Nitrates - loss processes in raw water

This project investigated the production of nitrate (nitrification) by bacteria in lakes. The work was undertaken as nitrification is a key process in the nitrogen cycle and previous estimates of rates of nitrification were unreliable. When different methods were used to estimate rates of nitrification within sediment deposits different results were obtained. Investigation' of specific aspects of these methodologies has allowed some rationalization of these observations and also enabled comparisons of previously published data which, beforehand, was not possible. However, it was not clear which methods gave the most reliable rate estimates. Calculation of a nitrate budget for Grasmere lake indicated that the use of methods which involved the mixing of surface sediments (and therefore disrupted preformed nutrient gradients) overestimated the rate of nitrification. The study concludes that slight changes in the method used to prepare sediment slurries can result in large changes, in the measured nitrifying activity. This makes comparisons between studies, using different methods, extremely difficult. Methods to study sediment nitrification processes which do not disrupt preformed substrate gradients within the sediment provide the most reliable rate estimates.

The rate and mechanism of the partial oxidation of acetaldehyde by PPM concentrations of nitrogen dioxide

The thermal reaction between nitrogen dioxide and acetaldehyde in the gas phase was investigated at room temperature and atmospheric pressure. The initial rate of disappearance of nitrogen dioxide was 1.00 ± 0.03 order with respect to nitrogen dioxide and 1.00 ± 0.07 order with respect to acetaldehyde. An initial second order rate constant of (8.596 ± 0.189) x 10^-3 1.mole^-1 sec^-1 was obtained at 22.0 ± 0.1 °C and a total pressure of one atmosphere. The activation energy of the reaction was 12,900 cal/mole in the temperature range between 22°C and 122°C.

The products of the reaction were nitric oxide, carbon dioxide, methyl nitrite, nitromethane and a trace amount of trans-dimeric nitrosomethane. The addition of nitric oxide increased the rate of formation of nitromethane and decreased the rate of formation of methyl nitrite. There were no measurable surface effects due to the addition of glass wool or glass beads to the reactor.

Reactants and products were analyzed by gas chromatography. A mechanism was proposed incorporating the principal features of the reaction.

A high-speed image sensing technique with adjustable frame rate based on an ordinary CCD

In the sinusoidal phase modulating interferometer technique, the high-speed CCD is necessary to detect the interference signals. The reason of ordinary CCD's low frame rate was analyzed, and a novel high-speed image sensing technique with adjustable frame rate based on ail ordinary CCD was proposed. And the principle of the image sensor was analyzed. When the maximum frequency and channel bandwidth were constant, a custom high-speed sensor was designed by using the ordinary CCD under the control of the special driving circuit. The frame rate of the ordinary CCD has been enhanced by controlling the number of pixels of every frame; therefore, the ordinary of CCD can be used as the high frame rate image sensor with small amount of pixels. The multi-output high-speed image sensor has the deficiencies of low accuracy, and high cost, while the high-speed image senor with small number of pixels by using this technique can overcome theses faults. The light intensity varying with time was measured by using the image sensor. The frame rate was LIP to 1600 frame per second (f/s), and the size of every frame and the frame rate were adjustable. The correlation coefficient between the measurement result and the standard values were higher than 0.98026, and the relative error was lower than 0.53%. The experimental results show that this sensor is fit to the measurements of sinusoidal phase modulating interferometer technique. (c) 2007 Elsevier GmbH. All rights reserved.

Repetition rate stabilization of the SBS Q-switched fiber laser by external injection

Repetition rate fluctuation is one of the main drawbacks of the low-threshold stimulated Brillouin scattering (SBS) Q-switched fiber laser. A method to stabilize the repetition rate is proposed in this paper by injecting a square-wave modulated light. It is measured experimentally that variance of the repetition rate can be improved from similar to 20% to similar to 1% of the period. It is also found that effectiveness of the method depends on modulation frequency and duty cycle of the injection. Its working mechanism is analyzed qualitatively. (C) 2009 Optical Society of America

Efeitos de dois regimes de aplicação de clodronato dissódico na reabsorção radicular e movimentação dentária em Rattus norvegicus

