Results of analysis and model simulation of the bed profiles

Bedforms such as dunes and ripples are ubiquitous in rivers and coastal seas, and commonly described as triangular shapes from which height and length are calculated to estimate hydrodynamic and sediment dynamic parameters. Natural bedforms, however, present a far more complicated morphology; the difference between natural bedform shape and the often assumed triangular shape is usually neglected, and how this may affect the flow is unknown. This study investigates the shapes of natural bedforms and how they influence flow and shear stress, based on four datasets extracted from earlier studies on two rivers (the Rio Paraná in Argentina, and the Lower Rhine in The Netherlands). The most commonly occurring morphological elements are a sinusoidal stoss side made of one segment and a lee side made of two segments, a gently sloping upper lee side and a relatively steep (6 to 21°) slip face. A non-hydrostatic numerical model, set up using Delft3D, served to simulate the flow over fixed bedforms with various morphologies derived from the identified morphological elements. Both shear stress and turbulence increase with increasing slip face angle and are only marginally affected by the dimensions and positions of the upper and lower lee side. The average slip face angle determined from the bed profiles is 14°, over which there is no permanent flow separation. Shear stress and turbulence above natural bedforms are higher than above a flat bed but much lower than over the often assumed 30° lee side angle.

Applications of capillary electrophoresis and mass spectrometry for the analysis of thiosalts

Thiosalt species are unstable, partially oxidized sulfur oxyanions formed in sulfur-rich environments but also during the flotation and milling of sulfidic minerals especially those containing pyrite (FeS₂) and pyrrhotite (Fe₍₁₋ₓ₎S, x = 0 to 0.2). Detecting and quantifying the major thiosalt species such as sulfate (SO₄²⁻), thiosulfate (S₂O₃²⁻), trithionate (S₃O₆²⁻), tetrathionate (S₄O₆²⁻) and higher polythionates (SₓO₆²⁻, where 3 ≤ x ≤ 10) in the milling process and in the treated tailings is important to understand how thiosalts are generated and provides insight into potential treatment. As these species are unstable, a fast and reliable analytical technique is required for their analysis. Three capillary zone electrophoresis (CZE) methods using indirect UV-vis detection were developed for the simultaneous separation and determination of five thiosalt anions: SO₄²⁻, S₂O₃²⁻, S₃O₆²⁻, S₄O₆²⁻ and S₅O₆²⁻. Both univariate and multivariate experimental design approaches were used to optimize the most critical factors (background electrolyte (BGE) and instrumental conditions) to achieve fast separation and quantitative analysis of the thiosalt species. The mathematically predicted responses for the multivariate experiments were in good agreement with the experimental results. Limits of detection (LODs) (S/N = 3) for the methods were between 0.09 and 0.34 μg/mL without a sample stacking technique and nearly four-fold increase in LODs with the application of field-amplified sample stacking. As direct analysis of thiosalts by mass spectrometry (MS) is limited by their low m/z values and detection in negative mode electrospray ionization (ESI), which is typically less sensitive than positive ESI, imidazolium-based (IP-L-Imid and IP-T-Imid) and phosphonium-based (IP-T-Phos) tricationic ion-pairing reagents were used to form stable high mass ions non-covalent +1 ion-pairs with these species for ESI-MS analysis and the association constants (Kassoc) determined for these ion-pairs. Kassoc values were between 6.85 × 10² M⁻¹ and 3.56 × 10⁵ M⁻¹ with the linear IP-L-Imid; 1.89 ×10³ M⁻¹ and 1.05 × 10⁵ M⁻¹ with the trigonal IP-T-Imid ion-pairs; and 7.51×10² M⁻¹ and 4.91× 10⁴ M⁻¹ with the trigonal IP-T-Phos ion-pairs. The highest formation constants were obtained for S₃O₆²⁻ and the imidazolium-based linear ion-pairing reagent (IP-L-Imid), whereas the lowest were for IP-L-Imid: SO₄²⁻ ion-pair.

