Quinupristin-dalfopristin combined with beta-lactams for treatment of experimental endocarditis due to Staphylococcus aureus constitutively resistant to macrolide-lincosamide-streptogramin B antibiotics.

Quinupristin-dalfopristin (Q-D) is an injectable streptogramin active against most gram-positive pathogens, including methicillin-resistant Staphylococcus aureus (MRSA). In experimental endocarditis, however, Q-D was less efficacious against MRSA isolates constitutively resistant to macrolide-lincosamide-streptogram B (C-MLS(B)) than against MLS(B)-susceptible isolates. To circumvent this problem, we used the checkerboard method to screen drug combinations that would increase the efficacy of Q-D against such bacteria. beta-Lactams consistently exhibited additive or synergistic activity with Q-D. Glycopeptides, quinolones, and aminoglycosides were indifferent. No drugs were antagonistic. The positive Q-D-beta-lactam interaction was independent of MLS(B) or beta-lactam resistance. Moreover, addition of Q-D at one-fourth the MIC to flucloxacillin-containing plates decreased the flucloxacillin MIC for MRSA from 500 to 1,000 mg/liter to 30 to 60 mg/liter. Yet, Q-D-beta-lactam combinations were not synergistic in bactericidal tests. Rats with aortic vegetations were infected with two C-MLS(B)-resistant MRSA isolates (isolates AW7 and P8) and were treated for 3 or 5 days with drug dosages simulating the following treatments in humans: (i) Q-D at 7 mg/kg two times a day (b.i.d.) (a relatively low dosage purposely used to help detect positive drug interactions), (ii) cefamandole at constant levels in serum of 30 mg/liter, (iii) cefepime at 2 g b.i.d., (iv) Q-D combined with either cefamandole or cefepime. Any of the drugs used alone resulted in treatment failure. In contrast, Q-D plus either cefamandole or cefepime significantly decreased valve infection compared to the levels of infection for both untreated controls and those that received monotherapy (P < 0.05). Importantly, Q-D prevented the growth of highly beta-lactam-resistant MRSA in vivo. The mechanism of this beneficial drug interaction is unknown. However, Q-D-beta-lactam combinations might be useful for the treatment of complicated infections caused by multiple organisms, including MRSA.

Usefulness of betalactam therapy for community-acquired pneumonia in the era of drug-resistant Streptococcus pneumoniae: a randomized study of amoxicillin-clavulanate and ceftriaxone

Empirical antibiotic therapy of community-acquired pneumonia (CAP) has been complicated by the worldwide emergence of penicillin resistance among Streptococcus pneumoniae. The impact of this resistance on the outcome of patients hospitalized for CAP, empirically treated with betalactams, has not been evaluated in a randomized study. We conducted a prospective, randomized trial to assess the efficacy of amoxicillin-clavulanate (2 g/200 mg/8 hr) and ceftriaxone (1 g/24 hr) in a cohort of patients hospitalized for moderate-to-severe CAP. Three-hundred seventy-eight patients were randomized to receive amoxicillin-clavulanate (184 patients) or ceftriaxone (194 patients). Efficacy was assessed on Day 2, after completion of therapy and at long term follow-up. There were no significant differences in outcomes between treatment groups, both in intention-to-treat and per-protocol analysis. Overall mortality was 10.3% for amoxicillin-clavulanate and 8.8% for ceftriaxone (NS). There were 116 evaluable patients with proven pneumococcal pneumonia. Rates of high-level penicillin resistance (MIC of penicillin ≥2 µg/mL) were similar in the two groups (8.2 and 10.2%). Clinical efficacy at the end of therapy was 90.6% for amoxicillin-clavulanate and 88.9% for ceftriaxone (95% C.I. of the difference: -9.3 to +12.7%). No differences in outcomes were attributable to differences in penicillin susceptibility of pneumococcal strains. Sequential i.v./oral amoxicillin-clavulanate and parenteral ceftriaxone were equally safe and effective for the empirical treatment of acute bacterial pneumonia, including penicillin and cephalosporin-resistant pneumococcal pneumonia. The use of appropriate betalactams in patients with penumococcal pneumonia and in the overall CAP population, is reliable at the current level of resistance

Experimental study of clinafloxacin alone and in combination in the treatment of ciprofloxacin-susceptible and -resistant pneumococcal meningitis

