Vocational and occupational counsseling: a strategy of preventive intervention directed to Young men and women from the interior of the province of Buenos Aires

This work belongs to one of the activities that are carried out in the Vocational and Occupational Guidance Center (V.O.G.C.) of the Faculty of Humanities and Educational Sciences at the L.P.N.U. In the year 1994 the Vocational/Occupational Guidance Programme for Municipalities was created, destined for work with adolescents who are attending their last year at secondary schools in the interior of the Province of Buenos Aires . The Programme aims at fostering the development of spaces for reflection related to the educational/working projects of the adolescents who are close to entering university. The proposal is based on the methodology of work groups, in the journeys preoccupations are sheared, the worries and fears experienced by the students are shared with their hosts, possibilities are used as ground for construction, dealing both with aspects of their current situation and their future possibilities. From the analysis of the group productions collected throughout these years, we have developed a student's profile that - although it resembles the one obtained from local adolescents- adds new questions and points of view, thus increasing the complexity of the balance of forces related to the question of having to make a choice.

Vocational and occupational counsseling: a strategy of preventive intervention directed to Young men and women from the interior of the province of Buenos Aires

This work belongs to one of the activities that are carried out in the Vocational and Occupational Guidance Center (V.O.G.C.) of the Faculty of Humanities and Educational Sciences at the L.P.N.U. In the year 1994 the Vocational/Occupational Guidance Programme for Municipalities was created, destined for work with adolescents who are attending their last year at secondary schools in the interior of the Province of Buenos Aires . The Programme aims at fostering the development of spaces for reflection related to the educational/working projects of the adolescents who are close to entering university. The proposal is based on the methodology of work groups, in the journeys preoccupations are sheared, the worries and fears experienced by the students are shared with their hosts, possibilities are used as ground for construction, dealing both with aspects of their current situation and their future possibilities. From the analysis of the group productions collected throughout these years, we have developed a student's profile that - although it resembles the one obtained from local adolescents- adds new questions and points of view, thus increasing the complexity of the balance of forces related to the question of having to make a choice.

A sea urchin Na+K+2Cl- cotransporter is involved in the maintenance of calcification-relevant cytoplasmic cords in Strongylocentrotus droebachiensis larvae

The cellular mechanisms of calcification in sea urchin larvae are still not well understood. Primary mesenchyme cells within the larval body cavity form a syncytium to secrete CaCO3 spicules from intracellular amorphous CaCO3 (ACC) stores. We studied the role of Na+K+2Cl- cotransporter (NKCC) in intracellular ACC accumulation and larval spicule formation of Strongylocentrotus droebachiensis. First, we incubated growing larvae with three different loop diuretics (azosemide, bumetanide, and furosemide) and established concentration-response curves. All loop diuretics were able to inhibit calcification already at concentrations that specifically inhibit NKCC. Calcification was most effectively inhibited by azosemide (IC50 = 6.5 µM), while larval mortality and swimming ability were not negatively impacted by the treatment. The inhibition by bumetanide (IC50 = 26.4 µM) and furosemide (IC50 = 315.4 µM) resembled the pharmacological fingerprint of the mammalian NKCC1 isoform. We further examined the effect of azosemide on the maintenance of cytoplasmic cords and on the occurrence of calcification vesicles using fluorescent dyes (calcein, FM1-43). Fifty micromolars of azosemide inhibited the maintenance of cytoplasmic cords and resulted in increased calcein fluorescence within calcification vesicles. The expression of NKCC in S. droebachiensis was verified by PCR and Western blot with a specific NKCC antibody. In summary, the pharmacological profile of loop diuretics and their specific effects on calcification in sea urchin larvae suggest that they act by inhibition of NKCC via repression of cytoplasmic cord formation and maintenance.

A Retrospective View of Software Maintenance and Reengineering Research.

As a summary of past, current, and future trends in software maintenance and reengineering research, we give in this editorial a retrospective look from the past 14 years to now. We provide insight on how software maintenance has evolved and on the most important research topics presented in the series of the European Conference on Software Maintenance and Reengineering.

