Spectral analysis and low-frequency multipath mitigation for kinematic applications

Low-frequency multipath is still one of the major challenges for high precision GPS relative positioning. In kinematic applications, mainly, due to geometry changes, the low-frequency multipath is difficult to be removed or modeled. Spectral analysis has a powerful technique to analyze this kind of non-stationary signals: the wavelet transform. However, some processes and specific ways of processing are necessary to work together in order to detect and efficiently mitigate low-frequency multipath. In this paper, these processes are discussed. Some experiments were carried out in a kinematic mode with a controlled and known vehicle movement. The data were collected in the presence of a reflector surface placed close to the vehicle to cause, mainly, low-frequency multipath. From theanalyses realized, the results in terms of double difference residuals and statistical tests showed that the proposed methodology is very efficient to detect and mitigate low-frequency multipath effects. © 2008 IEEE.

Multi-trait and random regression mature weight heritability and breeding value estimates in Nelore cattle

Mature weight breeding values were estimated using a multi-trait animal model (MM) and a random regression animal model (RRM). Data consisted of 82 064 weight records from 8 145 animals, recorded from birth to eight years of age. Weights at standard ages were considered in the MM. All models included contemporary groups as fixed effects, and age of dam (linear and quadratic effects) and animal age as covariates. In the RRM, mean trends were modelled through a cubic regression on orthogonal polynomials of animal age and genetic maternal and direct and maternal permanent environmental effects were also included as random. Legendre polynomials of orders 4, 3, 6 and 3 were used for animal and maternal genetic and permanent environmental effects, respectively, considering five classes of residual variances. Mature weight (five years) direct heritability estimates were 0.35 (MM) and 0.38 (RRM). Rank correlation between sires' breeding values estimated by MM and RRM was 0.82. However, selecting the top 2% (12) or 10% (62) of the young sires based on the MM predicted breeding values, respectively 71% and 80% of the same sires would be selected if RRM estimates were used instead. The RRM modelled the changes in the (co)variances with age adequately and larger breeding value accuracies can be expected using this model. © South African Society for Animal Science.

Experimental observation of infrared spectral enlargement in As 2S3 suspended core microstructured fiber

The development of chalcogenide glasses fibers for application in the infrared wavelength region between 1 and 10 μm is a big opportunity. More particularly, the possibility to generate efficient non linear effects above 2 μm is a real challenge. We present in this work the elaboration and optical characterizations of suspended core microstructured optical fibers elaborated from the As2S3 chalcogenide glass. As an alternative to the stack and draw process a mechanical machining has been used to the elaboration of the preforms. The drawing of these preforms into fibers allows reaching a suspended core geometry, in which a 2.5 μm diameter core is linked to the fiber clad region by three supporting struts. The zero dispersion wavelength is thus shifted towards 2 μm. At 1.55 μm our fibers exhibit a dispersion around -250 ps/nm/km. Their background level of losses is below 0,5 dB/m. By pumping them at 1.55 μm with a ps source, we observe self phase modulation as well as Raman generation. Finally a strong spectral enlargement is obtained with an average output power of - 5 dbm. © 2010 SPIE.

Preprocessing data for short-term load forecasting with a general regression neural network and a moving average filter

This paper proposes a filter based on a general regression neural network and a moving average filter, for preprocessing half-hourly load data for short-term multinodal load forecasting, discussed in another paper. Tests made with half-hourly load data from nine New Zealand electrical substations demonstrate that this filter is able to handle noise, missing data and abnormal data. © 2011 IEEE.

Short-term multinodal load forecasting in distribution systems using general regression neural networks

Multinodal load forecasting deals with the loads of several interest nodes in an electrical network system, which is also known as bus load forecasting. To perform this demand, it is necessary a technique that is precise, trustable and has a short-time processing. This paper proposes two methodologies based on general regression neural networks for short-term multinodal load forecasting. The first individually forecast the local loads and the second forecast the global load and individually forecast the load participation factors to estimate the local loads. To design the forecasters it wasn't necessary the previous study of the local loads. Tests were made using a New Zealand distribution subsystem and the results obtained are compatible with the ones founded in the specialized literature. © 2011 IEEE.

