Digital controller design considering hardware constraints: application in a paraplegic patient

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Strength of 3Y-TZP and feldspathic porcelain subjected to different cooling methods

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cogeneration design problem Computational complexity analysis and solution through an expert system

Purpose - The purpose of this paper is twofold: to analyze the computational complexity of the cogeneration design problem; to present an expert system to solve the proposed problem, comparing such an approach with the traditional searching methods available.Design/methodology/approach - The complexity of the cogeneration problem is analyzed through the transformation of the well-known knapsack problem. Both problems are formulated as decision problems and it is proven that the cogeneration problem is np-complete. Thus, several searching approaches, such as population heuristics and dynamic programming, could be used to solve the problem. Alternatively, a knowledge-based approach is proposed by presenting an expert system and its knowledge representation scheme.Findings - The expert system is executed considering two case-studies. First, a cogeneration plant should meet power, steam, chilled water and hot water demands. The expert system presented two different solutions based on high complexity thermodynamic cycles. In the second case-study the plant should meet just power and steam demands. The system presents three different solutions, and one of them was never considered before by our consultant expert.Originality/value - The expert system approach is not a "blind" method, i.e. it generates solutions based on actual engineering knowledge instead of the searching strategies from traditional methods. It means that the system is able to explain its choices, making available the design rationale for each solution. This is the main advantage of the expert system approach over the traditional search methods. On the other hand, the expert system quite likely does not provide an actual optimal solution. All it can provide is one or more acceptable solutions.

Survival rate, load to fracture, and finite element analysis of incisors and canines restored with ceramic veneers having varied preparation design

Purpose: To evaluate the survival rate, success rate, load to fracture, and finite element analysis (FEA) of maxillary central incisors and canines restored using ceramic veneers and varying preparation designs.Methods and Materials: Thirty human maxillary central incisors and 30 canines were allocated to the following four groups (n=15) based on the preparation design and type of tooth: Gr1 = central incisor with a conservative preparation; Gr2 = central incisor with a conventional preparation with palatal chamfer; Gr3 = canine with a conservative preparation; Gr4 = canine with a conventional preparation with palatal chamfer. Ceramic veneers (lithium disilicate) were fabricated and adhesively cemented (Variolink Veneer). The specimens were subjected to 4 x 106 mechanical cycles and evaluated at every 500,000 cycles to detect failures. Specimens that survived were subjected to a load to fracture test. Bidimensional models were modeled (Rhinoceros 4.0) and evaluated (MSC.Patrans 2005r2 and MSC.Marc 2005r2) on the basis of their maximum principal stress (MPS) values. Survival rate values were analyzed using the Kaplan-Meier test (alpha = 0.05) and load to fracture values were analyzed using the Student t-test (alpha = 0.05).Results: All groups showed 100% survival rates. The Student t-test did not show any difference between the groups for load to fracture. FEA showed higher MPS values in the specimens restored using veneers with conventional preparation design with palatal chamfer.Conclusion: Preparation design did not affect the fracture load of canines and central incisors, but the veneers with conventional preparation design with palatal chamfer exhibited a tendency to generate higher MPS values.

Memória ambiental, cultural e turismo no vale histórico do Rio Paraíba do Sul: design de uma pesquisa

This text is aimed at disseminating cultural and environmental wealth of a region little known of major tour operators - which is strongly marked by historical traditions, in a bucolic rural still and by the hospitality of its residents. The Historic Valley of Rio Paraíba do Sul, although located in the Rio - Sao Paulo road lives in the shadow of the remarkable progress of the industrial cities in the main Valley. This paper presents results of research that deepened the knowledge of this region, with notable findings from the standpoint of culture and tourism, regional and national history. Isolated by considerable geographical barriers, this region has two aspects: the rebirth of nature after the decline of coffee plantations, with ecological sanctuaries that can now point toward environmental sustainability, and the formation of a culture with two historical times - refinement inherited from the barons coffee, paradoxically linked to the rustic countryside and modernity derived of its proximity to major centers. The results presented here are part of exploratory research, but were presented at different events, emphasizing the baroque character of practices derived from these two historical times and tourist potential related to the “cultura tropeira” and to hospitality that marks this countryside.

Memória da produção em design gráfico na cidade de Bauru: (1987 a 1990)

Pós-graduação em Design - FAAC

Usabilidade, percepção estética e força de preensão manual: influência no design ergonômico de instrumentos manuais : um estudo com tesouras de poda

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A Ciência da Informação e o Design de Informação: perspectivas interdisciplinares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The study of cardiovascular risk in adolescents - ERICA: rationale, design and sample characteristics of a national survey examining cardiovascular risk factor profile in Brazilian adolescents

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Finite element analysis of the influence of geometry and design of zirconia crowns on stress distribution

Purpose: To evaluate the influence of the geometry and design of prosthetic crown preparations on stress distribution in compression tests, using finite element analysis (FEA). Materials and Methods: Six combinations of 3D drawings of all-ceramic crowns (yttria-stabilized zirconia framework and porcelain veneer) were evaluated: F, flat preparation and simplified crown; FC, flat preparation and crown with contact point; FCM, flat preparation and modified crown; A, anatomical preparation and simplified anatomical crown framework; AC, anatomical preparation and crown with contact point; and ACM, anatomical preparation and modified crown. Bonded contact types at all interfaces with the mesh were assigned, and the material properties used were according to the literature. A 200 N vertical load was applied at the center of each model. The maximum principal stresses were quantitatively and qualitatively analyzed. Results: The highest values of tensile stress were observed at the interface between the ceramics in the region under the load application for the simplified models (F and A). Reductions in stress values were observed for the model with the anatomical preparation and modified infrastructure (ACM). The stress distribution in the flat models was similar to that of their respective anatomical models. Conclusions: The modified design of the zirconia coping reduces the stress concentration at the interface with the veneer ceramic, and the simplified preparation can exert a stress distribution similar to that of the anatomical preparation at and near the load point, when load is applied to the center of the crown.

