Flux-assisted self-assembly of monodisperse colloids

We have developed a novel method to grow ordered layers of monodisperse colloids on a flat substrate. The evaporation of the colloidal suspension in the presence of the inclined substrate is strengthened by an external gas flux directed on the meniscus. The meniscus oscillations caused by the gas flux have an evident effect on the ordering of the spheres on the substrate. Thick films (more than 150 layers in a single-step deposition) of large area single crystals (1 cm2) can be obtained in a very short time (~1 cm/h maximum growth rate) and from very diluted suspensions (up to 0.022% volume fraction).

Effect of posture on high-intensity constant-load cycling performance in men and women

The time sustained during a graded cycle exercise is ~10% longer in an upright compared with a supine posture. However, during constant-load cycling this effect is unknown. Therefore, we tested the postural effect on the performance of high-intensity constant-load cycling. Twenty-two active subjects (11 men, 11 women) performed two graded tests (one upright, one supine), and of those 22, 10 subjects (5 men, 5 women) performed three high-intensity constant-load tests (one upright, two supine). To test the postural effect on performance at the same absolute intensity, during the upright and one of the supine constant-load tests subjects cycled at 80% of the peak power output achieved during the upright graded test. To test the postural effect on performance at the same relative intensities, during the second supine test subjects cycled at 80% of the peak power output achieved during the supine graded test. Exercise time on the graded and absolute intensity constant-load tests for all subjects was greater (P<0.05) in the upright compared with supine posture (17.9±3.5 vs. 16.1±3.1 min for graded; 13.2±8.7 vs. 5.2±1.9 min for constant-load). This postural effect at the same absolute intensity was larger in men (19.4±8.5 upright vs. 6.6±1.6 supine, P<0.001) than women (7.1±2 upright vs. 3.9±1.4 supine, P>0.05) and it was correlated (P<0.05) with both the difference in VO₂ between positions during the first minute of exercise (r=0.67) and the height of the subjects (r=0.72). In conclusion, there is a very large postural effect on performance during constant-load cycling exercise and this effect is significantly larger in men than women.

Pacing strategy and high-intensity cycling performance

This thesis found that a brief maximal acceleration, followed by a steady effort thereafter is the most effective pacing strategy for intense, short-term cycling performance. This strategy leads to an increase in aerobic energy supply early in exercise, which contributes to a faster speed throughout the race.

Re-cycling carbon dioxide into fuel-like hydrocarbons by photocatalytic process

A new approach of heterogenous photocatalysis using titanium dioxide pellets was explored. It was found to be attractive for use in photocatalytic reduction of carbon dioxide with wavelength and temperature being crucial factors. The study also proposes a kinetic modelling for the process to simulate the product-yield profile.

Nutrient cycling in Lagoon of Islands, Tasmania : management to control

This research identified the causes of poor water quality and algal blooms in Lagoon of Islands, a small shallow lake in Tasmania. The findings of this research identified options for rehabilitation and remediation of the lake.

Effects of starting strategy on 5-min cycling time-trial performance

The importance of pacing for middle-distance performance is well recognized, yet previous research has produced equivocal results. Twenty-six trained male cyclists ( V O_2peak 62.8+5.9 ml ·kg^-1 · min^-1· maximal aerobic power output 340+43 W; mean+s) performed three cycling time-trials where the total external work (102.7+13.7 kJ) for each trial was identical to the best of two 5-min habituation trials. Markers of aerobic and anaerobic metabolism were assessed in 12 participants. Power output during the first quarter of the time-trials was fixed to control external mechanical work done (25.7+3.4 kJ) and induce fast-, even-, and slow-starting strategies (60, 75, and 90 s, respectively). Finishing times for the fast-start time-trial (4:53+0:11 min:s) were shorter than for the even-start (5:04+0:11 min:s; 95% CI=5 to 18 s, effect size=0.65, P 50.001) and slow-start time-trial (5:09+0:11 min:s; 95% CI=7 to 24 s, effect size=1.00, P 50.001). Mean VO₂ during the fast-start trials (4.31+0.51 litres · min^-1) was 0.18+0.19 litres · min^-1 (95% CI=0.07 to 0.30 litres · min^-1, effect size=0.94, P =0.003) higher than the even- and 0.18+0.20 litres · min^-1 (95% CI=0.5 to 0.30 litres · min^-1, effect size=0.86, P =0.007) higher than the slow-start time-trial. Oxygen deficit was greatest during the first quarter of the fast-start trial but was lower than the even- and slow-start trials during the second quarter of the trial. Blood lactate and pH were similar between the three trials. In conclusion, performance during a 5-min cycling time-trial was improved with the adoption of a fast- rather than an even- or slow-starting strategy.