Design Patterns in Software Maintenance: An Experiment Replication at UPM - Experiences with the RESER'11 Joint Replication Project

Replication of software engineering experiments is crucial for dealing with validity threats to experiments in this area. Even though the empirical software engineering community is aware of the importance of replication, the replication rate is still very low. The RESER'11 Joint Replication Project aims to tackle this problem by simultaneously running a series of several replications of the same experiment. In this article, we report the results of the replication run at the Universidad Politécnica de Madrid. Our results are inconsistent with the original experiment. However, we have identified possible causes for them. We also discuss our experiences (in terms of pros and cons) during the replication.

The value of cultural assets. Maintenance Costs and economic sustainability at heritage

Under the 12th International Conference on Building Materials and Components is inserted this communication related to the field of management of those assets that constitute the Spanish Cultural Heritage and maintenance. This work is related to the field of management of those assets that constitute the Spanish Cultural Heritage which share an artistic or historical background. The conservation and maintenance become a social demand necessary for the preservation of public values, requiring the investment of necessary resources. The legal protection involves a number of obligations and rights to ensure the conservation and heritage protection. The duty of maintenance and upkeep exceeds the useful life the property that must endure more for their cultural value for its usability. The establishment of the necessary conditions to prevent deterioration and precise in order to fulfill its social function, seeking to prolong the life of the asset, preserving their physical integrity and its ability to convey the values protected. This obligation implies a substantial financial effort to the holder of the property, either public or private entity, addressing a problem of economic sustainability. Economic exploitation, with the aim of contributing to their well-maintained, is sometimes the best way to get resources. The work will include different lines of research with the following objectives. - Establishment of processes for assessing total costs over the building life cycle (LCC), during the planning stages or maintenance budgets to determine the most advantageous operating system. - Relationship between the value of property and maintenance costs, and establishing a sensitivity analysis.

Application of virtual certification techniques to vehicle design and track maintenance

Virtual certification partially substitutes by computer simulations the experimental techniques required for rail vehicle certification. In this paper, several works were these techniques were used in the vehicle design and track maintenance processes are presented. Dynamic simulation of multibody systems was used to virtually apply the EN14363 standard to certify the dynamic behaviour of vehicles. The works described are: assessment of a freight bogie design adapted to meter-gauge, assessment of a railway track layout for a subway network, freight bogie design with higher speed and axle load, and processing of the data acquired by a track recording vehicle for track maintenance.

Identification of pressures and maintenance in railway tunnels

This paper describes an interactive set of tools used to determine the safety of tunnels and to provide data for the decision making of its mainteinance. Although, no doubt, there are still several drawbacks in the difficult procedures in use it is clear that the way is promising and future improvements both in experimental and analytical methods will increase our understanding of this matter.

Maintenance management model for industrial Smes

This paper presents the design and results of the implementation of a model for the evaluation and improvement of maintenance management in industrial SMEs. A thorough review of the state of the art on maintenance management was conducted to determine the model variables; to characterize industrial SMEs, a questionnaire was developed with Likert variables collected in the previous step. Once validated the questionnaire, we applied the same to a group of seventy-five (75) SMEs in the industrial sector, located in Bolivar State, Venezuela. To identify the most relevant variables maintenance management, we used exploratory factor analysis technique applied to the data collected. The score obtained for all the companies evaluated (57% compliance), highlights the weakness of maintenance management in industrial SMEs, particularly in the areas of planning and continuous improvement; most SMEs are evaluated in corrective maintenance stage, and its performance standard only response to the occurrence of faults.

