Dynamic term size computation in logic programs via program transformation

Knowing the size of the terms to which program variables are bound at run-time in logic programs is required in a class of applications related to program optimization such as, for example, recursion elimination and granularity analysis. Such size is difficult to even approximate at compile time and is thus generally computed at run-time by using (possibly predefined) predicates which traverse the terms involved. We propose a technique based on program transformation which has the potential of performing this computation much more efficiently. The technique is based on finding program procedures which are called before those in which knowledge regarding term sizes is needed and which traverse the terms whose size is to be determined, and transforming such procedures so that they compute term sizes "on the fly". We present a systematic way of determining whether a given program can be transformed in order to compute a given term size at a given program point without additional term traversal. Also, if several such transformations are possible our approach allows finding minimal transformations under certain criteria. We also discuss the advantages and present some applications of our technique.

Nutrition and physical activity programs for obesity treatment (PRONAF study). methodological approach of the project

Este trabajo aborda la metodología seguida para llevar a cabo el proyecto de investigación PRONAF (Clinical Trials Gov.: number NCT01116856.) Background: At present, scientific consensus exists on the multifactorial etiopatogenia of obesity. Both professionals and researchers agree that treatment must also have a multifactorial approach, including diet, physical activity, pharmacology and/or surgical treatment. These two last ones should be reserved for those cases of morbid obesities or in case of failure of the previous ones. The aim of the PRONAF study is to determine what type of exercise combined with caloric restriction is the most appropriate to be included in overweigth and obesity intervention programs, and the aim of this paper is to describe the design and the evaluation methods used to carry out the PRONAF study. Methods/design: One-hundred nineteen overweight (46 males) and 120 obese (61 males) subjects aged 18–50 years were randomly assigned to a strength training group, an endurance training group, a combined strength + endurance training group or a diet and physical activity recommendations group. The intervention period was 22 weeks (in all cases 3 times/wk of training for 22 weeks and 2 weeks for pre and post evaluation). All subjects followed a hypocaloric diet (25-30% less energy intake than the daily energy expenditure estimated by accelerometry). 29–34% of the total energy intake came from fat, 14–20% from protein, and 50–55% from carbohydrates. The mayor outcome variables assesed were, biochemical and inflamatory markers, body composition, energy balance, physical fitness, nutritional habits, genetic profile and quality of life. 180 (75.3%) subjects finished the study, with a dropout rate of 24.7%. Dropout reasons included: personal reasons 17 (28.8%), low adherence to exercise 3 (5.1%), low adherence to diet 6 (10.2%), job change 6 (10.2%), and lost interest 27 (45.8%). Discussion: Feasibility of the study has been proven, with a low dropout rate which corresponds to the estimated sample size. Transfer of knowledge is foreseen as a spin-off, in order that overweight and obese subjects can benefit from the results. The aim is to transfer it to sports centres. Effectiveness on individual health-related parameter in order to determine the most effective training programme will be analysed in forthcoming publications.

Properties and applications of high electron density structures based on InN and related compounds

El objetivo principal del presente trabajo es estudiar y explotar estructuras que presentan un gas bidimensional de electrones (2DEG) basadas en compuestos nitruros con alto contenido de indio. Existen muchas preguntas abiertas, relacionadas con el nitruro de indio y sus aleaciones, algunas de las cuales se han abordado en este estudio. En particular, se han investigado temas relacionados con el análisis y la tecnología del material, tanto para el InN y heteroestructuras de InAl(Ga)N/GaN como para sus aplicaciones a dispositivos avanzados. Después de un análisis de la dependencia de las propiedades del InN con respecto a tratamientos de procesado de dispositivos (plasma y térmicos), el problema relacionado con la formación de un contacto rectificador es considerado. Concretamente, su dificultad es debida a la presencia de acumulación de electrones superficiales en la forma de un gas bidimensional de electrones, debido al pinning del nivel de Fermi. El uso de métodos electroquímicos, comparados con técnicas propias de la microelectrónica, ha ayudado para la realización de esta tarea. En particular, se ha conseguido lamodulación de la acumulación de electrones con éxito. En heteroestructuras como InAl(Ga)N/GaN, el gas bidimensional está presente en la intercara entre GaN y InAl(Ga)N, aunque no haya polarización externa (estructuras modo on). La tecnología relacionada con la fabricación de transistores de alta movilidad en modo off (E-mode) es investigada. Se utiliza un método de ataque húmedo mediante una solución de contenido alcalino, estudiando las modificaciones estructurales que sufre la barrera. En este sentido, la necesidad de un control preciso sobre el material atacado es fundamental para obtener una estructura recessed para aplicaciones a transistores, con densidad de defectos e inhomogeneidad mínimos. La dependencia de la velocidad de ataque de las propiedades de las muestras antes del tratamiento es observada y comentada. Se presentan también investigaciones relacionadas con las propiedades básicas del InN. Gracias al uso de una puerta a través de un electrolito, el desplazamiento de los picos obtenidos por espectroscopia Raman es correlacionado con una variación de la densidad de electrones superficiales. En lo que concierne la aplicación a dispositivos, debido al estado de la tecnología actual y a la calidad del material InN, todavía no apto para dispositivos, la tesis se enfoca a la aplicación de heteroestructuras de InAl(Ga)N/GaN. Gracias a las ventajas de una barrera muy fina, comparada con la tecnología de AlGaN/GaN, el uso de esta estructura es adecuado para aplicaciones que requieren una elevada sensibilidad, estando el canal 2DEG más cerca de la superficie. De hecho, la sensibilidad obtenida en sensores de pH es comparable al estado del arte en términos de variaciones de potencial superficial, y, debido al poco espesor de la barrera, la variación de la corriente con el pH puede ser medida sin necesidad de un electrodo de referencia externo. Además, estructuras fotoconductivas basadas en un gas bidimensional presentan alta ganancia debida al elevado campo eléctrico en la intercara, que induce una elevada fuerza de separación entre hueco y electrón generados por absorción de luz. El uso de metalizaciones de tipo Schottky (fotodiodos Schottky y metal-semiconductormetal) reduce la corriente de oscuridad, en comparación con los fotoconductores. Además, la barrera delgada aumenta la eficiencia de extracción de los portadores. En consecuencia, se obtiene ganancia en todos los dispositivos analizados basados en heteroestructuras de InAl(Ga)N/GaN. Aunque presentando fotoconductividad persistente (PPC), los dispositivos resultan más rápidos con respeto a los valores que se dan en la literatura acerca de PPC en sistemas fotoconductivos. ABSTRACT The main objective of the present work is to study and exploit the two-dimensionalelectron- gas (2DEG) structures based on In-related nitride compounds. Many open questions are analyzed. In particular, technology and material-related topics are the focus of interest regarding both InNmaterial and InAl(Ga)N/GaNheterostructures (HSs) as well as their application to advanced devices. After the analysis of the dependence of InN properties on processing treatments (plasma-based and thermal), the problemof electrical blocking behaviour is taken into consideration. In particular its difficulty is due to the presence of a surface electron accumulation (SEA) in the form of a 2DEG, due to Fermi level pinning. The use of electrochemical methods, compared to standard microelectronic techniques, helped in the successful realization of this task. In particular, reversible modulation of SEA is accomplished. In heterostructures such as InAl(Ga)N/GaN, the 2DEGis present at the interface between GaN and InAl(Ga)N even without an external bias (normally-on structures). The technology related to the fabrication of normally off (E-mode) high-electron-mobility transistors (HEMTs) is investigated in heterostructures. An alkali-based wet-etching method is analysed, standing out the structural modifications the barrier underwent. The need of a precise control of the etched material is crucial, in this sense, to obtain a recessed structure for HEMT application with the lowest defect density and inhomogeneity. The dependence of the etch rate on the as-grown properties is observed and commented. Fundamental investigation related to InNis presented, related to the physics of this degeneratematerial. With the help of electrolyte gating (EG), the shift in Raman peaks is correlated to a variation in surface eletron density. As far as the application to device is concerned, due to the actual state of the technology and material quality of InN, not suitable for working devices yet, the focus is directed to the applications of InAl(Ga)N/GaN HSs. Due to the advantages of a very thin barrier layer, compared to standard AlGaN/GaN technology, the use of this structure is suitable for high sensitivity applications being the 2DEG channel closer to the surface. In fact, pH sensitivity obtained is comparable to the state-of-the-art in terms of surface potential variations, and, due to the ultrathin barrier, the current variation with pH can be recorded with no need of the external reference electrode. Moreover, 2DEG photoconductive structures present a high photoconductive gain duemostly to the high electric field at the interface,and hence a high separation strength of photogenerated electron and hole. The use of Schottky metallizations (Schottky photodiode and metal-semiconductor-metal) reduce the dark current, compared to photoconduction, and the thin barrier helps to increase the extraction efficiency. Gain is obtained in all the device structures investigated. The devices, even if they present persistent photoconductivity (PPC), resulted faster than the standard PPC related decay values.