Effect of organic additives on the cycling performances of lithium metal polymer cells

Gel polymer electrolytes were prepared by immersing a porous poly(vinylidene fluoride-co-hexafluoropropylene) membrane in an electrolyte solution containing small amounts of organic additive. Three kinds of organic compounds, thiophene, 3,4-ethylenedioxythiophene and biphenyl, were used as a polymerizable monomeric additive. The organic additives were found to be electrochemically oxidized to form conductive polymer films on the electrode at high potential. By using the gel polymer electrolytes containing different organic additive, lithium metal polymer cells, composed of lithium anode and LiCoO2 cathode, were assembled and their cycling performance evaluated. Adding small amounts of a suitable polymerizable additive to the gel polymer electrolyte was found to reduce the interfacial resistance in the cell during cycling, and it thus exhibited less capacity fade and better high rate performance. Differential scanning calorimetric studies showed that the thermal stability of the fully charged LiCoO2 cathode was improved in the cell containing an organic additive.

Cycling performance of lithium metal polymer cells assembled with ionic liquid and poly(3-methyl thiophene)/carbon nanotube composite cathode

A poly(3-methylthiophene) (PMT)/multi-walled carbon nanotube (CNT) composite is synthesized by in situ chemical polymerization. The PMT/CNT composite is used as an active cathode material in lithium metal polymer cells assembled with ionic liquid (IL) electrolytes. The IL electrolyte consists of 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIBF4) and LiBF4. A small amount of vinylene carbonate is added to the IL electrolyte to prevent the reductive decomposition of the imidazolium cation in EMIBF4. A porous poly(vinylidene fluoride-co-hexafluoropropylene) (P(VdF-co-HFP)) film is used as a polymer membrane for assembling the cells. Electrochemical properties of the PMT/CNT composite electrode in the IL electrolyte are evaluated and the effect of vinylene carbonate on the cycling performance of the lithium metal polymer cells is investigated. The cells assembled with a non-flammable IL electrolyte and a PMT/CNT composite cathode are promising candidates for high-voltage–power sources with enhanced safety.

Effect of body tilt angle on fatigue and EMG activities in lower limbs during cycling

This study compared the rate of fatigue and lower limb EMG activities during high-intensity constantload cycling in upright and supine postures. Eleven active males performed seven cycling exercise tests: one upright graded test, four fatigue tests (two upright, two supine) and two EMG tests (one upright, one supine). During the fatigue tests participants initially performed a 10 s all-out effort followed by a constant-load test with 10 s all-out bouts interspersed every minute. The load for the initial two fatigue tests was 80% of the peak power (PP) achieved during the graded test and these continued until failure. The remaining two fatigue tests were performed at 20% PP and were limited to the times achieved during the 80% PP tests. During the EMG tests subjects performed a 10 s all-out effort followed by a constant-load test to failure at 80% PP. Normalised EMG activities (% maximum, NEMG) were assessed in five lower limb muscles. Maximum power and maximum EMG activity prior to each fatigue and EMG test were unaffected by posture. The rate of fatigue at 80% PP was significantly higher during supine compared with upright posture (-68 ± 14 vs. -26 ± 6 W min-1, respectively, P\0.05) and the divergence of the fatigue responses occurred by the second minute of exercise. NEMG responses were significantly higher in the supine posture by 1–4 min of exercise. Results show that fatigue is significantly greater during supine compared with upright high-intensity cycling and this effect is accompanied by a reduced activation of musculature that is active during cycling.

Exercise performance and V0₂ kinetics during upright and recumbent high-intensity cycling exercise

This study investigated cycling performance and oxygen uptake (VO₂) kinetics between upright and two commonly used recumbent (R) postures, 65ºR and 30ºR. On three occasions, ten young active males performed three bouts of high-intensity constant-load (85% peak workload achieved during a graded test) cycling in one of the three randomly assigned postures (upright, 65ºR or 30ºR). The first bout was performed to fatigue and second and third bouts were limited to 7 min. A subset of seven subjects performed a final constant-load test to failure in the supine posture. Exercise time to failure was not altered when the body inclination was lowered from the upright (13.1 ± 4.5 min) to 65ºR (10.5 ± 2.7 min) and 30ºR (11.5 ± 4.6 min) postures; but it was significantly shorter in the supine posture (5.8 ± 2.1 min) when compared with the three inclined postures. Resulting kinetic parameters from a tri-exponential analysis of breath-by-breath VO₂ data during the first 7 min of exercise were also not different between the three inclined postures. However, inert gas rebreathing analysis of cardiac output revealed a greater cardiac output and stroke volume in both recumbent postures compared with the upright posture at 30 s into the exercise. These data suggest that increased cardiac function may counteract the reduction of hydrostatic pressure from upright ~25 mmHg; to 65ºR ~22 mmHg; and 30ºR ~18 mmHg such that perfusion of active muscle presumably remains largely unchanged, and also therefore, VO₂ kinetics and performance during high-intensity cycling.