Relationship between stress-induced martensitic transformation and impact toughness in low carbon austenitic steels

The effect of test temperature, which controls the stability of austenite, on the impact toughness of a low carbon Fe-Ni-Mn-C austenitic steel and 304 stainless steel, has been investigated. Under impact conditions, stress-induced martensitic transformation occurred, in a region near the fracture surface, at test temperatures below 80degreesC for the Fe-Ni-Mn-C steel and below -25degreesC for 304 stainless steel. The former shows significant transformation toughening and the highest impact toughness was obtained at 10degreesC, which corresponds to the maximum amount of martensite formed by stress-induced transformation above the Ms temperature. The stress-induced martensitic transformation contributes negatively to the impact toughness in the 304 stainless steel. Increasing the amount of stress-induced transformation to martensite, lowered the impact toughness. The experimental results can be well explained by the Antolovich theory through the analysis of metallography and fractography. The different effect of stress-induced transformation on the impact toughness in Fe-Ni-Mn-C steel and 304 stainless steel has been further understood by applying the crystallographic model for stress-induced martensitic transformation to these two steels. (C) 2002 Kluwer Academic Publishers.

Surface alloying of AZ91D alloy by diffusion coating

A new technique of surface modification by diffusion coating for AZ91D alloy was developed. A 1.0-2.0-mm alloy layer, which has hardness four to five times higher than the substrate metal, was formed after the treatment. Consequent solution treatment and aging could further improve the hardness of the alloy layer. Microstructure and chemical composition were investigated using optical microscope and electron probe.

Peroxisome proliferator-activated receptor beta expression in human breast epithelial cell lines of tumorigenic and non-tumorigenic origin

Peroxisome proliferator-activated receptor beta (PPARbeta) is a member of the nuclear hormone receptor superfamily and is a ligand activated transcription factor. although the precise genes that it regulates and its physiological and pathophysiological role remain unclear. In view of the association of PPARbeta with colon cancer and increased mRNA levels of PPARbeta in colon tumours we sought in this study to examine the expression of PPARbeta in human breast epithelial cells of tumorigenic (MCF-7 and MDA-MB-231) and non-tumorigenic origin (MCF-10A). Using quantitative RT-PCR we measured PPARbeta mRNA levels in MCF-7. MDA-MB-231 and MCF-10A cells at various stages in culture. After serum-deprivation, MDA-MB-231 and MCF-10A cells had a 4.2- and 3.8-fold statistically greater expression of PPARbeta compared with MCF-7 cells. The tumorigenic cell lines also exhibited a significantly greater level of PPARbeta mRNA after serum deprivation compared with subconfluence whereas such an effect was not observed in non-tumorigenic MCF-10A cells. The expression of PPARbeta was inducible upon exposure to the PPARbeta ligand bezafibrate. Our results suggest that unlike colon cancer. PPARbeta overexpression is not an inherent property of breast cancer cell lines. However, the dynamic changes in PPARbeta mRNA expression and the ability of PPARbeta in the MCF-7 cells to respond to ligand indicates that PPARbeta may play a role in mammary gland carcinogenesis through activation of downstream genes via endogenous fatty acid ligands or exogenous agonists. (C) 2002 Elsevier Science Ltd. All rights reserved.

Clinical and non-clinical predictors of vocational recovery for Australians with psychotic disorders

Clinical and non-clinical predictors of vocational recovery were examined among 782 Australians diagnosed with DSM III R psychotic disorders, using data from the study on low-prevalence disorders, part of the National Survey of Mental Health and Wellbeing, Australia 1997-1998. Of the six significant clinical predictors, self-reported course of illness emerged as a potentially practical predictor of vocational recovery. Five non-clinical variables, age, education and skills, marital status, premorbid work adjustment, and use of a vocational service in the previous year, also contributed to the prediction of vocational recovery. The implications of these findings for both rehabilitation professionals and researchers are discussed.

Risk factors for non-haemorrhagic stroke in patients with coronary heart disease and the effect of lipid-modifying therapy with pravastatin

