Stimulus determinants and receptor mechanisms involved in the tactual perception of woollen fabrics

The dimensions of touch sensations were investigated in a series of human psychophysical experiments using woollen fabrics as stimuli and words from the textile industry literature as verbal descriptors of touch sensations. Roughness was shown to be an important dimension and was found to be encoded by two out of the four receptors in the skin that respond to specific frequencies of mechanical vibration.

Recent research on natural fibres and textiles

This paper provides an overview of recent research on a range of natural fibres and textiles. The focus is on work carried out at Deakin University’s Centre for Material and Fibre Innovation, which is a multidisciplinary research centre with over 100 researchers. The fibres include hemp, wool, silk, and alpaca fibres. Research on yarns, fabrics, and fine powders made from wool and silk fibres are briefly discussed also.

The within-fibre diameter variation of wool has been examined systematically, which highlights the importance of this hard-to-measure fibre attribute. A relationship between hemp fibre fineness and residual gum content has been established, which provides a rapid means of assessing the residual gum content in the degummed hemp fibres. Silk and wool fibres have been converted into ultrafine powders for advanced applications. The Resistance to Compression (RtC) behaviour of wool and alpaca fibres has been closely examined, which challenges the belief that RtC is a good indicator of fibre softness. Ways of reducing the hairiness of natural fibre yarns, predicting the pilling propensity of wool knits, and functionalising fabrics for superhydrophobicity and photochromic or colour changing effects are discussed.

Large-scale electrospinning of polymer nanofibers using needleless nozzle

In this study, we have demonstrated that a rotating metal wire coil can be used as a nozzle to electrospin nanofibers on a large-scale. Without using any needles, the rotating wire coil, partially immersed in a polymer solution reservoir, can pick up a thin layer of charged polymer solution and generate a large number of nanofibers from the wire surface simultaneously. This arrangement significantly increases the nanofiber productivity. The fiber productivity was found to be determined by the coil dimensions, applied voltage and polymer concentration. The dependency of fiber diameter on the polymer concentration showed a similar trend to that for a conventional electrospinning system using a syringe needle nozzle, but the coil electrospun fibers were thinner with narrower diameter distribution. The profiles of electric field strength in the coil electrospinning was calculated and showed concentrated electric field intensity on the wire surface.

Functional fabrics with controlled wettability

In this study, fabrics with novel super water-repellent and unidirectional water-transfer functions have been prepared using one-step wet-chemical coating processes. The mechanism of directional water transport across the fabrics having gradient superhydrophobicity to hydrophilicity has been elucidated.

Characterization and sorption ability of wool powder

This work focused on the characterisation of wool powders and their sorption capacity for dyes and metal ions. It provides new information to the field of wool and the potential use of wool to sorb contaminants from wastewater. It also suggests a new use for inferior and waste wool.

Thermal and chemical properties of wool powders

Wool powders with different particle sizes were examined in terms of their crystal structures, thermal properties, surface chemical compositions and moisture regains. It was found that the crystallinity of wool powders was increased, and the moisture regains were decreased as the particle sizes of wool powders were reduced. For comparison, the properties of activated charcoal were also investigated. The higher dye uptake of activated charcoal at pH 10. compared to that of wool powder, could be due to its greater surface area and porous structure.

Super water repellent fabrics produced by silica nanoparticle-containing coating

In this paper, we report on superhydrophobic fabrics (polyester, wool and cotton) produced by a wet-chemical coating technique. The coating solutions were synthesized by the co-hydrolysis of two silane precursors, tetraethyl orthosilicate (TEOS) and an alkylsilane, in an alkaline condition. Without any purification, the as-hydrolyzed solutions were directly used to treat fabrics, and the treated fabrics had water contact angles (CA) as high as 170º and sliding angles (SA) as low as 5º. Three alkylsilanes have been used for the synthesis of the coating solutions, and all contain three hydrolysable alkoxyl groups and one non-hydrolysable alkyl, but with different chain lengths (C1, C8 and C16). It was found that the CA value increased with an increase in the alkyl chain length, while the SA showed a reverse trend. When the functional group had a C16 alkyl, the treated fabric surfaces were highly superhydrophobic, with the CA not being affected much by the fabric type, while the SA values were slightly affected by the original wettability of the fabric substrates. The superhydrophobic feature was attributed to a highly rough surface formed by the particulate coating. Aside from the superhydrophobicity, the influence of the coating on the fabric softness was also examined.

Photochromic textiles from hybrid silica coating with improved photostability

Photochromic surface coating on textiles may create new fashion opportunities. It also enhances the ultraviolet (UV) protection ability of the coated products. In this study, a spirooxazine dye and a silane that bears a long alkyl chain have been used to produce hybrid photochromic silica coatings on wool fabrics. Four stabilisers are added separately to the photochromic silica coatings to examine their influence on photostability and photochromic behaviour. It is found that the addition of UV stabilisers slightly reduces the photochromic response speed and photochromic absorption. However, the addition of UV stabilisers to the photochromic coating considerably improves the photochromic lifetime. Among the four UV stabilisers studied, the quencher results in the best improvement to photostability with the lowest reduction in photochromic absorption.

