On the stability of the optimal value and the optimal set in optimization problems

The paper develops a stability theory for the optimal value and the optimal set mapping of optimization problems posed in a Banach space. The problems considered in this paper have an arbitrary number of inequality constraints involving lower semicontinuous (not necessarily convex) functions and one closed abstract constraint set. The considered perturbations lead to problems of the same type as the nominal one (with the same space of variables and the same number of constraints), where the abstract constraint set can also be perturbed. The spaces of functions involved in the problems (objective and constraints) are equipped with the metric of the uniform convergence on the bounded sets, meanwhile in the space of closed sets we consider, coherently, the Attouch-Wets topology. The paper examines, in a unified way, the lower and upper semicontinuity of the optimal value function, and the closedness, lower and upper semicontinuity (in the sense of Berge) of the optimal set mapping. This paper can be seen as a second part of the stability theory presented in [17], where we studied the stability of the feasible set mapping (completed here with the analysis of the Lipschitz-like property).

Assessing the value of CAN-gene mutations using MALDI-TOF MS.

PURPOSE: To identify cancer-linked genes, Sjöblom et al. and Wood et al. performed a genome-wide mutation screening in human breast and colorectal cancers. 140 CAN-genes were found in breast cancer, which in turn contained overall 334 mutations. These mutations could prove useful for diagnostic and therapeutic purposes. METHODS: We used a MALDI-TOF MS 40-plex assay for testing 40 loci within 21 high-ranking breast cancer CAN-genes. To confirm mutations, we performed single-plex assays and sequencing. RESULTS: In general, the mutation rate of the analyzed loci in our sample cohort was very low. No mutation from the 40 loci analyzed could be found in the 6 cell lines. In tissue samples, a single breast cancer tissue sample showed heterozygosity at locus c.5834G>A within the ZFYVE26 gene (Zinc finger FYVE domain-containing gene 26). CONCLUSIONS: Sjöblom et al./Wood et al. already showed that the vast majority of CAN-genes are mutated at very low frequency. Due to the fact that we only found one mutation in our cohort, we therefore assume that at the selected loci, mutations might be low-frequency events and therefore, more rarely detectable. However, further evaluation of the CAN-gene mutations in larger cohorts should be the aim of further studies.

Predictive value of the acid fast smear for detection of Mycobacterium tuberculosis in respiratory specimens in a Reference Center of HIV/Aids in Rio de Janeiro, Brazil

In order to evaluate the predictive value of acid fast bacilii (AFB) smear for the diagnosis of Mycobacterium tuberculosis in respiratory specimens in a setting with a high prevalence of Aids and an unknown prevalence of nontuberculous mycobacteria (NTM), we retrospectively examined specimens cultured for mycobacteria between 1 September 1993 and 30 September 1994 and medical records of patients with positive culture in a General Hospital, Aids reference in Rio de Janeiro, Brazil. Seventy three per cent (1517/2077) of samples were respiratory specimens and mycobacteria were recovered from 20.6% (313/1517) of these. M. tuberculosis was identified in 94.2% (295/313) and NTM in 5.8% (18/313). The yield of positive AFB smear and of positive culture was 6.1% (93/1517) and 20.6% (313/1517), respectively. The positive predictive value (PPV) of AFB for M. tuberculosis was 98.4% in expectorated sputum and 96.4% in bronchoalveolar lavage. Forty four percent (130/295) of specimens with positive culture for M. tuberculosis and 66.7% (12/18) for NTM were from patients HIV positive. The conclusion was that in our study population, the PPV of AFB for M. tuberculosis in respiratory specimens was high and the prevalence of NTM was low despite the high prevalence of HIV positive.

Digestibility of palm seeds and bruchids larvae by Neotropical rodents

Vertebrates show different tendencies in regard to their preference for seeds or fruits infested by insects compared to non-infested ones. Behaviour may include rejection of one type, preferential consumption of one type or no differentiation among them. When comparing infested versus non-infested fruits, most studies have focused on energy content and nutritional components of the food items; but the energy input provided to the consumer is a better measure for the comparison of the value of each type of food. In this study, I calculated the energy assimilated by rodents for the seeds of the palm Attalea butyracea contained in non-infested endocarps and from bruchid beetle larvae contained in infested endocarps. Using the energy assimilation and time of handling by rodents for both types of endocarps, I quantitatively demonstrated that both infested and non-infested endocarps produce a similar energy input. This finding is consistent with the previous hypothesis that there is a trade-off between the energy content and the time required to extract the insect larvae compared with the seeds in endocarps of Attalea butyracea.