Szego{double acute} and para-orthogonal polynomials on the real line: Zeros and canonical spectral transformations

We study polynomials which satisfy the same recurrence relation as the Szego{double acute} polynomials, however, with the restriction that the (reflection) coefficients in the recurrence are larger than one in modulus. Para-orthogonal polynomials that follow from these Szego{double acute} polynomials are also considered. With positive values for the reflection coefficients, zeros of the Szego{double acute} polynomials, para-orthogonal polynomials and associated quadrature rules are also studied. Finally, again with positive values for the reflection coefficients, interlacing properties of the Szego{double acute} polynomials and polynomials arising from canonical spectral transformations are obtained. © 2012 American Mathematical Society.

Random regression models using Legendre polynomials or linear splines for test-day milk yield of dairy Gyr (Bos indicus) cattle

Studies investigating the use of random regression models for genetic evaluation of milk production in Zebu cattle are scarce. In this study, 59,744 test-day milk yield records from 7,810 first lactations of purebred dairy Gyr (Bos indicus) and crossbred (dairy Gyr × Holstein) cows were used to compare random regression models in which additive genetic and permanent environmental effects were modeled using orthogonal Legendre polynomials or linear spline functions. Residual variances were modeled considering 1, 5, or 10 classes of days in milk. Five classes fitted the changes in residual variances over the lactation adequately and were used for model comparison. The model that fitted linear spline functions with 6 knots provided the lowest sum of residual variances across lactation. On the other hand, according to the deviance information criterion (DIC) and Bayesian information criterion (BIC), a model using third-order and fourth-order Legendre polynomials for additive genetic and permanent environmental effects, respectively, provided the best fit. However, the high rank correlation (0.998) between this model and that applying third-order Legendre polynomials for additive genetic and permanent environmental effects, indicates that, in practice, the same bulls would be selected by both models. The last model, which is less parameterized, is a parsimonious option for fitting dairy Gyr breed test-day milk yield records. © 2013 American Dairy Science Association.

Comparison of random regression models to estimate genetic parameters for milk production in Guzerat (Bos indicus) cows

Random regression models have been widely used to estimate genetic parameters that influence milk production in Bos taurus breeds, and more recently in B. indicus breeds. With the aim of finding appropriate random regression model to analyze milk yield, different parametric functions were compared, applied to 20,524 test-day milk yield records of 2816 first-lactation Guzerat (B. indicus) cows in Brazilian herds. The records were analyzed by random regression models whose random effects were additive genetic, permanent environmental and residual, and whose fixed effects were contemporary group, the covariable cow age at calving (linear and quadratic effects), and the herd lactation curve. The additive genetic and permanent environmental effects were modeled by the Wilmink function, a modified Wilmink function (with the second term divided by 100), a function that combined third-order Legendre polynomials with the last term of the Wilmink function, and the Ali and Schaeffer function. The residual variances were modeled by means of 1, 4, 6, or 10 heterogeneous classes, with the exception of the last term of the Wilmink function, for which there were 1, from 0.20 to 0.33. Genetic correlations between adjacent records were high values (0.83-0.99), but they declined when the interval between the test-day records increased, and were negative between the first and last records. The model employing the Ali and Schaeffer function with six residual variance classes was the most suitable for fitting the data. © FUNPEC-RP.

Genetic evaluation using multi-trait and random regression models in Simmental beef cattle

The Brazilian Association of Simmental and Simbrasil Cattle Farmers provided 29,510 records from 10,659 Simmental beef cattle; these were used to estimate (co)variance components and genetic parameters for weights in the growth trajectory, based on multi-trait (MTM) and random regression models (RRM). The (co)variance components and genetic parameters were estimated by restricted maximum likelihood. In the MTM analysis, the likelihood ratio test was used to determine the significance of random effects included in the model and to define the most appropriate model. All random effects were significant and included in the final model. In the RRM analysis, different adjustments of polynomial orders were compared for 5 different criteria to choose the best fit model. An RRM of third order for the direct additive genetic, direct permanent environmental, maternal additive genetic, and maternal permanent environment effects was sufficient to model variance structures in the growth trajectory of the animals. The (co)variance components were generally similar in MTM and RRM. Direct heritabilities of MTM were slightly lower than RRM and varied from 0.04 to 0.42 and 0.16 to 0.45, respectively. Additive direct correlations were mostly positive and of high magnitude, being highest at closest ages. Considering the results and that pre-adjustment of the weights to standard ages is not required, RRM is recommended for genetic evaluation of Simmental beef cattle in Brazil. ©FUNPEC-RP.