A new method to analyse the perception of size

In living bodies, the correct perceptual representation of size constancy requires that an object's size appear the same when it changes its location with respect to the observer. At the same time, it is necessary that objects at different locations appear to be the same size if they are. In order to do that, the perceptual system must recover from the stimuli impinging on the individual, from the light falling on the retina, a representation of the relative sizes of objects in the environment. Moreover, at the same time, image perception is related to another type of phenomena. It corresponds to the well known perceptual illusions. To analyze this facts, we propose a system based on a particular arrays of receptive points composed by optical fibers and dummy fibers. The structure is based on the first layers of the mammalians primary visual cortex. At that part of the brain, the neurons located at certain columns, respond to particular directions. This orientation changes in a systematic way as one moves across the cortical surface. In our case, the signals from the above-mentioned array are analyzed and information concerning orientation and size of a particular line is obtained. With this system, the Muelle-Lyer illusion has been studied and some rules to interpret why equal length objects give rise to different interpretations are presented.

Models for the prediction of handling damage in citrus and peaches grading lines, related to their physical properties.

Fruit damage during harvesting and handling is a standing problem, particularly for susceptible fruits like peaches and apricots. The resulting mechanical damage is a combination of fruit properties and damage inflicting effects due to procedures and to the equipment. Nine packing lines in the region of Murcia (SE Spain) have been tested with the aid of two different-size electronic fruits IS-100. Probabilities of impacts above three preset thresholds (50 g's, 100 g's and 150 g's) were calculated for each transfer point. Interaction fruit-packing line tests have been also performed in order to study the real incidence of packing lines on natural produce: apricots (1 variety), peaches (3 v.), lemons (1 v.) and oranges (3 v.). Bruises of handled and not handled samples of fruits were compared.

On some sampling-related frames in U-invariant spaces

This paper concerns the characterization as frames of some sequences in U-invariant spaces of a separable Hilbert space H where U denotes an unitary operator defined on H ; besides, the dual frames having the same form are also found. This general setting includes, in particular, shift-invariant or modulation-invariant subspaces in L2 (R), where these frames are intimately related to the generalized sampling problem. We also deal with some related perturbation problems. In so doing, we need that the unitary operator U belongs to a continuous group of unitary operators.

Potential issues related to emergency core cooling system strainers performance at boiling water reactors: application to Cofrentes NPP (Spain)

From the 60s to the 90s, a great number of events related to the Emergency Core Cooling Systems Strainers have been happened in all kind of reactors all over the world. Thus, the Nuclear Regulatory Commission of the USA emitted some Bulletins to address the concerns about the adequacy of Emergency Core Cooling Systems (ECCS) strainer performance at boiling water reactors (BWR). In Spain the regulatory body (Consejo de Seguridad Nuclear, CSN) adopted the USA regulation and Cofrentes NPP installed new strainers with a considerable bigger size than the old strainers. The nuclear industry conducted significant and extensive research, guidance development, testing, reviews, and hardware and procedure changes during the 90s to resolve the issues related to debris blockage of BWR strainers. In 2001 the NRC and CSN closed the Bulletins. Thereafter, the strainers issues were moved to the PWR reactors. In 2004 the NRC issued a Generic Letter (GL). It requested the resolution of several effects which were not noted in the past. The GL regarded to be resolved by the PWR reactors but the NRC in USA and the CSN in Spain have requested that the BWR reactors investigate differences between the methodologies used by the BWRs and PWRs. The developments and improvements done for Cofrentes NPP are detailed. Studies for this plant show that the head loss due to the considered debris is at most half of the limited head loss for the ECCS strainer and the NPSH (Net Positive Suction Head) required for the ECCS pumps is at least three times lower than the NPSH available.

Contribution to the analysis and design of reflectarray antennas for reconfigurable beam applications at frequencies above 100 GHz using liquid crystal technology