The increasing incidence of ciprofloxacin resistance in Streptococcus pneumoniae may limit the efficacy of the new quinolones in difficult-to-treat infections such as meningitis. The aim of the present study was to determine the efficacy of clinafloxacin alone and in combination with teicoplanin and rifampin in the therapy of ciprofloxacin-susceptible and ciprofloxacin-resistant pneumococcal meningitis in rabbits. When used against a penicillin-resistant ciprofloxacin-susceptible strain (Clinafloxacin MIC 0.12 μg/ml), clinafloxacin at a dose of 20 mg/kg per day b.i.d. decreased bacterial concentration by -5.10 log cfu/ml at 24 hr. Combinations did not improve activity. The same clinafloxacin schedule against a penicillin- and ciprofloxacin-resistant strain (Clinafloxacin MIC 0.5 μg/ml) was totally ineffective. Our data suggest that a moderate decrease in quinolone susceptibility, as indicated by the detection of any degree of ciprofloxacin resistance, may render these antibiotics unsuitable for the management of pneumococcal meningitis

A novel procedure for establishing clinching parameters for high strength steel sheet

The building industry has a particular interest in using clinching as a joining method for frame constructions of light-frame housing. Normally many clinch joints are required in joining of frames.In order to maximise the strength of the complete assembly, each clinch joint must be as sound as possible. Experimental testing is the main means of optimising a particular clinch joint. This includes shear strength testing and visual observation of joint cross-sections. The manufacturers of clinching equipment normally perform such experimental trials. Finite element analysis can also be used to optimise the tool geometry and the process parameter, X, which represents the thickness of the base of the joint. However, such procedures require dedicated software, a skilled operator, and test specimens in order to verify the finite element model. In addition, when using current technology several hours' computing time may be necessary. The objective of the study was to develop a simple calculation procedure for rapidly establishing an optimum value for the parameter X for a given tool combination. It should be possible to use the procedure on a daily basis, without stringent demands on the skill of the operator or the equipment. It is also desirable that the procedure would significantly decrease thenumber of shear strength tests required for verification. The experimental workinvolved tests in order to obtain an understanding of the behaviour of the sheets during clinching. The most notable observation concerned the stage of the process in which the upper sheet was initially bent, after which the deformation mechanism changed to shearing and elongation. The amount of deformation was measured relative to the original location of the upper sheet, and characterised as the C-measure. By understanding in detail the behaviour of the upper sheet, it waspossible to estimate a bending line function for the surface of the upper sheet. A procedure was developed, which makes it possible to estimate the process parameter X for each tool combination with a fixed die. The procedure is based on equating the volume of material on the punch side with the volume of the die. Detailed information concerning the behaviour of material on the punch side is required, assuming that the volume of die does not change during the process. The procedure was applied to shear strength testing of a sample material. The sample material was continuously hot-dip zinc-coated high-strength constructional steel,with a nominal thickness of 1.0 mm. The minimum Rp0.2 proof stress was 637 N/mm2. Such material has not yet been used extensively in light-frame housing, and little has been published on clinching of the material. The performance of the material is therefore of particular interest. Companies that use clinching on a daily basis stand to gain the greatest benefit from the procedure. By understanding the behaviour of sheets in different cases, it is possible to use data at an early stage for adjusting and optimising the process. In particular, the functionality of common tools can be increased since it is possible to characterise the complete range of existing tools. The study increases and broadens the amount ofbasic information concerning the clinching process. New approaches and points of view are presented and used for generating new knowledge.

Electromagnetic Design of a Solid Steel Rotor Motor for Demanding Operation Environments

