Organic-inorganic nanostructured multilayers for calcium phosphate biomineralization

The weak fixation of biomaterials within the bone structure is one of the major reasons of implants failures. Calcium phosphate (CaP) coatings are used in bone tissue engineering to improve implant osseointegration by enhancing cellular adhesion, proliferation and differentiation, leading to a tight and stable junction between implant and host bone. It has also been observed that materials compatible with bone tissue either have a CaP coating or develop such a calcified surface upon implantation. Thus, the development of bioactive coatings becomes essential for further improvement of integration with the surrounding tissue. However, most of current applied CaP coatings methods (e.g. physical vapor deposition), cannot be applied to complex shapes and porous implants, provide poor structural control over the coating and prevent incorporation of bioactive organic compounds (e.g. antibiotics, growth factors) because of the used harsh processing conditions. Layer-by-layer (LbL) is a versatile technology that permits the building-up of multilayered polyelectrolyte films in mild conditions based on the alternate adsorption of cationic and anionic elements that can integrate bioactive compounds. As it is recognized in natureâ s biomineralization process the presence of an organic template to induce mineral deposition, this work investigate a ion based biomimetic method where all the process is based on LbL methodology made of weak natural-origin polyelectrolytes. A nanostructured multilayer component, with 5 or 10 bilayers, was produced initially using chitosan and chondroitin sulphate polyelectrolyte biopolymers, which possess similarities with the extracellular matrix and good biocompatibility. The multilayers are then rinsed with a sequential passing of solutions containing Ca2+ and PO43- ions. The formation of CaP over the polyelectrolyte multilayers was confirmed by QCM-D, SEM and EDX. The outcomes show that 10 polyelectrolyte bilayer condition behaved as a  better site for initiating the formation of CaP as the precipitation occur at earlier stages than in 5 polyelectrolyte bilayers one. This denotes that higher number of bilayers could hold the CaP crystals more efficiently. This work achieved uniform coatings that can be applied to any surface with access to the liquid media in a low-temperature method, which potentiates the manufacture of effective bioactive biomaterials with great potential in orthopedic applications.

Degradation of all-inkjet-printed organic thin-film transistors with TIPS-pentacene under processes applied in textile manufacturing

Printed electronics represent an alternative solution for the manufacturing of low-temperature and large area flexible electronics. The use of inkjet printing is showing major advantages when compared to other established printing technologies such as, gravure, screen or offset printing, allowing the reduction of manufacturing costs due to its efficient material usage and the direct-writing approach without requirement of any masks. However, several technological restrictions for printed electronics can hinder its application potential, e.g. the device stability under atmospheric or even more stringent conditions. Here, we study the influence of specific mechanical, chemical, and temperature treatments usually appearing in manufacturing processes for textiles on the electrical performance of all-inkjet-printed organic thin-film transistors (OTFTs). Therefore, OTFTs where manufactured with silver electrodes, a UV curable dielectric, and 6,13-bis(triisopropylsilylethynyl) pentance (TIPS-pentacene) as the active semiconductor layer. All the layers were deposited using inkjet printing. After electrical characterization of the printed OTFTs, a simple encapsulation method was applied followed by the degradation study allowing a comparison of the electrical performance of treated and not treated OTFTs. Industrial calendering, dyeing, washing and stentering were selected as typical textile processes and treatment methods for the printed OTFTs. It is shown that the all-inkjet-printed OTFTs fabricated in this work are functional after their submission to the textiles processes but with degradation in the electrical performance, exhibiting higher degradation in the OTFTs with shorter channel lengths (L=10 μm).

Strain induced edge magnetism at zigzag edge of a graphene quantum dot

We study the temperature dependent magnetic susceptibility of a strained graphene quantum dot by using the determinant quantum Monte Carlo method. Within the Hubbard model on a honeycomb lattice, our unbiased numerical results show that a relative small interaction $U$ may lead to a edge ferromagnetic like behavior in the strained graphene quantum dot, and a possible room temperature transition is suggested. Around half filling, the ferromagnetic fluctuations at the zigzag edge is strengthened both markedly by the on-site Coulomb interaction and the strain, especially in low temperature region. The resultant strongly enhanced ferromagnetic like behavior may be important for the development of many applications.