Pork Value Chains: A Comparison of Catalonia, Spain and Manitoba, Canada

The purpose of this paper is to provide a comparative analysis of pork value chains in Catalonia, Spain and Manitoba, Canada. Intensive hog production models were implemented in Catalonia in the 1960s as a result of agriculture crises and fostered by feedstuffs factories. The expansion of the hog sector in Manitoba is more recent (in the 1990s) and brought about in large part by the opening of the Maple Leaf Meats processing plant in Brandon, Manitoba. This plant is capable of processing 90,000 hogs per week. Both hog production models ‐ the ‘older’ one in Catalonia (Spain) and the ‘newer’ in Manitoba‐ have been, until recently, examples of success. Inventories and production have been increasing substantially and both regions have proven to have great export potential. Recently, however, tensions have been developing with the hog production models of both regions, particularly as they relate to environmental concerns. The purpose of the paper is to compare the value chains with respect to their origins (e.g. supply a growing demand for pork, ensure farm profitability) and present states (e.g. environmental concerns, profitability). Keywords: pork value chain, hog farms, agri‐food studies. JEL: Q10, Q13, O57

Quantitative integration of geophysical and hydraulic data : from the local towards the regional scale range

Des progrès significatifs ont été réalisés dans le domaine de l'intégration quantitative des données géophysique et hydrologique l'échelle locale. Cependant, l'extension à de plus grandes échelles des approches correspondantes constitue encore un défi majeur. Il est néanmoins extrêmement important de relever ce défi pour développer des modèles fiables de flux des eaux souterraines et de transport de contaminant. Pour résoudre ce problème, j'ai développé une technique d'intégration des données hydrogéophysiques basée sur une procédure bayésienne de simulation séquentielle en deux étapes. Cette procédure vise des problèmes à plus grande échelle. L'objectif est de simuler la distribution d'un paramètre hydraulique cible à partir, d'une part, de mesures d'un paramètre géophysique pertinent qui couvrent l'espace de manière exhaustive, mais avec une faible résolution (spatiale) et, d'autre part, de mesures locales de très haute résolution des mêmes paramètres géophysique et hydraulique. Pour cela, mon algorithme lie dans un premier temps les données géophysiques de faible et de haute résolution à travers une procédure de réduction déchelle. Les données géophysiques régionales réduites sont ensuite reliées au champ du paramètre hydraulique à haute résolution. J'illustre d'abord l'application de cette nouvelle approche dintégration des données à une base de données synthétiques réaliste. Celle-ci est constituée de mesures de conductivité hydraulique et électrique de haute résolution réalisées dans les mêmes forages ainsi que destimations des conductivités électriques obtenues à partir de mesures de tomographic de résistivité électrique (ERT) sur l'ensemble de l'espace. Ces dernières mesures ont une faible résolution spatiale. La viabilité globale de cette méthode est testée en effectuant les simulations de flux et de transport au travers du modèle original du champ de conductivité hydraulique ainsi que du modèle simulé. Les simulations sont alors comparées. Les résultats obtenus indiquent que la procédure dintégration des données proposée permet d'obtenir des estimations de la conductivité en adéquation avec la structure à grande échelle ainsi que des predictions fiables des caractéristiques de transports sur des distances de moyenne à grande échelle. Les résultats correspondant au scénario de terrain indiquent que l'approche d'intégration des données nouvellement mise au point est capable d'appréhender correctement les hétérogénéitées à petite échelle aussi bien que les tendances à gande échelle du champ hydraulique prévalent. Les résultats montrent également une flexibilté remarquable et une robustesse de cette nouvelle approche dintégration des données. De ce fait, elle est susceptible d'être appliquée à un large éventail de données géophysiques et hydrologiques, à toutes les gammes déchelles. Dans la deuxième partie de ma thèse, j'évalue en détail la viabilité du réechantillonnage geostatique séquentiel comme mécanisme de proposition pour les méthodes Markov Chain Monte Carlo (MCMC) appliquées à des probmes inverses géophysiques et hydrologiques de grande dimension . L'objectif est de permettre une quantification plus précise et plus réaliste des incertitudes associées aux modèles obtenus. En considérant une série dexemples de tomographic radar puits à puits, j'étudie deux classes de stratégies de rééchantillonnage spatial en considérant leur habilité à générer efficacement et précisément des réalisations de la distribution postérieure bayésienne. Les résultats obtenus montrent que, malgré sa popularité, le réechantillonnage séquentiel est plutôt inefficace à générer des échantillons postérieurs indépendants pour des études de cas synthétiques réalistes, notamment pour le cas assez communs et importants où il existe de fortes corrélations spatiales entre le modèle et les paramètres. Pour résoudre ce problème, j'ai développé un nouvelle approche de perturbation basée sur une déformation progressive. Cette approche est flexible en ce qui concerne le nombre de paramètres du modèle et lintensité de la perturbation. Par rapport au rééchantillonage séquentiel, cette nouvelle approche s'avère être très efficace pour diminuer le nombre requis d'itérations pour générer des échantillons indépendants à partir de la distribution postérieure bayésienne. - Significant progress has been made with regard to the quantitative integration of geophysical and hydrological data at the local scale. However, extending corresponding approaches beyond the local scale still represents a major challenge, yet is critically important for the development of reliable groundwater flow and contaminant transport models. To address this issue, I have developed a hydrogeophysical data integration technique based on a two-step Bayesian sequential simulation procedure that is specifically targeted towards larger-scale problems. The objective is to simulate the distribution of a target hydraulic parameter based on spatially exhaustive, but poorly resolved, measurements of a pertinent geophysical parameter and locally highly resolved, but spatially sparse, measurements of the considered geophysical and hydraulic parameters. To this end, my algorithm links the low- and high-resolution geophysical data via a downscaling procedure before relating the downscaled regional-scale geophysical data to the high-resolution hydraulic parameter field. I first illustrate the application of this novel data integration approach to a realistic synthetic database consisting of collocated high-resolution borehole measurements of the hydraulic and electrical conductivities and spatially exhaustive, low-resolution electrical conductivity estimates obtained from electrical resistivity tomography (ERT). The overall viability of this method is tested and verified by performing and comparing flow and transport simulations through the original and simulated hydraulic conductivity fields. The corresponding results indicate that the proposed data integration procedure does indeed allow for obtaining faithful estimates of the larger-scale hydraulic conductivity structure and reliable predictions of the transport characteristics over medium- to regional-scale distances. The approach is then applied to a corresponding field scenario consisting of collocated high- resolution measurements of the electrical conductivity, as measured using a cone penetrometer testing (CPT) system, and the hydraulic conductivity, as estimated from electromagnetic flowmeter and slug test measurements, in combination with spatially exhaustive low-resolution electrical conductivity estimates obtained from surface-based electrical resistivity tomography (ERT). The corresponding results indicate that the newly developed data integration approach is indeed capable of adequately capturing both the small-scale heterogeneity as well as the larger-scale trend of the prevailing hydraulic conductivity field. The results also indicate that this novel data integration approach is remarkably flexible and robust and hence can be expected to be applicable to a wide range of geophysical and hydrological data at all scale ranges. In the second part of my thesis, I evaluate in detail the viability of sequential geostatistical resampling as a proposal mechanism for Markov Chain Monte Carlo (MCMC) methods applied to high-dimensional geophysical and hydrological inverse problems in order to allow for a more accurate and realistic quantification of the uncertainty associated with the thus inferred models. Focusing on a series of pertinent crosshole georadar tomographic examples, I investigated two classes of geostatistical resampling strategies with regard to their ability to efficiently and accurately generate independent realizations from the Bayesian posterior distribution. The corresponding results indicate that, despite its popularity, sequential resampling is rather inefficient at drawing independent posterior samples for realistic synthetic case studies, notably for the practically common and important scenario of pronounced spatial correlation between model parameters. To address this issue, I have developed a new gradual-deformation-based perturbation approach, which is flexible with regard to the number of model parameters as well as the perturbation strength. Compared to sequential resampling, this newly proposed approach was proven to be highly effective in decreasing the number of iterations required for drawing independent samples from the Bayesian posterior distribution.

