio a una red de sensores terrestres utilizando un enlace de comunicaciones satelitales que utiliza el mecanismo de acceso múltiple con prioridad en el tráfico de enlace descendente (ALOHAGP). El rendimiento efectivo ha sido optimizado mediante la adaptación de los parámetros del protocolo como una función del número actual de los sensores activos recibidos desde el satélite. También, actualmente no existe un método para advertir o negociar el tamaño máximo de un “bundle” que puede ser aceptado por un agente DTN “bundle” en las comunicaciones por satélite tanto para el almacenamiento y la entrega, por lo que los “bundles” que son demasiado grandes son eliminados o demasiado pequeños son ineficientes. He caracterizado este tipo de escenario obteniendo una distribución de probabilidad de la llegada de tramas al nanosatélite así como una distribución de probabilidad del tiempo de visibilidad del nanosatélite, los cuales proveen una fragmentación proactiva óptima de los DTN “bundles”. He encontrado que el rendimiento efectivo (goodput) de la fragmentación proactiva alcanza un valor ligeramente inferior al de la fragmentación reactiva. Esta contribución permite utilizar la fragmentación activa de forma óptima con todas sus ventajas tales como permitir implantar el modelo de seguridad de DTN y la simplicidad al implementarlo en equipos con muchas limitaciones de CPU y memoria. La implementación de estas contribuciones se han contemplado inicialmente como parte de la carga útil del nanosatélite QBito, que forma parte de la constelación de 50 nanosatélites que se está llevando a cabo dentro del proyecto QB50. ABSTRACT This thesis is developed within the framework of satellite communications in the innovative field of small satellites also known as nanosatellites (<10 kg) or CubeSats, so called from their cubic form. These nanosatellites are characterized by their low cost because they use commercial components called COTS (commercial off-the-shelf), and their small size and mass, such as 1U Cubesats (10cm * 10cm * 10cm) with approximately 1 kg mass. This thesis is based on a proposal made by the author of the thesis to put into orbit the first Peruvian satellite in his country called Chasqui I, which was successfully launched into orbit from the International Space Station in 2014. The experience of this research work led me to propose a constellation of small satellites named Waposat to provide water quality monitoring sensors worldwide, scenario that is used in this thesis. In this scenario and given the limited features of nanosatellites, both power and data rate, I propose to investigate a new communications architecture that allows solving in an optimal manner the problems of nanosatellites in orbit LEO due to the disruptive nature of their communications by putting emphasis on the link and application layers. This thesis presents and evaluates a new communications architecture to provide services to terrestrial sensor networks using a space Delay/Disruption Tolerant Networking (DTN) based solution. In addition, I propose a new multiple access mechanism protocol based on extended unslotted ALOHA that takes into account the priority of gateway traffic, which we call ALOHA multiple access with gateway priority (ALOHAGP) with an adaptive contention mechanism. It uses satellite feedback to implement the congestion control, and to dynamically adapt the channel effective throughput in an optimal way. We assume a finite sensor population model and a saturated traffic condition where every sensor always has frames to transmit. The performance was evaluated in terms of effective throughput, delay and system fairness. In addition, a DTN convergence layer (ALOHAGP-CL) has been defined as a subset of the standard TCP-CL (Transmission Control Protocol-Convergence Layer). This thesis reveals that ALOHAGP/CL adequately supports the proposed DTN scenario, mainly when reactive fragmentation is used. Finally, this thesis investigates an optimal DTN message (bundles) transfer using proactive fragmentation strategies to give service to a ground sensor network using a nanosatellite communications link which uses a multi-access mechanism with priority in downlink traffic (ALOHAGP). The effective throughput has been optimized by adapting the protocol parameters as a function of the current number of active sensors received from satellite. Also, there is currently no method for advertising or negotiating the maximum size of a bundle which can be accepted by a bundle agent in satellite communications for storage and delivery, so that bundles which are too large can be dropped or which are too small are inefficient. We have characterized this kind of scenario obtaining a probability distribution for frame arrivals to nanosatellite and visibility time distribution that provide an optimal proactive fragmentation of DTN bundles. We have found that the proactive effective throughput (goodput) reaches a value slightly lower than reactive fragmentation approach. This contribution allows to use the proactive fragmentation optimally with all its advantages such as the incorporation of the security model of DTN and simplicity in protocol implementation for computers with many CPU and memory limitations. The implementation of these contributions was initially contemplated as part of the payload of the nanosatellite QBito, which is part of the constellation of 50 nanosatellites envisaged under the QB50 project.

