Rhachidelus Brazili Boulenger, 1908 (Squamata: Serpentes: Dipsadidae): New records, range extension and distribution map in mato grosso and mato grosso do Sul states, Brazil

The present study reports new records of the Dipsadid snake Rhachidelus brazili Boulenger, 1908, from Mato Grosso and Mato Grosso do Sul states, Brazil. Our data extend the known geographical distribution ca. 713 km to the northwest and constitute the first record in the Upper Paraguay sub-basin. © 2011 Check List and Authors.

Leposoma osvaldoi avila-pires, 1995 (Squamata: Gymnophthalmidae): New records and distribution map in the state of Mato Grosso, Brazil

The present study provides the distribution map and reports new records of the gymnophthalmid lizard Leposoma osvaldoi Avila-Pires, 1995, from Mato Grosso state, Brazil, extending the known geographical distribution of the species ca. 42 km northeastern in straight line from the nearest record in the state. © 2011 Check List and Authors.

Microstructural characterization of layers produced by plasma nitriding on austenitic and superaustenitic stainless steel grades

High chromium content is responsible for the formation of a protective passive surface layer on austenitic stainless steels (ASS). Due to their larger amounts of chromium, superaustenitic stainless steels (SASS) can be chosen for applications with higher corrosion resistance requirements. However, both of them present low hardness and wear resistance that has limited their use for mechanical parts fabrication. Plasma nitriding is a very effective surface treatment for producing harder and wear resistant surface layers on these steel grades, without harming their corrosion resistance if low processing temperatures are employed. In this work UNS S31600 and UNS S31254 SASS samples were plasma nitrided in temperatures from 400 °C to 500 °C for 5 h with 80% H 2-20% N2 atmosphere at 600Pa. Nitrided layers were analyzed by optical (OM) and transmission electron microscopy (TEM), x-ray diffraction (XRD), and Vickers microhardness testing. Observations made by optical microscopy showed that N-rich layers were uniform but their thicknesses increased with higher nitriding temperatures. XRD analyses showed that lower temperature layers are mainly composed by expanded austenite, a metastable nitrogen supersaturated phase with excellent corrosion and tribological properties. Samples nitrided at 400 °C produced a 5 μm thick expanded austenite layer. The nitrided layer reached 25 lm in specimens treated at 500 °C. There are indications that other phases are formed during higher temperature nitriding but XRD analysis was not able to determine that phases are iron and/or chromium nitrides, which are responsible for increasing hardness from 850 up to 1100 HV. In fact, observations made by TEM have indicated that formation of fine nitrides, virtually not identified by XRD technique, can begin at lower temperatures and their growth is affected by both thermodynamical and kinetics reasons. Copyright © 2012 by ASTM International.

Lepidobatrachus asper Budgett,1899 (Amphibia: Anura: Ceratophryidae): New country record, distribution map and natural history notes

Lepidobatrachus asper is a large to medium frog known from the Chaco lowlands of Paraguay and Argentina. We provide the first species record for the Brazilian Chaco, which extends the species geographical distribution ca. 73 km northeast from Puerto Casado, Alto Paraguay Departament, Paraguay. We also provide a distribution map and information about the species habitat conditions and diet. The Brazilian Chaco is still poorly surveyed, and the rapid environmental degradation can lead to local extinctions of certain species. © 2013 Check List and Authors.

Effects of (-)-cubebin (Piper cubeba) on cytotoxicity, mutagenicity and expression of p38 MAP kinase and GSTa2 in a hepatoma cell line

(-)-Cubebin is a lignan extracted from the seeds of the pepper Piper cubeba, a commonly eaten spice with beneficial properties, including trypanocidal, anti-inflammatory, analgesic, anti-proliferative and leishmanicidal activities. Because of its therapeutic potential, we investigated the effects of (-)-cubebin on the cytotoxicity, cell proliferation kinetics, mutagenicity and expression of p38 MAP kinase and glutathione S-transferase a2 (GSTa2) using real-time RT-PCR in Rattus norvegicus hepatoma cells. We found that 280 μM (-)-cubebin was cytotoxic after 24, 48 and 72. h of exposure, but not mutagenic at 0.28 μM, 2.8 μM and 28 μM after 26. h. Similarly, exposure to 0.28 μM, 2.8 μM and 28 μM (-)-cubebin for 24, 48, 72 and 96. h did not alter the cell proliferation kinetics. Cells exposed to 28 μM (-)-cubebin for 24. h did not exhibit changes in p38 MAP kinase and GSTa2 expression, indicating that cellular changes were not induced by extracellular stimuli and that (-)-cubebin is likely not metabolized via this pathway. Our results suggest that high levels of (-)-cubebin should be consumed with caution due to the cytotoxic effect observed at the highest concentration. However, at lower concentrations, no cytotoxic, mutagenic or proliferative effects were observed, providing further evidence of the safety of consuming (-)-cubebin. © 2013 Elsevier Inc.