The solid-rotor induction motor provides a mechanically and thermally reliable solution for demanding environments where other rotor solutions are prohibited or questionable. Solid rotors, which are manufactured of single pieces of ferromagnetic material, are commonly used in motors in which the rotationspeeds exceed substantially the conventional speeds of laminated rotors with squirrel-cage. During the operation of a solid-rotor electrical machine, the rotor core forms a conductor for both the magnetic flux and the electrical current. This causes an increase in the rotor resistance and rotor leakage inductance, which essentially decreases the power factor and the efficiency of the machine. The electromagnetic problems related to the solid-rotor induction motor are mostly associated with the low performance of the rotor. Therefore, the main emphasis in this thesis is put on the solid steel rotor designs. The rotor designs studied in thisthesis are based on the fact that the rotor construction should be extremely robust and reliable to withstand the high mechanical stresses caused by the rotational velocity of the rotor. In addition, the demanding operation environment sets requirements for the applied materials because of the high temperatures and oxidizing acids, which may be present in the cooling fluid. Therefore, the solid rotors analyzed in this thesis are made of a single piece of ferromagnetic material without any additional parts, such as copper end-rings or a squirrel-cage. A pure solid rotor construction is rigid and able to keep its balance over a large speed range. It also may tolerate other environmental stresses such as corroding substances or abrasive particles. In this thesis, the main target is to improve the performance of an induction motor equipped with a solid steel rotor by traditional methods: by axial slitting of the rotor, by selecting a proper rotor core material and by coating the rotor with a high-resistive stainless ferromagnetic material. In the solid steel rotor calculation, the rotor end-effects have a significant effect on the rotor characteristics. Thus, the emphasis is also put on the comparison of different rotor endfactors. In addition, a corrective slip-dependent end-factor is proposed. The rotor designs covered in this thesis are the smooth solid rotor, the axially slitted solid rotor and the slitted rotor having a uniform ferromagnetic coating cylinder. The thesis aims at design rules for multi-megawatt machines. Typically, mega-watt-size solidrotor machines find their applications mainly in the field of electric-motor-gas-compression systems, in steam-turbine applications, and in various types of largepower pump applications, where high operational speeds are required. In this thesis, a 120 kW, 10 000 rpm solid-rotor induction motor is usedas a small-scale model for such megawatt-range solid-rotor machines. The performance of the 120 kW solid-rotor induction motors is determined by experimental measurements and finite element calculations.

Automated formulation of optimisation models for steel beam structures

Over 70% of the total costs of an end product are consequences of decisions that are made during the design process. A search for optimal cross-sections will often have only a marginal effect on the amount of material used if the geometry of a structure is fixed and if the cross-sectional characteristics of its elements are property designed by conventional methods. In recent years, optimalgeometry has become a central area of research in the automated design of structures. It is generally accepted that no single optimisation algorithm is suitable for all engineering design problems. An appropriate algorithm, therefore, mustbe selected individually for each optimisation situation. Modelling is the mosttime consuming phase in the optimisation of steel and metal structures. In thisresearch, the goal was to develop a method and computer program, which reduces the modelling and optimisation time for structural design. The program needed anoptimisation algorithm that is suitable for various engineering design problems. Because Finite Element modelling is commonly used in the design of steel and metal structures, the interaction between a finite element tool and optimisation tool needed a practical solution. The developed method and computer programs were tested with standard optimisation tests and practical design optimisation cases. Three generations of computer programs are developed. The programs combine anoptimisation problem modelling tool and FE-modelling program using three alternate methdos. The modelling and optimisation was demonstrated in the design of a new boom construction and steel structures of flat and ridge roofs. This thesis demonstrates that the most time consuming modelling time is significantly reduced. Modelling errors are reduced and the results are more reliable. A new selection rule for the evolution algorithm, which eliminates the need for constraint weight factors is tested with optimisation cases of the steel structures that include hundreds of constraints. It is seen that the tested algorithm can be used nearly as a black box without parameter settings and penalty factors of the constraints.

A germination study of herbicide-resistant field poppies in Spain

Field poppy, Papaver rhoeas L., is a very common weed in winter cereals in North-Eastern Spain. Its control is becoming difficult due to expanding herbicide resistance. To control field poppies there are alternative strategies such as non-chemical control that take into account the weed emergence period. However, there is a lack of knowledge of P. rhoeas emergence patterns in semi-arid conditions. Thus, here we conducted pot experiments on the emergence of P. rhoeas. We aimed to describe the emergence period and to quantify the emergence of a susceptible and of a herbicide-resistant P. rhoeas population at two locations in Catalonia, Spain, from 1998 to 2001 and until 2004 at one of them. Therefore, pots containing seeds of both populations were established at the two locations and emergence was recorded monthly. We studied the origin of the population, the sowing location, the effect of cultivation and the sowing year. First, we found that the main emergence peaks in our experiments occurred in autumn, accounting for between 65.7 and 98.5% of the annual emergence from October to December, and only little emergence was recorded in spring. This emergence pattern is different from those found in the literature corresponding to Northern European countries, where in some cases main flushes occur only in autumn, in spring and winter or only in spring. The emergence was mainly affected by cultivation, but the effect of light stimulus was observed several months later. As a consequence, cultivation should be done in early autumn, promoting emergence during the whole autumn and winter so that emerged seedlings can be controlled before sowing a spring crop. Second, most experiments showed that the emergence was significantly higher in the first autumn than in the following seasons, e.g. 4.1% emergence in the first year and only 2.1, 2.3, 0.5 and 0.6% new emergence at one of the locations for the second, third, fourth and fifth years. Thus, after having a severe P. rhoeas infestation causing a big seed rain, emergence should be stimulated by autumn cultivation in the following season and seedlings controlled by trying to deplete the soil seed bank as much as possible. Despite the fact that emergence will be staggered throughout several years and that there was a significant relationship between rainfall and emergence, so that dry years will cause a smaller emergence rate of the weed, these findings define a cultural management strategy to reduce P. rhoeas infestations and to contribute to integrated weed management strategies combining it with other tools.