Resilient Wireless Sensor Networks Using Topology Control: A Review

Wireless sensor networks (WSNs) may be deployed in failure-prone environments, and WSNs nodes easily fail due to unreliable wireless connections, malicious attacks and resource-constrained features. Nevertheless, if WSNs can tolerate at most losing k − 1 nodes while the rest of nodes remain connected, the network is called k − connected. k is one of the most important indicators for WSNs’ self-healing capability. Following a WSN design flow, this paper surveys resilience issues from the topology control and multi-path routing point of view. This paper provides a discussion on transmission and failure models, which have an important impact on research results. Afterwards, this paper reviews theoretical results and representative topology control approaches to guarantee WSNs to be k − connected at three different network deployment stages: pre-deployment, post-deployment and re-deployment. Multi-path routing protocols are discussed, and many NP-complete or NP-hard problems regarding topology control are identified. The challenging open issues are discussed at the end. This paper can serve as a guideline to design resilient WSNs.

A Wireless Charging System Applying Phase-Shift and Amplitude Control to Maximize Efficiency and Extractable Power

Wireless power transfer (WPT) is an emerging technology with an increasing number of potential applications to transfer power from a transmitter to a mobile receiver over a relatively large air gap. However, its widespread application is hampered due to the relatively low efficiency of current Wireless power transfer (WPT) systems. This study presents a concept to maximize the efficiency as well as to increase the amount of extractable power of a WPT system operating in nonresonant operation. The proposed method is based on actively modifying the equivalent secondary-side load impedance by controlling the phase-shift of the active rectifier and its output voltage level. The presented hardware prototype represents a complete wireless charging system, including a dc-dc converter which is used to charge a battery at the output of the system. Experimental results are shown for the proposed concept in comparison to a conventional synchronous rectification approach. The presented optimization method clearly outperforms state-of-the-art solutions in terms of efficiency and extractable power.

Diseño de un sistema networking audio para instalación audiovisual

Una vez presentada la tecnología de Networking audio (redes de datos, protocolos actuales, etc.) se realizará un diseño de la instalación del sistema de audio, en el que el punto de partida es la parte creativa de la actividad en dicha instalación: un juego en el que la comunicación auditiva es lo fundamental. La instalación se compondrá de una sala central, tres salas de grupos, tres salas de cabinas de actores y ocho salas de pasaje. Esta actividad tan particular hará plantearse configuraciones, equipamiento y formas de trabajar especiales que, mediante la tecnología de audio vía red de datos y el equipamiento auxiliar a esta red, podría realizarse de la una forma óptima cumpliendo con todos los objetivos de la actividad, tanto técnicos como relativos al juego. El libro se dividirá en dos partes: La primera parte consistirá en una explicación de lo que son las redes de datos y los aspectos básicos para entenderlas desde un punto de vista práctico: qué es Ethernet, los componentes de una red... Una vez explicada la terminología específica de redes, se expondrán los protocolos que se usan para transmitir audio profesional a día de hoy. En la segunda parte, se empezará presentando la actividad que se realizará en nuestra instalación: un juego de rol. A continuación se conocerá el flujo de señales existentes para después, poner en práctica lo aprendido en la primera parte: diseñaremos una instalación audiovisual mediante networking audio. Un sistema de estas características necesita además de dispositivos en red, sistemas convencionales de audio. Durante el diseño y debido a las necesidades tan específicas de la instalación, se verá que ha sido necesario pensar en sistemas especiales para hacer posible la actividad para la que ha sido ideada nuestra instalación. Los objetivos de este proyecto son, desarrollar los puntos que tendría que tener en cuenta un integrador que se proponga diseñar un sistema de audio networking para una instalación audiovisual para, a continuación, poner en práctica estos conocimientos con la exposición del diseño de una instalación en la que se llevará a cabo una actividad lúdica y de aprendizaje en la que una óptima transmisión de señal de audio a tiempo real, es lo fundamental. ABSTRACT. Once introduced the Networking technology (data networks, current protocols, etc.), the audio installation design is being done. In which the starting point is the creative part of the activity will be made: one game in which the auditory communication is fundamental. The installation will consist of a central room, three meeting groups, three actor cabins rooms and eight passage rooms. This particular activity will consider configurations, equipment and forms of special working that through audio technology via data network and auxiliary equipment to this network, it could be done in an optimal way to meet all the goals of the activity, both technical and relative to the game. The book is divided into two parts: The first part consists of an explanation of what the data networks and the basics to understand from a practical point of view: what Ethernet is, the network components... Once specific network terminology is explained, the current protocols used to transmit professional audio are being showed. In the second part, it is introducing the activity to be made in our installation: a game. Then, the flow of existing signals are being known, we practice what I learned in the first part: we will design an audiovisual installation by audio networking. A system like this besides networked devices, it needs conventional audio systems. During the design and due to the very specific needs of the installation, you will see that it was necessary to think of special systems for this special activity. The goals of this project are to develop the points that an system integrator would have to consider to design a system of networking audio for an audiovisual installation, then put this knowledge into practice with the installation design where it will take place a fun and learning activity in which an optimal transmission of audio signal in real time, is basic.