El trabajo contenido en esta tesis doctoral está encuadrado en el desarrollo de antenas reconfigurables electrónicamente capaces de proporcionar prestaciones competitivas a las aplicaciones cada vez más comunes que operan a frecuencias superiores a 60 GHz. En concreto, esta tesis se centra en el estudio, diseño, e implementación de las antenas reflectarray, a las que se introduce la tecnología de cristal líquido como elemento característico con el que se consigue reconfigurabilidad de haz de forma electrónica. Desde un punto de vista muy general, se puede describir un cristal líquido como un material cuya permitividad eléctrica es variable y controlada por una excitación externa, que generalmente suele corresponderse con un campo eléctrico quasi-estático (AC). Las antenas reflectarray de cristal líquido se han escogido como objeto de estudio por varias razones. La primera de ellas tiene que ver con las ventajas que los reflectarrays, y en especial aquellos realizados en configuración planar, proporcionan con respecto a otras antenas de alta ganancia como los reflectores o los “phased-arrays”. En los reflectarrays, la alimentación a través de una fuente primaria común (característica de reflectores) y el elevado número de grados de libertad de las celdas que los componen (característica de arrays) hacen que estas antenas puedan proporcionar prestaciones eléctricas iguales o mejores que las anteriores, a un coste más reducido y con estructuras de antena más compactas. La segunda razón radica en la flexibilidad que ofrece el cristal líquido a ser confinado y polarizado en recintos de geometría variada, como consecuencia de su fluidez (propiedad de los líquidos). Por ello, la tecnología de cristal líquido permite que el propio elemento reconfigurable en las celdas de reflectarray se adapte a la configuración planar de manera que en sí mismo, el cristal líquido sea una o varias de las capas características de esta configuración. Esto simplifica de forma drástica la estructura y la fabricación de este tipo de antenas, incluso si se comparan con reflectarrays reconfigurables basados en otras tecnologías como diodos, MEMS, etc. Por tanto, su coste y desarrollo es muy reducido, lo que hace que se puedan fabricar reflectarrays reconfigurables eléctricamente grandes, a bajo coste, y en producción elevada. Un ejemplo claro de una estructura similar, y que ha tenido éxito comercial, son las pantallas de cristal líquido. La tercera razón reside en el hecho de que el cristal líquido es, hasta la fecha, de las pocas tecnologías capaces de ofrecer reconfigurabilidad del haz a frecuencias superiores a 60 GHz. De hecho, el cristal líquido permite reconfigurabilidad en un amplio margen de frecuencias, que va desde DC a frecuencias del espectro visible, incluyendo las microondas y los THz. Otras tecnologías, como los materiales ferroeléctricos, el grafeno o la tecnología CMOS “on chip” permiten también conmutar el haz en estas frecuencias. Sin embargo, la tecnología CMOS tiene un elevado coste y actualmente está limitada a frecuencias inferiores a 150 GHz, y aunque los materiales ferroeléctricos o el grafeno puedan conmutar a frecuencias más altas y en un rango más amplio, tienen serias dificultades que los hacen aún inmaduros. En el caso de los materiales ferroeléctricos, los elevados voltajes para conmutar el material los hacen poco atractivos, mientras que en el caso del grafeno, su modelado aún está en discusión, y todavía no se han arrojado resultados experimentales que validen su idoneidad. Estas tres razones hacen que los reflectarrays basados en cristal líquido sean atractivos para multitud de aplicaciones de haz reconfigurable a frecuencias superiores a 60 GHz. Aplicaciones como radar de escaneo de imágenes de alta resolución, espectroscopia molecular, radiómetros para observación atmosférica, o comunicaciones inalámbricas de alta frecuencia (WiGig) son algunas de ellas. La tesis está estructurada en tres partes. En la primera de ellas se describen las características más comunes de los cristales líquidos, centrándonos en detalle en aquellas propiedades ofrecidas por este material en fase nemática. En concreto, se estudiará la anisotropía dieléctrica (Ae) de los cristales líquidos uniaxiales, que son los que se emplean en esta tesis, definida como la diferencia entre la permitividad paralela (£//) y la perpendicular (e±): Ae = e,, - e±. También se estudiará la variación de este parámetro (Ae) con la frecuencia, y el modelado electromagnético macroscópico más general que, extraído a partir de aquella, permite describir el cristal líquido para cada tensión de polarización en celdas de geometría planar. Este modelo es de suma importancia para garantizar precisión en el desfasaje proporcionado por las diferentes celdas reconfigurables para reflectarrays que se describirán en la siguiente parte de la tesis. La segunda parte de la tesis se centra en el diseño de celdas reflectarray resonantes basadas en cristal líquido. La razón por la que se escogen estos tipos de celdas reside en el hecho de que son las únicas capaces de proporcionar rangos de fase elevados ante la reducida anisotropía dieléctrica que ofrecen los cristales líquidos. El objetivo de esta parte trata, por tanto, de obtener estructuras de celdas reflectarray que sean capaces de proporcionar buenas prestaciones eléctricas a nivel de antena, mejorando sustancialmente las prestaciones de las celdas reportadas en el estado del arte, así como de desarrollar una herramienta de diseño general para aquellas. Para ello, se estudian las prestaciones eléctricas de diferentes tipos de elementos resonantes de cristal líquido que van, desde el más sencillo, que ha limitado el estado de la técnica hasta el desarrollo de esta tesis y que está formado por un sólo resonador, a elementos que constan de varios resonadores (multi-resonantes) y que pueden ser monocapa o multicapa. En un primer paso, el procedimiento de diseño de estas estructuras hace uso de un modelo convencional de cristal líquido que ha venido siendo usado en el estado del arte para este tipo de celdas, y que considera el cristal líquido como un material homogéneo e isótropo cuya permitividad varía entre (e/7) y (e±). Sin embargo, en esta parte de la tesis se demuestra que dicho modelado no es suficiente para describir de forma genérica el comportamiento del cristal líquido en las celdas tipo reflectarray. En la tesis se proponen procedimientos más exactos para el análisis y diseño basados en un modelo más general que define el cristal líquido como un material anisótropo e inhomogeneo en tres dimensiones, y se ha implementado una técnica que permite optimizar celdas multi-resonantes de forma eficiente para conseguir elevadas prestaciones en cuanto a ancho de banda, rango de fase, pérdidas, o sensibilidad al ángulo de incidencia. Los errores cometidos en el uso del modelado convencional a nivel de celda (amplitud y fase) se han analizado para varias geometrías, usando medidas de varios prototipos de antena que usan un cristal líquido real a frecuencias superiores a 100 GHz. Las medidas se han realizado en entorno periódico mediante un banco cuasi-óptico, que ha sido diseñado especialmente para este fin. Uno de estos prototipos se ha optimizado a 100 GHz para conseguir un ancho de banda relativamente elevado (10%), pérdidas reducidas, un rango de fase mayor de 360º, baja sensibilidad al ángulo de incidencia, y baja influencia de la inhomogeneidad transversal del cristal líquido en la celda. Estas prestaciones a nivel de celda superan de forma clara aquellas conseguidas por otros elementos que se han reportado en la literatura, de manera que dicho prototipo se ha usado en la última parte de la tesis para realizar diversas antenas de barrido. Finalmente, en esta parte se presenta una estrategia de caracterización de la anisotropía macroscópica a partir de medidas de los elementos de reflectarray diseñados en banco cuasi-óptico, obteniendo resultados tanto en las frecuencias de interés en RF como en AC, y comparándolas con aquellas obtenidas mediante otros métodos. La tercera parte de la tesis consiste en el estudio, diseño, fabricación y medida de antenas reconfigurables basadas en cristal líquido en configuraciones complejas. En reflectarrays pasivos, el procedimiento de diseño de la antena se limita únicamente al ajuste en cada celda de la antena de las dimensiones de las metalizaciones que se emplean para el control de fase, mediante procesos de optimización bien conocidos. Sin embargo, en el caso de reflectarrays reconfigurables basados en cristal líquido, resulta necesario un paso adicional, que consiste en calcular de forma adecuada las tensiones de control en cada celda del reflectarray para configurar la fase requerida en cada una de ellas, así como diseñar la estructura y los circuitos de control que permitan direccionar a cada elemento su tensión correspondiente. La síntesis de tensiones es por tanto igual o más importante que el diseño de la geometría de las celdas, puesto que éstas son las que están directamente relacionadas con la fase. En el estado del arte, existen varias estrategias de síntesis de tensiones que se basan en la caracterización experimental de la curva de fase respecto al voltaje. Sin embargo, esta caracterización sólo puede hacerse a un solo ángulo de incidencia y para unas determinadas dimensiones de celda, lo que produce que las tensiones sintetizadas sean diferentes de las adecuadas, y en definitiva que se alcancen errores de fase mayores de 70º. De esta forma, hasta la fecha, las prestaciones a nivel de antena que se han conseguido son reducidas en cuanto a ancho de banda, rango de escaneo o nivel de lóbulos secundarios. En esta última parte de la tesis, se introduce una nueva estrategia de síntesis de tensiones que es capaz de predecir mediante simulaciones, y con alta precisión, las tensiones que deben introducirse en cada celda teniendo en cuenta su ángulo de incidencia, sus dimensiones, la frecuencia, así como la señal de polarización definida por su frecuencia y forma de onda AC. Esta estrategia se basa en modelar cada uno de los estados de permitividad del cristal líquido como un sustrato anisótropo con inhomogeneidad longitudinal (1D), o en ciertos casos, como un tensor equivalente homogéneo. La precisión de ambos modelos electromagnéticos también se discute. Con el objetivo de obtener una herramienta eficiente de cálculo de tensiones, también se ha escrito e implementado una herramienta de análisis basada en el Método de los Momentos en el Dominio Espectral (SD-MoM) para sustratos estratificados anisótropos, que se usa en cada iteración del procedimiento de síntesis para analizar cada una de las celdas de la antena. La síntesis de tensiones se ha diseñado además para reducir al máximo el efecto del rizado de amplitud en el diagrama de radiación, que es característico en los reflectarrays que están formados por celdas con pérdidas elevadas, lo que en sí, supone un avance adicional para la obtención de mejores prestaciones de antena. Para el cálculo de los diagramas de radiación empleados en el procedimiento de síntesis, se asume un análisis elemento a elemento considerando periodicidad local, y se propone el uso de un método capaz de modelar el campo incidente de forma que se elimine la limitación de la periodicidad local en la excitación. Una vez definida la estrategia adecuada de cálculo de las tensiones a aplicar al cristal líquido en cada celda, la estructura de direccionamiento de las mismas en la antena, y diseñados los circuitos de control, se diseñan, fabrican y miden dos prototipos diferentes de antena de barrido electrónico a 100 GHz usando las celdas anteriormente presentadas. El primero de estos prototipos es un reflectarray en configuración “single offset” con capacidad de escaneo en un plano (elevación o azimut). Aunque previamente se realizan diseños de antenas de barrido en 2D a varias frecuencias en el rango de milimétricas y sub-milimétricas, y se proponen ciertas estrategias de direccionamiento que permiten conseguir este objetivo, se desarrolla el prototipo con direccionamiento en una dimensión con el fin de reducir el número de controles y posibles errores de fabricación, y así también validar la herramienta de diseño. Para un tamaño medio de apertura (con un numero de filas y columnas entre 30 y 50 elementos, lo que significa un reflectarray con un número de elementos superior a 900), la configuración “single offset” proporciona rangos de escaneo elevados, y ganancias que pueden oscilar entre los 20 y 30 dBi. En concreto, el prototipo medido proporciona un haz de barrido en un rango angular de 55º, en el que el nivel de lóbulos secundarios (SLL) permanece mejor de -13 dB en un ancho de banda de un 8%. La ganancia máxima es de 19.4 dBi. Estas prestaciones superan de forma clara aquellas conseguidas por otros autores. El segundo prototipo se corresponde con una antena de doble reflector que usa el reflectarray de cristal líquido como sub-reflector para escanear el haz en un plano (elevación o azimut). El objetivo básico de esta geometría es obtener mayores ganancias que en el reflectarray “single offset” con una estructura más compacta, aunque a expensas de reducir el rango de barrido. En concreto, se obtiene una ganancia máxima de 35 dBi, y un rango de barrido de 12º. Los procedimientos de síntesis de tensiones y de diseño de las estructuras de las celdas forman, en su conjunto, una herramienta completa de diseño precisa y eficiente de antenas reflectarray reconfigurables basados en cristales líquidos. Dicha herramienta se ha validado mediante el diseño, la fabricación y la medida de los prototipos anteriormente citados a 100 GHz, que consiguen algo nunca alcanzado anteriormente en la investigación de este tipo de antenas: unas prestaciones competitivas y una predicción excelente de los resultados. El procedimiento es general, y por tanto se puede usar a cualquier frecuencia en la que el cristal líquido ofrezca anisotropía dieléctrica, incluidos los THz. Los prototipos desarrollados en esta tesis doctoral suponen también unas de las primeras antenas de barrido real a frecuencias superiores a 100 GHz. En concreto, la antena de doble reflector para escaneo de haz es la primera antena