958 resultados para propagation of analytic singularities
Resumo:
This work was carried out with Psychotria ipecacuanha, a Brazilian medicinal plant the roots of which contain emetine. The main objective was to develop a protocol for the micro-propagation of these species, by testing different culture techniques, the temporary immersion system, and the semi-solid and liquid media systems. In the semi-solid system, experiments were developed in flasks of two different sizes containing MS, B5, and WP media to which were added different growth regulators. Innoculum density was also evaluated. The liquid medium system consisted of MS medium supplemented with different growth regulators. For the temporary immersion system, the MS medium received an addition of 1.5mg/L BAP and 0.5mg/L GA3, and a reverse digital apparatus and vacuum pump were used. The liquid medium system with MS medium supplemented with 1.5mg/L BAP and 0.5mg/L GA3 presented the best results for shoot proliferation in a period of 30 days in culture (2.37 ± 0.32 shoots/explant). Cultures carried out for 90 days in the semi-solid system, using 8.5 × 5.5cm flasks and 3 explants per flask, developed 1.80 ± 0.20 shoots/explant, achieving 3.06 ± 0.51 cm of height adn presented superior survival ratio (96%). Explants cultured in temporary immersion system for 90 days showed 2.30 ± 1.10 shoots/explant achieving a growth of 2.08 ± 0.12 cm and 52% survival.
Resumo:
The yacon (Polymnia sonchifolia) is used largely for the high fructan content of its tubers; consequently, it is a good alternative for diabetics. One of the more important restricting factors of the commercial production of yacon is its susceptibility to nematode attack. This, as well as germplasm bank maintenance, justifies the importance of in vitro propagation of this species. In this way, our work aimed to verify the best asepsis method for yacon for the in vitro establishment from the rhizophore and the axillary buds of the aerial parts, and the effect of benzylaminopurine (BAP) addition to the culture medium. The number of contaminated cultures, the occurrence of phenolic oxidation and the occurrence of a vitreous aspect, showed differences with bud source, immersion time for asepsis, and BAP use. The results contribute to establishing a yacon micro propagation procedure.
Resumo:
Micropropagation of Calendula officinalis L. is usually propagated through seeds and therefore shows high diversity in flower size and colour, what causes quantitative and qualitative chemical variability. A micropropagation protocol was established for clonal propagation of this species to achieve homogeneous biomass, more appropriate for the production of phytotherapics. Explants harvested from capitula were the most appropriate for the micropropagation process. MS culture medium supplemented with 1.0 mgL-1 BAP and 6.0 gL-1 Phytagel™ enhanced shoot proliferation, while MS medium supplemented with 0.5 mgL-1 Kinetin and 6.0 gL-1 Phytagel™, increased shoot elongation. Plantlets (80%) cultured in MS/2 medium supplemented with 1.0 mgL-1 de IBA rooted.
Resumo:
In this paper, we consider the propagation of water waves in a long-wave asymptotic regime, when the bottom topography is periodic on a short length scale. We perform a multiscale asymptotic analysis of the full potential theory model and of a family of reduced Boussinesq systems parametrized by a free parameter that is the depth at which the velocity is evaluated. We obtain explicit expressions for the coefficients of the resulting effective Korteweg-de Vries (KdV) equations. We show that it is possible to choose the free parameter of the reduced model so as to match the KdV limits of the full and reduced models. Hence the reduced model is optimal regarding the embedded linear weakly dispersive and weakly nonlinear characteristics of the underlying physical problem, which has a microstructure. We also discuss the impact of the rough bottom on the effective wave propagation. In particular, nonlinearity is enhanced and we can distinguish two regimes depending on the period of the bottom where the dispersion is either enhanced or reduced compared to the flat bottom case. © 2007 The American Physical Society.
Resumo:
The adventitious rooting process of in vitro cultured plantlets is a technique that has been employed for the vegetative propagation of a significant number of native and exotic species. Many factors are associated with the rooting stage influencing positive and/or negatively the establishment of micropropagation protocols. The objective of this work was a literature review of the main inherent factors concerning in vitro rooting process including the correlation among others the endogenous and exogenous auxins levels, juvenility, genotype, mineral nutrition, culture medium conditions, addition of growth regulators and other substances as phenolic compounds and active coal besides growth environmental conditions of in vitro cultures. Although the complete elucidation of all processes involved with rooting of in vitro cultured plants has not been achieved so far, a comprehensive study of the main factors that interfere on rooting is fundamental for the establishment of new researches that might contribute for the rooting of economically important plants.
Resumo:
Includes bibliography
Resumo:
The numerical model FUNWAVE+Ship simulates the generation and propagation of ship waves to shore, including phenomena such as refraction, diffraction, currents and breaking of waves. The interaction of two wave trains, generated by ships moving either in the same direction at different speeds or in opposite directions, is studied. Focus is given to the wave orbital velocities and to the free surface pattern.