O objetivo dos autores foi avaliar microscopicamente, a influência de dois regimes de aplicação do clodronato dissódico na movimentação dentária e reabsorção radicular de Rattus novergicus. Foram utilizados 63 ratos, adultos, machos, com dentição permanente completa e peso aproximado de 300g. Os animais foram divididos em três grupos com 21 espécimes cada: Grupo Controle, animais submetidos à movimentação dentária induzida sem aplicação do medicamento; Grupo A, animais submetidos à movimentação com aplicação do Clodronato por via subcutânea em dias alternados; Grupo B, animais submetidos à movimentação e aplicação da droga por via subcutânea apenas no quinto e décimo segundo dias. Para avaliar os eventos celulares que ocorrem durante todo o ciclo de movimentação, os grupos foram subdivididos em três, com sete animais cada um e foi realizada a eutanásia no sétimo, décimo e décimo quarto dias. Este procedimento foi realizado com anestesia por inalação de dietil-éter e administração intra-abdominal de 40mg/Kg de pentobarbital sódico. As peças foram incluídas em parafina e os cortes teciduais (4-6m), corados por Hematoxilina-Eosina, foram usados para observações gerais e avaliação quantitativa em microscópio de luz. A análise dos resultados foi feita utilizando análise de variância (ANOVA) e o teste de Tukey foi utilizado para comparações múltiplas entre as médias. Foi considerado o nível de significância em 5%. A taxa de movimentação foi menor no Grupo A quando comparado ao grupo controle sendo estatisticamente significante (p< 0,01). No Grupo B, a taxa de movimentação foi menor que no grupo controle e maior que no Grupo A, porém sem significância estatística. Para as variáveis lacunas de reabsorção e número de osteoclastos houve diferença estatisticamente significativa quando o grupo controle foi comparado aos dois outros grupos. De acordo com os resultados, o Clodronato reduz a reabsorção radicular e a movimentação dentária, mas este último aspecto pode ser minimizado a depender do regime de aplicação do medicamento.

A Q-swicthed all-solid-state single-longitudinal-mode laser with adjustable pulse-width and high repetition rate

A single-longitudinal-mode (SLM) laser-diode pumped Nd: YAG laser with adjustable pulse width is developed by using the techniques of pre-lasing and changing polarization of birefingent crystal. The Q-switching voltage is triggered by the peak of the pre-lasing pulse to achieve the higher stability of output pulse energy. The output energy of more than 1 mJ is obtained with output energy stability of 3% (rms) at 100 Hz. The pulse-width can be adjusted from 30 ns to 300 ns by changing the Q-switching voltage. The probability of putting out single-longitudinal-mode pulses is almost 100%. The laser can be run over four hours continually without mode hopping.

20-W average power, high repetition rate, nanosecond pulse with diffraction limit from an all-fiber MOPA system

In this article, we report an all-fiber master oscillator power amplifier (MOPA) system, which can provide high repetition rate and nanosecond pulse with diffraction-limit. The system was constructed using a (2 + 1) X 1 multimode combiner. The Q-Switched, LD pumped Nd:YVO4 solid-state laser wets used (is master oscillator. The 976-nm fiber-coupled module is used as pump source. A 10-m long China-made Yb3+-doped D-shape double-clad large-mode-area fiber was used as amplifier fiber. The MOPA produced as much as 20-W average power with nanosecond pulse and near diffraction limited. The pulse duration is maintained at about 15 its during 50-175 kHz. The system employs a simple and compact architecture and is therefore suitable for the use in practical applications such as scientific and military airborne LIDAR and imaging. Based oil this system. the amplification performances of. the all fiber amplifier is investigated. (C) 2008 Wiley Periodicals, Inc.

High-repetition-rate MHz acoustooptic Q-switched fiber laser

A simple actively Q-switched double-clad fiber laser combining an amplifying cavity is reported by using a dynamic acoustooptic Q-switching as a beam splitter. Sub-100-ns. pulses independence of the repetition rate of acoustooptic modulator are almost changeless with repetition rate varied from 50 kHz to 1.5 MHz. With 4.5-W absorbed power, 9.4-W peak-power pulses at 1.5-MHz repetition rate with 75-ns pulse duration are generated.

Evaluation of the nutrient composition of some unconventional feedstuffs

A trial was carried out to evaluate the nutrient composition of some unconventional feedstuffs to ascertain their suitability for incorporation into fish feed. Pawpaw seed, mudskipper meal, water melon seed, almond kernel and groundnut husk were processed and analyzed for their proximate and mineral composition using internationally established procedure. The results obtained showed that the experimental feed stuffs had percentage crude protein that ranged from 7.38% to 55.85%. The highest level (55.85%) was found in mudskipper meal while the lowest (7.38%) was found in groundnut husk. The experimental feed stuffs had appreciable levels of calcium, potassium and phosphorus ranging from 0.29% to 1.87%, 0.17 to 1.26 and 0.06 to 0.97 respectively. Almond kernel can be used to replace soybean meal in aqua feed. Also, mudskipper meal can be used to replace fish meal in order to produce a cheaper fish feed; but it was recommended that feeding trials should be conducted to ascertain the inclusion level at which they can be effectively incorporated. The potentials of some of these feedstuffs in fish feed formulation seem high.