Cultural control of herbicide-resistant Lolium rigidum Gaud. populations in winter cereal in Northeastern Spain

Lolium rigidum Gaud. is one of the most common weed species in winter cereals in Northeastern Spain. Herbicide resistance has been growing since the mid 90's and exclusive herbicide use is not enough in many cases, so that it is necessary to combine as many control tools as possible. Six field trials have been conducted during the cropping seasons 2001-02, 2002-03 and 2003-04 on winter cereal infested with herbicide resistant L. rigidum in Northeastern Spain testing different cultural control strategies. Sowing delay was conducted at five fields, mouldboard ploughing at four fields, the combination of sowing delay and ploughing at two fields, increasing the cereal sowing density and combined with sowing delay at one field. Sowing delay was confirmed to have an irregular efficacy depending on the L. rigidum emergence during the delay period. In the trials, weed emergence was reduced up to 88% in the best case but there was no effect in two cases. Ploughing had a more constant efficacy and reduced weed emergence between 50 and 80% although stoniness impeded in one occasion a correct soil inversion causing a very low efficacy. Increasing the cereal sowing rate did not reduce the weed population. The combination of the different methods did not increase significantly the individual efficacy, and one method was clearly more effective than the other, depending on the trial. In fields with high L. rigidum density, these methods are not effective enough and need to be combined with other methods, which are discussed in the text.

Hepatitis C virus variants resistant to macrocyclic NS3-4A inhibitors subvert IFN-β induction by efficient MAVS cleavage.

BACKGROUND & AIMS: The hepatitis C virus (HCV) NS3-4A protease is essential for the HCV life cycle and a prime target of antiviral treatment strategies. Protease inhibitors, however, are limited by emergence of resistance-associated amino acid variants (RAVs). The capacity to cleave and inactivate mitochondrial antiviral-signaling protein (MAVS) in the RIG-I-signaling pathway is a cardinal feature of NS3-4A, by which HCV blocks induction of interferon-(IFN)-β, thereby promoting viral persistence. Here, we aimed to investigate the impact of NS3-4A RAVs on MAVS cleavage. METHODS: The impact of NS3-4A RAVs on MAVS cleavage was assessed using immunoblot analyses, luciferase reporter assays and molecular dynamics simulations to study the underlying molecular principles. IFN-β was quantified in serum from patients with different NS3-4A RAVs. RESULTS: We show that macrocyclic NS3-4A RAVS with substitutions at residue D168 of the protease result in an increased capacity of NS3-4A to cleave MAVS and suppress IFN-β induction compared with a comprehensive panel of RAVs and wild type HCV. Mechanistically, we show the reconstitution of a tight network of electrostatic interactions between protease and the peptide substrate that allows much stronger binding of MAVS to D168 RAVs than to the wild-type protease. Accordingly, we could show IFN-β serum levels to be lower in patients with treatment failure due to the selection of D168 variants compared to R155 RAVs. CONCLUSIONS: Our data constitutes a proof of concept that the selection of RAVs against specific classes of direct antivirals can lead to the predominance of viral variants with possibly adverse pathogenic characteristics.

Physico-chemical characterization and oxidative reactivity evaluation of aged brake wear particles

Brake wear dust is a significant component of traffic emissions and has been linked to adverse health effects. Previous research found a strong oxidative stress response in cells exposed to freshly generated brake wear dust. We characterized aged dust collected from passenger vehicles, using microscopy and elemental analyses. Reactive oxygen species (ROS) generation was measured with acellular and cellular assays using 2′7-dichlorodihydrofluorescein dye. Microscopy analyses revealed samples to be heterogeneous particle mixtures with few nanoparticles detected. Several metals, primarily iron and copper, were identified. High oxygen concentrations suggested that the elements were oxidized. ROS were detected in the cell-free fluorescent test, while exposed cells were not dramatically activated by the concentrations used. The fact that aged brake wear samples have lower oxidative stress potential than fresh ones may relate to the highly oxidized or aged state of these particles, as well as their larger size and smaller reactive surface area.

