876 resultados para fluidized beds


Relevância:

10.00% 10.00%

Publicador:

Resumo:

New U-Pb zircon and (40)Ar-(39)Ar K-feldspar data are presented for syn-sedimentary volcanogenic rocks from the Neoproterozoic Marica Formation, located in the southern Brazilian shield. Seven (of nine) U-Pb sensitive high-resolution ion microprobe analyses of zircons from pyroclastic cobbles yield an age of 630.2 +/- 3.4 Ma (2 sigma), interpreted as the age of syn-sedimentary volcanism, and thus of the deposition itself. This result indicates that the Marica Formation was deposited during the main collisional phase (640-620 Ma) of the Brasiliano II orogenic system, probably as a forebulge or back-bulge, craton-derived foreland succession. Thus, this unit is possibly correlative of younger portions of the Porongos, Brusque, Passo Feio, Abapa (Itaiacoca) and Lavalleja (Fuente del Puma) metamorphic complexes. Well-defined, step-heating (40)Ar-(39)Ar K-feldspar plateau ages obtained from volcanogenic beds and pyroclastic cobbles of the lower and upper successions of the Marica Formation yielded 507.3 +/- 1.8 Ma and 506.7 +/- 1.4 Ma (2 sigma), respectively. These data are interpreted to reflect total isotopic resetting during deep burial and thermal effects related to magmatic events. Late Middle Cambrian cooling below ca. 200 degrees C, probably related to uplift, is tentatively associated with intraplate effects of the Rio Doce and/or Pampean orogenies (Brasiliano III system). In the southern Brazilian shield, these intraplate stresses are possibly related to the dominantly extensional opening of a rift or a pull-apart basin, where sedimentary rocks of the Camaqua Group (Santa Barbara and Guaritas Formations) accumulated.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Gestão ética, socioambiental e de saúde

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este trabalho teve por objetivo identificar as vivências femininas no decorrer de seu primeiro parto normal. Pressupondo-se uma abordagem baseada nos ensinamentos fenomenológicos, foi planejada uma pesquisa exploratória de campo em que 30 puérperas de parto normal, poucas horas após terem dado à luz. As entrevistas seguiram o modelo metodológico da técnica de histórias de vida e, através destas, as puérperas contribuíram com um relato acerca de seu parto. Os relatos serviram para nos dar informes a respeito de quatro aspectos básicos acerca da parturiente no processar do seu parto normal: a) vivências físicas; b) vivências emocionais; c) significado da experiência e d) percepção da conduta médica. A experiência de gerar um filho para praticamente todas as mulheres entrevistadas mostrou-se altamente importante e plena de gratificações. Apenas um pequeno número de mulheres apresentou considerações negativas à chegada da criança.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Trata-se de uma pesquisa sobre parâmetros e indicadores quantitativos de pessoas em hospitais. Objetiva levantar e consolidar os tempos padrões, parâmetros e indicadores encontrados na literatura técnica, sobre dimensionamento de pessoas em hospitais. Busca relacionar os parâmetros e indicadores com as variáveis condicionantes do dimensionamento quantitativo de pessoas em hospitais, principalmente o número de leitos e a produção hospitalar.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We estimate the impact of the main unconditional federal grant (Fundo de Participaçãodos Municípios - FPM) to Brazilian municipalities as well as its spillover from the neighboring cities on local health outcomes. We consider data from 2002 to 2007 (Brollo et al, 2013) and explore the FPM distribution rule according to population brackets to apply a fuzzy Regression Discontinuity Design (RDD) using cities near the thresholds. In elasticity terms, we nd a reduction on infant mortality rate (-0.18) and on morbidity rate (- 0.41), except in the largest cities of our sample. We also nd an increase on the access to the main program of visiting the vulnerable families, the Family Health Program (Programa Sa ude da Família - PSF). The e ects are stronger for the smallest cities of our sample and we nd increase: (i) On the percentage of residents enrolled in the program (0.36), (ii) On the per capita number of PSF visits (1.59), and (iii) On the per capita number of PSF visits with a doctor (1.8) and nurse (2). After we control for the FPM spillover using neighboring cities near diferent thresholds, our results show that the reduction in morbidity and mortality is largely due to the spillover e ect, but there are negative spillover on preventive actions, as PSF doctors visits and vaccination. Finally, the negative spillover e ect on health resources may be due free riding or political coordination problems, as in the case of the number of hospital beds, but also due to to competition for health professionals, as in the case of number of doctors (-0.35 and -0.87, respectively), specially general practitioners and surgeons (-1.84 and -2.45).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

VALENTIM, R. A. M. ; MORAIS, A. H. F. ; SOUZA, V. S. V ; ARAUJO JUNIOR, H. B. ; BRANDAO, G. B. ; GUERREIRO, A. M. G. . Rede de Controle em Ambiente Hospitalar: um protocolo multiciclos para automação hospitalar sobre IEEE 802.3 com IGMP Snooping. Revista Ciência e Tecnologia, v. 11, p. 19, 2009