A systematic study of the structural and magnetic properties of Mn-, Co-, and Ni-Doped Colloidal Fe3O4 nanoparticles

A series of colloidal MxFe3-xO4 (M = Mn, Co, Ni; x = 0–1) nanoparticles with diameters ranging from 6.8 to 11.6 nm was synthesized by hydrothermal reaction in aqueous medium at low temperature (200 °C). Energy-dispersive X-ray microa-nalysis and inductively coupled plasma spectrometry confirms that the actual elemental compositions agree well with the nominal ones. The structural properties of obtained nanoparticles were investigated by using powder X-ray diffraction, Raman scattering, Mössbauer spectroscopy, and electron microscopy. The results demonstrate that our synthesis technique leads to the formation of chemically uniform single-phase solid solution nanoparticles with cubic spinel structure, confirming the intrinsic doping. Magnetic studies showed that, in comparison to Fe3O4, the saturation magnetization of MxFe3-xO4 (M = Mn, Ni) decreases with increasing dopant concentration, while Co-doped samples showed similar saturation magnetizations. On other hand, whereas Mn- and Ni-doped nanoparticles exhibits superparamagnetic behavior at room temperature, ferromagnetism emerges for CoxFe3-xO4 nanoparticles, which can be tuned by the level of Co doping.

Optimization of magnetoelectric composites based on electroactive polymers for energy harvesting and sensor application

Tese de Doutoramento em Engenharia de Materiais.

Ocorrência de nematódeos do gênero Ditylenchus em tubérculos de batatinha no Est. de São Paulo

Irish potato tubers imported from Holland and Germany were planted at the Instituto Agronômico Experiment Station, Campinas, in April, 1955. At digging time, in July, 1955, the tubers were found to be injured by nematodes belonging to the genus Ditylenchus. No visible symptoms were found on the plants during the growing season, since the nematodes did not attack the stems. However, prevailing weather conditions from April to July were not favorable for nema activities, with low temperature and rain precipitation. Therefore, it does not seem safe to assume that, as a rule, the nemas do not attack buds and stems, for further observations may reveal such an occurrence, as it has been reported in the literature. The injury was characterized by spots consisting of decaying brown tissue, the nematodes being found mainly between this and the uninjured tissue. Larvae and adults occurred simultaneously. Fourteen different potato varieties were attacked by the nematodes, the percentage of disfigured tubers ranging from 6 (vars. Irene, Barima and Tedria) to 38 (var. Stamm 456). Studies en the morphology cf the parasites disclosed that two different Ditylenchus forms were present, with Apheten-chus sp. and Aphelenchoides sp. associated with them. The writers have not yet drawn a final conclusion about the identification of the Ditylenchi. However, it was clearly seen that no form can be identified either with D. dipsaci or with D. destructor. Both forms have lateral fields made up of 6 incisures, what separates them from D. dipsaci. On the other hand, measurements as well as some details in the organization of the oesophagus make the identification with D. destructor quite impossible. As far as the origin of the parasites is concerned, the fact that they could not be determined either as D. dipsaci or as D. destructor emphasizes the possibility of being two native species, not introduced with the tubers imported.