reconfigurable electrónicamente a frecuencias superiores a 60 GHz que superan los 25 dBi de ganancia, siendo a su vez la primera antena de doble reflector que contiene un reflectarray reconfigurable como sub-reflector. Finalmente, se proponen ciertas mejoras que aún deben se deben realizar para hacer que estas antenas puedan ser un producto completamente desarrollado y competitivo en el mercado. ABSTRACT The work presented in this thesis is focused on the development of electronically reconfigurable antennas that are able to provide competitive electrical performance to the increasingly common applications operating at frequencies above 60 GHz. Specifically, this thesis presents the study, design, and implementation of reflectarray antennas, which incorporate liquid crystal (LC) materials to scan or reconfigure the beam electronically. From a general point of view, a liquid crystal can be defined as a material whose dielectric permittivity is variable and can be controlled with an external excitation, which usually corresponds with a quasi-static electric field (AC). By changing the dielectric permittivity at each cell that makes up the reflectarray, the phase shift on the aperture is controlled, so that a prescribed radiation pattern can be configured. Liquid Crystal-based reflectarrays have been chosen for several reasons. The first has to do with the advantages provided by the reflectarray antenna with respect to other high gain antennas, such as reflectors or phased arrays. The RF feeding in reflectarrays is achieved by using a common primary source (as in reflectors). This arrangement and the large number of degrees of freedom provided by the cells that make up the reflectarray (as in arrays), allow these antennas to provide a similar or even better electrical performance than other low profile antennas (reflectors and arrays), but assuming a more reduced cost and compactness. The second reason is the flexibility of the liquid crystal to be confined in an arbitrary geometry due to its fluidity (property of liquids). Therefore, the liquid crystal is able to adapt to a planar geometry so that it is one or more of the typical layers of this configuration. This simplifies drastically both the structure and manufacture of this type of antenna, even when compared with reconfigurable reflectarrays based on other technologies, such as diodes MEMS, etc. Therefore, the cost of developing this type of antenna is very small, which means that electrically large reconfigurable reflectarrays could be manufactured assuming low cost and greater productions. A paradigmatic example of a similar structure is the liquid crystal panel, which has already been commercialized successfully. The third reason lies in the fact that, at present, the liquid crystal is one of the few technologies capable of providing switching capabilities at frequencies above 60 GHz. In fact, the liquid crystal allows its permittivity to be switched in a wide range of frequencies, which are from DC to the visible spectrum, including microwaves and THz. Other technologies, such as ferroelectric materials, graphene or CMOS "on chip" technology also allow the beam to be switched at these frequencies. However, CMOS technology is expensive and is currently limited to frequencies below 150 GHz, and although ferroelectric materials or graphene can switch at higher frequencies and in a wider range, they have serious difficulties that make them immature. Ferroelectric materials involve the use of very high voltages to switch the material, making them unattractive, whereas the electromagnetic modelling of the graphene is still under discussion, so that the experimental results of devices based on this latter technology have not been reported yet. These three reasons make LC-based reflectarrays attractive for many applications that involve the use of electronically reconfigurable beams at frequencies beyond 60 GHz. Applications such as high resolution imaging radars, molecular spectroscopy, radiometers for atmospheric observation, or high frequency wireless communications (WiGig) are just some of them. This thesis is divided into three parts. In the first part, the most common properties of the liquid crystal materials are described, especially those exhibited in the nematic phase. The study is focused on the dielectric anisotropy (Ac) of uniaxial liquid crystals, which is defined as the difference between the parallel (e/7) and perpendicular (e±) permittivities: Ae = e,, - e±. This parameter allows the permittivity of a LC confined in an arbitrary volume at a certain biasing voltage to be described by solving a variational problem that involves both the electrostatic and elastic energies. Thus, the frequency dependence of (Ae) is also described and characterised. Note that an appropriate LC modelling is quite important to ensure enough accuracy in the phase shift provided by each cell that makes up the reflectarray, and therefore to achieve a good electrical performance at the antenna level. The second part of the thesis is focused on the design of resonant reflectarray cells based on liquid crystal. The reason why resonant cells have been chosen lies in the fact that they are able to provide enough phase range using the values of the dielectric anisotropy of the liquid crystals, which are typically small. Thus, the aim of this part is to investigate several reflectarray cell architectures capable of providing good electrical performance at the antenna level, which significantly improve the electrical performance of the cells reported in the literature. Similarly, another of the objectives is to develop a general tool to design these cells. To fulfill these objectives, the electrical yields of different types of resonant reflectarray elements are investigated, beginning from the simplest, which is made up of a single resonator and limits the state of the art. To overcome the electrical limitations of the single resonant cell, several elements consisting of multiple resonators are considered, which can be single-layer or multilayer. In a first step, the design procedure of these structures makes use of a conventional electromagnetic model which has been used in the literature, which considers that the liquid crystal behaves as homogeneous and isotropic materials whose permittivity varies between (e/7) y (e±). However, in this part of the thesis it is shown that the conventional modelling is not enough to describe the physical behaviour of the liquid crystal in reflectarray cells accurately. Therefore, a more accurate analysis and design procedure based on a more general model is proposed and developed, which defines the liquid crystal as an anisotropic three-dimensional inhomogeneous material. The design procedure is able to optimize multi-resonant cells efficiently to achieve good electrical performance in terms of bandwidth, phase range, losses, or sensitivity to the angle of incidence. The errors made when the conventional modelling (amplitude and phase) is considered have been also analysed for various cell geometries, by using measured results from several antenna prototypes made up of real liquid crystals at frequencies above 100 GHz. The measurements have been performed in a periodic environment using a quasi-optical bench, which has been designed especially for this purpose. One of these prototypes has been optimized to achieve a relatively large bandwidth (10%) at 100 GHz, low losses, a phase range of more than 360º, a low sensitivity to angle of incidence, and a low influence of the transversal inhomogeneity of the liquid crystal in the cell. The electrical yields of this prototype at the cell level improve those achieved by other elements reported in the literature, so that this prototype has been used in the last part of the thesis to perform several complete antennas for beam scanning applications. Finally, in this second part of the thesis, a novel strategy to characterise the macroscopic anisotropy using reflectarray cells is presented. The results in both RF and AC frequencies are compared with those obtained by other methods. The third part of the thesis consists on the study, design, manufacture and testing of LCbased reflectarray antennas in complex configurations. Note that the design procedure of a passive reflectarray antenna just consists on finding out the dimensions of the metallisations of each cell (which are used for phase control), using well-known optimization processes. However, in the case of reconfigurable reflectarrays based on liquid crystals, an additional step must be taken into account, which consists of accurately calculating the control voltages to be applied to each cell to configure the required phase-shift distribution on the surface of the antenna. Similarly, the structure to address the voltages at each cell and the control circuitry must be also considered. Therefore, the voltage synthesis is even more important than the design of the cell geometries (dimensions), since the voltages are directly related to the phase-shift. Several voltage synthesis procedures have been proposed in the state of the art, which are based on the experimental characterization of the phase/voltage curve. However, this characterization can be only carried out at a single angle of incidence and at certain cell dimensions, so that the synthesized voltages are different from those needed, thus giving rise to phase errors of more than 70°. Thus, the electrical yields of the LCreflectarrays reported in the literature are limited in terms of bandwidth, scanning range or side lobes level. In this last part of the thesis, a new voltage synthesis procedure has been defined and developed, which allows the required voltage to be calculated at each cell using simulations that take into account the particular dimensions of the cells, their angles of incidence, the frequency, and the AC biasing signal (frequency and waveform). The strategy is based on the modelling of each one of the permittivity states of the liquid crystal as an anisotropic substrate with longitudinal inhomogeneity (1D), or in certain cases, as an equivalent homogeneous tensor. The accuracy of both electromagnetic models is also discussed. The phase errors made by using the proposed voltage synthesis are better than 7º. In order to obtain an efficient tool to analyse and design the reflectarray, an electromagnetic analysis tool based on the Method of Moments in the spectral domain (SD-MoM) has also written and developed for anisotropic stratified media, which is used at each iteration of the voltage synthesis procedure. The voltage synthesis is also designed to minimize the effect of amplitude ripple on the radiation pattern, which is typical of reflectarrays made up of cells exhibiting high losses and represents a further advance in achieving a better antenna performance. To calculate the radiation patterns used in the synthesis procedure, an element-by-element analysis is assumed, which considers the local periodicity approach. Under this consideration, the use of a novel method is proposed, which avoids the limitation that the local periodicity imposes on the excitation. Once the appropriate strategy to calculate the voltages to be applied at each cell is developed, and once it is designed and manufactured both the structure to address the voltages to the antenna and the control circuits, two complete LC-based reflectarray antennas that operate at 100 GHz have been designed, manufactured and tested using the previously presented cells. The first prototype consists of a single offset reflectarray with beam scanning capabilities on one plane (elevation and azimuth). Although several LC-reflectarray antennas that provide 2-D scanning capabilities are also designed, and certain strategies to achieve the 2-D addressing of the voltage are proposed, the manufactured prototype addresses the voltages in one dimension in order to reduce the number of controls and manufacturing errors, and thereby validating the design tool. For an average aperture size (with a number of rows and columns of between 30 and 50 elements, which means a reflectarray with more than 900 cells), the single offset configuration provides an antenna gain of between 20 and 30 dBi and a large scanning range. The prototype tested at 100 GHz exhibits an electronically scanned beam in an angular range of 55º and 8% of bandwidth, in which the side lobe level (SLL) remains better than -13 dB. The maximum gain is 19.4 dBi. The electrical performance of the antenna is clearly an improvement on those achieved by other authors in the state of the art. The second prototype corresponds to a dual reflector antenna with a liquid crystal-based reflectarray used as a sub-reflector for beam scanning in one plane (azimuth or elevation). The main objective is to obtain a higher gain than that provided by the single offset configuration, but using a more compact architecture. In this case, a maximum gain of 35 dBi is achieved, although at the expense of reducing the scanning range to 12°, which is inherent in this type of structure. As a general statement, the voltage synthesis and the design procedure of the cells, jointly make up a complete, accurate and efficient design tool of reconfigurable reflectarray antennas based on liquid crystals. The tool has been validated by testing the previously mentioned prototypes at 100 GHz, which achieve something never reached before for this type of antenna: a competitive electrical performance, and an excellent prediction of the results. The design procedure is general and therefore can be used at any frequency for which the liquid crystal exhibits dielectric anisotropy. The two prototypes designed, manufactured and tested in this thesis are also some of the first antennas that currently operate at frequencies above 100 GHz. In fact, the dual reflector antenna is the first electronically scanned dual reflector antenna at frequencies above 60 GHz (the operation frequency is 100 GHz) with a gain greater than 25 dBi, being in turn the first dual-reflector antenna with a real reconfigurable sub-reflectarray. Finally, some improvements that should be still investigated to make these antennas commercially competitive are proposed.

