Short terms effects of air pollution from biomass burning in mucociliary clearance of Brazilian sugarcane cutters

Nasal mucociliary system is the first line of defense of the upper airways and may be affected acutely by exposure to particulate matter (PM) from biomass burning. Several epidemiologic studies have demonstrated a consistent association between levels of air pollution from biomass burning with increases in hospitalization for respiratory diseases and mortality. To determine the acute effects of exposure to particulate matter from biomass burning in nasal mucociliary transport by saccharin transit time (STT) test, we studied thirty-three non-smokers and twelve light smokers sugarcane cutters in two periods: pre-harvest season and 4 h after harvest at the first day after biomass burning. Lung function, exhaled carbon monoxide (CO), nasal symptoms questionnaire and mucociliary clearance (MC) were assessed. Exhaled CO was increased in smokers compared to non-smokers but did not change significantly after harvest. In contrast, SIT was similar between smokers and non-smokers and decreased significantly after harvest in both groups (p < 0.001). Exposure to PM from biomass burning did not influence nasal symptoms. Our results suggest that acute exposure to particulate matter from sugarcane burned affects mucociliary clearance in smokers and non-smokers workers in the absence of symptoms. (C) 2011 Elsevier Ltd. All rights reserved.

The Influence of Gender and Facial Appearance on Voting Practices

Women’s faces tend to naturally retain more neonate features than men. These features, such as a greater eye height, a smaller nose area, and a wider smile, would cause women to have more immature faces than males. Interestingly, women who have these facial features are often perceived as more attractive than women with mature facial features. These findings imply that women would be judged less competent than men, and that immature-faced women would be perceived as less competent and more attractive than mature-faced females. Given the direction of political leadership in our country, this has interesting implications for females that are vying for leadership positions. Thus, our study examined the effects of both candidate gender and facial features on voting likelihood, and perceptions of attractiveness and competence, by pairing pictures with neutral party platforms.

Recurso ordinário no processo no trabalho

Os recursos são os rémedios mais utilizados para impugnar decisões judiciais, que nada mais é que o direito ao duplo grau de jurisdição, onde o ser humano nãose conformando com a decisão proferida pelo juiz de primeira instância, tem direito a um reexame por uma segunda instância.Cabe recurso ordinário, primeiramente das decisões definitivas em que se extingue o processo com julgamento do mérito e, ainda das decisões terminativas que se extingue o processo sem julgamento do mérito.É pressuposto para interposição de recurso o pagamento de custas que deverá ser efetuado pela parte vencida.A reclamada deverá fazer o depóssito recursal se desejar recorrer, ainda o prazo para interposição de recurso ordinário no processo trabalhista é muito semelhante a apelação no processo civil.

Corpos amputados e suas próteses : a intervenção técnica (re)inventando formas de ser e de habitar o corpo na contemporaneidade

Baseada na perspectiva teórica do campo dos Estudos Culturais e sócio-históricos sobre o corpo, esta dissertação analisou os significados culturais que os indivíduos atribuíam aos seus corpos e suas vidas cotidianas após terem sido submetidos a amputação e se tornarem usuários de prótese. O material empírico foi coletado através da observação participante, do diário de campo e da entrevista semi-estruturada, realizada numa clínica ortopédica privada, situada em Porto Alegre, especializada na reabilitação e protetização de indivíduos que foram submetidos a amputação. O grupo participante do estudo foi: o fisioterapeuta e o protesista, e por nove pacientes da clínica, homens e mulheres, todos amputados de um membro inferior, com idades variando entre 18 e 82 anos, sendo que apresentavam em comum o fato de terem se tornado amputados após um acidente ou em decorrência da diabete. A pesquisa de campo foi desenvolvida no período de Fevereiro de 2003 a Setembro de 2003, através da participação de sessões de fisioterapia, das reuniões mensais dos grupos de apoio aos amputados, onde foi acompanhado o processo de adaptação à prótese. O estudo consistiu em problematizar os efeitos provocados na vida cotidiana destes indivíduos pelas transformações ocorridas em seus corpos secundários à amputação, bem como aqueles produzidos pelo "acoplamento" com a prótese, buscando tornar visível o processo vivenciado por eles, ou seja, o estranhamento e a naturalização do seu "novo" corpo fabricado pelas tecnologias. A dissertação representa, portanto, as reflexões construídas a partir da investigação desenvolvida especificamente neste grupo, onde o corpo amputado e protetizado foi vislumbrado como algo produzido e ressignificado na cultura, sendo assim moldável, provisório e reinventado continuamente.

