Physicochemical properties and mineral and protein content of honey samples from Ceará state, Northeastern Brazil

This study evaluated the physicochemical properties and protein and mineral content of honey samples from Ceará State, Northeastern Brazil, one of the major honey exporters in the country. Nutritional importance of the minerals detected was also analyzed. Physicochemical properties were examined according to the AOAC and CAC official methods; the protein content was determined using the Bradford method, and the minerals were analyzed by atomic absorption spectrometry. All analyses were performed in triplicate. The levels of macrominerals sodium (Na), potassium (K), calcium (Ca), and magnesium (Mg) varied from 1.80-47.20, 21.30-1513.30, 14.58-304.82, and 2.48-28.33 mg/kg, respectively, and the trace elements iron (Fe), copper (Cu), manganese (Mn), zinc (Zn), selenium (Se), and chromium (Cr) varied from 0.12-8.76, 0.07-1.29, 0.06-1.96, 0.07-1.85 mg/kg, 0.36 × 10-3-62.00 × 10-3 and 22.50 × 10-3-170.33 × 10-3 µg/kg, respectively. Myracrodruon urundeuva honey sample had high contents of macrominerals (Na, K, Ca, and Mg). Protein content of the Anacardium occidentale honey sample was the highest (1121.00 µg/g) among the samples analyzed. Among the minerals detected in the honey samples, K showed the highest concentration, followed by Ca, Na, and Mg. The presence of trace elements can show environmental contamination. The honey samples studied were free of trace elements contamination, except for Mn; the Piptadenia moniliformis was the only honey sample that was in compliance with the law requirements. The variations of the chemical constituents in the honey samples are probably related to differences in the floral origin and mineral and protein contents and confirm the nutritional importance of Ceará State honey.

Proximate and mineral composition of industrialized biscuits

The aim of this study was to analyze the proximate and mineral composition of 21 types of biscuits. All biscuits showed high fat contents, significantly different (P < 0.05) from those described on the labels, except for three brands. Insoluble fiber fractions were predominant in the analyzed samples. Among the 21 biscuits analyzed, 16 showed food label values 20% higher than those allowed by law, according to RDC 360, for fat, protein, total fiber, calcium, and sodium levels. This difference reached 273% for the sodium content. The calcium content was included only on the label of three samples analyzed, and the values described were significantly lower than those obtained analytically. Considering that biscuits are consumed by people of all age groups and of different socioeconomic levels, the results can contribute to the plans for health policies, such as surveillance of nutritional labeling, ensuring the reliability of the information provided by the food industry and enabling the identification of the relationship between dietary factors and the occurrence of non-transmissible chronic diseases.

Mineral characterization of native fruits from the southern region of Brazil

Although the greatest variety of Brazilian flora is in the Amazon region, the Southern region of Brazil also has an estimated number of at least 5,000 species of vascular native plants. These species have been neglected as potential food sources, remaining unknown and under-utilized and limiting the potential variety in the diet of Brazilians and other peoples. Therefore the aim of this study was to characterize the mineral composition and content present in seven native fruit species of Southern Brazil using inductively coupled plasma optical emission spectrometry (ICP-OES). The essential element concentrations in the fruit samples were higher or similar to the values reported for traditional fruits. The araticum-do-mato fruit samples had high concentrations of the elements Ca, K, and Cu, and trace elements such as Pb and Sr. Mandacaru-de-três-quinas had predominance of Ba, Bi, and Ga, and the essential elements Mg and Mn. Uvaia and guabiroba had the highest levels of Al and Cr, but uvaia had high levels of Fe and Zn. The pindo palm had high amounts of Cd and Ni, and the yellow guava had high concentrations of Na, while red guava had high levels of Co.

Fórum nacional de discussão das diretrizes do KDIGO para o distúrbio mineral e ósseo da doença renal crônica (DMO-DRC): uma análise crítica frente à relidade Brasileira

No dia 14 de novembro de 2009, a Sociedade Brasileira de Nefrologia promoveu um fórum de discussão das novas diretrizes do KDIGO (Kidney Disease: Improving Global Outcomes). O objetivo desse encontro, onde estiveram presentes 64 participantes, foi discutir estas novas diretrizes diante da realidade brasileira. Esse encontro teve o patrocínio da Empresa de Biotecnologia Genzyme, que não teve acesso à sala de discussão e tampouco aos temas tratados durante o evento. Este artigo traz um resumo das diretrizes do KDIGO e das discussões realizadas pelos participantes.