An automatic method of above-water iceberg 3-D profiling based on autonomous surface craft (ASC) using surface images and LIDAR

This thesis reports on a novel method to build a 3-D model of the above-water portion of icebergs using surface imaging. The goal is to work towards the automation of iceberg surveys, allowing an Autonomous Surface Craft (ASC) to acquire shape and size information. After collecting data and images, the core software algorithm is made up of three parts: occluding contour finding, volume intersection, and parameter estimation. A software module is designed that could be used on the ASC to perform automatic and fast processing of above-water surface image data to determine iceberg shape and size measurement and determination. The resolution of the method is calculated using data from the iceberg database of the Program of Energy Research and Development (PERD). The method was investigated using data from field trials conducted through the summer of 2014 by surveying 8 icebergs during 3 expeditions. The results were analyzed to determine iceberg characteristics. Limitations of this method are addressed including its accuracy. Surface imaging system and LIDAR system are developed to profile the above-water iceberg in 2015.

Ichnology and palaeobiology of Phoebichnus trochoides and Schaubcylindrichnus heberti comb. nov.

The three-dimensional reconstructions of Phoebichnus trochoides and Schaubcylindrichnus (Palaeophycus) heberti created as part of this thesis allow us to fully understand and characterize the three-dimensional morphology and palaeobiology of these common taxa. Three-dimensional reconstructions demonstrate that P. trochoides is a large stellate burrow composed of numerous long galleries produced by a deposit feeding organism. This study reports for the first time that the central zone is composed of stacked disk-shaped layers of highly bioturbated sediment, the radial burrows are composed of a sand-rich lining of pelleted annuli surrounding an active sand-rich fill, and the presence of subtle conical features above the radial galleries that are inferred to result from collapse cone feeding. Reconstructions of heberti demonstrate that the thick walled burrows are composed of sand-rich annular rings, are a broad U-shape, and may be either clustered or isolated. Our observations show that the morphology of heberti is inconsistent with the generic diagnosis of Palaeophycus, but is morphologically comparable to Schaubcylindrichnus, and is herein synonymised with Schaubcylindrichnus to create S. heberti comb. nov. The three-dimensional reconstructions have revealed a number of hitherto unknown morphological elements to both taxa which has facilitated new interpretations of the trace-makers behaviour. The data improves the taxonomic understanding of both P. trochoides and S. heberti which require significant taxonomic change and emendation of diagnoses at the species and genus level.

Description and composition iron-manganese concretions from the Pacific

One the most interesting features of ocean sedimentation is the manganese formations on the surface of the ocean floor in some areas. These are especially widespread in the Pacific Ocean as concretions, grains, and crusts on rock fragments and bedrock outcrops. Iron-manganese concretions are the most abundant as they completely cover about 10% of the bottom of the Pacific Ocean where there are ore concentrations. The concretions occupy from 20-50% of the bottom and up to 80-90% on separate submarine rises. Such concretions are found in different types of bottom deposits, from abyssal red clays to terrigenous muds, but they occur most widely in red clays and quite often in carbonate muds. Their shape and their dimensions are very diverse and change from place to place, from station to station, varying from 0.5-20 cm. They may be oval, globular, reniform, or slaggy and often they are fiat or isometric concretions of an indefinite shape. The concretions generally have nuclei of pumice, basalt fragments, clayey and tuffaceous material, sharks' teeth, whale ossicles, and fossil sponges. Most concretions have concentric layers, combined with dendritic ramifications of iron and manganese oxides.

