Modelagem em 3D de uma patela humana e análise de esforços utilizando o método dos elementos finitos

Throughout the history of medicine surgeons realized the importance of the patella to the functioning of the knee. The main function of the patella is to increase the mechanical efficiency of the quadriceps tendon and knee extensor mechanism. It was found that 50% to 80% of the fractures without deviation of the patella have the transversal pattern, possibly due to excessive tensile forces applied to the extensor mechanism. The purpose of this study is to analyze the loads to which a patella is submitted during a normal extension movement of knee. This analysis will be done by modeling a 3D patella and subsequent load simulation as, described in medical literature, using the finite element method

Comportamento fractal de superfícies de fadiga em ligas aeronaúticas

Fracture surfaces express sequences of events of energy release with crack propagation in metal alloys, the evolution of topographic features can indicate the lines of load action, failures during the use or processing. The quantitative fractography is an important tool in the study of fracture surfaces, because it allows their interpretation and characterization. In order to evaluate the effectiveness of the characterization of fracture surfaces grounded on concepts such as selfsimilarity and self-affinity, it used the 15-5PH steel that was characterized by metallographic and tensile tests. The metallography allows the microstructural characterization of this steel and proved the presence of the martensite phase in the slats form and a fine-grained, both in the radial and in the axial direction of the dowel. The tensile test (ASTM E8) of this material allowed the determination of the mechanical properties, so based on the obtained results it was possible to affirm that the 15-5PH steel has high mechanical properties and a good stretch. Besides, the specimens also underwent testing of crack propagation, standardized by ASTM E647-00, thus it was obtained the fracture surfaces for characterization under monofractal and multifractal approaches. In front of all the exposed it was possible to conclude that in all measurements the correlation between the crack tip position and the fractal dimension was established in accordance with changes in the thickness and in the fracture micromechanisms presents. Furthermore, the multifractal approach was more sensitive to these variations allowing a more detailed characterization of the morphology

Desenvolvimento e caracterização de sistemas nanoestruturados bioadesivos com óleo de melaleuca (Melaleuca alternifolia) e estudo da ação repelente frente a Aedes aegypti

Doenças como dengue, malária, febre amarela e outras que são transmitidas por culicídeos determinam altas taxas de morbidade e mortalidade principalmente nos países tropicais. Uma alternativa para evitar picadas é o uso de repelentes. O mais utilizado é o repelente de DEET (N, N-dietil-3-m-toluamida), mas há relatos que descrevem casos de toxicidade com o uso de forma incorreta ou uso a longo prazo. Devido a essas desvantagens muitas pessoas preferem usar produtos naturais como repelentes. Estudos têm demonstrado que diferentes óleos essenciais têm atividade repelente, mas a investigação deve ser conduzida de forma a obter formulações que são eficazes na fixação de compostos aromáticos na pele, e aumentar a duração da repelência. Sistemas nanoestruturados para a liberação do princípio ativo, tais como sistemas líquido-cristalinos (SLC), têm vantagens na liberação controlada, uma vez que aumentam a estabilidade e a eficácia. Foram preparados sistemas constituídos por água, óleo de rícino hidrogenado PEG-40 (Eumulgin® HRE 40) como tensoativo e óleo essencial de melaleuca como fase oleosa. Esses sistemas foram analisados por de microscopia de luz polarizada, determinação do comportamento reológico e avaliação de bioadesão. A atividade repelente in vivo das formulações frente ao mosquito Aedes aegypti foi determinada empregando ensaio com humanos, para tanto utilizou-se uma caixa que evitava que os voluntários sofressem picadas. Foi verificada a ação repelente nos tempos 0, 30, 60 e 90 minutos ou até o momento em que não houvesse repelência. Realizou-se um estudo comparativo com um repelente comercial a base de DEET. Os resultados obtidos mostraram a presença de regiões de mesofases líquido-cristalinas do tipo cúbica (F18, F19 e F20) e microemulsão (F17) fixando-se a concentração do tensoativo em 30% e variando... (Resumo completo, clicar acesso eletrônico abaixo)

Alterações microestruturais decorrentes dos sucessivos reparos de solda TIG aplicados ao longo da vida útil de uma estrutura aeronáutica crítica à segurança de vôo

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Desempenho estrutural de vigas em madeira laminada colada armada