Distúrbio mineral ósseo e calcificação vascular em pacientes renais crônicos

Calcificações vasculares têm sido associadas aos distúrbios minerais e ósseos. As alterações nas concentrações séricas de cálcio e fosfato são fatores importantes implicados no processo da calcificação arterial na doença renal crônica. A patogênese da calcificação vascular é um mecanismo complexo e não completamente claro, podendo corresponder a um processo ativo de transformação celular e ossificação heterotópica. Além da hipercalcemia e hiperfosfatemia, estão envolvidos neste processo alterações no metabolismo de substâncias inibidoras e promotoras de calcificação como a fetuína A, osteopontina, osteoprotegerina e proteína de matriz gla. Para o diagnóstico da lesão arterial calcificada, estão disponíveis diversos métodos, um método de estimativa do risco cardiovascular baseado em radiografias simples de coluna lombar e outro método baseado em radiografias simples da pelve e das mãos. Apresentamos, a seguir, uma revisão abordando a relação entre calcificações vasculares e os distúrbios minerais.

Production of magnesium carbonates from serpentinites for CO2 mineral sequestration : optimisation towards industrial application

Global warming is one of the most alarming problems of this century. Initial scepticism concerning its validity is currently dwarfed by the intensification of extreme weather events whilst the gradual arising level of anthropogenic CO2 is pointed out as its main driver. Most of the greenhouse gas (GHG) emissions come from large point sources (heat and power production and industrial processes) and the continued use of fossil fuels requires quick and effective measures to meet the world’s energy demand whilst (at least) stabilizing CO2 atmospheric levels. The framework known as Carbon Capture and Storage (CCS) – or Carbon Capture Utilization and Storage (CCUS) – comprises a portfolio of technologies applicable to large‐scale GHG sources for preventing CO2 from entering the atmosphere. Amongst them, CO2 capture and mineralisation (CCM) presents the highest potential for CO2 sequestration as the predicted carbon storage capacity (as mineral carbonates) far exceeds the estimated levels of the worldwide identified fossil fuel reserves. The work presented in this thesis aims at taking a step forward to the deployment of an energy/cost effective process for simultaneous capture and storage of CO2 in the form of thermodynamically stable and environmentally friendly solid carbonates. R&D work on the process considered here began in 2007 at Åbo Akademi University in Finland. It involves the processing of magnesium silicate minerals with recyclable ammonium salts for extraction of magnesium at ambient pressure and 400‐440⁰C, followed by aqueous precipitation of magnesium in the form of hydroxide, Mg(OH)2, and finally Mg(OH)2 carbonation in a pressurised fluidized bed reactor at ~510⁰C and ~20 bar PCO2 to produce high purity MgCO3. Rock material taken from the Hitura nickel mine, Finland, and serpentinite collected from Bragança, Portugal, were tested for magnesium extraction with both ammonium sulphate and bisulphate (AS and ABS) for determination of optimal operation parameters, primarily: reaction time, reactor type and presence of moisture. Typical efficiencies range from 50 to 80% of magnesium extraction at 350‐450⁰C. In general ABS performs better than AS showing comparable efficiencies at lower temperature and reaction times. The best experimental results so far obtained include 80% magnesium extraction with ABS at 450⁰C in a laboratory scale rotary kiln and 70% Mg(OH)2 carbonation in the PFB at 500⁰C, 20 bar CO2 pressure for 15 minutes. The extraction reaction with ammonium salts is not at all selective towards magnesium. Other elements like iron, nickel, chromium, copper, etc., are also co‐extracted. Their separation, recovery and valorisation are addressed as well and found to be of great importance. The assessment of the exergetic performance of the process was carried out using Aspen Plus® software and pinch analysis technology. The choice of fluxing agent and its recovery method have a decisive sway in the performance of the process: AS is recovered by crystallisation and in general the whole process requires more exergy (2.48–5.09 GJ/tCO2sequestered) than ABS (2.48–4.47 GJ/tCO2sequestered) when ABS is recovered by thermal decomposition. However, the corrosive nature of molten ABS and operational problems inherent to thermal regeneration of ABS prohibit this route. Regeneration of ABS through addition of H2SO4 to AS (followed by crystallisation) results in an overall negative exergy balance (mainly at the expense of low grade heat) but will flood the system with sulphates. Although the ÅA route is still energy intensive, its performance is comparable to conventional CO2 capture methods using alkanolamine solvents. An energy‐neutral process is dependent on the availability and quality of nearby waste heat and economic viability might be achieved with: magnesium extraction and carbonation levels ≥ 90%, the processing of CO2‐containing flue gases (eliminating the expensive capture step) and production of marketable products.