Preconceito e estereótipos relativos a cor, sexo e status

Esta pesquisa investiga os estereótipos positivos e/ou negativos, quando considerados como variáveis de cor, sexo status. O instrumento utilizado consistiu de oito desenhos estímulos, sendo quatro homens e quatro mulheres: homem branco de status alto (HBR), homem negro de status alto (HNR), homem branco de status baixo (HBP), homem negro de status baixo (HNP), mulher branca de status alto (MBR), mulher negra de status alto (MNR), mulher branca de status baixo (MBP) e mulher negra de status baixo (MNP), distribuídos equitativamente pela amostra, em um questionário com nove itens objetivos para pedir sobre o desenho estímulo, a distância social, a escolaridade, a posição hierárquica no trabalho, a ocupação desempenhada pelo estímulo e por seus pais para averiguar a mobilidade social, a classe sócio econômica e um item em aberto para apreender como a amostra percebe os estímulos. A amostra foi composta de 930 sujeitos: 482 de cor epidérmica e atributos físicos (boca, cabelos e sujeitos nariz) brancos e 448 sujeitos negros de cor epidérmica e atributos físicos negros, ou cor epidérmica branca e atributos físicos negros, ou cor epidérmica negra e atributos físicos brancos, atribuídos pelo experimentador. Estes mesmos sujeitos se auto classificaram como sendo 602 sujeitos "brancos" e 328 sujeitos negros. A hipótese básica testada foi: "Há estereótipos positivos e negativos relativos à cor, sexo e status." O único item que rejeitou a hip6tese nula básica, foi aquele sobre a ocupação desempenhada pelas figuras-estímulos onde as amostras brancas, atribuída pelo experimentador e autoclasificada, e negra autoclassificada corno branca, rejeitaram-na quanto às variáveis de sexo e status, sugerindo que os estereótipos aparecem de acordo com as ocupações atribuídas, quanto ao sexo e status das figuras-estímulos. As amostras negras, atribuída pelo experimentador e autoclassificada, rejeitaram-nas três variáveis, mostrando a influência da cor, sexo e status, separadamente, sobre o estereótipo medido através da ocupação atribuída aos estímulos, além da interação cor X status, sugerindo também a presença do estereótipo ocupacional, quando a cor se associa ao status dos desenhos. A amostra negra, atribuída pelo experimentador, rejeita-a, ainda, na interação cor X sexo X status parecendo existir discriminação quanto as ocupações dadas aos estímulas, quando estas três variáveis se associam. As amostras brancas, atribuída pelo experimentador e autoclassificada, apresentaram respostas ambíguas na maioria dos itens. As amostras negras, atribuída pelo experimentador e autoclassificada, não mostraram diferenças significativas entre as respostas, em parte dos itens. O critério ABIPEME expressou que ambas as amostras branca e negra, atribuídas pelo experimentador, apresentaram alta escolaridade e bom nível sócio-econômico. O número de mulheres era superior ao número de homens, embora homens e mulheres se equivalessem em ambas as amostras, o que sugere que mulheres brancas e negras e homens negros se com portaram de acordo com os valores culturais e dominantes, demonstrando auto-desvalorização e baixa auto-estima.

Análise da estabilidade genética de células-tronco mesenquimais humanas

Human multipotent mesenchymal stromal cells (MSCs), also known as mesenchymal stem cells, have become an important and attractive therapeutic tool since they are easily isolated and cultured, have in vitro expansion potential, substantial plasticity and secrete bioactive molecules that exert trophic effects. The human umbilical cord as a cell source for cell therapy will help to avoid several ethical, political, religious and technical issues. One of the main issues with SC lines from different sources, mainly those of embryonic origin, is the possibility of chromosomal alterations and genomic instability during in vitro expansion. Cells isolated from one umbilical cord exhibited a rare balanced paracentric inversion, likely a cytogenetic constitutional alteration, karyotype: 46,XY,inv(3)(p13p25~26). Important genes related to cancer predisposition and others involved in DNA repair are located in 3p25~26. Titanium is an excellent biomaterial for bone-implant integration; however, the use can result in the generation of particulate debris that can accumulate in the tissues adjacent to the prosthesis, in the local bone marrow, in the lymph nodes, liver and spleen. Subsequently may elicit important biological responses that aren´t well studied. In this work, we have studied the genetic stability of MSC isolated from the umbilical cord vein during in vitro expansion, after the cryopreservation, and under different concentrations and time of exposition to titanium microparticles. Cells were isolated, in vitro expanded, demonstrated capacity for osteogenic, adipogenic and chondrogenic differentiation and were evaluated using flow cytometry, so they met the minimum requirements for characterization as MSCs. The cells were expanded under different concentrations and time of exposition to titanium microparticles. The genetic stability of MSCs was assessed by cytogenetic analysis, fluorescence in situ hybridization (FISH) and analysis of micronucleus and other nuclear alterations (CBMN). The cells were able to internalize the titanium microparticles, but MSCs preserve their morphology, differentiation capacity and surface marker expression profiles. Furthermore, there was an increase in the genomic instability after long time of in vitro expansion, and this instability was greater when cells were exposed to high doses of titanium microparticles that induced oxidative stress. It is necessary always assess the risks/ benefits of using titanium in tissue therapy involving MSCs, considering the biosafety of the use of bone regeneration using titanium and MSCs. Even without using titanium, it is important that the therapeutic use of such cells is based on analyzes that ensure quality, security and cellular stability, with the standardization of quality control programs appropriate. In conclusion, it is suggested that cytogenetic analysis, FISH analysis and the micronucleus and other nuclear alterations are carried out in CTMH before implanting in a patient