Influência lunar sobre plantas hortícolas

The aim of this paper is the study of moon effects on ten different crops divided in four groups: 1) salad and cole crops (lettuce, endive, cabbage, cauliflower); 2) root crops (beet, carrot, radish, turnip); 3) bulb crops (onion); 4) solanaceous fruits (eggplant). The design of the experiment was randomized blocks, with four replications, the different treatments being the four phases of the moon. The analyses of variance are given in the work of Simão (1953) and the analises of the mean in tables 1 to 2. The main conclusions are: 1) No difference in production were found related to different moon phases, even it the crops supposed to be sensible to moon effects. 2) In a few cases, where some increase in production was observed, such increase could be atributed by other apents 3) The agents supposed to interfere with increase in production were temperature and photoperiodism, rather than moon phases. 4) The most sensible crops to low temperature, during the night, were: lettuce, endive, cauliflower, cabbage, carrots, turnips and radish. 5) The most sensible crops to both low temperature and photoperiodism were: onion and beet. 6) The moon phases supposed to have opposed effects, namely full-moon and half-moon, gave mixed results sometimes both giving the best yield simultaneously and sometimes giving the poorest crops. 7) As a final conclusion, no moon effects could be detectable in the present experiment.

Temperatura, humidade e pluviosidade nas suas relações com doenças respiratórias, em cidades brasileiras

During the period 1940-44, deaths by respiratory diseases and particularly by influenza and pneumonias prevailed during the winter in brazilian cities of the temperate zone (S. Paulo, Curitiba, Porto Alegre) and, with the exception of Rio de Janeiro, in tropical ones (Belem, Recife, Salvador) particularly during the four-months period of highest absolute humidity. For the first group of cities, negative correlation coefficients, statistically significant, have been uniformly obtained comparing monthly death-rates both with temperature - in the same month and in the previous one (values of r ranging from - 0.36 to - 0.640 - and with similar humidity variations (values of r from - 0.33 to - 0.59); also with rainfall, but only in S. Paulo and Curitiba (values of r from - 0.33 to - 0.61). Such associations have been disclosed irregularly and less frequently for the group of tropical cities: statistically significant values of r, in the death-rates correlations with temperature and humidity variations, have been eventually either positive (Recife, Salvador) or negative (Belem, Rio). Whooping cough showed during the same period a winter incidence in Curitiba and Porto Alegre: the compulsory notification of the disease is not required in S. Paulo, a third one brazilian city of the temperate zone. In the brazilian tropical cities of Belem, Recife, Salvador and Rio, the whooping cough distribution by four-months periods - selected in accordance with the highest or lowest values of rainfall, mean temperature and absolute humidity - induced to suppose that the disease was associated more uniformly with a high rainfall than with a low temperature or a low absolute humidity. However, only a few correlation coefficients statistically significant have been found out: between monthly morbidity rates and mean humidity in the same month and in the previous one in recife (-0.43 and - 0.39), and in Porto Alegre (-0.35 and - 0.46); and between the same rates and temperature variations in this last city (-0.28 and - 0.43).

Contribution to the study of immune hemolysis by toad complement

EA (sheep erythrocytes carrying rabbit antibody) are lysed by toad complement under optimal conditions which include a low concentration of cells (1.54 x 10*8/ml), a low temperature of incubation (30°C) and the same amounts of Ca++ and Mg++ as required for the titration of guinea-pig complement. Kinetic studies of the role of cations mentioned above in immune lysis by toad C have disclosed a fundamental difference as compared to guinea-pig C. In a limited complement system, the lysis by amphibian C is completely blocked by EDTA, even when the chelating agent is added as late as 15 minutes after zero-time. Inhibition by EGTA is only partial and the findings suggest that Mg++ is required not only at the beginning, but also at late stages of the lytic process. It has been speculated that the activation of amphibian complement proceeds mainly by the alternative pathway.

Estudi de tecnologies a través de ressonadors acoblats per a la síntesi de filtres

Aquest treball és un estudi de viabilitat sobre una tecnologia, actualment molt desenvolupada i de baix cost, per a la implementació de circuits de microones anomenada LTCC (Low Temperature Cofired Ceramic), i que permet, entre altres coses, la implementació i miniaturització dels dissenys de circuits de RF i microones gràcies als processos de fabricació i als materials que empra. S’ha comparat aquesta tecnologia, que està a l’abast de la UAB ja que s’utilitza en el departament de química, amb la tecnologia utilitzada en el departament d’electrònica de la UAB, i que es basa en un substrat anomenat Rogers3010. Les característiques electromagnètiques d’uns i altres materials, i les limitacions tecnològiques i de fabricació d’ambdues tecnologies han sigut la base d’aquest estudi.