Stable singularities of co-rank one quasi homogeneous map germs from (ℂn+1, 0) to (ℂn, 0), n = 2, 3

In this article, we investigate the geometry of quasi homogeneous corank one finitely determined map germs from (ℂn+1, 0) to (ℂn, 0) with n = 2, 3. We give a complete description, in terms of the weights and degrees, of the invariants that are associated to all stable singularities which appear in the discriminant of such map germs. The first class of invariants which we study are the isolated singularities, called 0-stable singularities because they are the 0-dimensional singularities. First, we give a formula to compute the number of An points which appear in any stable deformation of a quasi homogeneous co-rank one map germ from (ℂn+1, 0) to (ℂn, 0) with n = 2, 3. To get such a formula, we apply the Hilbert's syzygy theorem to determine the graded free resolution given by the syzygy modules of the associated iterated Jacobian ideal. Then we show how to obtain the other 0-stable singularities, these isolated singularities are formed by multiple points and here we use the relation among them and the Fitting ideals of the discriminant. For n = 2, there exists only the germ of double points set and for n = 3 there are the triple points, named points A1,1,1 and the normal crossing between a germ of a cuspidal edge and a germ of a plane, named A2,1. For n = 3, there appear also the one-dimensional singularities, which are of two types: germs of cuspidal edges or germs of double points curves. For these singularities, we show how to compute the polar multiplicities and also the local Euler obstruction at the origin in terms of the weights and degrees. © 2013 Pushpa Publishing House.

Automatic microstructural characterization and classification using artificial intelligence techniques on ultrasound signals

Secondary phases such as Laves and carbides are formed during the final solidification stages of nickel based superalloy coatings deposited during the gas tungsten arc welding cold wire process. However, when aged at high temperatures, other phases can precipitate in the microstructure, like the γ″ and δ phases. This work presents a new application and evaluation of artificial intelligent techniques to classify (the background echo and backscattered) ultrasound signals in order to characterize the microstructure of a Ni-based alloy thermally aged at 650 and 950 °C for 10, 100 and 200 h. The background echo and backscattered ultrasound signals were acquired using transducers with frequencies of 4 and 5 MHz. Thus with the use of features extraction techniques, i.e.; detrended fluctuation analysis and the Hurst method, the accuracy and speed in the classification of the secondary phases from ultrasound signals could be studied. The classifiers under study were the recent optimum-path forest (OPF) and the more traditional support vector machines and Bayesian. The experimental results revealed that the OPF classifier was the fastest and most reliable. In addition, the OPF classifier revealed to be a valid and adequate tool for microstructure characterization through ultrasound signals classification due to its speed, sensitivity, accuracy and reliability. © 2013 Elsevier B.V. All rights reserved.

Influence of the indium concentration on microstructural and electrical properties of proton conducting NiO-BaCe0.9-xIn xY0.1O3-δ cermet anodes for IT-SOFC application

Optimization of the major properties of anodes based on proton conductors, such as microstructure, conductivity and chemical stability, is yet to be achieved. In this study we investigated the influence of indium on the chemical stability, microstructural and electrical characteristics of proton conducting NiO-BaCe0.9-xInxY0.1O 3-δ (NiO-BCIYx) anodes. Four compositions of cermet anode substrates NiO-BCIYx were prepared using the method of evaporation and decomposition of solutions and suspensions (EDSS). Sintered anode substrates were reduced and their microstructural and electrical properties were examined before and after reduction as a function of the amount of indium. Anode substrates tested on chemical stability in the CO2 atmosphere showed high stability compared to anode substrates based on commonly used doped barium cerates. Microstructural properties of the anode pellets before and after testing in CO2 were investigated using X-ray diffraction analysis. Impedance spectroscopy measurements were used for evaluation of electrical properties of the anode pellets and the conductivity values of reduced anodes of more than 14 S cm-1 at 600 °C confirmed percolations through Ni particles. Under fuel cell operating conditions, the cell with a Ni-BCIY20 anode achieved the highest performance, demonstrating a peak power density 223 mW/cm2 at 700 °C confirming the functionality of Ni-BCIY anodes.© 2013 Elsevier B.V. All rights reserved.

The use of elevation map histograms for topographic heterogeneity analysis

Surface defects are extremely important in mechanical characterization of several different materials. Therefore, the analysis of surface finishing is essential for a further simulation of surface mechanical properties in a customized project in materials science and technology. One of the methods commonly employed for such purpose is the statistical mapping of different sample surface regions using the depth from focus technique. The analysis is usually performed directly from the elevation maps which are obtained from the digital image processing. In this paper, the possibility of quantifying the surface heterogeneity of Silicon Carbide porous ceramics by elevation map histograms is presented. The advantage of this technique is that it allows the qualitative or quantitative verification of all surface image fields that cannot be done by using the Surface Plot plugin of image J™ platform commonly used in digital image processing. © 2012 Springer Science+Business Media, LLC.