Nanostructured copper oxides and phosphates from a new solid-state route

Nanostructured copper containing materials of CuO, Cu3(PO4)3 and Cu2P2O7 have been prepared by solid-state pyrolysis of molecular CuCl2·NC5H4OH (I), CuCl2·CNCH2C6H4OH (II), oligomeric [Cu(PPh3)Cl]4 (III), N3P3[OC6H4CH2CN·CuCl]6[PF6] (IV), N3P3[OC6H5]5[OC5H4N·Cu][PF6] (V), polymeric chitosan·(CuCl2)n (VI) and polystyrene-co-4-vinylpyridine PS-b-4-PVP·(CuCl2) (VII) precursors. The products strongly depend on the precursor used. The pyrolytic products from phosphorus-containing precursors (III), (IV) and (V) are Cu phosphates or pyrophosphates, while non-phosphorous-containing precursors (VI) and (VII), result in mainly CuO. The use of chitosan as a solid-state template/stabilizer induces the formation of CuO and Cu2O nanoparticles. Copper pyrophosphate (Cu2P2O7) deposited on Si using (IV) as the precursor exhibits single-crystal dots of average diameter 100 nm and heights equivalent to twice the unit cell b-axis (1.5–1.7 nm) and an areal density of 5.1–7.7 Gigadots/in.2. Cu2P2O7 deposited from precursor (VI) exhibits unique labyrinthine high surface area deposits. The morphology of CuO deposited on Si from pyrolysis of (VI) depends on the polymer/Cu meta ratio. Magnetic measurements performed using SQUID on CuO nanoparticle networks suggest superparamagnetic behavior. The results give insights into compositional, shape and morphological control of the as-formed nanostructures through the structure of the precursors.

Design, Synthesis, and Photophysical Investigation of Porphyrin-containing Polymer-wrapped Single-walled Carbon Nanotubes

Significant advances in understanding the fundamental photophysical behavior of single-walled carbon nanotubes (SWNTs) have been made possible by the development of ionic, conjugated aryleneethynylene polymers that helically wrap SWNTs with well-defined morphology. My contribution to this work was the design and synthesis of porphyrin-containing polymers and the photophysical investigation of the corresponding polymer-wrapped SWNTs. For these new constructs, the polymer acts as more than just a solubilization scaffold; such assemblies can provide benchmark data for evaluating spectroscopic signatures of energy and charge transfer events and lay the groundwork for further, rational development of polymers with precisely tuned redox properties and electronic coupling with the underlying SWNT. The first design to incorporate a zinc porphyrin into the polymer backbone, PNES-PZn, suffered from severe aggregation in solution and was redesigned to produce the porphyrin-containing polymer S-PBN-PZn. This polymer was utilized to helically wrap chirality-enriched (6,5) SWNTs, which resulted in significant quenching of the porphyrin-based fluorescence. Time-resolved spectroscopy revealed a simultaneous rise and decay of the porphyrin radical cation and SWNT electron polaron spectroscopic signatures indicative of photoinduced electron transfer. A new polymer, S-PBN(b)-Ph2PZn3, was then synthesized which incorporated a meso-ethyne linked zinc porphyrin trimer. By changing the absorption profile and electrochemical redox potentials of the polymer, the photophysical behavior of the corresponding polymer-wrapped (6,5)-SWNTs was dramatically changed, and the polymer-wrapped SWNTs no longer showed evidence for photoinduced electron transfer.

Small-scale Fisheries and the Global Economy: Understanding Common-pool Resource Governance in the Context of Market Pressures, Neoliberal Policies, and Transnational Institutions

The purpose of this dissertation is to contribute to a better understanding of how global seafood trade interacts with the governance of small-scale fisheries (SSFs). As global seafood trade expands, SSFs have the potential to experience significant economic, social, and political benefits from participation in export markets. At the same time, market connections that place increasing pressures on resources pose risks to both the ecological and social integrity of SSFs. This dissertation seeks to explore the factors that mediate between the potential benefits and risks of global seafood markets for SSFs, with the goal of developing hypotheses regarding these relationships.

The empirical investigation consists of a series of case studies from the Yucatan Peninsula, Mexico. This is a particularly rich context in which to study global market connections with SSFs because the SSFs in this region engage in a variety of market-oriented harvests, most notably for octopus, groupers and snappers, lobster, and sea cucumber. Variation in market forms and the institutional diversity of local-level governance arrangements allows the dissertation to explore a number of examples.

The analysis is guided primarily by common-pool resource (CPR) theory because of the insights it provides regarding the conditions that facilitate collective action and the factors that promote long-lasting resource governance arrangements. Theory from institutional economics and political ecology contribute to the elaboration of a multi-faceted conceptualization of markets for CPR theory, with the aim of facilitating the identification of mechanisms through which markets and CPR governance actually interact. This dissertation conceptualizes markets as sets of institutions that structure the exchange of property rights over fisheries resources, affect the material incentives to harvest resources, and transmit ideas and values about fisheries resources and governance.