Quantifying rates of landscape evolution and tectonic processes by thermochronology and numerical modeling of crustal heat transport using PECUBE

PECUBE is a three-dimensional thermal-kinematic code capable of solving the heat production-diffusion-advection equation under a temporally varying surface boundary condition. It was initially developed to assess the effects of time-varying surface topography (relief) on low-temperature thermochronological datasets. Thermochronometric ages are predicted by tracking the time-temperature histories of rock-particles ending up at the surface and by combining these with various age-prediction models. In the decade since its inception, the PECUBE code has been under continuous development as its use became wider and addressed different tectonic-geomorphic problems. This paper describes several major recent improvements in the code, including its integration with an inverse-modeling package based on the Neighborhood Algorithm, the incorporation of fault-controlled kinematics, several different ways to address topographic and drainage change through time, the ability to predict subsurface (tunnel or borehole) data, prediction of detrital thermochronology data and a method to compare these with observations, and the coupling with landscape-evolution (or surface-process) models. Each new development is described together with one or several applications, so that the reader and potential user can clearly assess and make use of the capabilities of PECUBE. We end with describing some developments that are currently underway or should take place in the foreseeable future. (C) 2012 Elsevier B.V. All rights reserved.

On the mechanism of protective action of cold acclimatization against carbon tetrachloride - and ethionine-induced fatty liver

In this study the hepatic lipoprotein lipase (LPL), activity was evaluated in adult female mice acclimatized at 5-C and submitted to carbon tetrachloride (CCI) or ethionine, in order to determine the possible role of this enzuyme in the fatty liver. The results were compared with those obtained in mice kept at room temperature (27-C) that the same hepatoesteatosis inducing agent. In contrast to animals kept at room temperature, in cold aclimatized mice neither the enhancement of the LPL-liver activity by the action of CCI or ethionine occurred nor the development of fatty infiltration in the liver was observed. We conclude that the low temperature induced a protective effect against CCI or ethionine-induced fatty liver that was correlated with the no-increase of the hepatic LPL activity.

40Ar/39Ar dating of Penninic Front tectonic displacement (W Alps) during the Lower Oligocene (31-34 Ma)

Direct absolute dating of the Penninic Frontal Thrust tectonic motion is achieved using the Ar-40/Ar-39 technique in the Pelvoux Crystalline Massif (Western Alps). The dated phengites were formed syn-kinematically in shear zones. They underline the brittle-ductile stretching lineation, pressure-shadow fibres and slickensides consistent with underthrusting of the European continental slab below the propagating Penninic Thrust. Chlorite-phengite thermobarometry yields 10-15 km and T similar to 280 degrees C, while Ar-40/Ar-39 phengite ages mainly range between 34 and 30 Ma, with one younger age at 27 Ma. This Early Oligocene age range matches a major tectonic rearrangement of the Alpine chain. Preservation of prograde Ar-40/Ar-39 ages is ascribed to passive exhumation of the Pelvoux shear zone network, sandwiched between more external thrusts and the Penninic Front reactivated as an E-dipping detachment fault. Partial resetting in the Low Temperature part of argon spectra below 24 Ma is ascribed to brittle deformation and alteration of phengites.