Influence of the concentration of polyols on the rheological and spectral characteristics of guar gum

Polyols are widely used as sugar substitutes and provide texture to foods. Guar gum has many applications in food industry such as increasing product viscosity and improving texture. Knowledge of rheological properties of gum/polyol systems is important to permit replacing sugar while maintaining product texture. In this work, rheological properties of 0.1, 0.5 and 1 g/100 g guar solutions containing 10 and 40 g/100 g of maltitol, sorbitol, or xylitol were studied. The behavior of these mixtures was evaluated by steady and oscillatory shear measurements, and after a freezing/thawing cycle. Apparent viscosity of guar solutions increased with addition of polyols and with the increase in their concentrations, except for 40 g/100 g sorbitol addition to 1 g/100 g guar gum, in which the apparent viscosity decreased. Addition of polyols also increased the dynamic moduli of the systems. In mixtures of guar with 40 g/100 g polyol, the phase angle (δ) was below unity, but was dependent on frequency, which is characteristic of concentrated solutions with a certain degree of structuring. FTIR spectroscopy was studied to provide information on possible interactions between guar gum and polyols. Analyses carried out after freezing/thawing showed no changes in the viscoelastic behavior of the solutions. © 2013 Elsevier Ltd.

Multiple-trait random regression models for the estimation of genetic parameters for milk, fat, and protein yield in buffaloes

In this study, genetic parameters for test-day milk, fat, and protein yield were estimated for the first lactation. The data analyzed consisted of 1,433 first lactations of Murrah buffaloes, daughters of 113 sires from 12 herds in the state of São Paulo, Brazil, with calvings from 1985 to 2007. Ten-month classes of lactation days were considered for the test-day yields. The (co)variance components for the 3 traits were estimated using the regression analyses by Bayesian inference applying an animal model by Gibbs sampling. The contemporary groups were defined as herd-year-month of the test day. In the model, the random effects were additive genetic, permanent environment, and residual. The fixed effects were contemporary group and number of milkings (1 or 2), the linear and quadratic effects of the covariable age of the buffalo at calving, as well as the mean lactation curve of the population, which was modeled by orthogonal Legendre polynomials of fourth order. The random effects for the traits studied were modeled by Legendre polynomials of third and fourth order for additive genetic and permanent environment, respectively, the residual variances were modeled considering 4 residual classes. The heritability estimates for the traits were moderate (from 0.21-0.38), with higher estimates in the intermediate lactation phase. The genetic correlation estimates within and among the traits varied from 0.05 to 0.99. The results indicate that the selection for any trait test day will result in an indirect genetic gain for milk, fat, and protein yield in all periods of the lactation curve. The accuracy associated with estimated breeding values obtained using multi-trait random regression was slightly higher (around 8%) compared with single-trait random regression. This difference may be because to the greater amount of information available per animal. © 2013 American Dairy Science Association.

Potencial da espectroscopia no infravermelho próximo para distinção de carvão de madeira de Eucalyptus e nativa

The objective of this study was to evaluate the potential of near infrared spectroscopy (NIRS) associated with multivariate statistics to distinguish coal produced from wood of planted and native forests. Timber forest species from the C errado (Cedrela sp., Aspidosperma sp., Jacaranda sp. and unknown species) and Eucalyptus clones from forestry companies (Vallourec and Cenibra) were carbonized in the final temperatures of 300, 500 and 700°C. In each heat treatment were carbonized 15 specimens of each vegetal material totaling 270 samples (3 treatments x 15 reps x 6 materials) produced in 18 carbonization (3 treatments x 6 materials). The acquisition of the spectra of coals in the near infrared using a spectrometer was performed. Principal Component Analysis (PCA) and Partial Least Squares Regression (PLS-R) were carried out in the spectra. NIR Spectroscopy associated with PCA was not able to differentiate charcoals produced from native and planted woods when utilizing all carbonized samples at different temperatures in the same analysis; The PCA of all charcoals was able to distinguish the samples depending on temperature in which they were carbonized. However, the separation of native and planted charcoal was possible when the samples were analyzed separately by final temperature. The prediction of native or planted classes by PLS-R presented better performance for samples carbonized at 300°C followed by those at 500°C, 700°C and for all together.