The case studies explore four different mechanisms through which markets potentially influence resource governance: 1) Markets can contribute to costly resource governance activities by offsetting costs through profits, 2) markets can undermine resource governance by generating incentives for noncompliance and lead to overharvesting resources, 3) markets can increase the costs of resource governance, for example by augmenting monitoring and enforcement burdens, and 4) markets can alter values and norms underpinning resource governance by transmitting ideas between local resource users and a variety of market actors.

Data collected using participant observation, survey, informal and structured interviews contributed to the elaboration of the following hypotheses relevant to interactions between global seafood trade and SSFs governance. 1) Roll-back neoliberalization of fisheries policies has undermined cooperatives’ ability to achieve financial success through engagement with markets and thus their potential role as key actors in resource governance (chapter two). 2) Different relations of production influence whether local governance institutions will erode or strengthen when faced with market pressures. In particular, relations of production in which fishers own their own means of production and share the collective costs of governance are more likely to strengthen resource governance while relations of production in which a single entrepreneur controls capital and access to the fishery are more likely to contribute to the erosion of resource governance institutions in the face of market pressures (chapter three). 3) By serving as a new discursive framework within which to conceive of and talk about fisheries resources, markets can influence norms and values that shape and constitute governance arrangements.

In sum, the dissertation demonstrates that global seafood trade manifests in a diversity of local forms and effects. Whether SSFs moderate risks and take advantage of benefits depends on a variety of factors, and resource users themselves have the potential to influence the outcomes of seafood market connections through local forms of collective action.

Physical Insights, Steady Aerodynamic Effects, and a Design Tool for Low-Pressure Turbine Flutter

The successful, efficient, and safe turbine design requires a thorough understanding of the underlying physical phenomena. This research investigates the physical understanding and parameters highly correlated to flutter, an aeroelastic instability prevalent among low pressure turbine (LPT) blades in both aircraft engines and power turbines. The modern way of determining whether a certain cascade of LPT blades is susceptible to flutter is through time-expensive computational fluid dynamics (CFD) codes. These codes converge to solution satisfying the Eulerian conservation equations subject to the boundary conditions of a nodal domain consisting fluid and solid wall particles. Most detailed CFD codes are accompanied by cryptic turbulence models, meticulous grid constructions, and elegant boundary condition enforcements all with one goal in mind: determine the sign (and therefore stability) of the aerodynamic damping. The main question being asked by the aeroelastician, ``is it positive or negative?'' This type of thought-process eventually gives rise to a black-box effect, leaving physical understanding behind. Therefore, the first part of this research aims to understand and reveal the physics behind LPT flutter in addition to several related topics including acoustic resonance effects. A percentage of this initial numerical investigation is completed using an influence coefficient approach to study the variation the work-per-cycle contributions of neighboring cascade blades to a reference airfoil. The second part of this research introduces new discoveries regarding the relationship between steady aerodynamic loading and negative aerodynamic damping. Using validated CFD codes as computational wind tunnels, a multitude of low-pressure turbine flutter parameters, such as reduced frequency, mode shape, and interblade phase angle, will be scrutinized across various airfoil geometries and steady operating conditions to reach new design guidelines regarding the influence of steady aerodynamic loading and LPT flutter. Many pressing topics influencing LPT flutter including shocks, their nonlinearity, and three-dimensionality are also addressed along the way. The work is concluded by introducing a useful preliminary design tool that can estimate within seconds the entire aerodynamic damping versus nodal diameter curve for a given three-dimensional cascade.

The Didache and Traditioned Innovation: Shaping Christian Community in the First Century and the Twenty-First Century

Church leaders, both lay and clergy, shape Christian community. Among their central tasks are: building communal identity, nurturing Christian practices, and developing faithful structures. When it comes to understanding the approach of the earliest Christian communities to these tasks, the Didache might well be the most important text most twenty-first century church leaders have never read. The Didache innovated on tradition, shaping the second generation of Christians to meet the crises and challenges of a changing world.

Most likely composed in the second half of the first century, the Didache served as a training manual for gentile converts to Christianity, preparing them for life in Christian community. This brief document, roughly one third the length of Mark’s gospel, developed within early Jewish-Christian communities. It soon found wide usage throughout the Mediterranean region, and its influence endured throughout the patristic and into the medieval period.

