922 resultados para three stages of stress relaxation
Resumo:
INTRODUCTION: Biological age is an important parameter for growth and development assessment. It can be evaluated through the observation of radiographic changes in skeletal maturation of cervical vertebrae. OBJECTIVE: This study aims to: a) verify if there is correlation between growth curve and the stages of bone age of animals used in laboratories, by evaluating radiographs of the cervical vertebrae; b) correlate these stages with their correspondents in humans. METHODS: 35 Wistar rats were evaluated for a period of 160 days, starting at day 22nd (weaning), with cross sections for periodic weighing, length measurement and digital radiography. Radiographs of the cervical vertebrae (C2 and C3) were measured by means of a computer program (Radio IMP). Data were submitted to statistical analysis (ANOVA) and Pearson correlation. RESULTS: Growth spurt was characterized by fast increasing in weight and length. Through ANOVA, differences were observed in the cervical measurements between days 22, 97, 127, 157, 187 and 217 (p <0.001). A high correlation was found between increasing in body length and weight, as well as in cervical vertebrae height (r = 0.86). Increments in concavities of vertebrae were also observed, similar to humans. CONCLUSIONS: There is correlation between body growth and maturation of cervical vertebrae in rats. Despite the continuous development of concavities, it was not possible to clearly identify the 5/6 stages as in studies of cervical vertebrae maturation in humans.
Resumo:
The outdoor cultivation (ditches) of Agaricus blazei was evaluated in the protected natural area (APA) of the mountainous region of Baturité on three types of casing soils (A, B and C). Casing soil A (horizon A) of the local soil was used (Alfisol). Casing B was obtained with a mixture of 30% of eucalyptus charcoal (1-2 cm of length) and 70% of horizon B of the local soil. Casing C was composed of 25% of vermiculite, 25% of coconut fiber and 50% of coarse sand. Temperature, relative humidity and pluviometric rates were monitored. The physical-chemical properties of the three casing soils were analyzed. The effect of the casing soil on the number and weight of the mushrooms, productivity, yield and biological efficiency of A. blazei were evaluated. The yield, productivity, biological efficiency and number of mushrooms were higher when using soil A. The highest productivity for soil A was attributed mainly to the physical characteristics, which were considered more appropriate for the cultivation, in addition to the high pluviometric rates and relative humidity. The productivity with soil A (9.62%) is comparable with the average productivity obtained in Brazil, meaning that the cultivation of A. blazei in this APA may have good perspectives for cultivation.
Resumo:
Purpose of reviewTo critically discuss the neuropsychiatric symptoms in the prodromal stages of dementia in order to improve the early clinical diagnosis of cognitive and functional deterioration.Recent findingsCurrent criteria for cognitive syndrome, including Alzheimer's disease, comprise the neuropsychiatric symptoms in addition to cognitive and functional decline. Although there is growing evidence that neuropsychiatric symptoms may precede the prodromal stages of dementia, these manifestations have received less attention than traditional clinical hallmarks such as cognitive and functional deterioration. Depression, anxiety, apathy, irritability, agitation, sleep disorders, among other symptoms, have been hypothesized to represent a prodromal stage of dementia or, at least, they increase the risk for conversion from minor neurocognitive disorder to major neurocognitive disorder. Longitudinal investigations have provided increased evidence of progression to dementia in individuals with minor neurocognitive disorder when neuropsychiatric symptoms also were present.SummaryAlthough neuropsychiatric symptoms are strongly associated with a higher risk of cognitive and functional deterioration, frequently the clinician does not acknowledge these conditions as increasing the risk of dementia. When the clinician accurately diagnoses neuropsychiatric symptoms in the prodromal stage of dementia, he could early establish appropriate treatment and, may be, delay the beginning of clinical and functional deterioration.