Resumo:
This study aimed to assess the asexual propagation of Psychotria viridis by leaf cuttings. The treatments were: A - Whole leaf cuttings, B - leaf cuttings with the top third cut off; C - with the lower third of the cuttings removed; D - with cuts on the primary vein of leaf cuttings, and E - poles with cuts on the leaf's secondary veins. The cuttings were immersed in distilled water for a period of 70 days. In all the treatments, the rooting was observed to occur in the region of the cut, or the place where the incision in the vein was. Current assay shows the feasibilities of Psychotria viridis leaf stalks and concludes that cuttings at the nerve ends highlight rooting in so far as the leaf stalks remain in permanent contact with the plant.
Resumo:
Municipal Plans of Risk Reducing (PMRR's) were produced in settlements in the municipalities of Itapecerica da Serra (SP) and Suzano (SP), covering areas at risk of landslides and washouts of banks of streams. The development of PMRR's provided the delimitation of areas of risk, the indication of intervention works in order to eliminate and / or reduce risks, and consequently an indication of the areas and priority sectors for implementation of intervention works. The prioritization of areas and sectors that should receive the works of reducing or eliminating risk was performed by an expert involved in risk mapping. Despite the specialist's judgment exercise caution, the decision regarding the priority sites for implementation of alternative interventions is subjective. Since there is no way to eliminate this subjectivity, the use of decision-making techniques is important to evaluate whether the expert's reasoning is consistent. One of the first techniques developed for multiple criteria is the AHP (Analytic Hierarchy Process). This paper describes the results of a research carried out in order to assess whether the use of Analytic Hierarchy Process contributes to the results of the indication of the areas and priority sectors for implementation of interventions can be considered more consistent than in situations where the priority occurs without the use of decision making techniques. Results were compared between the prioritization of interventions for implementation contained in PMRR's of Itapecerica da Serra and Suzano and those obtained from the use of Analytic Hierarchy Process (AHP). It was concluded that such techniques permits an evaluation of the expert's judgment is logically coherent, thus contributing to produce results more technically based.
Resumo:
The propagation of 'juçara' and 'açaí' is done by seeds, but there is a great desuniformity in the germination process. In this way, the objective of this study was to verify the effect of temperature, mechanical scarification and substrate on seed germination of both species. Two experiments were conducted in a completely randomized design, with four replications each consisting of 25 seeds. The first was conducted with 14 treatments in factorial scheme 7 x 2, seven temperatures (20, 25, 30, 35, 20-30 and 25-35 °C and natural condition), with and without mechanical scarification. The second was constituted of eight treatments in factorial scheme 4 x 2, four substrates (sand, vermiculite, coconut fiber and soil + manure), with and without mechanical scarification. Seeds of 'juçara' palm present the highest mean percentage and germination speed index in alternating temperatures of 20-30 and 25-35 °C and natural condition and in substrates sand, vermiculite and coconut fiber. Temperatures of 30, 35, 20-30 and 25-35 °C and natural condition in all substrates tested were the most favorable condition for 'açai' seeds. The scarification of the seeds was favorable to the germination process of 'juçara' whereas the seeds of açaí does not need to be scarified.
Resumo:
The aim of this study was to evaluate the in vitro growth of Cattleya loddigesii in alternative agents to agar with starch and physical matrix with acclimatization of regenerated plants. Protocorms with 90 days after sowing (0.5 cm of length) were subcultured in 1/2 MS culture medium among the treatments consisting of: agar 7 g L-1 (T1, which corresponds the control), agar 3,5 g L-1 with cassava starch 30 g L-1 (T2), cassava starch 60 g L-1 (T3), cotton fiber (T4) and chopped polyurethane foam (T5). Plantlets were retained in these treatments for over 150 days, and at the end of in vitro culture, were analyzed by their biometric data and acclimatized in a greenhouse during 120 days and evaluated the survival and relative growth rate (RGR). The substrate comprising of chopped polyurethane foam (T5) showed greater efficiency for growth in vitro and also increased survival rate, while substrate cassava starch (T3) provided delay for plantlet growth. Therefore, chopped polyurethane foam is recommended because of low cost and suitable characteristics for the propagation of Cattleya loddigesii.
Resumo:
In this work we propose a new image inpainting technique that combines texture synthesis, anisotropic diffusion, transport equation and a new sampling mechanism designed to alleviate the computational burden of the inpainting process. Given an image to be inpainted, anisotropic diffusion is initially applied to generate a cartoon image. A block-based inpainting approach is then applied so that to combine the cartoon image and a measure based on transport equation that dictates the priority on which pixels are filled. A sampling region is then defined dynamically so as to hold the propagation of the edges towards image structures while avoiding unnecessary searches during the completion process. Finally, a cartoon-based metric is computed to measure likeness between target and candidate blocks. Experimental results and comparisons against existing techniques attest the good performance and flexibility of our technique when dealing with real and synthetic images. © 2013 Elsevier B.V. All rights reserved.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Ciências Sociais - FFC