A simple procedure for the preparation of laponite and thermoplastic starch nanocomposites: Structural, mechanical, and thermal characterizations

The aim of this article is to propose advances for the preparation of hybrid nanocomposites prepared by the combination of intercalation from solution and melt-processing methods. This research investigates the effect of the laponite RDS content on the thermal, structural, and mechanical properties of thermoplastic starch (TPS). X-ray diffraction was performed to investigate the dispersion of the laponite RDS layers into the TPS matrix. The results show good nanodispersion, intercalation, and exfoliation of the clay platelets, indicating that these composites are true nanocomposites. The presence of laponite RDS also improves the thermal stability and mechanical properties of the TPSmatrix due to its reinforcement effect which was optimized by the high degree of exfoliation of the clay. Thus, these results indicate that the exfoliated TPS-laponite nanocomposites have great potential for industrial applications and, more specifically, in the packaging field. © The Author(s) 2011 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Enhanced nicotine-seeking behavior following pre-exposure to repeated cocaine is accompanied by changes in BDNF in the nucleus accumbens of rats

We investigated the behavioral and molecular interactions between cocaine and nicotine, through evaluating locomotor activity, nicotine intravenous self-administration and gene expression. Locomotor sensitization was induced in male Wistar rats by repeated cocaine (20 mg/kg; i.p.) or saline injections once a day over 7 days. Three days after the last injection, rats were challenged with either saline or cocaine (15 mg/kg; i.p.) and the locomotor activity was measured. The very next day animals received either saline or nicotine (0.4 mg/kg; s.c.) and the locomotor cross-sensitization was tested. Animals were then prepared with intrajugular catheters for nicotine self-administration. Nicotine self-administration patterns were evaluated using fixed or progressive ratio schedules of reinforcement and a 24-h unlimited access binge. Immediately after the binge sessions animals were decapitated, the brains were removed and the nucleus accumbens was dissected. The dynorphin (DYN), μ-opioid receptor (mu opioid), neuropeptide Y (NPY), brain-derived neurotrophic factor (BDNF), tropomyosin-related tyrosine kinase B receptor (TrkB) and corticotropin- releasing factor receptor type 1 (CRF-R1) gene expression were measured by the reverse transcription-polymerase chain reaction (RT-PCR). Pretreatment with cocaine caused sensitization of cocaine motor response and locomotor cross-sensitization with nicotine. In the self-administration experiments repeated cocaine administration caused an increase in the nicotine break point and nicotine intake during a 24 h binge session. © 2013 Elsevier Inc.

Mesh cancer: long-term mesh infection leading to squamous-cell carcinoma of the abdominal wall

Purpose: It is recognized that chronic inflammation can cause cancer. Even though most of the available synthetic meshes are considered non-carcinogenic, the inflammatory response to an infected mesh plays a constant aggression to the skin. Chronic mesh infection is frequently the result of misuse of mesh, and due to the challenging nature of this condition, patients usually suffer for years until the infected mesh is removed by surgical excision. Methods: We report two cases of squamous-cell carcinoma (SCC) of the abdominal wall, arising in patients with long-term mesh infection. Results: In both patients, the degeneration of mesh infection into SCC was presumably caused by the long-term inflammation secondary to infection. Patients presented with advanced SCC behaving just like the Marjolin's ulcers of burns. Radical surgical excision was the treatment of choice. The involvement of the bowel played an additional challenge in case 1, but it was possible to resect the tumor and the involved bowel and reconstruct the abdominal wall using polypropylene mesh as onlay reinforcement, in a single stage operation. He is now under adjuvant chemotherapy. The big gap in the midline after tumor resection in case 2 required mesh bridging to close the defect. The poor prognosis of case 2 who died months after the operation, and the involvement of the armpit, groin and mesenteric nodes in case 1 shows how aggressive this disease can be. Conclusion: Infected mesh must be treated early, by complete excision of the mesh. Long-standing mesh infection can degenerate into aggressive squamous-cell carcinoma of the skin. © 2013 Springer-Verlag France.