The objective of the present work was to evaluate Pinus’ glued laminated timber (glulam) beams and steel reinforced glulam beams, using PU mono-component adhesive in lamination step and epoxy adhesive to bond steel bars. The mechanical performance was verified through bending test, and the adopted method based on homogenized section, to considerate the differences between wood and steel mechanical properties. The homogenization section method proved itself effective in obtaining the stiffness of the parts in MLCA. The stiffness of reinforced beams increased 91% in comparison with glulam beams, differing only 5.5 % from value of stiffness calculated

Propriedades estruturais de géis de sílica preparados com adições de dodecil sulfato de sódio

This work aims to study the structural characteristics of silica gels obtained from the acid hydrolysis of tetraethoxysilane (TEOS) in water solutions with different concentrations of sodium dodecyl sulfate (SDS). The structural characteristics were studied in stages ranging from the wet gel to the dry stages of the gels (aerogels and xerogels). Aerogels were obtained by ambient pressure drying (APD) after silylation process using trimethylchlorosilane (TMCS) as silylating agent. Xerogels were obtained by conventional evaporating the liquid phase from non silylated gels. The samples were characterized by nitrogen adsorption and small angle X-ray scattering (SAXS). The structure of the wet gels and of the aerogels prepared with the surfactant exhibited characteristics of mass-fractal structures with fractal dimension D in the range 2.1-2.2 for the wet gels and 2.3-2.4 for the aerogels. The characteristic size  of the fractal domain reduces while the size a0 of the primary silica particle composing the fractal structure increases with the drying of the gels, in a process in which share of the porosity is eliminated. Aerogels exhibited typical values for the specific surface of 900 m2g-1 and of 3.5 cm3.g-1 for the total pore volume. These values are correspondingly comparable to those of the aerogels prepared by supercritical drying, since the silylation process replaces hydrophilic –OH groups by hydrophobic –Si-R3 ones, inhibiting the porosity elimination on drying. The silica particle size also increases lightly with the silylation because the attachment of the –Si-R3 groups on the silica surface. The pore size distribution curves of the aerogels are similar for all samples exhibiting a maximum in around 40 nm, independent the concentration of surfactant. This suggests that the characteristic size of 40 nm is due to the association of surfactant micelles... (Complete abstract click electronic access below)

Avaliação da colagem de suportes utilizados para fixar cabos elétricos em aeronaves

The most usual method to fix supports that hold the vast majority of electrical cables on an aircraft is accomplished by using, for this purpose, rivets. However, this procedure may some cause some inconveniences such as the need of effecting holes in the structure that is intended to fix these supports, thus decreasing resistance of the structure. In order to have an alternative to seek an increase in the performance of structured materials, the aircraft industry, like other industries, have been studying the use of collage as a method of replacing this usual forms. Against this backdrop, this paper aims to assess the strength and durability of a joint bonded using the adhesive EA9394, manufactured by company Henkel Corporation, and perform a careful survey of the mechanical performance of riveted structures, taking into account different types of conditioning environment and thus create a database that can be used by the aerospace industry

Caracterização estrutural da Zona de Falha de Cássia-MG

A Zona de Falha de Cássia constitui um feixe de falhas de direção preferencial NW-SE e aproximadamente 2 km de largura. Dados de campo, petrográficos e microestruturais evidenciam uma longa história deformacional da zona de falha. Assim, foram caracterizadas três fases de atividade/movimentação da Zona de Falha de Cássia. A primeira fase (précambriana) é caracterizada por deformação em regime dúctil, acarretando na geração de milonitos formados em condições metamórficas de fácies xisto verde. Este é o estágio de formação da falha, apresentando caráter transcorrente oblíqua, com movimentação sinistral inversa. A segunda fase corresponde a uma reativação da zona de falha como uma falha normal, com bloco alto a NE e bloco baixo a SW da referida estrutura. Seu registro é dado pela ocorrência localizada de brechas e cataclasitos. Este episódio de deformação eminentemente rúptil é correlacionado com o Soerguimento do Alto Paranaíba, o que indica movimentação da falha no Neocretáceo. A terceira e última fase é marcada pela formação de depósitos sedimentares plio-pleistocênicos compostos por brecha sedimentar de leques aluviais e sedimentos argilosos lacustres. Tais depósitos são interpretados como originados pelo represamento da drenagem subatual e conseqüente mudança do nível de base local, em decorrência de uma reativação da Zona de Falha de Cássia. O referido pacote sedimentar apresenta-se localmente cortado por fraturas, zonas brechadas e falhas, caracterizando atividade neotectônica na região. Além disso, foi mostrada a forte influência da zona de falha no desenvolvimento da paisagem da região, sendo constatada a inversão do relevo e da drenagem na área estudada.