Hydrocarbon biomarkers in the Topla-Mezica zinc-lead deposits, northern Karavanke/Drau Range, Slovenia: Paleoenvironment at the site of ore formation

The Mississippi Valley-type zinc and lead deposits at Topla (250,150 metric tons (t) of ore grading 1.0 wt % Zn and 3.3 wt % Pb) and Mezica (19 million metric tons (Mt) of ore grading 5.3 wt % Pb and 2.7 wt % Zn) occur within the Middle to Upper Triassic platform carbonate rocks of the northern Karavanke/Drau Range geotectonic units of the Eastern Alps, Slovenia. The ore and host rocks of these deposits have been investigated by a combination of inorganic and organic geochemical methods to determine major, trace, and rare earth element (REE) concentrations, hydrocarbon distribution, and stable isotope ratios of carbonates, kerogen, extractable organic matter, and individual hydrocarbons. These data combined with sedimentological evidence provide insight into the paleoenvironmental conditions at the site of ore formation. The carbonate isotope composition, the REE patterns, and the distribution of hydrocarbon biomarkers (normal alkanes and steranes) suggest a marine depositional environment. At Topla, a relatively high concentration of redox sensitive trace elements (V, Mo, U) in the host dolostones and REE patterns parallel to that of the North American shale composite suggest that sediments were deposited in a reducing environment. Anoxic conditions enhanced the preservation of organic matter and resulted in relatively higher total organic carbon contents (up to 0.4 wt %). The isotopic composition of the kerogen (delta C-13(kerogon) = -29.4 to -25.0 parts per thousand, delta N-15(kerogen) = -.13.6 to 6.8 parts per thousand) suggests that marine algae and/or bacteria were the main source of organic carbon with a very minor contribution from detrital continental plants and a varying degree of alteration. Extractable organic matter from Topla ore is generally depleted in C-13 compared to the associated kerogen, which is consistent with an indigenous source of the bitumens. The mineralization correlates with delta N-15(kerogen) values around 0 per mil, C-13 depleted kerogen, C-13 enriched n-heptadecane, and relatively high concentrations of bacteria] hydrocarbon biomarkers, indicating a high cyanobacterial biomass at the site of ore formation. Abundant dissimilatory sulfate-reducing bacteria, feeding on the cyanobacterial remains, led to accumulation of biogenic H2S in the pore water of the sediments. This biogenic H2S was mainly incorporated into sedimentary organic matter and diagenetic pyrite. Higher bacterial activity at the ore site also is indicated by specific concentration ratios of hydrocarbons, which are roughly correlated with total Pb plus Zn contents. This correlation is consistent with mixing of hydrothermal metal-rich, fluids and local bacteriogenic sulfide sulfur. The new geochemical data provide supporting evidence that Topla is a low-temperature Mississippi Valley-type deposit formed in an anoxic supratidal saline to hypersaline environment. A laminated cyanobacterial mat, with abundant sulfate-reducing bacteria was the main site of sulfate reduction.

Normal hepatic glucose production in the absence of GLUT2 reveals an alternative pathway for glucose release from hepatocytes.

Glucose production by liver is a major physiological function, which is required to prevent development of hypoglycemia in the postprandial and fasted states. The mechanism of glucose release from hepatocytes has not been studied in detail but was assumed instead to depend on facilitated diffusion through the glucose transporter GLUT2. Here, we demonstrate that in the absence of GLUT2 no other transporter isoforms were overexpressed in liver and only marginally significant facilitated diffusion across the hepatocyte plasma membrane was detectable. However, the rate of hepatic glucose output was normal. This was evidenced by (i) the hyperglycemic response to i.p. glucagon injection; (ii) the in vivo measurement of glucose turnover rate; and (iii) the rate of release of neosynthesized glucose from isolated hepatocytes. These observations therefore indicated the existence of an alternative pathway for hepatic glucose output. Using a [14C]-pyruvate pulse-labeling protocol to quantitate neosynthesis and release of [14C]glucose, we demonstrated that this pathway was sensitive to low temperature (12 degreesC). It was not inhibited by cytochalasin B nor by the intracellular traffic inhibitors brefeldin A and monensin but was blocked by progesterone, an inhibitor of cholesterol and caveolae traffic from the endoplasmic reticulum to the plasma membrane. Our observations thus demonstrate that hepatic glucose release does not require the presence of GLUT2 nor of any plasma membrane glucose facilitative diffusion mechanism. This implies the existence of an as yet unsuspected pathway for glucose release that may be based on a membrane traffic mechanism.