Desenvolvimento de modelos quimiométricos associados à espectroscopia no infravermelho para determinação de parâmetros físico-químicos do óleo diesel

Pós-graduação em Química - IQ

Espacialização do biovolume de plantas aquáticas submersas a partir da integração de dados obtidos por sensores remotos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simulação de perfis nucleares de poço em formações complexas

A identificação e descrição dos caracteres litológicos de uma formação são indispensáveis à avaliação de formações complexas. Com este objetivo, tem sido sistematicamente usada a combinação de ferramentas nucleares em poços não-revestidos. Os perfis resultantes podem ser considerados como a interação entre duas fases distintas: • Fase de transporte da radiação desde a fonte até um ou mais detectores, através da formação. • Fase de detecção, que consiste na coleção da radiação, sua transformação em pulsos de corrente e, finalmente, na distribuição espectral destes pulsos. Visto que a presença do detector não afeta fortemente o resultado do transporte da radiação, cada fase pode ser simulada independentemente uma da outra, o que permite introduzir um novo tipo de modelamento que desacopla as duas fases. Neste trabalho, a resposta final é simulada combinando soluções numéricas do transporte com uma biblioteca de funções resposta do detector, para diferentes energias incidentes e para cada arranjo específico de fontes e detectores. O transporte da radiação é calculado através do algoritmo de elementos finitos (FEM), na forma de fluxo escalar 2½-D, proveniente da solução numérica da aproximação de difusão para multigrupos da equação de transporte de Boltzmann, no espaço de fase, dita aproximação P₁, onde a variável direção é expandida em termos dos polinômios ortogonais de Legendre. Isto determina a redução da dimensionalidade do problema, tornando-o mais compatível com o algoritmo FEM, onde o fluxo dependa exclusivamente da variável espacial e das propriedades físicas da formação. A função resposta do detector NaI(Tl) é obtida independentemente pelo método Monte Carlo (MC) em que a reconstrução da vida de uma partícula dentro do cristal cintilador é feita simulando, interação por interação, a posição, direção e energia das diferentes partículas, com a ajuda de números aleatórios aos quais estão associados leis de probabilidades adequadas. Os possíveis tipos de interação (Rayleigh, Efeito fotoelétrico, Compton e Produção de pares) são determinados similarmente. Completa-se a simulação quando as funções resposta do detector são convolvidas com o fluxo escalar, produzindo como resposta final, o espectro de altura de pulso do sistema modelado. Neste espectro serão selecionados conjuntos de canais denominados janelas de detecção. As taxas de contagens em cada janela apresentam dependências diferenciadas sobre a densidade eletrônica e a fitologia. Isto permite utilizar a combinação dessas janelas na determinação da densidade e do fator de absorção fotoelétrico das formações. De acordo com a metodologia desenvolvida, os perfis, tanto em modelos de camadas espessas quanto finas, puderam ser simulados. O desempenho do método foi testado em formações complexas, principalmente naquelas em que a presença de minerais de argila, feldspato e mica, produziram efeitos consideráveis capazes de perturbar a resposta final das ferramentas. Os resultados mostraram que as formações com densidade entre 1.8 e 4.0 g/cm³ e fatores de absorção fotoelétrico no intervalo de 1.5 a 5 barns/e^-, tiveram seus caracteres físicos e litológicos perfeitamente identificados. As concentrações de Potássio, Urânio e Tório, puderam ser obtidas com a introdução de um novo sistema de calibração, capaz de corrigir os efeitos devidos à influência de altas variâncias e de correlações negativas, observadas principalmente no cálculo das concentrações em massa de Urânio e Potássio. Na simulação da resposta da sonda CNL, utilizando o algoritmo de regressão polinomial de Tittle, foi verificado que, devido à resolução vertical limitada por ela apresentada, as camadas com espessuras inferiores ao espaçamento fonte - detector mais distante tiveram os valores de porosidade aparente medidos erroneamente. Isto deve-se ao fato do algoritmo de Tittle aplicar-se exclusivamente a camadas espessas. Em virtude desse erro, foi desenvolvido um método que leva em conta um fator de contribuição determinado pela área relativa de cada camada dentro da zona de máxima informação. Assim, a porosidade de cada ponto em subsuperfície pôde ser determinada convolvendo estes fatores com os índices de porosidade locais, porém supondo cada camada suficientemente espessa a fim de adequar-se ao algoritmo de Tittle. Por fim, as limitações adicionais impostas pela presença de minerais perturbadores, foram resolvidas supondo a formação como que composta por um mineral base totalmente saturada com água, sendo os componentes restantes considerados perturbações sobre este caso base. Estes resultados permitem calcular perfis sintéticos de poço, que poderão ser utilizados em esquemas de inversão com o objetivo de obter uma avaliação quantitativa mais detalhada de formações complexas.