Influência do número de refundições da liga Ni-Cr-Mo-Ti sobre as propriedades de próteses metalocerâmicas

A frequently encountered difficulty in oral prosthetics is associated with the loss of metallic alloys during the melting stage of the production of metal-ceramic replacement systems. Remelting such materials could impar their use in oral rehabilitation due to loss in esthetics, as well as in the chemical, physical, electrochemical and mechanical properties. Nowadays, the Ni-Cr-Mo-Ti alloy is widely used in metal-ceramic systems. Manufacturers state that this material can be remelted without significant alterations in its behavior, however little has been established as to the changes in the performance of this alloy after successive remelting, which is common practice in oral prosthetics. Therefore, the objective of this study was to evaluate possible changes in the esthetics and associated properties of metalceramic samples consisting of Ni-Cr-Mo-Ti and dental porcelain. Three to five remelting steps were carried out. The results revealed that Ni-Cr-Mo-Ti can be safely used even after three remelting steps. Further remelting significantly affect the characteristics of the alloys and should not be recommended for the manufacture of metal-ceramic systems

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles

Estudo da viabilidade do processo de reciclagem do material descartado do sistema Zirkonzanh® de produção de próteses dentárias

At present, the material of choice for performing aesthetic dental prosthetic work is in the ceramic. Among them, the ceramic base of stabilized zirconia with 3% yttria (3Y - TZP) stand out for having excellent physical and mechanical properties. During the machining of blocks of zirconia in the laboratory to prepare the various types of prostheses, much of the material is given off in the form of powder, which is subsequently discarded. The waste of this material results in financial loss, reflecting higher final cost treatment for patients, as well as damage to the environment, thanks to the processes involved in the manufacture and disposal of the ceramic. This research, pioneered the recycling of zirconium oxide powder obtained during milling of dental crowns and bridges, we highlight the social and environmental aspects and aims to establish a protocol for the reuse of waste (powder of zirconia Zirkonzahn® system) discarded to obtain a new block of compacted zirconia to maintain the same mechanical and microstructural properties of commercial high-cost imported material. To compare with the commercial material, samples were uniaxially (20 MPa) and isostatically (100 MPa), and its mechanical and microstructural characterization was performed through tests of density, porosity, dilatometry, X-ray diffraction (XRD), hardness, fracture toughness, resistance to fracture electron microscopy (SEM) and analysis of grain size. The results observed in the samples were isostatically pressed similiares those obtained with samples from the commercial material demonstrating the viability of the process