Assessing multiple sclerosis activity: is the in vitro production of tumor necrosis factor-alpha, interleukins 2, 6, 4, and 10, and immunoglobulin G of value?

Tumor necrosis factor (TNF) alpha, interleukins (IL) 2, 4, 6, and 10, and IgG oligoclonal bands (IgG OB) in vitro production was assessed, after whole-blood stimulation with lipopolysaccharide or concanavalin A, in 61 patients presenting with relapsing-remitting, relapsing-progressive, or chronic progressive multiple sclerosis. Multiple sclerosis patients were receiving no treatment or azathioprine (AZA), cyclosporin, cyclophosphamide, subcutaneous interferon (IFN) beta 1 a, or corticosteroids (CST). Statistical correlations significantly showed that: (a) AZA lowers TNF-alpha (P = 0.002) and increases IL-4 production (P = 0.0024), and IFN-beta 1 a increases TNF-alpha and decreases IL-4 levels; (b) CST has a negative effect on TNF-alpha, IL-6, and IL-4 synthesis; and (c) AZA, IFN-beta 1 a, and CST diminish IgG OB synthesis (P = 0.001). Although our study of the dynamics of TNF-alpha, IL-2, IL-4, IL-6, and IL-10 in vitro production generally found no statistically significant correlations (partly explained by the limited number of values in the various groups), IL-6 was shown to drop during the periods surrounding relapse (P = 0.05) in the absence of treatment, while TNF-alpha (P = 0.04) and IL-6 (P < 0.05) dropped before exacerbation in the presence of AZA. In vitro production of TNF-alpha was closely and positively correlated with that of IL-6, independently of clinical features. The enhanced production of IL-10 detected before or at relapse with AZA and IFN-beta 1 a (trends) may interfere with initiation of the immune reaction and with the development of new CNS lesions. Some discrepancies with previously published results stress the difficulties in studying the state of stimulation of different populations of leukocytes by using a variety of in vitro stimuli and in establishing a correlation between mRNA studies and the amount of final or active protein produced.