The Didache outlines emerging Christian practices that were rooted in both Jewish tradition and early Jesus material, yet were reaching forward in innovative ways. The Didache adopts historical teachings and practices and then adapts them for an evolving context. In this respect, the writers of the Didache, as well as the community shaped by its message, exemplify the pattern of thinking described by Greg Jones as “traditioned innovation.”

The Didache invites reflection on the shape and content of Christian community and Christian leadership in the twenty-first century. As churches and church leaders engage a rapidly changing world, the Didache is an unlikely and yet important conversation partner from two millennia ago. A quick read through its pages – a task accomplished in less than half an hour – brings the reader face to face with a brand of Christianity both very familiar and strikingly dissimilar to modern Christianity. Such dissonance challenges current assumptions about the church and creates a space in which to re-imagine our situation in light of this ancient Christian tradition. The Didache provides a window through which we might re-examine current conceptualizations of Christian life, liturgy, and leadership.

This thesis begins with an exploration of the form and function of the Didache and an examination of a number of important background issues for the informed study of the Didache. The central chapters of this thesis exegete and explore select passages in each of the three primary sections of the Didache – the Two Ways (Didache 1-6), the liturgical section (Didache 7-10), and the church order (Didache 11-15). In each instance, the composers of the Didache reach back into a cherished and life-giving aspect of the community’s heritage and shape it anew into a fresh and faithful approach to living the Christian life in a drastically different context.

The thesis concludes with three suggestions of how the Didache may provide a resource for the way the Church in the present thinks about training disciples, shaping community, and developing leadership structures. These conversation starters offer beginning points for a richer, fuller discussion of traditioned innovation in our current church context. The Didache provides a source of wisdom from our spiritual forebears that modern Christian leaders would do well not to ignore. With a look through the first century window of the Didache, twenty-first century Christians can discover fresh insights for shaping Christian community in the present.

MOVPE growth and characterization of Al(Ga)N and InAlN/AlGaN quantum wells for UV LED applications

The study of III-nitride materials (InN, GaN and AlN) gained huge research momentum after breakthroughs in the production light emitting diodes (LEDs) and laser diodes (LDs) over the past two decades. Last year, the Nobel Prize in Physics was awarded jointly to Isamu Akasaki, Hiroshi Amano and Shuji Nakamura for inventing a new energy efficient and environmental friendly light source: blue light-emitting diode (LED) from III-nitride semiconductors in the early 1990s. Nowadays, III-nitride materials not only play an increasingly important role in the lighting technology, but also become prospective candidates in other areas, for example, the high frequency (RF) high electron mobility transistor (HEMT) and photovoltaics. These devices require the growth of high quality III-nitride films, which can be prepared using metal organic vapour phase epitaxy (MOVPE). The main aim of my thesis is to study and develop the growth of III-nitride films, including AlN, u-AlGaN, Si-doped AlGaN, and InAlN, serving as sample wafers for fabrication of ultraviolet (UV) LEDs, in order to replace the conventional bulky, expensive and environmentally harmful mercury lamp as new UV light sources. For application to UV LEDs, reducing the threading dislocation density (TDD) in AlN epilayers on sapphire substrates is a key parameter for achieving high-efficiency AlGaNbased UV emitters. In Chapter 4, after careful and systematic optimisation， a working set of conditions, the screw and edge type dislocation density in the AlN were reduced to around 2.2×108 cm-2 and 1.3×109 cm-2 , respectively, using an optimized three-step process, as estimated by TEM. An atomically smooth surface with an RMS roughness of around 0.3 nm achieved over 5×5 µm 2 AFM scale. Furthermore, the motion of the steps in a one dimension model has been proposed to describe surface morphology evolution, especially the step bunching feature found under non-optimal conditions. In Chapter 5, control of alloy composition and the maintenance of compositional uniformity across a growing epilayer surface were demonstrated for the development of u-AlGaN epilayers. Optimized conditions (i.e. a high growth temperature of 1245 °C) produced uniform and smooth film with a low RMS roughness of around 2 nm achieved in 20×20 µm 2 AFM scan. The dopant that is most commonly used to obtain n-type conductivity in AlxGa1-xN is Si. However, the incorporation of Si has been found to increase the strain relaxation and promote unintentional incorporation of other impurities (O and C) during Si-doped AlGaN growth. In Chapter 6, reducing edge-type TDs is observed to be an effective appoach to improve the electric and optical properties of Si-doped AlGaN epilayers. In addition, the maximum electron concentration of 1.3×1019 cm-3 and 6.4×1018 cm-3 were achieved in Si-doped Al0.48Ga0.52N and Al0.6Ga0.4N epilayers as measured using Hall effect. Finally, in Chapter 7, studies on the growth of InAlN/AlGaN multiple quantum well (MQW) structures were performed, and exposing InAlN QW to a higher temperature during the ramp to the growth temperature of AlGaN barrier (around 1100 °C) will suffer a significant indium (In) desorption. To overcome this issue, quasi-two-tempeature (Q2T) technique was applied to protect InAlN QW. After optimization, an intense UV emission from MQWs has been observed in the UV spectral range from 320 to 350 nm measured by room temperature photoluminescence.