Resumo:
A low rate of physical activity (PA) participation is observed worldwide. The identification of feasible and reliable instruments able to accurately measuring PA and help in the development of interventions to promote PA are necessary. This study aimed to analyze the concordance between the Stages of Behavior Change Questionnaire (SBCQ) and the International Physical Activity Questionnaire (IPAQ long-version) in assessing adult leisure-time physical activity (LTPA). A total of 1.588 adults completed the IPAQ to assess LTPA and the participants who performed more than 10 min/week were classified in active individuals. Using the SBCQ, active individuals were those classified in the action or maintenance stage and inactive individuals were those classified in the precontemplation, contemplation or preparation stage. The concordance between SBCQ and IPAQ was found to be 0.80. Separated by gender, it was observed a concordance between the two instruments of 0.82 for women, and 0.77 for men. Regarding age group, it was found to be 0.81 for young and middle-aged adults, and 0.77 for older people. The SBCQ presented a very good concordance with IPAQ to assess LTPA.
Resumo:
This work presents a strategy to control nonlinear responses of aeroelastic systems with control surface freeplay. The proposed methodology is developed for the three degrees of freedom typical section airfoil considering aerodynamic forces from Theodorsen's theory. The mathematical model is written in the state space representation using rational function approximation to write the aerodynamic forces in time domain. The control system is designed using the fuzzy Takagi-Sugeno modeling to compute a feedback control gain. It useds Lyapunov's stability function and linear matrix inequalities (LMIs) to solve a convex optimization problem. Time simulations with different initial conditions are performed using a modified Runge-Kutta algorithm to compare the system with and without control forces. It is shown that this approach can compute linear control gain able to stabilize aeroelastic systems with discontinuous nonlinearities.
Resumo:
Background: We aimed to estimate the median ages at specific stages of sexual maturity stratified by excess weight in boys and girls.Materials and method: This was a cross-sectional study made in 2007 in Florianopolis, Brazil, with 2,339 schoolchildren between 8 to 14 years of age (1,107 boys) selected at random in two steps (by region and type of school). The schoolchildren were divided into: i) those with excess weight and ii) those without excess weight, according to the WHO 2007 cut-off points for gender and age. Sexual maturity was self-evaluated by the subjects according to the Tanner sexual development stages, and utilizing median ages for the genitalia, breasts, and pubic hair stages.Results: In the boys with excess weight, precocity was observed in the stages 4 for genitals and pubic hair and 2 for pubic hair, with the values for excess and normal weight. The median ages at the beginning of puberty (stage 2-sexual development) for boys and girls in Florianopolis were 10.8 and 10.3 years, respectively.Conclusion: Excess weight is associated with lower median ages in the sexual maturity stages in boys and girls and that it should be taken into account when evaluating sexual maturity in children and adolescents.
Resumo:
Three culture media (Brucella agar, Farrell medium, and CITA) were compared for their effectiveness in inhibiting contamination and for isolating Brucella spp. One hundred lymph nodes from pigs (n = 50) and wild boars (n = 50) with lymphadenitis were collected in slaughterhouses in the State of Sao Paulo and were assessed on these three selective media for Brucella spp. All of the samples were negative for Brucella spp. on the three culture media. On the agar medium, fungal (70 plates) and Gram-positive bacterial (59 plates) contaminants were observed; in the CITA medium, the absence of fungal and Gram-positive bacteria on 15 plates was observed; no bacterial or fungal growth was observed on the Farrell media. The results demonstrated that the CITA and Farrell media inhibited the growth of contaminants better than the Brucella agar.
