Trigger and data link system for CMS Resistive Plate Chambers at the LHC accelerator

The purpose of the work was to realize a high-speed digital data transfer system for RPC muon chambers in the CMS experiment on CERN’s new LHC accelerator. This large scale system took many years and many stages of prototyping to develop, and required the participation of tens of people. The system interfaces to Frontend Boards (FEB) at the 200,000-channel detector and to the trigger and readout electronics in the control room of the experiment. The distance between these two is about 80 metres and the speed required for the optic links was pushing the limits of available technology when the project was started. Here, as in many other aspects of the design, it was assumed that the features of readily available commercial components would develop in the course of the design work, just as they did. By choosing a high speed it was possible to multiplex the data from some the chambers into the same fibres to reduce the number of links needed. Further reduction was achieved by employing zero suppression and data compression, and a total of only 660 optical links were needed. Another requirement, which conflicted somewhat with choosing the components a late as possible was that the design needed to be radiation tolerant to an ionizing dose of 100 Gy and to a have a moderate tolerance to Single Event Effects (SEEs). This required some radiation test campaigns, and eventually led to ASICs being chosen for some of the critical parts. The system was made to be as reconfigurable as possible. The reconfiguration needs to be done from a distance as the electronics is not accessible except for some short and rare service breaks once the accelerator starts running. Therefore reconfigurable logic is extensively used, and the firmware development for the FPGAs constituted a sizable part of the work. Some special techniques needed to be used there too, to achieve the required radiation tolerance. The system has been demonstrated to work in several laboratory and beam tests, and now we are waiting to see it in action when the LHC will start running in the autumn 2008.

[1er mai 1920 à Paris, un receveur volontaire encadré par des gendarmes sur la plate-forme d'un autobus] : [photographie de presse] / [Agence Rol]

Référence bibliographique : Rol, 59111

Sediment genotoxicity and its relationship to the frequency of chironomid labial plate deformities

Sediment samples were taken from seven locations in the WeIland River in December 1986 and April 1987. The DMSO extracts of these sediment samples showed a significant (pplate deformities (over 1000 individual specimens were observed) . The samples from station D-l showed the highest frequency of chironomid labial plate deformities (10 . 9% ± 3.2%), while samples from the upstream control (station A) displayed t,he lowest frequency of deformities (3.8% ± 1.3%). All samples were coded to avoid unconscious biases . The results of the genotoxicity study indicated that station D-l in the WeIland River was contaminated with genotoxic materials. The genotoxic materials may have induced the observed increased frequency in chironomid labial plate deformities . Samples from stations C and D-l, located in a downstream portion of the river bounded by an industrialized area were slightly toxic according to -the alkaline phosphatase inhib_ii~ion component of the 50S chromotest analyses. The toxicity of these samples was only evident once they had been activated by the 59 (liver extract) mixture.

La plate-forme multifonctionnelle de lutte contre la pauvreté au Mali est-elle économiquement rentable?

Rapport de recherche

Synthèse totale de la lépadine B : plate-forme pour la découverte de nouvelles tranformations chimiques

Dans ce document, serons détaillées les résultats de mes travaux de recherche d’études doctorales. Tout d’abord, nous discuterons de la synthèse totale de la lépadine B, la plus courte à paraître dans la littérature à ce jour. Cette synthèse, en plus de valoriser la synthèse asymétrique de pipéridines poly-substituées développée par l’équipe du professeur Charette, mettra à profit une utilisation originale d’une séquence de fermeture-ouverture de cycle par la réaction de métathèse d’alcènes. De plus, nous détaillerons une brève étude mécanistique de cette dernière nous ayant permis la proposition d’un mécanisme peu commun de ce type de séquence réactionnel et dont les conséquences expérimentales sont impressionnantes. Au cours de cette synthèse, nous avons identifié un synthon d’une grande valeur synthétique. En effet, ne comportant pas moins que quatre centres chiraux, ce synthon pouvait être obtenu énantiopure en seulement trois étapes à partir de la pyridine. Ainsi, nous avons effectué une analyse structurale de ce synthon et avons envisagé une valorisation supplémentaire par une utilisation originale de la fragmentation de Grob. Dans ce contexte, nous avons développé une toute nouvelle synthèse de pipéridines 2,3,6-trisubstituées hautement régio- et diastéréosélective. Afin de pouvoir réaliser la précédente méthodologie, nous avons dû étudier la réduction d’une amide en présence de groupements fonctionnels sensibles dans les conditions usuelles. Heureusement, l’année précédente nous avions développée une réaction hautement chimiosélective d’amides tertaires. Cette nouvelle réaction, qui a été fondamentalement inspiré par une méthodologie du professeur Charette sur l’activation d’amides, a permis la réduction d’amides tertiaires en présence de fonctions telles les cétone, ester, nitrile, époxyde, insaturations, etc. Enfin, l’ensemble des connaissances acquises au cours de ces projets a permis l’élaboration d’une toute nouvelle stratégie de synthèse pour la préparation d’indolizidines et quinolizidines. Plus spécifiquement, nous avons développé la première séquence d’activation intramoléculaire et déaromatization asymétrique de la pyridine. Ceci permet d’avoir un accès aux squelettes indolizidine et quinolizidine avec des stéréosélectivités élevées, la nature insaturée de ces derniers laissant également place à une grande flexibilité synthétique. Dans ce contexte, nous allons détailler une très courte synthèse de trans-indolizidines.

INVESTIGATIONS ON THE RECOVERY OF TITANIUM VANADIUM AND IRON VALUES FROM THE WASTE CHILORIDE LIQUORS OF TITANIA INDUSTRY

The thesis entitled INVESTIDGATIONS ON THE RECOVERY OF TITANIUM VANADIUM AND IRON VALUES FROM THE WASTE CHILORIDE LIQUORS OF TITANIA INDUSTRY embodies the results of the investigations carried out on the solvent extraction separation of iron (III) vanadium(V) and titanium (IV) chlorides from the waste chloride liquors of titanium minerals processing industry by employing tributylphosphate (TBT) as an extractant. The objective of this study is to generate the knowledge base to achieve the recovery of iron, vanadium and titanium cvalues from multi- metal waste chloride liquors originating from ilmenite mineral beneficiation industries through selective separation and value added material development

Toxicity of Effluent from a Titanium Dioxide Factory on some Marine Animals

Toxicity of effluent from a titanium dioxide factory containing sulphuric acid residue with soluble iron metallic salts and insoluble material such as silica, etc. on fishes, decapods and molluscs was studied. The effluent caused changes in pH and oxygen depletion of the sea water. Sublethal effects of the precipitate of ferrous salts were also studied. Dilutions of effluent up to 1:150 were LC100 for all organisms used while 1:200 dilution was LC50 for fishes at 36 hr and for other organisms at 48 hr. But death of organisms at this concentration was caused by pH changes and oxygen depletion and did not account for the effects of the precipitate. Below this level precipitation started soon after mixing with sea water causing death of organisms by choking their gills and siphons. Dilutions,< 1:1000 were 96 hr LCO.

Spectral Characterization of Laser Induced Plasma from Titanium Dioxide

Optical emission from TiO2 plasma, generated by a nanosecond laser is spectroscopically analysed. The main chemical species are identified and the spatio-temporal distribution of the plasma parameters such as electron temperature and density are characterized based on the study of spectral distribution of the line intensities and their broadening characteristics. The parameters of laser induced plasma vary quickly owing to its expansion at low background pressure and the possible deviations from local thermodynamic equilibrium conditions are tested to show its validity.