Safety and health in forest harvesting operations. Diagnosis and preventive actions. A review

Aim of study: to review the present state of the art in relation to the main labour risks and the most relevant results of recent studies evaluating the safety and health conditions of the forest harvesting work and better ways to reduce accidents. Area of study: It focuses mainly on developed Countries, where the general concern about work risks prevention, together with the complex idiosyncrasy of forest work in forest harvesting operations, has led to a growing interest from the forest scientific and technical community. Material and Methods: The main bibliographic and Internet references have been identified using common reference analysis tools. Their conclusions and recommendations have been comprehensively summarized. Main results: Collection of the principal references and their most important conclusions relating to the main accident risk factors, their causes and consequences, the means used towards their prevention, both instrumental as well as in the aspects of training and business management, besides the influence of the growing mechanization of logging operations on those risks. Research highlights: Accident risk is higher in forest harvesting than in most other work sectors, and the main risk factors such as experience, age, seasonality, training, protective equipment, mechanization degree, etc. have been identified and studied. The paper summarizes some relevant results, one of the principal being that the proper entrepreneurial risk management is a key factor leading to the success in minimizing labour risks..

Using Electronic Documents for Knowledge Acquisition and Model Maintenance

Knowledge acquisition and model maintenance are key problems in knowledge engineering to improve the productivity in the development of intelligent systems. Although historically a number of technical solutions have been proposed in this area, the recent experience shows that there is still an important gap between the way end-users describe their expertise and the way intelligent systems represent knowledge. In this paper we propose an original way to cope with this problem based on electronic documents. We propose the concept of intelligent document processor as a tool that allows the end-user to read/write a document explaining how an intelligent system operates in such a way that, if the user changes the content of the document, the intelligent system will react to these changes. The paper presents the structure of such a document based on knowledge categories derived from the modern knowledge modeling methodologies together with a number of requirements to be understandable by end-users and problem solvers.

Task-based telemanipulation for maintenance in large scientific facilities

This thesis presents a task-oriented approach to telemanipulation for maintenance in large scientific facilities, with specific focus on the particle accelerator facilities at European Organization for Nuclear Research (CERN) in Geneva, Switzerland and GSI Helmholtz Centre for Heavy Ion Research (GSI) in Darmstadt, Germany. It examines how telemanipulation can be used in these facilities and reviews how this differs from the representation of telemanipulation tasks within the literature. It provides methods to assess and compare telemanipulation procedures as well a test suite to compare telemanipulators themselves from a dexterity perspective. It presents a formalisation of telemanipulation procedures into a hierarchical model which can be then used as a basis to aid maintenance engineers in assessing tasks for telemanipulation, and as the basis for future research. The model introduces a new concept of Elemental Actions as the building block of telemanipulation movements and incorporates the dependent factors for procedures at a higher level of abstraction. In order to gain insight into realistic tasks performed by telemanipulation systems within both industrial and research environments a survey of teleoperation experts is presented. Analysis of the responses is performed from which it is concluded that there is a need within the robotics community for physical benchmarking tests which are geared towards evaluating the dexterity of telemanipulators for comparison of their dexterous abilities. A three stage test suite is presented which is designed to allow maintenance engineers to assess different telemanipulators for their dexterity. This incorporates general characteristics of the system, a method to compare kinematic reachability of multiple telemanipulators and physical test setups to assess dexterity from a both a qualitative perspective and measurably by using performance metrics. Finally, experimental results are provided for the application of the proposed test suite onto two telemanipulation systems, one from a research setting and the other within CERN. It describes the procedure performed and discusses comparisons between the two systems, as well as providing input from the expert operator of the CERN system.

On the harmonic analysis of cup anemometer rotation speed: A principle to monitor performance and maintenance status of rotating meteorological sensors

The calibration results of one anemometer equipped with several rotors, varying their size, were analyzed. In each case, the 30-pulses pert turn output signal of the anemometer was studied using Fourier series decomposition and correlated with the anemometer factor (i.e., the anemometer transfer function). Also, a 3-cup analytical model was correlated to the data resulting from the wind tunnel measurements. Results indicate good correlation between the post-processed output signal and the working condition of the cup anemometer. This correlation was also reflected in the results from the proposed analytical model. With the present work the possibility of remotely checking cup anemometer status, indicating the presence of anomalies and, therefore, a decrease on the wind sensor reliability is revealed.