La Ordenación del Territorio en las Ciudades Globales Europeas: El caso de Madrid

En la Comunidad de Madrid el modelo de ocupación del territorio en las dos últimas décadas ha obedecido a factores de oferta del mercado y no a las necesidades de la población, ello provoca un consumo de suelo y de recursos que conducen a una sobrexplotación insostenible. Las metrópolis globales están experimentando rápidas e intensas transformaciones, basadas en los paradigmas emergentes de la globalización, la gobernanza, la metropolizacion y la dispersión de las actividades en el territorio y a través de ellos se abordan los planes de Londres, París y las tentativas de Madrid. La globalización provoca la pérdida de soberanía de las administraciones publicas y la competitividad entre las ciudades globales en Europa, Londres, Paris y Madrid, son centros de poder, de concentración y crecimiento donde se produce la dualización del espacio y donde la desigualdad participa de la restructuración urbana, concentración de pobreza frente a espacios de la nueva clase emergente en donde dominan los sectores de servicios y las tecnologías de la información. Frente al desarrollo urbano neoliberal de regulación a través del mercado y basada en criterios de eficiencia de la Nueva Gestión Pública, se vislumbra la posibilidad de que la sociedad se administre a si misma por medio de acciones voluntarias y responsables que promuevan los intereses colectivos mediante el reconocimiento de su propia identidad, introduciendo el concepto de gobernanza. Frente, a la explotación del territorio por parte de la sociedad extractiva que genera corrupcion, se propone un modelo de cooperación público-privada basado en la confianza mutua, un marco regulador estable, la transparencia y la información a cuyo flujo más homogéneo contribuirán sin duda las TICs. En todo este proceso, las regiones metropolitanas en Europa se erigen como motores del crecimiento, donde los límites administrativos son superados, en un territorio cada vez más extendido y donde los gobiernos locales tienen que organizarse mediante un proceso de cooperación en la provisión de servicios que ayuden a evitar los desequilibrios territoriales. El fenómeno de la dispersión urbana en desarrollos de baja densidad, los centros comerciales periféricos, la expulsión hacia la periferia de las actividades de menor valor añadido y la concentración de funciones directivas en el centro, conducen a una fragmentación del territorio en islas dependientes del automóvil y a procesos de exclusión social por la huida de las rentas altas y la expulsión de las rentas bajas de los centros urbanos. Se crean fragmentos monofuncionales y discontinuos, apoyados en las autovías, lugares carentes de identidad y generadores de despilfarro de recursos y una falta de sostenibilidad ambiental, económica y social. El estudio de la cultura de la planificación en Europa ayuda a comprender los diferentes enfoques en la ordenación del territorio y el proceso de convergencia entre las diferentes regiones. Los documentos de la UE se basan en la necesidad de la competitividad para el crecimiento europeo y la cohesión social y en relación al territorio en los desarrollos policéntricos, la resolución del dualismo campo-ciudad, el acceso equilibrado a las infraestructuras, la gestión prudente de la naturaleza, el patrimonio y el fomento de la identidad. Se proponen dos niveles de estudio uno actual, los últimos planes de Londres y Paris y el otro la evolución de las tentativas de planes en la Región madrileña siempre en relación a los paradigmas emergentes señalados y su reflejo en los documentos. El Plan de Londres es estratégico, con una visión a largo plazo, donde se confiere un gran interés al proceso, al papel del alcalde como líder y su adaptación a las circunstancias cambiantes, sujeto a las incertidumbres de una ciudad global. El desarrollo del mismo se concibe a través de la colaboración y cooperación entre las administraciones y actores. La estructura del documento es flexible, establece orientaciones y guías indicativas, para la redacción de los planes locales, no siendo las mismas vinculantes y con escasa representación grafica. El Plan de París es más un plan físico, similar al de otros centros europeos, trabaja sobre los sectores y sobre los territorios, con información extensa, con características de “Plan Latino” por la fuerza de la expresión gráfica, pero al mismo tiempo contiene una visión estratégica. Es vinculante en sus determinaciones y normativas, se plantea fomentar, pero también prohibir. Ambos planes tratan la competitividad internacional de sus centros urbanos, la igualdad social, la inclusión de todos los grupos sociales y la vivienda como una cuestión de dignidad humana. Londres plantea la gobernanza como cooperación entre sector público-privado y la necesaria cooperación con las regiones limítrofes, en París las relaciones están más institucionalizadas resaltando la colaboración vertical entre administraciones. Ambos plantean la densificación de nodos servidos por transporte público, modos blandos y el uso los TODs y la preservación de la infraestructura verde jerarquizada, la potenciación de la red azul y la mejora del paisaje de las periferias. En las “tentativas” de planes territoriales de Madrid se constata que estuvieron sujetas a los ciclos económicos. El primer Documento las DOT del año 1984, no planteaba crecimiento, ni económico ni demográfico, a medio plazo y por ello no proponía una modificación del modelo radio concéntrico. Se trataba de un Plan rígido volcado en la recuperación del medio rural, de la ciudad, el dimensionamiento de los crecimientos en función de las dotaciones e infraestructuras existentes. Aboga por la intervención de la administración pública y la promoción del pequeño comercio. Destaca el desequilibrio social en función de la renta, la marginación de determinados grupos sociales, el desequilibrio residencia/empleo y la excesiva densidad. Incide en la necesidad de viviendas para los más desfavorecidos mediante el alquiler, la promoción suelo público y la promoción del ferrocarril para dar accesibilidad al espacio central. Aboga por el equipamiento de proximidad y de pequeño tamaño, el tratamiento paisajístico de los límites urbanos de los núcleos y el control de las actividades ilegales señalando orientaciones para el planeamiento urbano. Las Estrategias (1989) contienen una visión: la modificación del modelo territorial, mediante la intervención pública a través de proyectos. Plantea la reestructuración económica del territorio, la reconversión del aparato productivo, la deslocalización de actividades de escaso valor añadido y una mayor ubicuidad de la actividad económica. Incide en la difusión de la centralidad hacia el territorio del sur, equilibrándolo con el norte, tratando de recomponer empleo y residencia, integrando al desarrollo económico las periferias entre sí y con el centro. Las actuaciones de transporte consolidarían las actuaciones, modificando el modelo radio concéntrico facilitando la movilidad mediante la red de cercanías y la intermodalidad. El plan se basaba en el liderazgo del Consejero, no integrando sectores como el medio ambiente, ni estableciendo un documento de seguimiento de las actuaciones que evaluara los efectos de las políticas y su aportación al equilibrio territorial, a través de los proyectos realizados. El Documento Preparatorio de las Bases (1995), es más de un compendio o plan de planes, recoge análisis y propuestas de los documentos anteriores y de planes sectoriales de otros departamentos. Presenta una doble estructura: un plan físico integrador clásico, que abarca los sectores y territorios, y recoge las Estrategias previas añadiendo puntos fuertes, como el malestar urbano y la rehabilitación el centro. Plantea la consecución del equilibrio ambiental mediante el crecimiento de las ciudades existentes, la vertebración territorial basada en la movilidad y en la potenciación de nuevas centralidades, la mejora de la habitabilidad y rehabilitación integral del Centro Urbano de Madrid, y la modernización del tejido productivo existente. No existe una idea-fuerza que aglutine todo el documento, parte del reconocimiento de un modelo existente concentrado y congestivo, un centro urbano dual y dos periferias al este y sur con un declive urbano y obsolescencia productiva y al oeste y norte con una dispersión que amenaza al equilibrio medioambiental. Señala como aspectos relevantes, la creciente polarización y segregación social, la deslocalización industrial, la aparición de las actividades de servicios a las empresas instaladas en las áreas metropolitanas, y la dispersión de las actividades económicas en el territorio por la banalización del uso del automóvil. Se plantea el reto de hacer ciudad de la extensión suburbana y su conexión con el sistema metropolitano, mediante una red de ciudades integrada y complementaria, en búsqueda de un mayor equilibrio y solidaridad territorial. Las Bases del PRET (1997) tenían como propósito iniciar el proceso de concertación en que debe basarse la elaboración del Plan. Parte de la ciudad mediterránea compacta, y diversa, y de la necesidad de que las actividades económicas, los servicios y la residencia estén en proximidad, resolviéndolo mediante una potente red de transporte público que permitiese una accesibilidad integrada al territorio. El flujo de residencia hacia la periferia, con un modelo ajeno de vivienda unifamiliar y la concentración del empleo en el centro producen desequilibrio territorial. Madrid manifiesta siempre apostó por la densificación del espacio central urbanizado, produciendo su congestión, frente al desarrollo de nuevos suelos que permitieran su expansión territorial. Precisa que es necesario preservar los valores de centralidad de Madrid, como generador de riqueza, canalizando toda aquella demanda de centralidad, hacia espacios más periféricos. El problema de la vivienda no lo ve solo como social, sino como económico, debido a la pérdida de empleos que supone su paralización. Observa ya los crecimientos residenciales en el borde de la region por el menor valor del suelo. Plantea como la política de oferta ha dado lugar a un modelo de crecimiento fragmentado, desequilibrado, desestructurado, con fuertes déficits dotacionales y de equipamiento, que inciden en la segregación espacial de las rentas, agravando el proceso de falta de identidad morfológica y de desarraigo de los valores urbanos. El plan señalaba que la presión sobre el territorio creaba su densificación por las limitaciones de espacio, Incidía en limitar el peso de la intervención pública, no planteando propuestas de cooperación público-privado. La mayor incoherencia estriba en que los objetivos eran innovadores y coinciden en su mayoría con las propuestas estudiadas de Londres o Paris, pero se intentan implementar a través de un cambio hacia un modelo reticulado homogéneo, expansivo sobre el territorio, que supone un consumo de suelo y de infraestructuras para solucionar un problema inexistente, la gestión de la densidad. Durante las dos últimas décadas en ausencia de un plan regional, la postura neoliberal fue la de un exclusivo control de legalidad del planeamiento, los municipios entraron en un proceso de competencia para aprovechar las iniciales ventajas económicas de los crecimientos detectados, que proporcionaban una base económica “sólida” a unos municipios con escasos recursos en sus presupuestos municipales. La legislación se modifica a requerimiento de grupos interesados, no existiendo un marco estable. Se pierde la figura del plan no solo a nivel regional, si no en los sectores y el planeamiento municipal donde los municipios tiende a basarse en modificaciones puntuales con la subsiguiente pérdida del modelo urbanístico. La protección ambiental se estructura mediante un extenso nivel de figuras, con diversidad de competencias que impide su efectiva protección y control. Este proceso produce un despilfarro en la ocupación del suelo, apoyada en las infraestructuras viarias, y un crecimiento disperso y de baja densidad, cada vez más periférico, produciéndose una segmentación social por dualización del espacio en función de niveles de renta. Al amparo del boom inmobiliario, se produce una falta de política social de vivienda pública, más basada en la dinamización del mercado con producción de viviendas para rentas medias que en políticas de alquiler para determinados grupos concentrándose estas en los barrios desfavorecidos y en la periferia sur. Se produce un incremento de la vivienda unifamiliar, muchas veces amparada en políticas públicas, la misma se localiza en el oeste principalmente, en espacios de valor como el entorno del Guadarrama o con viviendas más baratas por la popularización de la tipología en la frontera de la Región. El territorio se especializa a modo de islas monofuncionales, las actividades financieras y de servicios avanzados a las empresas se localizan en el norte y oeste próximo, se pierde actividad industrial que se dispersa más al sur, muchas veces