Objective To determine the relative importance of recognised risk factors for non-haemorrhagic stroke, including serum cholesterol and the effect of cholesterol-lowering therapy, on the occurrence of non-haemorrhagic stroke in patients enrolled in the LIPID (Long-term Intervention with Pravastatin in Ischaemic Disease) study. Design The LIPID study was a placebo-controlled, double-blind trial of the efficacy on coronary heart disease mortality of pravastatin therapy over 6 years in 9014 patients with previous acute coronary syndromes and baseline total cholesterol of 4-7 mmol/l. Following identification of patients who had suffered non-haemorrhagic stroke, a pre-specified secondary end point, multivariate Cox regression was used to determine risk in the total population. Time-to-event analysis was used to determine the effect of pravastatin therapy on the rate of non-haemorrhagic stroke. Results There were 388 non-haemorrhagic strokes in 350 patients. Factors conferring risk of future non-haemorrhagic stroke were age, atrial fibrillation, prior stroke, diabetes, hypertension, systolic blood pressure, cigarette smoking, body mass index, male sex and creatinine clearance. Baseline lipids did not predict non-haemorrhagic stroke. Treatment with pravastatin reduced non-haemorrhagic stroke by 23% (P= 0.016) when considered alone, and 21% (P= 0.024) after adjustment for other risk factors. Conclusions The study confirmed the variety of risk factors for non-haemorrhagic stroke. From the risk predictors, a simple prognostic index was created for nonhaemorrhagic stroke to identify a group of patients at high risk. Treatment with pravastatin resulted in significant additional benefit after allowance for risk factors. (C) 2002 Lippincott Williams Wilkins.

Ultrasonic specimen radiography for non-palpable breast lesions

A retrospective review of ultrasound guided breast excisional biopsies performed in a Surgical Unit of Princess Alexandra Hospital in 1998-99 was undertaken to assess the use of ultrasound specimen radiography. In this series a total of 55 localization biopsies were performed for impalpable lesions in 53 women. In 21 patients (38%), specimen ultrasound was used to confirm that the lesion in question had been excised, whereas for 34 lesions (62%), specimen X-ray was undertaken. In a total of six cases (10.9% overall) the radiographic abnormality was seen on ultrasound only. Real-time specimen sonography is a technique which is very appropriately utilized in conjunction with ultrasound guided excisions and can be easily performed either in the radiology department or the operative suite With minimal time delay. It could have particular application for lesions that are detected in younger women with dense breast parenchyma. The results of this review confirm specimen sonography to be a reliable technique. (C) 2002 Elsevier Science Ltd. All rights reserved.

Treatment of non-resectable hepatocellular carcinoma with autologous tumor-pulsed dendritic cells

Background: The response of hepatocellular carcinoma (HCC) to therapy is often disappointing and new modalities of treatment are clearly needed. Active immunotherapy based on the injection of autologous dendritic cells (DC) co-cultured ex vivo with tumor antigens has been used in pilot studies in various malignancies such as melanoma and lymphoma with encouraging results. Methods: In the present paper, the preparation and exposure of patient DC to autologous HCC antigens and re-injection in an attempt to elicit antitumor immune responses are described. Results: Therapy was given to two patients, one with hepatitis C and one with hepatitis B, who had large, multiple HCC and for whom no other therapy was available. No significant side-effects were observed. The clinical course was unchanged in one patient, who died a few months later. The other patient, whose initial prognosis was considered poor, is still alive and well more than 3 years later with evidence of slowing of tumor growth based on organ imaging. Conclusions: It is concluded that HCC may be a malignancy worthy of DC trials and sufficient details in the present paper are given for the protocol to be copied or modified. (C) 2002 Blackwell Publishing Asia Pty Ltd.

A new level of conotoxin diversity, a non-native disulfide bond connectivity in alpha-conotoxin AuIB reduces structural definition but increases biological activity

alpha-Conotoxin AuIB and a disulfide bond variant of AuIB have been synthesized to determine the role of disulfide bond connectivity on structure and activity. Both of these peptides contain the 15 amino acid sequence GCCSYPPCFATNPDC, with the globular (native) isomer having the disulfide connectivity Cys(2-8 and 3-15) and the ribbon isomer having the disulfide connectivity Cys(2-15 and 3-8). The solution structures of the peptides were determined by NAIR spectroscopy, and their ability to block the nicotinic acetylcholine receptors on dissociated neurons of the rat parasympathetic ganglia was examined. The ribbon disulfide isomer, although having a less well defined structure, is surprisingly found to have approximately 10 times greater potency than the native peptide. To our knowledge this is the first demonstration of a non-native disulfide bond isomer of a conotoxin exhibiting greater biological activity than the native isomer.

Managing new product development in the Chinese steel industry: An empirical investigation

This study explores several important aspects of the management of new product development (NPD) in the Chinese steel industry. Specifically it explores NPD success factors, the importance of management functions to new product success and measures of new product success from the perspective of the industry's practitioners. Based on a sample of 190 industrial practitioners from 18 Chinese steel companies, the study provides a mixed picture as China makes the transition from a centrally-controlled to market-based economy. On one hand, respondents ranked understanding users' needs as the most important factor influencing the performance of the new products. Further, formulating new product strategy and strengthening market research are perceived as the most important managerial functions in NPD. However, technical performance measures are regarded as more important and are more widely used in industry than market-based or financial measures of success.