Recent developments in electrospinning of nanofibers and nanofiber yarns

Electropsipinning is a simple, but efficient and versatile, technology to produce polymeric nanofibers for diverse applications in both textile and non-textile areas. In this paper, recent research developments in electrospinning and electrospun nanofibers, especially thaose from the Centre for Material and Fiber Innovation, Deakin University, are introduced. Important findings on needleless mass-electrospinning and direct electrospinning of highly-twisted continuous manfiber yarns are presented.

Needleless electrospinning of nanofibrous structures

In this study, different wire coils have been used as electrodes for needless electrospinning. Very thin and uniform nanofibres have been produced, and the fibre productivity is much higher than existing electrospinning systems.

Magnet-induced temporary superhydrophobic coatings from one-pot synthesized hydrophobic magnetic nanoparticles.

In this paper, we report on the production of superhydrophobic coatings on various substrates (e.g., glass slide, silicon wafer, aluminum foil, plastic film, nanofiber mat, textile fabrics) using hydrophobic magnetic nanoparticles and a magnet-assembly technique. Fe3O4 magnetic nanoparticles functionalized with a thin layer of fluoroalkyl silica on the surface were synthesized by one-step coprecipitation of Fe2+/Fe3+ under an alkaline condition in the presence of a fluorinated alkyl silane. Under a magnetic field, the magnetic nanoparticles can be easily deposited on any solid substrate to form a thin superhydrophobic coating with water contact angle as high as 172°, and the surface superhydrophobicity showed very little dependence on the substrate type. The particulate coating showed reasonable durability because of strong aggregation effect of nanoparticles, but the coating layer can be removed (e.g., by ultrasonication) to restore the original surface feature of the substrates. By comparison, the thin particle layer deposited under no magnetic field showed much lower hydrophobicity. The main reason for magnet-induced superhydrophobic surfaces is theformation of nano- and microstructured surface features. Such a magnet-induced temporary superhydrophobic coating may have wide applications in electronic, biomedical, and defense-related areas.

Fibre production by beef cows

Cattle grow and shed fibre which assists them adapt to seasonal changes in the environment. In the absence of cattle fibre production data for southern Australia, Angus, Hereford, Simmental and Limousin cows and crosses between these breeds grazing perennial pastures at Hamilton, Victoria were sampled in late winter. The fibre-growing area on the sides of cattle was measured, fibre sampled at the mid-side site and the sampling area determined. Fibre was tested for fibre diameter distribution, clean washing yield and fibre length measured. Cows were 3-7 years of age, liveweights were 412-712 kg and the mean fibre-growing area was 2.2 m². This produced an average 682 g of total fibre (range 3461-175 g). The mean fibre diameter of all fibres was 51.7 μm (range 43-62 μm) and 18% of fibres were 36 μm (range 6-39%). The clean washing yield was 92.4% (range 87.4-95.8%). Fibre length averaged 21 mm. Increasing the age, liveweight and condition score of cows and increasing weight of clean fibre were associated with significant increases in mean fibre diameter. Breed of cattle did not affect fibre production (P > 0.1) but did affect mean fibre diameter (P < 0.05). The quantity of fibre production indicates potential for low value textile production. The high level of total fibre production, twice that of an earlier report, and fibre shedding from cattle suggests that white fibre-producing animals such as Merino sheep, Angora and cashmere goats and alpaca should avoid using cattle-handling facilities, particularly in the month before shearing.

Cuticle modifications and dyeing property of ultrasonically scoured wool

Ultrasonics has the potential to reduce the cost and environmental impact of textile processing. This work investigates the effects of utrasonic irradiation during wool scouring on fibre surface properties and fibre dyeing rate. A range of ultrasonic frequencies were used in the scouring bath to examine the forms of fibre cuticle damage. It was shown that ultrasonically scoured wool underwent some modifications of the fibre surface structure which resulted in a higher rate of dye uptake by the fibres, when compared with the conventionally scoured wool. The lower the ultrasonic frequency the more sever was the cuticle damage to wool during scouring, hence the higher the fibre dye uptake.

A correlation study of subjective sensorial evaluation and objective softness measurement of wool fabrics

Comfort is one of the most important aspects of clothing, especially for next-to-skin garments such as shirts and trousers for summer. Sensorial comfort has a strong relationship with both the mechanical and surface properties of apparel fabric. A comfortable textile material should have properties of softness, smooth surface or texture, be pleasant to touch and very flexible. When assessing fabric handle subjectively, the assessor usually strokes the fabric surface with one or several fingers and squash the fabric gently in hand. Thus, the perception of such handle includes complex parameters of compression, tactile sensation and textural effect. In this work, we attempted to use a simple technique of objectively evaluating fabric softness related properties, by measuring the force required to pull a fabric strip through a series of parallel pins (the pulling force). We also subjectively rated the fabric handle. The correlation analysis showed very good agreement between the fabric pulling force and subjective hand rating.