Estudo psicossocial das perdas dentárias na terceira idade

The present study seeks to understand tooth loss by investigating the social representations in the daily life of elderly individuals, thus characterizing itself as a comparative and analytic research. It is known that tooth loss is a common occurrence in elderly individuals, interfering at the psychosocial and biological levels, through its functional, esthetical and social implications. The area of oral health in Brazil is lacking studies on this topic, especially with respect to the psychosocial aspects of the elderly. The Theory of Social Representations and the Central Nucleus Theory were selected for theoretical-methodological support. The Free Association of Words Test was used, whose inducing stimulus were the words tooth loss , in which each subject was asked to associate 3 words, to respond to a questionnaire related to socio-economic conditions and containing an investigation of tooth loss, access to odontological services and the need for dental treatment, and to undergo a focus group interview. The study sample consisted of 120 individuals 60 years of age or over, resident in Natal, RN, Brazil and participants of the Live Together to Live Better group of the Basic Health Unit of Felipe Camarão Residential District and Unati (Open University of the Elderly); an interview was performed with 36 subjects. Data analysis was performed by Evoc 2000, SPSS/99, Graph Pad and Alceste softwares. The results demonstrate that the central nucleus of the social representations of tooth loss for the Live Together group emerged from the difficulty in eating categories, showing a relation between physiologic necessity, desire and pleasure from eating, not to mention the pain that resulted from justifying the tooth loss. Besides the central discourses, the following peripheral elements were gathered: difficulty in adapting to the prosthesis, treatment and difficulty in speaking. All of these categories, except the last, also comprised the class themes of the group interview. For the Unati group the central nucleus emerged from the socio-economic difficulties categories, demonstrating a narrow relation between poverty, access to health and education and esthetics, confirming in the discourse of common sense, the association between tooth loss and aging. At the margin of the central discourses was collected the peripheral element difficulty in adapting to the prosthesis, found both in the Live Together and Unati groups, which expresses the resistance of the subject to this new situation and the failure of the rehabilitation treatment in the sense of reviving the memory of their natural teeth. All of these categories also constitute the class themes of the of the group interview. Thus, through the study of the social representations, we can reveal a reality in the perspective of the social subjects, contemplating the multiple facets of the social-cultural reality experienced by these individuals

Repair of lamellar scleral lesions in dogs with preserved equine renal capsule: short report

OBJETIVO: Avaliar o uso da cápsula renal de eqüino preservada em glicerina 98% no reparo de lesões lamelares esclerais em cães. MÉTODOS: Foram utilizados 12 cães, machos e fêmeas, com peso médio de 12kg. Foram realizadas avaliações clínica e morfológica aos 1, 3, 7, 15, 30 e 60 dias de pós-operatório. Após anestesia geral e procedimentos padrões de preparo do campo operatório, foi realizada cantotomia temporal, seguida de incisão conjutival e escleral com área de 0,5x0,5 cm na posição de 1hora, próxima ao limbo. em seguida, um fragmento de mesma dimensão de cápsula renal de eqüino preservada em glicerina, previamente hidratado em solução salina, foi aplicado ao defeito escleral criado sendo fixado com pontos simples isolados com vicryl 7-0®. RESULTADOS: A avaliação clínica revelou blefaroespasmo/fotofobia até o sétimo dia de pós-operatório. Foi observado edema conjuntival até o quinto dia, acompanhado de secreção ocular mucóide, que persistiu até o décimo dia de pós-operatório. Não foram observados sinais clínicos de rejeição do enxerto em todos os animais, em todos os períodos avaliados. Os segmentos anterior e posterior do bulbo ocular não apresentaram sinais de inflamação. A análise morfológica revelou exsudação inflamatória aguda nos períodos precoces e intermediários da avaliação e inflamação crônica nos períodos tardios da observação. Houve incorporação do enxerto ao leito receptor. CONCLUSÃO: Os resultados sugerem que a cápsula renal de eqüino preservada pode ser mais uma alternativa de membrana biológica para o reparo de lesões esclerais lamelares em cães e no homem.

Emprego de escama de sardinha (Sardinella brasiliensis - STEIDACHNER, 1859), conservada em glicerina, em ceratoplastias lamelares experimentais em cães

Estudou-se experimentalmente a escama de sardinha (Sardinella brasiliensis) como substituto de córneas no reparo de ceratectomias superficiais em cães. Utilizaram-se 14 animais, machos e fêmeas, sem raça definida, com peso médio de 10 kg, considerados sadios. Analisaram-se, macro e microscopicamente, as córneas receptoras bem como o material implantado aos 1, 3, 7, 14, 30 e 60 dias de pós-operatório. As evidências clínicas para a enxertia lamelar mostraram fotofobia e blefarospasmo mais incidentes nos períodos iniciais e intermediários, com tendência à regressão nos tardios. Revelaram edema discreto e igualmente regressivo; neoformação vascular mais incidente nas fases intermediárias e pouco nas tardias. O estudo microscópico evidenciou quadro reacional compatível com padrão benigno a exemplo do que fora visto macroscopicamente. Ambos retrataram boa adesividade da prótese, epitélio e estroma neoformados, sob e sobrepostos a ela. A transparência das córneas receptoras, junto às zonas de enxertia, manteve-se por 14 dias. Para a enxertia interlamelar, observou-se quadro reacional pouco significativo. Para ambas as enxertias, não foram observados sinais de extrusão do material implantado. A escama de sardinha pode ser empregada para fins tectônicos, com bons resultados em ceratoplastias lamelares em cães.