Isolation and characterization of Saccharomyces cerevisiae mutants resistant to aculeacin A

Aculeacin A is a lipopeptide that inhibits ,B-glucan synthesis in yeasts. A number of Saccharomyces cerevisiae mutants resistant to this antibiotic were isolated, and four loci (ACRI, ACR2, ACR3, and ACR4) whose products are involved in the sensitivity to aculeacin A of yeast ceils were defined. Mutants containing mutations in the four loci were also resistant to echinocandin B, another member of this lipopeptide family of antibiotics. In contrast, acri, acr3, and acr4 mutants were resistant to papulacandin B (an antibiotic containing a disaccharide linked to two fatty acid chains that also inhibits P-glucan synthesis), but acr2 mutants were susceptible'to this antibiotic. This result defines common and specific steps in the entry and action of aculeacin A and papulacandin B. The analysis of double mutants revealed an epistatic effect of the acr2 mutation on the other three mutations. Cell walls of the four different mutants did not show significant alterations in composition with respect to the parental strain, and in vitro glucan synthase activity was also unaffected. However, cell surface hydrophobicity in three of the mutants was considerably decreased with respect to the parental strain.

Preventive and therapeutic strategies in critically ill patients with highly resistant bacteria.

The antibiotic pipeline continues to diminish and the majority of the public remains unaware of this critical situation. The cause of the decline of antibiotic development is multifactorial and currently most ICUs are confronted with the challenge of multidrug-resistant organisms. Antimicrobial multidrug resistance is expanding all over the world, with extreme and pandrug resistance being increasingly encountered, especially in healthcare-associated infections in large highly specialized hospitals. Antibiotic stewardship for critically ill patients translated into the implementation of specific guidelines, largely promoted by the Surviving Sepsis Campaign, targeted at education to optimize choice, dosage, and duration of antibiotics in order to improve outcomes and reduce the development of resistance. Inappropriate antimicrobial therapy, meaning the selection of an antibiotic to which the causative pathogen is resistant, is a consistent predictor of poor outcomes in septic patients. Therefore, pharmacokinetically/pharmacodynamically optimized dosing regimens should be given to all patients empirically and, once the pathogen and susceptibility are known, local stewardship practices may be employed on the basis of clinical response to redefine an appropriate regimen for the patient. This review will focus on the most severely ill patients, for whom substantial progress in organ support along with diagnostic and therapeutic strategies markedly increased the risk of nosocomial infections.

Coexistence of protease sensitive and resistant prion protein in 129VV homozygous sporadic Creutzfeldt-Jakob disease: a case report

Introduction: The coexistence of different molecular types of classical protease-resistant prion protein in the same individual have been described, however, the simultaneous finding of these with the recently described protease-sensitive variant or variably protease-sensitive prionopathy has, to the best of our knowledge, not yet been reported. Case presentation: A 74-year-old Caucasian woman showed a sporadic Creutzfeldt-Jakob disease clinical phenotype with reactive depression, followed by cognitive impairment, akinetic-rigid Parkinsonism with pseudobulbar syndrome and gait impairment with motor apraxia, visuospatial disorientation, and evident frontal dysfunction features such as grasping, palmomental reflex and brisk perioral reflexes. She died at age 77. Neuropathological findings showed: spongiform change in the patient"s cerebral cortex, striatum, thalamus and molecular layer of the cerebellum with proteinase K-sensitive synaptic-like, dot-like or target-like prion protein deposition in the cortex, thalamus and striatum; proteinase K-resistant prion protein in the same regions; and elongated plaque-like proteinase K-resistant prion protein in the molecular layer of the cerebellum. Molecular analysis of prion protein after proteinase K digestion revealed decreased signal intensity in immunoblot, a ladder-like protein pattern, and a 71% reduction of PrPSc signal relative to non-digested material. Her cerebellum showed a 2A prion protein type largely resistant to proteinase K. Genotype of polymorphism at codon 129 was valine homozygous. Conclusion: Molecular typing of prion protein along with clinical and neuropathological data revealed, to the best of our knowledge, the first case of the coexistence of different protease-sensitive prion proteins in the same patient in a rare case that did not fulfill the current clinical diagnostic criteria for either probable or possible sporadic Creutzfeldt-Jakob disease. This highlights the importance of molecular analyses of several brain regions in order to correctly diagnose rare and atypical prionopathies