fuera de la región. Se incrementan los grandes centros comerciales colgados de las autovías y sin población en su entorno. Todo este proceso ha provocado una pérdida de utilización del transporte público y un aumento significativo del uso del vehículo privado. En la dos últimas décadas se ha producido en la región de Madrid desequilibrio territorial y segmentación social, falta de implicación de la sociedad en el territorio, dispersión del crecimiento y un incremento de los costes ambientales, sociales y económicos, situación, que solo, a través del uso racional del territorio se puede reconducir, apoyado en una planificación integrada sensible y participativa. ABSTRACT In Madrid the model of land occupation in the past two decades has been driven by market supply factors rather than the needs of the population. This results in a consumption of land and resources that leads to unsustainable overexploitation. Addressing this issue must be done through sensitive and participatory integrated planning. Global cities are experiencing rapid and intense change based on the emerging paradigms of globalization, governance, metropolization and the dispersion of activities in the territory. Through this context, a closer look will be taken at the London and Paris plans as well as the tentative plans of Madrid. Globalization causes the loss of state sovereignty and the competitiveness among global cities in Europe; London, Paris and Madrid. These are centres of power, concentration and growth where the duality of space is produced, and where inequality plays a part in urban restructuration. There are concentrated areas of poverty versus areas with a new emerging class where the services sector and information technologies are dominant. The introduction of ICTs contributes to a more homogeneous flow of information leading, us to the concept of governance. Against neoliberal urban development based on free market regulations and efficiency criteria as established by the “New Public Management”, emerge new ways where society administers itself through voluntary and responsible actions to promote collective interests by recognizing their own identity. A new model of public-private partnerships surfaces that is based on mutual trust, transparency, information and a stable regulatory framework in light of territorial exploitation by the “extractive society” that generates corruption. Throughout this process, European metropolitan regions become motors of growth where administrative boundaries are overcome in an ever expanding territory where government is organized through cooperative processes to provide services that protect against regional imbalances. Urban sprawl or low-density development as seen in peripheral shopping centres, the off-shoring of low added-value activities to the periphery, and the concentration of business and top management functions in the centre, leads to a fragmentation of the territory in automobile dependent islands and a process of social exclusion brought on by the disappearance of high incomes. Another effect is the elimination of low income populations from urban centres. In consequence, discontinuous expansions and mono-functional places that lack identity materialize supported by a highway network and high resource consumption. Studying the culture of urban planning in Europe provides better insight into different approaches to spatial planning and the process of convergence between different regions. EU documents are based on the need of competitiveness for European growth and social cohesion. In relation to polycentric development territory they are based on a necessity to solve the dualism between field and city, balanced access to infrastructures, prudent management of nature and solidifying heritage and identity Two levels of study unfold, the first being the current plans of London and Île-de-France and the second being the evolution of tentative plans for the Madrid region as related to emerging paradigms and how this is reflected in documents. The London Plan is strategic with a long-term vision that focuses on operation, the role of the mayor as a pivotal leader, and the adaptability to changing circumstances brought on by the uncertainties of a global city. Its development is conceived through collaboration and cooperation between governments and stakeholders. The document structure is flexible, providing guidance and indicative guidelines on how to draft local plans so they are not binding, and it contains scarce graphic representation. The Plan of Paris takes on a more physical form and is similar to plans of other European centres. It emphasizes sectors and territories, using extensive information, and is more characteristic of a “Latin Plan” as seen in its detailed graphic expression. However, it also contains a strategic vision. Binding in its determinations and policy, it proposes advancement but also prohibition. Both plans address the international competitiveness of urban centres, social equality, inclusion of all social groups and housing as issues of human dignity. London raises governance and cooperation between public and private sector and the need for cooperation with neighbouring regions. In Paris, the relations are more institutionalized highlighting vertical collaboration between administrations. Both propose nodes of densification served by public transportation, soft modes and the use of TOD, the preservation of a hierarchical green infrastructure, and enhancing the landscape in urban peripheries. The tentative territorial plans for the Madrid region provide evidence that they were subject to economic cycles. The first document of master guidelines (1984) does not address either economic or demographic growth in the mid term and therefore does not propose the modification of the radio-concentric model. It is a rigid plan focused on rural and urban recovery and the dimensioning of growth that depends on endowments and infrastructures. It advocates government intervention and promotes small business. The plan emphasizes social imbalance in terms of income, marginalization of certain social groups, the imbalance of residence/employment and excessive density. It stresses the need for social rent housing for the underprivileged, promotes public land, and the supports rail accessibility to the central area. It backs facilities of proximity and small size, enhancing the landscaping of city borders, controlling illegal activities and draws out guidelines for urban planning. The strategies (1989) contain a vision: Changing the territorial model through public intervention by means of projects. They bring to light economic restructuring of territory, the reconversion of the productive apparatus, relocation of low value-added activities, and greater ubiquity of economic activity. They also propose the diffusion of centrality towards southern territories, balancing it with the north in an attempt to reset employment and residence that integrates peripheral economic development both in the periphery and the centre. Transport would consolidate the project, changing the radius-concentric model and facilitating mobility through a commuter and inter-modality network. The plan derives itself from the leadership of the minister and does not integrate sectors such as environment. It also does not incorporate the existence of a written document that monitors performance to evaluate the effects of policies and their contribution to the territorial balance. The Preparatory Document of the Bases, (1995) is more a compendium, or plan of plans, that compiles analysis and proposals from previous documents and sectorial plans from other departments. It has a dual structure: An integrating physical plan covering the sectors and territories that includes the previous strategies while adding some strengths. One such point is the urban discomfort and the rehabilitation of the centre. It also poses the achievement of environmental balance through the growth of existing cities, the territorial linking based on mobility, strengthening new centres, improving the liveability and comprehensive rehabilitation of downtown Madrid, and the modernization of the existing production network. There is no one powerful idea that binds this document. This is due to the recognition of an existing concentrate and congestive model, a dual urban centre, two eastern and southern suburbs suffering from urban decay, and an obsolescent productive north and west whose dispersion threatens the environmental balance. Relevant aspects the document highlights are increasing polarization and social segregation, industrial relocation, the emergence of service activities to centralized companies in metropolitan areas and the dispersion of economic activities in the territory by the trivialization of car use. It proposes making the city from the suburban sprawl and its connection to the metropolitan system through a network of integrated and complementary cities in search of a better balance and territorial solidarity. The Bases of PRET (1997) aims to start the consultation process that must underpin the development of the plan. It stems from a compact and diverse Mediterranean city along with the need for economic activities, services and residences that are close. To resolve the issue, it presents a powerful network of public transport that allows integrated accessibility to the territory. The flow of residence to the periphery based on a foreign model of detached housing and an employment concentration in the centre produces territorial imbalance. Madrid always opted for the densification of the central space, producing its congestion, against the development of new land that would allow its territorial expansion. The document states that the necessity to preserve the values of the housing problem is not only viewed as social, but also economic due to the loss of jobs resulting from their paralysis. It notes the residential growth in the regional border due to the low price of land and argues that the policy of supply has led to a fragmented model of growth that is unbalanced, unstructured, with strong infrastructure and facility deficits that affect the spatial segregation of income and aggravate the lack of morphological identity, uprooting urban values. The pressure on the territory caused its densification due to space limitation; the proposed grid model causes land consumption and infrastructure to solve a non-problem, density. Focusing on limiting the weight of public intervention, it does not raise proposals for public-private cooperation. The biggest discrepancy is that the targets were innovative and mostly align with the proposals in London and Paris. However, it proposes to be implemented through a shift towards a uniform gridded model that is expansive over territory. During the last two decades, due to the absence of a regional plan, a neoliberal stance held exclusive control of the legality of urban planning. The municipalities entered a competition process to take advantage of initial economic benefits of such growth. This provided a “solid” economic base for some municipalities with limited resources in their municipal budgets. The law was amended without a legal stable framework at the request of stakeholders. The character of the plan is lost not only regionally, but also in the sectors and municipal planning. This tends to be based on specific changes with the loss of an urban model. Environmental protection is organized through an extensive number of protection figures with diverse competencies that prevent its effective protection. This process squanders the use of the land, backed by increasing road infrastructure, dispersed occupations with low-density growth causing a social segmentation due to space duality based on income levels. During the housing boom, there is a reduction in social public housing policy mostly due to a boost in the market of housing production for average incomes than in rental policies for needy social groups that focus on disadvantaged neighbourhoods and southern suburbs. As a result, there is an increase in single-family housing, often protected by public policy. This is located primarily in the west in areas of high environmental value such as Guadarrama. There is also cheaper housing due to the popularization of typology in the border region. There, territory works as a mono-functional islands. Financial activities and advanced services for companies are located to the north and west where industrial activity is lost as it migrates south, often outside the region. The number of large shopping centres hanging off the highway infrastructure with little to no surrounding population increases. This process leads to the loss of dependency on public transport and a significant increase in the use of private vehicles. The absence of regional planning has produced more imbalance, more social segmentation, more dispersed growth and a lot of environmental, social and economic costs that can only be redirected through rational territorial.