Real time B-mode ultrasound in pacas pregnancy (Agouti paca, Linnaeus, 1766)

O objetivo deste estudo foi estabelecer o tempo de prenhez da paca por meio de ultra-sonografia. Nove pacas prenhes foram periodicamente acompanhadas com um transdutor eletrônico setorial bi-frequencial de 5,0 e 7,5 MHz, em modo B, desde a detecção ultra-sonográfica da vesícula embrionária ou do feto até o nascimento dos filhotes. Os animais foram colocados em uma gaiola de ferro de prensagem lateral e permaneceram em posição quadrupedal durante as sessões. Um pano escuro foi usado para cobrir a gaiola e frutas foram oferecidas durante o exame ultra-sonográfico para evitar reações agressivas. Quanto mais precocemente ocorreu a detecção de prenhez, maior foi o período de acompanhamento ultra-sonográfico até o nascimento dos filhotes. Apenas um filhote nasceu por parto, com 796,5 ± 74,36 gramas (valor médio ± desvio padrão da amostra) e 33,46 ± 0,60 centímetros (valor médio ± desvio padrão da amostra) de comprimento (entre a borda rostral do focinho e a extremidade distal da cauda). O período de prenhez da paca abrange 135 a 139 dias.

CAD e engenharia reversa como ferramentas de auxílio na fabricação de cartuchos para próteses ortopédicas

The manufacturing of above and below-knee prosthesis starts by taking surfac measurements of the patient s residual limb. This demands the making of a cartridg with appropriate fitting and customized to the profile of each patient. The traditiona process in public hospitals in Brazil begins with the completion of a record file (according to law nº388, of July 28, 1999 by the ministry of the health) for obtaining o the prosthesis, where it is identified the amputation level, equipment type, fitting type material, measures etc. Nowadays, that work is covered by the Brazilian Nationa Health Service (SUS) and is accomplished in a manual way being used commo measuring tapes characterizing a quite rudimentary, handmade work and without an accuracy.In this dissertation it is presented the development of a computer integrate tool that it include CAD theory, for visualization of both above and below-knee prosthesis in 3D (i.e. OrtoCAD), as well as, the design and the construction a low cos electro-mechanic 3D scanner (EMS). This apparatus is capable to automatically obtain geometric information of the stump or of the healthy leg while ensuring smalle uncertainty degree for all measurements. The methodology is based on reverse engineering concepts so that the EMS output is fed into the above mentioned academi CAD software in charge of the 3D computer graphics reconstruction of the residualimb s negative plaster cast or even the healthy leg s mirror image. The obtained results demonstrate that the proposed model is valid, because it allows the structura analysis to be performed based on the requested loads, boundary conditions, material chosen and wall thickness. Furthermore it allows the manufacturing of a prosthesis cartridge meeting high accuracy engineering patterns with consequent improvement in the quality of the overall production process

Reduction of enantioselectivity in the kinetic disposition and metabolism of verapamil in rats exposed to toluene

Toluene and verapamil are subject to extensive oxidative metabolism mediated by CYP enzymes, and their interaction can be stereoselective. In the present study we investigated the influence of toluene inhalation on the enantioselective kinetic disposition of verapamil and its metabolite, norverapamil, in rats. Male Wistar rats (n = 6 per group) received a single dose of racemic verapamil (10 mg/kg) orally at the fifth day of nose-only toluene or air (control group) inhalation for 6 h/day (25, 50, and 100 ppm). Serial blood samples were collected from the tail up to 6 h after verapamil administration. The plasma concentrations of verapamil and norverapamil enantiomers were analyzed by LC-MS/MS by using a Chiralpak AD column. Toluene inhalation did not influence the kinetic disposition of verapamil or norverapamil enantiomers (p > 0.05, Kruskal-Wallis test) in rats. The pharmacokinetics of verapamil was enantioselective in the control group, with a higher plasma proportion of the S-verapamil (AUC 250.8 versus 120.4 ng.h.mL(-1); p <= 0.05, Wilcoxon test) and S-norverapamil (AUC 72.3 versus 52.3 ng.h.mL(-1); p <= 0.05, Wilcoxon test). Nose-only exposure to toluene at 25, 50, or 100 ppm resulted in a lack of enantioselectivity for both verapamil and norverapamil. The study demonstrates the importance of the application of enantioselective methods in studies on the interaction between solvents and chiral drugs.