A finite element approach for predicting the ultimate rotation capacity of RC beams

This paper presents a numerical approach to model the complex failure mechanisms that define the ultimate rotational capacity of reinforced concrete beams. The behavior in tension and compression is described by a constitutive damage model derived from a combination of two specific damage models [1]. The nonlinear behavior of the compressed region is treated by the compressive damage model based on the Drucker-Prager criterion written in terms of the effective stresses. The tensile damage model employs a failure criterion based on the strain energy associated with the positive part the effective stress tensor. This model is used to describe the behavior of very thin bands of strain localization, which are embedded in finite elements to represent multiple cracks that occur in the tensioned region [2]. The softening law establishes dissipation energy compatible with the fracture energy of the concrete. The reinforcing steel bars are modeled by truss elements with elastic-perfect plastic behavior. It is shown that the resulting approach is able to predict the different stages of the collapse mechanism of beams with distinct sizes and reinforcement ratios. The tensile damage model and the finite element embedded crack approach are able to describe the stiffness reduction due to concrete cracking in the tensile zone. The truss elements are able to reproduce the effects of steel yielding and, finally, the compressive damage model is able to describe the non-linear behavior of the compressive zone until the complete collapse of the beam due to crushing of concrete. The proposed approach is able to predict well the plastic rotation capacity of tested beams [3], including size-scale effects.

Corrosion and tribocorrosion behaviour of Al-Si-Cu-Mg alloy and its composites reinforced with B4C particles in 0.05M NaCl solution

The corrosion behaviour of metal matrix composites (MMCs) is strictly linked with the presence of heterogeneities such as reinforcement phase, microcrevices, porosity, secondary phase precipitates, and interaction products. Most of the literature related to corrosion behaviour of aluminium matrix composites (AMCs) is focused on SiC reinforced AMCs. On the other hand, there is very limited information available in the literature related to the tribocorrosion behaviour of AMCs. Therefore, the present work aims to investigate corrosion and tribocorrosion behaviour of Al-Si-Cu-Mg alloy matrix composites reinforced with B4C particulates. Corrosion behaviour of 15 and 19% (vol) B4C reinforced Al-Si-Cu-Mg matrix composites and the base alloy was investigated in 0.05M NaCl solution by performing immersion tests and potentiodynamic polarisation tests. Tribocorrosion behaviour of Al-Si-Cu-Mg alloy and its composites were also investigated in 0.05M NaCl solution. The tests were carried out against alumina ball using a reciprocating ball-on-plate tribometer. Electrochemical measurements were performed before, during, and after the sliding tests together with the recording of the tangential force. Results suggest that particle addition did not affect significantly the tendency of corrosion of Al-Si-Cu-Mg alloy without mechanical interactions. During the tribocorrosion tests, the counter material was found to slide mainly on the B4C particles, which protected the matrix alloy from severe wear damage. Furthermore, the wear debris were accumulated on the worn surfaces and entrapped between the reinforcing particles. Therefore, the tendency of corrosion and the corrosion rate decreased in Al-Si-Cu-Mg matrix B4C reinforced composites during the sliding in 0.05M NaCl solution. © 2013 Elsevier B.V.

O treinamento como processo de investigação do ator-criador

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Saberes profissionais do professor de matemática: focalizando o professor e a álgebra no ensino fundamental

Pós-graduação em Educação - FCT

Estado do conhecimento: recuperação da aprendizagem e do reforço escolar na rede estadual paulista (1999 a 2009)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A prática de uma professora bem sucedida: uma leitura comportamental

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização dos alunos do ensino fundamental municipal de Araraquara encaminhados ao programa de educação especial identificados com necessidades educacionais especiais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Obtenção de nanofibras de curauá e aplicação como reforço em compósitos baseados em PVA

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propriedades físico-químicas e mecânicas de biofilmes elaborados a partir de fibra e pó de colágeno

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Estudo de tolerância ao dano no compósito processado via RTM de fibra de carbono NCF/resina epóxi CYCOM 890

Pós-graduação em Engenharia Mecânica - FEG

A solidariedade e a cooperação como estratégias para um trabalho eficaz no ambiente escolar

Pós-graduação em Educação Matemática - IGCE

Consciência e atividade: um estudo sobre (e para) a infância

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)