Análise das ocorrências de escorregamento por meio de imagens Geoeye em trecho da faixa de dutos Rio de Janeiro - Belo Horizonte

The analysis of natural processes, such as landslides, has a great importance for the prevention of accidents in pipelines, since it might compromise its security, with serious social and environmental implications. Considering the large territorial dimensions that pipelines can reach, remote sensing tools have great applicability for data acquisition, allowing the analysis of large areas in regular time periods. This study aims to analyze the relations between the occurrence of landslides and its natural conditionings, on a stretch of the ORBEL pipeline, in the municipalities of Duque de Caxias, Nova Iguaçu and Belford Roxo – Rio de Janeiro. GeoEye sensor system images were used with spatial resolution of 0.5 m, from November/2009, January/2010 and March/2010, that are months of summer rains. The work involved the characterization of the study area and existing landslides, through bibliographic data collection; the application of visual analysis techniques for the extraction of landslide scars and fractures; preparation of maps for the landslide constraints and preparation of the susceptibility map. In the images from November only three landslide scars were extracted, while in January there were 166 and 111 in March. Difficulties were found with the shading in the images. From the relations among landslide scars, lithological units, relief systems, slope, downhill profile and the generated map of landslide susceptibility, presented in 1:70,000 scale, it was possible to conclude that slope is the main determinant of the process, allied secondarily to downhill profile, relief systems and lithology

Expansão ex vivo de células uroteliais em scaffolds 3D

Malformations and possible damages to the urogenital system can be originated in the embryonic period. Moreover, fire guns, knives and accidents, where there is the disruption of the urethra, also cause these lesions. The objective was to analyze the contribution of tissue engineering in the construction of neo-urethra, developed by bioengineering. We performed an urothelial ex vivo expansion of cells in 3D scaffolds (platelet gel matrix and acellular porcine aorta) to assess the contribution of this technique in the construction of a neo-urethra. Mechanical dissociation was made of the inner wall of 10 North Folk rabbit’s bladder, weighing 2.5 to 3.0 kg. After dissociation the cell content was centrifuged and obtained a pellet of urothelial cells. The pellet was ressuspended in culture medium DMEM F12 and cells were maintained in culture for 15 days. Immunohistochemical analysis characterized the urothelial culture. The cells were then implanted in the scaffold - platelet gel. In a second experiment using aortic porcine acellular matrix were implanted urothelial cells alone and urothelial cells on platelet gel, on the inner wall of the scaffold - aorta, with space for setting bordered by a urethral probe. The complex probe - cells - aorta and probe - cells in platelet gel - aorta, were sealed with suture material and culture were maintained in a humidified 37ºC incubator with 5% CO2 in air for 12 days to subsequent histological analysis of urothelium cell adhesion to the scaffolds. By observation under an optical microscope, we could see the growth of cells in the scaffold platelet gel, from a monolayer in to a three-dimensional structure. In the acellular porcine aortic matrix containing the platelet gel, we could observe a few quantity of urothelial cells adhered. However with the acellular porcine aortic matrix in which was implanted only the urothelial cells, we have obtained adhesion to the wall

Os recursos publicitários como ferramenta de valorização do fazer-jornalístico: um estudo das capas da Revista Veja

This study focuses on an analysis of the convergence of Journalism and Publicity on the covers of the magazine. This paper aims to clarify how the dynamics of that relationship, understanding that in contemporary society, both Journalism and Publicity to perform the same function-to inform, differing only in the objective-journalism sells news, Publicity sells dream. The magazine Veja was chosen for this study because its importance and scope in publishing. Inspired by Time magazine, founded in 1922 by Henry Luce, Veja was the 2nd review of gender information in Brazil. Today a record run of more than 1 million copies, occupying the 3rd position in the ranking of news magazines sold over the world and the largest weekly magazine of the U.S. Among the media, the magazine is the most identified with the publicity, because as disseminator of advertising, the magazine has the advantage of being able to achieve precisely the widest range of public and the possibility of dealing with many different subjects; In addition, the number of people who have contact with the advertising is much greater because, on average, four people read each issue and is also common that the same reader review the revised more than once, which helps in setting the message advertising. This affinity between magazine and publicity is in its essence as both are prepared for the market, seek to promote, show themselves to be bought. Accordingly, we intend to find out how media discourse of Veja and publicity, approach in the writing of magazine covers