Resumo:
The aims of the present study were to evaluate the morphometry of corpus luteum (CL) and progesterone (P-4) plasma concentration of 86 buffaloes (33 pregnant and 53 non-pregnant) and 95 cows (36 pregnant and 59 non-pregnant) at the moment of slaughter. Seventy CLs of buffaloes and 110 CL of cattle were analyzed. The CL classified as II and III were more common in both species (35.7 and 41.4% for buffaloes and 43.6 and 35.5% for cows). The 29 non-pregnant buffaloes had a total of 36 CL, being 19.4% CLI; 33.3% CL II; 27.8% CL III and 19.4% CL IV. The 51 nonpregnant cows had a total of 71 CL, being 26.8% CL I; 47.9% CL II; 21.1% CL III and 4.2% CL IV. The average diameters of bubaline and bovine CL were 5.2 +/- 0.9 and 6.4 +/- 1.8 mm (CL I); 17.6 +/- 2.6 and 19.8 +/- 3.2 mm (CL II); 17.2 +/- 2.1 and 20.0 +/- 3.2 mm (CL III); 7.8 +/- 1.8 and 8.7 +/- 2.7 mm (CL IV), respectively. The mean plasma concentrations of P4 were 5.6 (CL I); 5.4 (CL II); 4.7 (CL III) and 0.5 (CL IV) ng/mL for buffaloes and 0.02 (CL I); 6.3 (CL II) and 6.4 (CL III) ng/mL for cows. In both species, P4 concentration was similar between stages II and III. The results indicated that the characterization of the CL provides important information about the status of estrous cycle.
Resumo:
The aim of this study was to evaluate stress distribution with different implant systems through photoelasticity. Five models were fabricated with photoelastic resin PL-2. Each model was composed of a block of photoelastic resin (10 x 40 x 45 mm) with an implant and a healing abutment: model 1, internal hexagon implant (4.0 X 10 mm; Conect AR, Conexao, Sao Paulo, Brazil); model 2, Morse taper/internal octagon implant (4.1 x 10 mm; Standard, Straumann ITI, Andover, Mass); model 3, Morse taper implant (4.0 x 10 mm; AR Morse, Conexao); model 4, locking taper implant (4.0 x 11 mm; Bicon, Boston, Mass); model 5, external hexagon implant (4.0 x 10 mm; Master Screw, Conexao). Axial and oblique load (45) of 150 N were applied by a universal testing machine (EMIC-DL 3000), and a circular polariscope was used to visualize the stress. The results were photographed and analyzed qualitatively using Adobe Photoshop software. For the axial load, the greatest stress concentration was exhibited in the cervical and apical thirds. However, the highest number of isochromatic fringes was observed in the implant apex and in the cervical adjacent to the load direction in all models for the oblique load. Model 2 (Morse taper, internal octagon, Straumann ITI) presented the lowest stress concentration, while model 5 (external hexagon, Master Screw, Conexao) exhibited the greatest stress. It was concluded that Morse taper implants presented a more favorable stress distribution among the test groups. The external hexagon implant showed the highest stress concentration. Oblique load generated the highest stress in all models analyzed.
Resumo:
Because the biomechanical behavior of dental implants is different from that of natural tooth, clinical problems may occur. The mechanism of stress distribution and load transfer to the implant/bone interface is a critical issue affecting the success rate of implants. Therefore, the aim of this study was to conduct a brief literature review of the available stress analysis methods to study implant-supported prosthesis loading and to discuss their contributions in the biomechanical evaluation of oral rehabilitation with implants. Several studies have used experimental, analytical, and computational models by means of finite element models (FEM), photoelasticity, strain gauges and associations of these methods to evaluate the biomechanical behavior of dental implants. The FEM has been used to evaluate new components, configurations, materials, and shapes of implants. The greatest advantage of the photoelastic method is the ability to visualize the stresses in complex structures, such as oral structures, and to observe the stress patterns in the whole model, allowing the researcher to localize and quantify the stress magnitude. Strain gauges can be used to assess in vivo and in vitro stress in prostheses, implants, and teeth. Some authors use the strain gauge technique with photoelasticity or FEM techniques. These methodologies can be widely applied in dentistry, mainly in the research field. Therefore, they can guide further research and clinical studies by predicting some disadvantages and streamlining clinical time.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)