Characterisation of the operation & maintenance phase in PV rural electrification programmes

Con 1.300 millones de personas en el mundo sin acceso a la electricidad (la mayoría en entornos rurales de países empobrecidos), la energía solar fotovoltaica constituye una solución viable técnica y económicamente para electrificar las zonas más remotas del planeta donde las redes eléctricas convencionales no llegan. Casi todos los países en el mundo han desarrollado algún tipo de programa de electrificación fotovoltaica rural durante los últimos 40 años, principalmente los países más pobres, donde a través de diferentes modelos de financiación, se han instalado millones de sistemas solares domiciliarios (pequeños sistemas fotovoltaicos para uso doméstico). Durante este largo período, se han ido superando muchas barreras, como la mejora de la calidad de los sistemas fotovoltaicos, la reducción de costes, la optimización del diseño y del dimensionado de los sistemas, la disponibilidad financiera para implantar programas de electrificación rural, etc. Gracias a esto, la electrificación rural descentralizada ha experimentado recientemente un salto de escala caracterizada por la implantación de grandes programas con miles de sistemas solares domiciliarios e integrando largos períodos de mantenimiento. Muchos de estos grandes programas se están llevando a cabo con limitado éxito, ya que generalmente parten de supuestos e hipótesis poco contrastadas con la realidad, comprometiendo así un retorno económico que permita el desarrollo de esta actividad a largo plazo. En este escenario surge un nuevo reto: el de cómo garantizar la sostenibilidad de los grandes programas de electrificación rural fotovoltaica. Se argumenta que la principal causa de esta falta de rentabilidad es el imprevisto alto coste de la fase de operación y mantenimiento. Cuestiones clave tales como la estructura de costes de operación y mantenimiento o la fiabilidad de los componentes del sistema fotovoltaico no están bien caracterizados hoy en día. Esta situación limita la capacidad de diseñar estructuras de mantenimiento capaces de asegurar la sostenibilidad y la rentabilidad del servicio de operación y mantenimiento en estos programas. Esta tesis doctoral tiene como objetivo responder a estas cuestiones. Se ha realizado varios estudios sobre la base de un gran programa de electrificación rural fotovoltaica real llevado a cabo en Marruecos con más de 13.000 sistemas solares domiciliarios instalados. Sobre la base de este programa se ha hecho una evaluación en profundidad de la fiabilidad de los sistemas solares a partir de los datos de mantenimiento recogidos durante 5 años con más de 80.000 inputs. Los resultados han permitido establecer las funciones de fiabilidad de los equipos tal y como se comportan en condiciones reales de operación, las tasas de fallos y los tiempos medios hasta el fallo para los principales componentes del sistema, siendo este el primer caso de divulgación de resultados de este tipo en el campo de la electrificación rural fotovoltaica. Los dos principales componentes del sistema solar domiciliario, la batería y el módulo fotovoltaico, han sido analizados en campo a través de una muestra de 41 sistemas trabajando en condiciones reales pertenecientes al programa solar marroquí. Por un lado se ha estudiado la degradación de la capacidad de las baterías y por otro la degradación de potencia de los módulos fotovoltaicos. En el caso de las baterías, los resultados nos han permitido caracterizar la curva de degradación en capacidad llegando a obtener una propuesta de nueva definición del umbral de vida útil de las baterías en electrificación rural. También sobre la base del programa solar de Marruecos se ha llevado a cabo un estudio de caracterización de los costes reales de operación y mantenimiento a partir de la base de datos de contabilidad del programa registrados durante 5 años. Los resultados del estudio han permitido definir cuáles son costes que más incidencia tienen en el coste global. Se han obtenido los costes unitarios por