Efeito da plataforma vibratória na recuperação da densidade óssea de ratas ovariectomizadas

As mudanças demográficas decorrentes do envelhecimento populacional têm contribuído substancialmente para o aumento de doenças crônicas não transmissíveis relacionadas à idade, dentre elas está a osteoporose, considerada um dos principais problemas de saúde pública, por sua prevalência crescente e pela associação a fraturas em diversas áreas do corpo, com graves repercussões clínicas e sociais. Com isso vem se buscando cada vez mais alternativas de exercício físico válidas para o combate e prevenção a estas doenças ósseas. Como possível alternativa têm se estudado os efeitos e benefícios dos treinamentos realizados em Plataformas Vibratórias, equipamento que através de baixa amplitude e alta freqüência pode vir a influenciar positivamente nas capacidades físicas. Portanto, devido à escassez de informações acerca dos efeitos do exercício na plataforma vibratória sobre a microarquitetura dos ossos em indivíduos idosos e já acometidos pela osteoporose, o objetivo deste estudo foi, com um modelo animal, descrever através de imagens de Microscopia Eletrônica de Varredura (MEV), a reação do tecido ósseo de ratas idosas ovariectomizadas ao exercício em Plataforma Vibratória. Para execução deste estudo foram utilizadas 20 ratas Wistar (Rattus Norvegicus Albinus Wistar), separadas em 4 grupos: Sedentário Controle (S), Sedentário Ovariectomizado (SO), Treinado Controle (T) e Treinado Ovariectomizado (TO). Como protocolo de treinamento a plataforma vibratória foi regulada com freqüência de 35 Hz e amplitude baixa (1 a 2 mm) e consistiu de uma fase de adaptação ao exercício e à vibração e após este período uma fase de treinamento. Para análise a região do osso selecionada foi o terço proximal da diáfise do fêmur. Como resultado, obtivemos que para o grupo SO a indução à osteoporose foi positiva quando comparada ao grupo S, que ...(Resumo completo, clicar acesso eletrônico abaixo)

Desenvolvimento de aplicativo de análise técnica e econômica para adaptação de uma roda d’água acionada por cima para geração de energia elétrica no meio rural

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Desvendando o sistema ABO: subsídios para o ensino de ciências e biologia

O conteúdo “Grupos sanguíneos” é abordado principalmente no ensino de biologia no Ensino Médio e está atrelado a diversas questões biológicas relevantes ao ensino básico. Além disso, sabe-se que esse tema é de cunho abstrato aos alunos, o que muitas vezes dificulta a apropriação do conteúdo pelo aluno. Nesse contexto, se torna relevante a elaboração de materiais que contribuam para um melhor processo de ensino e aprendizagem desse tema, além da incorporação da dimensão lúdica no universo escolar. Assim, a proposta do presente trabalho foi a elaboração de dois modelos didáticos de célula que facilitem a visualização da relação direta existente entre os genes responsáveis pela manifestação dos antígenos do sistema ABO, os genótipos dos diferentes indivíduos e as possibilidades de transfusão sanguínea existentes dentro de cada grupo sanguíneo. Além disso, foi construído um jogo didático de perguntas e respostas que envolvem os conhecimentos adquiridos durante a explanação teórica do professor com o intuito de fixação do conteúdo. O conteúdo fornecido neste trabalho foi baseado em livros didáticos, possibilitando aulas com conteúdo programático adequado e evitando erros conceituais

Comportamento da temperatura da massa de resíduos aterrados em um aterro sanitário

In this paper we investigate the temperature variation of the mass of waste along the depth in a household waste landfill of Rio Claro - SP, São Paulo, having a climate characterized as Tropical Altitude. In this research, there were two holes in two distinct points of the landfill, with different depths and characteristics in order to fix several thermal sensors - RTDs - to record the temperature at predetermined depths. Overall, the results show the influence of temperature at depths of up to 3.0 meters (from the surface) and that it varies in a manner to stabilize at depths above 5.0 meters. The highest temperature obtained was approximately 37.5 ° C for a time of waste disposal of 7 to 10 years. The results showed the presence of organic matter (substrate) which resulted in elevated temperature resulting from biological activity