A rescaling of the phase space for Hamiltonian map: Applications on the Kepler map and mappings with diverging angles in the limit of vanishing action

A rescale of the phase space for a family of two-dimensional, nonlinear Hamiltonian mappings was made by using the location of the first invariant Kolmogorov-Arnold-Moser (KAM) curve. Average properties of the phase space are shown to be scaling invariant and with different scaling times. Specific values of the control parameters are used to recover the Kepler map and the mapping that describes a particle in a wave packet for the relativistic motion. The phase space observed shows a large chaotic sea surrounding periodic islands and limited by a set of invariant KAM curves whose position of the first of them depends on the control parameters. The transition from local to global chaos is used to estimate the position of the first invariant KAM curve, leading us to confirm that the chaotic sea is scaling invariant. The different scaling times are shown to be dependent on the initial conditions. The universality classes for the Kepler map and mappings with diverging angles in the limit of vanishing action are defined. © 2013 Published by Elsevier Inc. All rights reserved.

A high-resolution radiation hybrid map of the river buffalo major histocompatibility complex and comparison with BoLA

The major histocompatibility complex (MHC) in mammals codes for antigen-presenting proteins. For this reason, the MHC is of great importance for immune function and animal health. Previous studies revealed this gene-dense and polymorphic region in river buffalo to be on the short arm of chromosome 2, which is homologous to cattle chromosome 23. Using cattle-derived STS markers and a river buffalo radiation hybrid (RH) panel (BBURH5000), we generated a high-resolution RH map of the river buffalo MHC region. The buffalo MHC RH map (cR5000) was aligned with the cattle MHC RH map (cR 12000) to compare gene order. The buffalo MHC had similar organization to the cattle MHC, with class II genes distributed in two segments, class IIa and class IIb. Class IIa was closely associated with the class I and class III regions, and class IIb was a separate cluster. A total of 53 markers were distributed into two linkage groups based on a two-point LOD score threshold of ≥8. The first linkage group included 32 markers from class IIa, class I and class III. The second linkage group included 21 markers from class IIb. Bacterial artificial chromosome clones for seven loci were mapped by fluorescence in situ hybridization on metaphase chromosomes using single- and double-color hybridizations. The order of cytogenetically mapped markers in the region corroborated the physical order of markers obtained from the RH map and served as anchor points to align and orient the linkage groups. © 2012 The Authors, Animal Genetics © 2012 Stichting International Foundation for Animal Genetics.

Integrated assessment for establishing an oil environmental vulnerability map: Case study for the Santos Basin region, Brazil

The growth of maritime transport and oil exploitation activities may increase the risk of oil spills. Thus, plans and actions to prevent or mitigate impacts are needed to minimize the effects caused by oil. However, tools used worldwide to support contingency plans have not been integrated, thus leading to failure in establishing priority areas. This investigation aimed to develop indices of environmental vulnerability to oil (IEVO), by combining information about environmental sensibility to oil and results of numerical modeling of spilled oil. To achieve that, a case study concerning to oil spills scenarios in a subtropical coastal area was designed, and IEVOs were calculated and presented in maps, in order to make the information about the areas' vulnerability more easily visualized. For summer, the extension of coastline potentially affected by oil was approximately 150. km, and most of the coastline presented medium to high vulnerability. For winter, 230. km coastline would be affected, from which 75% were classified as medium to high vulnerability. Thus, IEVO maps allowed a rapid and clearer interpretation of the vulnerability of the mapped region, facilitating the planning process and the actions in response to an oil spill. © 2013 Elsevier Ltd.

Topological K-classification of finitely determined map germs

We consider smooth finitely C 0-K-determined map germs f: (ℝn, 0) → (ℝp, 0) and we look at the classification under C 0-K-equivalence. The main tool is the homotopy type of the link, which is obtained by intersecting the image of f with a small enough sphere centered at the origin. When f -1(0) = {0}, the link is a smooth map between spheres and f is C 0-K-equivalent to the cone of its link. When f -1(0) ≠ {0}, we consider a link diagram, which contains some extra information, but again f is C 0-K-equivalent to the generalized cone. As a consequence, we deduce some known results due to Nishimura (for n = p) or the first named author (for n < p). We also prove some new results of the same nature. © 2012 Springer Science+Business Media Dordrecht.

Road map towards the implementation of the United Nations Millennium Declaration: report of the Secretary-General

Includes bibliography