Multiple feature points representation in target localization of wireless visual sensor networks

This paper discusses the target localization problem in wireless visual sensor networks. Additive noises and measurement errors will affect the accuracy of target localization when the visual nodes are equipped with low-resolution cameras. In the goal of improving the accuracy of target localization without prior knowledge of the target, each node extracts multiple feature points from images to represent the target at the sensor node level. A statistical method is presented to match the most correlated feature point pair for merging the position information of different sensor nodes at the base station. Besides, in the case that more than one target exists in the field of interest, a scheme for locating multiple targets is provided. Simulation results show that, our proposed method has desirable performance in improving the accuracy of locating single target or multiple targets. Results also show that the proposed method has a better trade-off between camera node usage and localization accuracy.

Innovative education networking aimed at multimedia tools for geometrical optics learning

We present a purposeful initiative to open new grounds for teaching Geometrical Optics. It is based on the creation of an innovative education networking involving academic staff from three Spanish universities linked together around Optics. Nowadays, students demand online resources such as innovative multimedia tools for complementing the understanding of their studies. Geometrical Optics relies on basics of light phenomena like reflection and refraction and the use of simple optical elements such as mirrors, prisms, lenses, and fibers. The mathematical treatment is simple and the equations are not too complicated. But from our long time experience in teaching to undergraduate students, we realize that important concepts are missed by these students because they do not work ray tracing as they should do. Moreover, Geometrical Optics laboratory is crucial by providing many short Optics experiments and thus stimulating students interest in the study of such a topic. Multimedia applications help teachers to cover those student demands. In that sense, our educational networking shares and develops online materials based on 1) video-tutorials of laboratory experiences and of ray tracing exercises, 2) different online platforms for student self-examinations and 3) computer assisted geometrical optics exercises. That will result in interesting educational synergies and promote student autonomy for learning Optics.

MOOCs, Open educational resources and social networking: bridging the gap between informal and formal learning

MOOCs and open educational resources (OER) provide a wealth of learning opportunities for people around the globe, many of whom have no access to formal higher education. OER are often difficult to locate and are accessed on their own without support from or dialogue with subject experts and peers. This paper looks at whether it is possible to develop effective learning communities around OER and whether these communities can emerge spontaneously and in a self-organised way without moderation. It examines the complex interplay between formal and informal learning, and examines whether MOOCs are the answer to providing effective interaction and dialogue for those wishing to study at university level for free on the Internet.

Potential sites for wireless telecommunications facilities

created by the Cape Cod Commission's geographic information systems department.

Projeto de uma antena para controlo wireless de um robot

A comunicação e transmissão de informação sem fios tornou - se uma realidade cada vez mais utilizada pelas sociedades contemporâneas. A nível profissional, as forças armadas de cada país acharam conveniente modernizar os seus meios, por forma a aumentar a eficiência e a segurança em determinadas tarefas. Nesse sentido, o Exército português adquiriu um robot (ROVIM) cuja função é desempenhar ações de reconhecimento e vigilância de modo a obter informações de forma segura. O objetivo desta dissertação é dimensionar e construir uma antena para controlo wireless do robot (ROVIM). As especificações técnicas desta antena requerem dois modos de operação, um com uma largura de feixe larga e outro com uma largura de feixe estreita. Para alcançar esses objetivos dimensionou-se e construiu-se duas antenas. Na dissertação são construídas duas antenas, a primeira é uma antena Yagi – Uda convencional e a segunda é uma antena com uma estrutura nova que permite a regulação do ganho e da largura de feixe a -3 dB. A primeira antena será o modelo base da segunda antena, que apresenta a inovação do controlo das caraterísticas de radiação. Esse controlo é possível através da introdução de díodos e do respetivo circuito de polarização na estrutura da antena. Inicialmente, as antenas foram dimensionadas e simuladas recorrendo ao programa de simulação CST MWS, de modo a operarem na banda dos 2,4 GHz. Após a construção das antenas, as caraterísticas de radiação foram medidas recorrendo à câmara anecoica e ao network analyzer, permitindo assim a comparação dos resultados medidos com os simulados.