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The sharp consumption of natural resources by the construction industry has motivated numerous studies concerning the application of waste to replace partially or fully, some materials, such as aggregates, thereby reducing the environmental impact caused by the extraction of sand and crushing process. The application of stone dust from crushing process arising as an aggregate for the production of Portland cement concrete is a viable alternative in view of the high cost of natural sands, in addition to the environmental damage which causes its operation to the environment. The stone dust has reduced cost compared to natural sand because it is produced in the beds of their own quarries, which are usually located close to major urban centers. This study examined the feasibility of using stone dust from the crushing of rock gneisses in the state of Bahia, replacing natural quartz sand. In the development of scientific study was conducted to characterize physical and chemical raw materials applied and molded cylindrical specimens , using as reference values Fck 20, Fck 25 and Fck 30 MPa ( resistance characteristic of the concrete after 28 days) in following compositions stone powder: 10%, 30%, 50 %, 100% and 100% with additive. The specimens were cured and subjected to the tests of compressive strength and water absorption, then the samples were subjected to the tests of X-ray diffraction and scanning electron microscopy. The results obtained showed that the composition with 10% stone powder showed the best results regarding the physical and mechanical tests performed, confirming the reduction in compressive strength and increased water uptake increased as the content of the powder stone in the concrete composition

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The demand for alternative sources of energy drives the technological development so that many fuels and energy conversion processes before judged as inadequate or even non-viable, are now competing fuels and so-called traditional processes. Thus, biomass plays an important role and is considered one of the sources of renewable energy most important of our planet. Biomass accounts for 29.2% of all renewable energy sources. The share of biomass energy from Brazil in the OIE is 13.6%, well above the world average of participation. Various types of pyrolysis processes have been studied in recent years, highlighting the process of fast pyrolysis of biomass to obtain bio-oil. The continuous fast pyrolysis, the most investigated and improved are the fluidized bed and ablative, but is being studied and developed other types in order to obtain Bio-oil a better quality, higher productivity, lower energy consumption, increased stability and process reliability and lower production cost. The stability of the product bio-oil is fundamental to designing consumer devices such as burners, engines and turbines. This study was motivated to produce Bio-oil, through the conversion of plant biomass or the use of its industrial and agricultural waste, presenting an alternative proposal for thermochemical pyrolysis process, taking advantage of particle dynamics in the rotating bed that favors the right gas-solid contact and heat transfer and mass. The pyrolyser designed to operate in a continuous process, a feeder containing two stages, a divisive system of biomass integrated with a tab of coal fines and a system of condensing steam pyrolytic. The prototype has been tested with sawdust, using a complete experimental design on two levels to investigate the sensitivity of factors: the process temperature, gas flow drag and spin speed compared to the mass yield of bio-oil. The best result was obtained in the condition of 570 oC, 25 Hz and 200 cm3/min, temperature being the parameter of greatest significance. The mass balance of the elementary stages presented in the order of 20% and 37% liquid pyrolytic carbon. We determined the properties of liquid and solid products of pyrolysis as density, viscosity, pH, PCI, and the composition characterized by chemical analysis, revealing the composition and properties of a Bio-oil.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O uso de malhas ou filmes plásticos de diferente naturezas ou cores pode alterar a qualidade espectral da radiação e, como consequência, o crescimento e a produção de uma cultura vegetal. O objetivo do presente trabalho foi avaliar aspectos do crescimento e da produção de Anthurium andraeanum 'Apalai' sob diferentes malhas de sombreamento. Para tal, mudas micropropagadas foram plantadas em canteiros sob quatro malhas com 70% de sombreamento (azul, vermelha, preta e termo-refletora). O delineamento experimental foi inteiramente casualizado, com quatro tratamentos e quatro repetições de quatro plantas úteis por parcela. As avaliações foram realizadas durante 12 meses, sendo iniciadas após a produção de hastes florais comercializáveis. A malha preta se sobressaiu em relação às demais, proporcionando a melhor condição para crescimento e produção do antúrio, bem como as maiores dimensões da haste floral, que são consideradas atributos de qualidade para flor de corte.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O objetivo do presente trabalho foi avaliar o crescimento e a produção de Anthurium andraeanum 'Apalai' submetido a diferentes intensidades de desfolha no Vale do Ribeira, SP. Foram utilizadas mudas micropropagadas dessa espécie, as quais foram plantadas em canteiros construídos sob telado coberto com tela de náilon preta, com malha que proporciona 70% de sombreamento, no espaçamento 0,40x0,40m. O experimento foi conduzido em delineamento de blocos casualizados em parcelas subdivididas, com dezesseis repetições. O efeito da desfolha foi avaliado na parcela e o efeito do tempo após a desfolha na subparcela. As diferentes intensidades de desfolha consistiram em plantas com três, quatro e cinco folhas e plantas sem desfolha, e o tempo após a desfolha, as avaliações realizadas em 2006 e 2007. Ocorreu um aumento na área das folhas individuais em plantas mantidas com quatro e cinco folhas, proporcional à intensidade de desfolha, que pode ser relacionado a uma tentativa de compensação da área foliar perdida. A desfolha com a manutenção de três, quatro ou cinco folhas em plantas de antúrio 'Apalai' é prejudicial para o seu crescimento e produção.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)