Influence of glycerin and lecithin inclusion in the diet on liver characteristics and lipid fraction in the serum of brownegg laying hens at 55 week of age

The effects of the inclusion of raw glycerin (GLYC) and raw lecithin, in the diet (23 to 55 wk) on liver characteristics and various serum lipid fractions were studied in brown egg-laying hens at 55 wk of age. The control diets were based on corn, soybean meal, and 4% supplemental fat and contained 2,750 kcal AMEn/kg, 16.5% CP, and 0.73% digestible Lys. The diets were arranged as a 2 × 3 factorial with 2 levels of GLYC (0 and 7%) and 3 animal fat to lecithin ratios (4:0, 2:2, and 0:4%). Each treatment was replicated 8 times and the experimental unit was a cage with 10 hens. At 55 wk of age, 2 hens per cage replicate were randomly selected, weighed individually, and slaughtered by CO2 inhalation. Liver was immediately removed and weighed and the color recorded by spectrophotometry. In addition, blood samples from one bird per replicate were collected from the wing vein and the concentration of total cholesterol, low and high density lipoprotein cholesterol, and triglycerides were determined. The data were analyzed as a completely randomized design and the main effects of GLYC and lecithin content of the diet and the interactions were determined. No interactions between GLYC and lecithin content of the diets were detected for any of the variables studied. Liver characteristics and serum lipid traits were not affected by the inclusion of GLYC in the diet. The substitution of animal fat by lecithin, however, reduced the redness (a* 14.9 to 13.8) and yellowness (b* 8.60 to 7.20) values of the liver (P < 0.05) but did not affect the content of serum lipid fractions. It is concluded that the inclusion of GLYC and lecithin in the diet did not affect liver size or serum lipid fraction. However, the inclusion of lecithin reduced the a* and b* value of the liver