sistema instalado y se han calculado los montantes de las cuotas de mantenimiento de los usuarios para garantizar la rentabilidad de la operación y mantenimiento. Finalmente, se propone un modelo de optimización matemática para diseñar estructuras de mantenimiento basado en los resultados de los estudios anteriores. La herramienta, elaborada mediante programación lineal entera mixta, se ha aplicado al programa marroquí con el fin de validar el modelo propuesto. ABSTRACT With 1,300 million people worldwide deprived of access to electricity (mostly in rural environments), photovoltaic solar energy has proven to be a cost‐effective solution and the only hope for electrifying the most remote inhabitants of the planet, where conventional electric grids do not reach because they are unaffordable. Almost all countries in the world have had some kind of rural photovoltaic electrification programme during the past 40 years, mainly the poorer countries, where through different organizational models, millions of solar home systems (small photovoltaic systems for domestic use) have been installed. During this long period, many barriers have been overcome, such as quality enhancement, cost reduction, the optimization of designing and sizing, financial availability, etc. Thanks to this, decentralized rural electrification has recently experienced a change of scale characterized by new programmes with thousands of solar home systems and long maintenance periods. Many of these large programmes are being developed with limited success, as they have generally been based on assumptions that do not correspond to reality, compromising the economic return that allows long term activity. In this scenario a new challenge emerges, which approaches the sustainability of large programmes. It is argued that the main cause of unprofitability is the unexpected high cost of the operation and maintenance of the solar systems. In fact, the lack of a paradigm in decentralized rural services has led to many private companies to carry out decentralized electrification programmes blindly. Issues such as the operation and maintenance cost structure or the reliability of the solar home system components have still not been characterized. This situation does not allow optimized maintenance structure to be designed to assure the sustainability and profitability of the operation and maintenance service. This PhD thesis aims to respond to these needs. Several studies have been carried out based on a real and large photovoltaic rural electrification programme carried out in Morocco with more than 13,000 solar home systems. An in‐depth reliability assessment has been made from a 5‐year maintenance database with more than 80,000 maintenance inputs. The results have allowed us to establish the real reliability functions, the failure rate and the main time to failure of the main components of the system, reporting these findings for the first time in the field of rural electrification. Both in‐field experiments on the capacity degradation of batteries and power degradation of photovoltaic modules have been carried out. During the experiments both samples of batteries and modules were operating under real conditions integrated into the solar home systems of the Moroccan programme. In the case of the batteries, the results have enabled us to obtain a proposal of definition of death of batteries in rural electrification. A cost assessment of the Moroccan experience based on a 5‐year accounting database has been carried out to characterize the cost structure of the programme. The results have allowed the major costs of the photovoltaic electrification to be defined. The overall cost ratio per installed system has been calculated together with the necessary fees that users would have to pay to make the operation and maintenance affordable. Finally, a mathematical optimization model has been proposed to design maintenance structures based on the previous study results. The tool has been applied to the Moroccan programme with the aim of validating the model.