Construcción de un modelo Multi- Regional Input-Output (MRIO) medioambiental para Cataluña y el resto de España: Estudio del balance en CO2 incorporado en el comercio

El objetivo de este estudio es analizar el impacto, en emisiones de CO2, de la demanda final de Cataluña en relación a los vínculos comerciales interregionales con el resto de España y el resto del mundo. Este proceso implica el análisis del balance en CO2 incorporado para Cataluña, lo que permitirá evaluar la responsabilidad de la economía catalana respecto a estas emisiones. Para este propósito se construye, para esta determinada desagregación regional, un modelo Multi-Regional Input-Output (MRIO) extendido al medioambiente con sectores verticalmente integrados. La incorporación de la técnica de la integración vertical nos permite un enfoque alternativo para el Balance Neto y un análisis más detallado de los vínculos interregionales entre los diversos sectores productivos, centrado en la responsabilidad última de la demanda final de cada sector en cada región. Hasta el momento, los estudios previos sobre los impactos medioambientales incorporados al comercio español se han centrado principalmente en el ámbito nacional. No obstante, por un lado el comercio interregional con el resto de España en términos monetarios representa cerca de la mitad del comercio exterior catalán. Por otro lado, los distintos metabolismos energéticos de ambas economías tienen como consecuencia una importante diferencia en la intensidad de emisión en la producción de bienes y servicios. Esta situación genera para Cataluña un déficit en el Balance Neto estimado con el resto de España, aún teniendo un importante superávit monetario. De esto se desprende la importancia de integrar el nivel interregional en los estudios de los impactos medioambientales incorporados en el comercio y, en consecuencia, en la planificación y formalización de políticas económicas y ambientales a nivel nacional.

Audit of the Irish health system for value for money

In April 2000, Deloitte & Touche in conjunction with the York Health Economics Consortium were chosen by The Department of Health & Children to carry out an examination of the health services over the past ten years Download the Report here

Straightening out the concept of direct and indirect input requirements

Gim & Kim (1998) proposed a generalization of Jeong (1982, 1984) reinterpretation of the Hawkins-Simon condition for macroeconomic stability to off-diagonal matrix elements. This generalization is conceptually relevant for it offers a complementary view of interindustry linkages beyond final or net output influence. The extension is completely similar to the 'total flow' idea introduced by Szyrmer (1992) or the 'output-to-output' multiplier of Miller & Blair (2009). However the practical implementation of Gim & Kim is actually faulty since it confuses the appropriate order of output normalization. We provide a new and elementary solution for the correct formalization using standard interindustry accounting concepts.

Value for Money Report - The Efficiency and Effectiveness of Long-Stay Residential Care for Adults within the Mental Health Services

Value for Money Report – The Efficiency and Effectiveness of Long-Stay Residential Care for Adults within the Mental Health Services Executive Summary and Contents PDF 164kb Chapters 1 and 2 – Introduction and Service Objectives PDF 504kb Chapter 3 plus annexes – Service Effectiveness and Efficiency PDF 3.7mb Chapter 4 – Service Resources PDF 2.4mb Chapters 5, 6 and 7 – Future Funding and Alternative Approaches, Key Performance Indicators, Conclusions and Recommendations PDF 2.4mb Appendices 1 to 6

Value for Money and Policy Review of Disability Services in Ireland - National Implementation Framework

The National Implementation Framework describes how the recommendations from the Value for Money (VFM) and Policy Review of the Disability Services Programme will be translated into concrete actions. It assigns responsibilities for those actions, and specifies timelines for their completion. It also identifies priorities and key performance indicators. The Framework describes how these reforms can be achieved in a planned, timely and cost effective manner. Click here to download (PDF 876KB)

Value for Money and Policy Review of the Economic Cost and Charges Associated with Private and Semi-Private Treatment Services in Public Hospitals - Final Report

This Value for Money and Policy Review (VFM&PR) of the Economic Cost and Charges Associated with Private and Semi-Private Treatment Services in Public Hospitals was initiated by the Department of Health and Children in June 2009 and was conducted under the auspices of the Governmentâ?Ts Value for Money & Policy Review Initiative 2009-2011. The Review was overseen by an independently chaired National Steering Group comprised of senior representatives from the Department of Health and Children, the Department of Finance, and the Health Service Executive (HSE). Download document here Download Explanatory Note