GovCloud: the usage of cloud computing in public organizations

It has been shown that cloud computing brings cost benefits and promotes efficiency in the operations of the organizations, no matter what their type or size. However, few public organizations are benefiting from this new paradigm shift in the way the organizations consume and manage computational resources. The objective of this thesis is to analyze both internal and external factors that may influence the adoption of cloud computing by public organizations and propose possible strategies that can assist these organizations in their path to cloud usage. In order to achieve this objective, a SWOT analysis has been conducted, detecting internal factors (strengths and weaknesses) and external factors (opportunities and threats) that can influence the adoption of a governmental cloud. With the application of a TOWS matrix, by combining the internal and external factors, a list of possible strategies have been formulated to be used as a guide to decision-making related to the transition to a cloud environment.

Regulation of the human ether-a-gogo related gene (HERG) K+ channels by reactive oxygen species

Human ether-a-gogo related gene (HERG) K+ channels are key elements in the control of cell excitability in both the cardiovascular and the central nervous systems. For this reason, the possible modulation by reactive oxygen species (ROS) of HERG and other cloned K+ channels expressed in Xenopus oocytes has been explored in the present study. Exposure of Xenopus oocytes to an extracellular solution containing FeSO4 (25–100 μM) and ascorbic acid (50–200 μM) (Fe/Asc) increased both malondialdehyde content and 2′,7′-dichlorofluorescin fluorescence, two indexes of ROS production. Oocyte perfusion with Fe/Asc caused a 50% increase of the outward K+ currents carried by HERG channels, whereas inward currents were not modified. This ROS-induced increase in HERG outward K+ currents was due to a depolarizing shift of the voltage-dependence of channel inactivation, with no change in channel activation. No effect of Fe/Asc was observed on the expressed K+ currents carried by other K+ channels such as bEAG, rDRK1, and mIRK1. Fe/Asc-induced stimulation of HERG outward currents was completely prevented by perfusion of the oocytes with a ROS scavenger mixture (containing 1,000 units/ml catalase, 200 ng/ml superoxide dismutase, and 2 mM mannitol). Furthermore, the scavenger mixture also was able to reduce HERG outward currents in resting conditions by 30%, an effect mimicked by catalase alone. In conclusion, the present results seem to suggest that changes in ROS production can specifically influence K+ currents carried by the HERG channels.

c-Myc enhances protein synthesis and cell size during B lymphocyte development

Members of the myc family of nuclear protooncogenes play roles in cell proliferation, differentiation, and apoptosis. Moreover, inappropriate expression of c-myc genes contributes to the development of many types of cancers, including B cell lymphomas in humans. Although Myc proteins have been shown to function as transcription factors, their immediate effects on the cell have not been well defined. Here we have utilized a murine model of lymphomagenesis (Eμ-myc mice) to show that constitutive expression of a c-myc transgene under control of the Ig heavy-chain enhancer (Eμ) results in an increase in cell size of normal pretransformed B lymphocytes at all stages of B cell development. Furthermore, we show that c-Myc-induced growth occurs independently of cell cycle phase and correlates with an increase in protein synthesis. These results suggest that Myc may normally function by coordinating expression of growth-related genes in response to mitogenic signals. Deregulated c-myc expression may predispose to cancer by enhancing cell growth to levels required for unrestrained cell division.

Polyazamacrolides from ladybird beetles: Ring-size selective oligomerization

The pupal defensive secretion of the 24-pointed ladybird beetle, Subcoccinella vigintiquatuorpunctata, consists of a mixture of macrocyclic polyamines, dominated by the three dimeric, 30-membered macrocycles 11-13, derived from the two building blocks 11-(2-hydoxyethylamino)-5-tetradecenoic acid (9) and 11-(2-hydoxyethylamino)-5,8-tetradecadienoic acid (10). Smaller amounts of the four possible cyclic trimers of 9 and 10 were also detected, corresponding to 45-membered macrocycles. Structural assignments were based on NMR-spectroscopic investigations and HPLC–MS analyses. In addition, the all-S absolute configuration of the S. vigintiquatuorpunctata macrocycles was determined by comparison of derivatives of the natural material with enantiomerically pure synthetic samples. Comparing this alkaloid mixture with that of the pupal defensive secretion in related ladybird beetle species indicates that the degree of oligomerization of the 2-hydroxyethylamino carboxylic acid building blocks can be carefully controlled by the insects.

Attenuated T2 relaxation by mutual cancellation of dipole–dipole coupling and chemical shift anisotropy indicates an avenue to NMR structures of very large biological macromolecules in solution

Fast transverse relaxation of 1H, 15N, and 13C by dipole-dipole coupling (DD) and chemical shift anisotropy (CSA) modulated by rotational molecular motions has a dominant impact on the size limit for biomacromolecular structures that can be studied by NMR spectroscopy in solution. Transverse relaxation-optimized spectroscopy (TROSY) is an approach for suppression of transverse relaxation in multidimensional NMR experiments, which is based on constructive use of interference between DD coupling and CSA. For example, a TROSY-type two-dimensional 1H,15N-correlation experiment with a uniformly 15N-labeled protein in a DNA complex of molecular mass 17 kDa at a 1H frequency of 750 MHz showed that 15N relaxation during 15N chemical shift evolution and 1HN relaxation during signal acquisition both are significantly reduced by mutual compensation of the DD and CSA interactions. The reduction of the linewidths when compared with a conventional two-dimensional 1H,15N-correlation experiment was 60% and 40%, respectively, and the residual linewidths were 5 Hz for 15N and 15 Hz for 1HN at 4°C. Because the ratio of the DD and CSA relaxation rates is nearly independent of the molecular size, a similar percentagewise reduction of the overall transverse relaxation rates is expected for larger proteins. For a 15N-labeled protein of 150 kDa at 750 MHz and 20°C one predicts residual linewidths of 10 Hz for 15N and 45 Hz for 1HN, and for the corresponding uniformly 15N,2H-labeled protein the residual linewidths are predicted to be smaller than 5 Hz and 15 Hz, respectively. The TROSY principle should benefit a variety of multidimensional solution NMR experiments, especially with future use of yet somewhat higher polarizing magnetic fields than are presently available, and thus largely eliminate one of the key factors that limit work with larger molecules.