Adubação orgânica e mineral na produção de sementes de abobrinha

Este estudo teve o objetivo de verificar os efeitos da adubação orgânica e mineral sobre os componentes do rendimento e potencial produtivo de sementes de Cucurbita pepo L. var melopepo cv. Caserta. A pesquisa foi conduzida no Centro Agrícola Demonstrativo da Prefeitura de Porto Alegre durante os anos de 2002/03. Os tratamentos consistiram em T1 = testemunha, T2 = adubação mineral e do T3 ao T6 em adubação orgânica (cama de aviário), nas doses de 63, 125, 187 e 250g.cova-1, respectivamente. O delineamento experimental foi o de blocos casualizados com três repetições. Foram determinados número de flores.planta-1, número de frutos.planta-1, peso médio de frutos, peso de sementes.fruto-1, número de sementes.fruto-1, peso de 1000 sementes e rendimento de sementes.área-1. A aplicação de cama de aviário aumentou o rendimento de sementes de abobrinha. A dose de cama de aviário que proporcionou maior rendimento de sementes (3,12t.ha-1) foi de 250g.cova-1.

Influência de sistemas de culturas, mucuna preta e adubação mineral sobre a qualidade fisiológica de sementes de milho

O cultivo do milho em consórcio e a utilização de leguminosas como forma de adubação é prática bastante utilizada pelo agricultor nordestino. Desta forma, o presente trabalho teve como objetivo avaliar a qualidade fisiológica das sementes de milho, cv. BR-106, produzidas em sistemas de culturas isolados e consorciados (milho, milho + feijão guandu e milho + fava), na ausência e presença de adubo químico e mucuna preta. O ensaio foi conduzido no Laboratório de Análise de Sementes da Universidade Federal da Paraíba - Campus II, Areia - PB. Independentemente dos sistemas de culturas, adubo mineral e mucuna preta, a germinação, a emergência de plântulas em areia e o índice de velocidade de emergência foram altos. De acordo com os resultados, observa-se que o adubo mineral favorece a viabilidade e o vigor das sementes de milho; a mucuna preta além de não competir com os sistemas de culturas favorece a qualidade fisiológica das sementes de milho provenientes do consórcio e o consórcio de milho + guandu favorece o vigor das sementes de milho.

Physiological potential of Brachiaria brizantha cv. Marandu seeds kept in contact with phosphatic fertilizers

The effect of mixture of seeds of Brachiaria brizantha, cv. Marandu, with different sources, granulometry, and phosphatic fertilizer doses during various periods of exposure on the physiological potential of the seeds has been assessed. The treatments consisted in seed exposure during periods of 0, 3, 6, 12, 24, 36, 48, 72, 96, and 120 h to the following fertilizers: ground granulated single superphosphate (SS), and powdered (SSp); and ground granulated ammonium monophosphate (AMP), at doses of 40 and 80 kg P2O5 ha-1. Tests of germination, tetrazolium, moisture content, and vigor (first count, electrical conductivity, emergence, emergence speed, and fresh mass of seedlings) were performed. It has been concluded that seed physiological potential of B. brizantha cv. Marandu is reduced with increase on the exposure period to phosphatic fertilizer. Such effect, however, is dependent on the product source, granulometry, and dose. SSp was the most harmful to seeds, followed by SSp and AMP, respectively. Moreover, considering a 60% germination rate as acceptable, it may be inferred that seeds can be kept in contact with AMP and SSp, in dose of 80 kg of P2O5 ha-1, respectively, for periods of 71.2 and 16.2 hours.