Sobre la forma de garantizar la trazabilidad metrológica en los sistemas hospitalarios

Dentro del equipamiento que existen en los hospitales, se realizan muy diversas actuaciones para el correcto funcionamiento de los equipos que se destinan, tanto a medir sobre el paciente o para tratamiento sobre estos mismos, el abanico de equipos que existen es muy grande, sin contar con los que directamente se instalan o, más correctamente, se implantan en el paciente. Los hospitales tienen establecidas pautas de mantenimiento tanto correctivo como preventivo, también de verificación relativa a seguridad y, en algunos casos, acciones que van destinadas a comprobar las magnitudes en los equipos. Esto último no es lo normal, de hecho, en muchos casos, la mayoría, se desconoce cómo poder comprobar que las magnitudes de un equipo se pueden trazar a un patrón de medida nacional. La investigación se ha desarrollado para determinar, siendo algo que esta patente hasta en la normalización ISO, que no existen para muchos equipos principios establecidos para garantizar la trazabilidad metrológica da las magnitudes físicas en las que trabaja durante su vida útil. Debido a la amplitud de este campo, el desarrollo de investigación se ha llevado en un formato piramidal, desde las necesidades para poder llegar a un estudio concreto de equipos concretos (Termómetros Clínicos, Tensiómetros, Ultrasonidos y Onda Corta). Para llegar a estos se ha realizado un estudio de cómo se encuentra la trazabilidad metrológica en todo el espectro, desde la gestión hasta llegar a casos particulares. Estudiando la gran cantidad de documentación existente y llegando a determinar el campo de trabajo en la metrología hospitalaria, clasificando los equipos y determinando como se encuentran definidos los métodos que llevan a realidad la trazabilidad metrológica, en la normalización. Un grupo no muy trabajado de los equipos electromédicos son los que se encuentran dentro de los tratamientos de Rehabilitación de traumatología, siendo equipos de uso muy habitual en los centros de salud para las lesiones musculares y óseas. A este asunto se ha dedicado un esfuerzo extra, con un reporte histórico de su origen y en qué punto se encuentran ahora. Se han estudiado dentro de estos equipos los de tratamiento de ultrasonidos, de diatermia y onda corta, que son los más representativos de los equipos destinados a electro terapia, pero hay que tener en cuenta que hay campos que se han mencionado globalmente de la rehabilitación, como son la terapia o la biomecánica, de forma similar a otras tecnologías sanitarias de otras especialidades (radiología o análisis clínico). Hay, también, dentro de la terapia, todos esos tratamientos propios de gimnasio, como son poleas, pesas, mesas de masajes, balones, etc… Que su metrología es sencilla, son equipos que existen medios de comprobación de las magnitudes que utilizan por la existencia en otras actividades de la industria (balanzas, pesas, etc). La investigación realizada ha pretendido evaluar todo el global y llegar a casos concretos para determinar cómo está la situación. Llegando a desarrollar una clasificación de equipos y de normas, que permiten vislumbrar las necesidades metrológicas y permitiría establecer una Gestión de la Trazabilidad Metrológica, concluyendo en el estudio para los equipos que se han mencionado. ABSTRACT Within the equipment that exist in the hospitals, there are very diverse performances for the correct operation of the equipment that is intended both to measure on the patient or for treatment on these same, the range of equipment available is very large, without which directly are installed or, more correctly, are implanted in the patient. The hospitals have established patterns of maintenance both corrective and preventive, also of verification of security and, in some cases, actions which are intended to check the magnitudes in the equipment. This last is not normal, in fact, in many cases, the majority, it is not known as to be able to check that the magnitudes of a computer can be traced to a pattern of national measure. The research has been developed to determine, is something that this patent up to the International Organization for Standardization (ISO), that do not exist for many teams established principles to ensure the metrological traceability gives the physical quantities in which they work during its useful life. Due to the breadth of this field, the development of research has been conducted in a pyramid format, from the needs to be able to reach a specific study of specific equipment (Clinical Thermometers, Tensiometers, Ultrasound, and Short Wave). To reach theme, has been carried out a study of how is the metrological traceability across the entire spectrum, from the management to individuals cases. Considering the large amount of existing documentation and arriving to determine the labor camp in the metrology hospital, sorting equipment and determining how are defined the methods that lead to reality the metrological traceability, in the standardization. A group not too worked for medical electrical equipment are found within the rehabilitation treatment of traumatology, being equipment of very common use in the health centers for muscle injuries and bone. In this matter has been dedicated an extra effort, with a report history of its origin and where they are now. We have studied within these teams about the treatment of ultrasound, diathermy, short wave, which are the most representative of the equipment that is destined to electro therapy, but it must be borne in mind that there are fields that have been mentioned globally of rehabilitation, as are the therapy or the biomechanics, similar to other health technologies from other specialties (radiology or clinical analysis). There is, also, within the therapy, all these treatments own gym, such as pulleys, weights, tables of massages, balls, etc… that its metrology is simple, are computers that there are means of verification of the magnitudes that used by the existence in other activities of the industry (scales, weights, etc). The research carried out has tried to assess the entire global and reach specific cases to determine the situation as it is. Arriving in the development of a classification of equipment and standards, which give us a glimpse of the metrological needs and establish a Management of the Metrological Traceability, concluding in the study for computers that have been mentioned.