On-body characterization of planar differential antennas for multiple, wide, and narrow bands

This paper reports the results of the on-body experimental tests of a set of four planar differential antennas, originated by design variations of radiating elements with the same shape and characterized by the potential for covering wide and narrow bands. All the antenna designs have been implemented on low-cost FR4 substrate and characterized experimentally through on-body measurements. The results show the impact of the proximity to the human body on antenna performance and the opportunities in terms of potential coverage of wide and narrow bands for future ad hoc designs and implementations through wearable substrates targeting on-body and off-body communication and sensing applications.

Engineering metallic nanoparticles for enhancing and probing catalytic reactions

Recent developments in tailoring the structural and chemical properties of colloidal metal nanoparticles (NPs) have led to significant enhancements in catalyst performance. Controllable colloidal synthesis has also allowed tailor-made NPs to serve as mechanistic probes for catalytic processes. The innovative use of colloidal NPs to gain fundamental insights into catalytic function will be highlighted across a variety of catalytic and electrocatalytic applications. The engineering of future heterogenous catalysts is also moving beyond size, shape and composition considerations. Advancements in understanding structure-property relationships have enabled incorporation of complex features such as tuning surface strain to influence the behavior of catalytic NPs. Exploiting plasmonic properties and altering colloidal surface chemistry through functionalization are also emerging as important areas for rational design of catalytic NPs. This news article will highlight the key developments and challenges to the future design of catalytic NPs.

Critical bed shear stress and threshold of motion of maërl biogenic gravel

Critical bed shear stress for incipient motion has been determined for biogenic free-living coralline algae known as maërl. Maërl from three different sedimentary environments (beach, intertidal, and open marine) in Galway Bay, west of Ireland have been analysed in a rotating annular flume and linear flume. Velocity profile measurements of the benthic boundary layer, using an Acoustic Doppler Velocimeter, have been obtained in four different velocity experiments. The bed shear stress has been determined using three methods: Law of the Wall, Turbulent Kinetic Energy and Reynolds Stress. The critical Shields parameter has been estimated as a non-dimensional mobility number and the results have been compared with the Shields curve for natural sand. Maërl particles fall below this curve because its greater angularity allows grains to be mobilised easier than hydraulically equivalent particles. From previous work, the relationship between grain shape and the settling velocity of maërl suggests that the roughness is greatest for intertidal maërl particles. During critical shear stress determinations, beds of such rough particles exhibited the greatest critical shear stress probably because the particle thalli interlocked and resisted entrainment. The Turbulent Kinetic Energy methodology gives the most consistent results, agreeing with previous comparative studies. Rarely-documented maërl megaripples were observed in the rotating annular flume and are hypothesised to form at velocities ~10 cm s-1 higher than the critical threshold velocity, where tidal currents, oscillatory flow or combined-wave current interaction results in the preferential transport of maërl. A determination of the critical bed shear stress of maërl allows its mobility and rate of erosion and deposition to be evaluated spatially in subsequent applications to biological conservation management.