Estimation of a preference map of new consumers for spatial load forecasting simulation methods using a spatial analysis of points

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Studies on the application of Myceliophthora thermophila JCP1-4 cellulases cocktail on sugarcane bagasse pretreated by different methods

The hydrolysis step for sugar production in biorefineries is crucial for the sequential processes involved and cellulases cocktails behave differently according to the pretreatment employed. In this study, the application of the cellulases cocktail produced by the fungus Myceliophthora thermophila JCP1-4 was studied on the saccharification of sugarcane bagasse pretreated by ozonolysis and thermic ferric nitrate (TFN), and the results were compared with commercial enzymes (Novozymes Celluclast 1.5L, Novozym 188). The fungal cellulases cocktail hold an activity of FPU:β-glucosidase of 1:4(U/mL); time, temperature, FPU by g of cellulose load and percentage of dry matter (DM) were studied. The analysis of central composite design of TFN pretreated showed that fungal cellulases works better in DM values of 3–3.5% (4.5% for commercial), temperatures higher than 50 °C (<45 °C for commercial) and 15FPU for both; commercial enzymes yielded 7.78 g/L of reducing sugars and the fungal enzymes 5.42 g/L. With the ozone pretreated, the fungal enzymes presented a higher thermostability with faster kinects, being able to produce 5.56 g/L of reducing sugars (60 °C, 8 h), against 5.20 g/L for commercial enzymes (50 °C, 24 h), (10FPU, 3%DM for both). The FPU derivate analysis revels better yields with 7.5FPU, and the increase of DM to 7.5% resulted 13.28 g/L of reducing sugars.

Elementos de interoperabilidade na perspectiva da catalogação descritiva

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Weed suppression in the formation of brachiarias under three sowing methods

The success of conservation systems such as no-till depends on adequate soil cover throughout the year, which is possible through the use of cover crops. For this purpose the species belonging to the genus Urochloa has stood out by virtue of its hardiness and tolerance to drought. Aiming ground cover for the no-till system, the objective was to evaluate the establishment of two species of the genus Urochloa, in three sowing methods, in the weed suppression and the sensitivity of these forages to glyphosate. The study design was a randomized block with a 2 x 3 x 3 factorial arrangement, in which factor A was composed of Urochloa ruziziensis and Urochloa hybrid CIAT 36087 cv. Mulato II, factor B was formed by sowing methods: sown without embedding, sown with light embedding and sown in rows, and factor C was composed of three doses of glyphosate (0.975, 1.625 and 2.275 kg ha(-1) of acid equivalent). For determination of weed suppression, assessment of biomass yield and soil cover was performed, by brachiaria and weeds, at 30, 60, 90, 120 and 258 days after sowing. Visual assessment of the desiccation efficiency at 7 and 14 days after herbicide application was performed. It is concluded that embedding Urochloa seeds stands out in relation to sowing in the soil surface. Urochloa ruziziensis is more efficient in the dry weight yield, weed suppression, in addition to being more sensitive to glyphosate herbicide.

Validation of mechanical, electrical and thermal nociceptive stimulation methods in horses

To validate a model for investigating the effects of analgesic drugs on mechanical, thermal and electrical stimulation testing. To investigate repeatability, sensitivity and specificity of nociceptive tests. Randomised experiment with 2 observers in 2 phases. Mechanical (M), thermal (TL) and electrical (E) stimuli were applied to the dorsal metacarpus (M-left and TL-right) and coronary band of the left thoracic limb (E) and a thoracic thermal stimulus (TT) was applied caudal to the withers in 8 horses (405 ± 43 kg). Stimuli intensities were increased until a clear avoidance response was detected without exceeding 20 N (M), 60°C (TL and TT) and 15 V (E). For each set of tests, 3 real stimuli and one sham stimulus were applied (32 per animal) using a blinded, randomised, crossover design repeated after 6 months. A distribution frequency and, for each stimulus, Chi-square and McNemar tests compared both the proportion of positive responses detected by 2 observers and the 2 study phases. The κ coefficients estimated interobserver agreement in determining endpoints. Sensitivity (384 tests) and specificity (128 tests) were evaluated for each nociceptive stimulus to assess the evaluators' accuracy in detecting real and sham stimuli. Nociceptive thresholds were 3.1 ± 2 N (M), 8.1 ± 3.8 V (E), 51.4 ± 5.5°C (TL) and 55.2 ± 5.3°C (TT). The level of agreement after all tests, M, E, TL and TT, was 90, 100, 84, 98 and 75%, respectively. Sensitivity was 89, 100, 89, 98 and 70% and specificity 92, 97, 88, 91 and 94%, respectively. The high interobserver agreement, sensitivity and specificity suggest that M, E and TL tests are valid for pain studies in horses and are suitable tools for investigating antinociceptive effects of analgesics in horses.