Molecular architecture of thin films fabricated via physical vapor deposition and containing a poly(azo)urethane

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Optimized architecture for Tyrosinase-containing Langmuir-Blodgett films to detect pyrogallol

The control of molecular architectures has been a key factor for the use of Langmuir-Blodgett (LB) films in biosensors, especially because biomolecules can be immobilized with preserved activity. In this paper we investigated the incorporation of tyrosinase (Tyr) in mixed Langmuir films of arachidic acid (AA) and a lutetium bisphthalocyanine (LuPc2), which is confirmed by a large expansion in the surface pressure isotherm. These mixed films of AA-LuPc2 + Tyr could be transferred onto ITO and Pt electrodes as indicated by FTIR and electrochemical measurements, and there was no need for crosslinking of the enzyme molecules to preserve their activity. Significantly, the activity of the immobilised Tyr was considerably higher than in previous work in the literature, which allowed Tyr-containing LB films to be used as highly sensitive voltammetric sensors to detect pyrogallol. Linear responses have been found up to 400 mu M, with a detection limit of 4.87 x 10(-2) mu M (n = 4) and a sensitivity of 1.54 mu A mu M-1 cm(-2). In addition, the Hill coefficient (h = 1.27) indicates cooperation with LuPc2 that also acts as a catalyst. The enhanced performance of the LB-based biosensor resulted therefore from a preserved activity of Tyr combined with the catalytic activity of LuPc2, in a strategy that can be extended to other enzymes and analytes upon varying the LB film architecture.

Molecular architecture and electrical properties in evaporated films of cobalt phthalocyanine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evolving Future Internet clean-slate Entity Title Architecture with quality-oriented control-plane extensions

A Internet atual vem sofrendo vários problemas em termos de escalabilidade, desempenho, mobilidade, etc., devido ao vertiginoso incremento no número de usuários e o surgimento de novos serviços com novas demandas, propiciando assim o nascimento da Internet do Futuro. Novas propostas sobre redes orientadas a conteúdo, como a arquitetura Entidade Titulo (ETArch), proveem novos serviços para este tipo de cenários, implementados sobre o paradigma de redes definidas por software. Contudo, o modelo de transporte do ETArch é equivalente ao modelo best-effort da Internet atual, e vem limitando a confiabilidade das suas comunicações. Neste trabalho, ETArch é redesenhado seguindo o paradigma do sobreaprovisionamento de recursos para conseguir uma alocação de recursos avançada integrada com OpenFlow. Como resultado, o framework SMART (Suporte de Sessões Móveis com Alta Demanda de Recursos de Transporte), permite que a rede defina semanticamente os requisitos qualitativos das sessões para assim gerenciar o controle de Qualidade de Serviço visando manter a melhor Qualidade de Experiência possível. A avaliação do planos de dados e de controle teve lugar na plataforma de testes na ilha do projeto OFELIA, mostrando o suporte de aplicações móveis multimídia com alta demanda de recursos de transporte com QoS e QoE garantidos através de um esquema de sinalização restrito em comparação com o ETArch legado

The influence of external ultrasound on the histologic architecture of the organic capsule around smooth silicone implants: Experimental study in rats

Background Capsular contracture is the main complication related to breast silicone implants, and its prevention remains a medical challenge. The authors present experimental research examining the effect of external ultrasound on the formation and contracture of peri-implant capsules.Methods In this study, 42 male Wistar rats had a 2-mm smooth surface implant placed in a dorsal submuscular pocket. They then were separated into ultrasound'' and control'' groups that received repeated external applications either with or without the ultrasound power on. Ultrasound applications were given three times a week for a period of 90 days. After that, both groups were housed under the same conditions with no application scheduled. Five animals of each group, killed at 30, 60, 90, and 180 days, had their implants removed along with the capsule, which received a special histologic preparation via annular sectioning that provided wide circumferential observation of the capsular tissue. Sections were stained with hematoxylin/eosin stain, Masson's trichrome stain, and Pricrosirius Red stain for regular microscopic evaluation under normal and polarized light.Results Histologic data showed that capsules from the ultrasound and control groups had statistically significant differences. Ultrasound application developed a capsular architecture similar to that shown within textured silicone implants, and its effect had an early definition with subsequent stabilization.Conclusion The authors conclude that early and repeated external ultrasound application enhances the thickness, cellular count, and vascularity of smooth silicone capsular tissue, whereas it diminishes the pattern of parallel orientation of collagen fibers.

Nesting biology and fungiculture of the fungus-growing ant, Mycetagroicus cerradensis: New light on the origin of higher-attine agriculture

The genus Mycetagroicus is perhaps the least known of all fungus-growing ant genera, having been first described in 2001 from museum specimens. A recent molecular phylogenetic analysis of the fungus-growing ants demonstrated that Mycetagroicus is the sister to all higher attine ants (Trachymyrmex, Sericomyrmex, Acromyrmex, Pseudoatta, and Atta), making it of extreme importance for understanding the transition between lower and higher attine agriculture. Four nests of Mycetagroicus cerradensis near Uberlandia, Minas Gerais, Brazil were excavated, and fungus chambers for one were located at a depth of 3.5 meters. Based on its lack of gongylidia (hyphal-tip swellings typical of higher attine cultivars), and a phylogenetic analysis of the ITS rDNA gene region, M. cerradensis cultivates a lower attine fungus in Clade 2 of lower attine (G3) fungi. This finding refines a previous estimate for the origin of higher attine agriculture, an event that can now be dated at approximately 21-25 mya in the ancestor of extant species of Trachymyrmex and Sericomyrmex.

Morphological architecture of Actinocephalus (Koern.) sano (Eriocaulaceae-Poales)

Actinocephalus exhibits perhaps more diversity in habit than any other genus of Eriocaulaceae. This variation is largely a result of differences in the arrangement of the paraclades. Based on the analysis of stem architecture of all 25 species of Actinocephalus, the following patterns were established: (1) leaf rosette, with no elongated axis, instead the axillary paraclades originating directly from the short aerial stem, (2) rosette axis continuing into an elongated axis with spirally arranged paraclades, (3) an elongated axis originating from a rhizome, with ramified paraclades, and (4) an elongated axis originating from a short aerial stem, with paraclades arranged in a subwhorl. The elongated axis exhibits indeterminate growth only in pattern 4. Patterns 3 and 4 are found exclusively in Actinocephalus; pattern I occurs in many other genera of Eriocaulaceae, while pattern 2 is also found in Syngonanthus and Paepalanthus. Anatomically, each stem structure (i.e., paraclade, elongated axis, short aerial stem, rhizome) is thickened in a distinctive way and this can be used to distinguish them. Specifically, elongated axes and paraclades lack thickening, thickening of short aerial stems results from the primary thickening meristem and/or the secondary thickening meristem. Thickening of rhizomes results from the activity of the primary thickening meristem. (c) 2008 Elsevier GmbH. All rights reserved.

Nest architecture and population dynamics of the Ponerinae ant, Ectatomma opaciventre Roger (Hymenoptera : Formicidae)

Eleven nests of Ectatomma opaciventre were collected from January to December, 1994, in Rio Claro, SP, southeastern Brazil. This species excavates their nests up to 68 cm deep, containing 3, 4 or 5 chambers. The hole of entrance has a chimney-like rigid structure, with up to 2/5 cm high. The most numerous colonies were found in January and February, with 47 and 62 adult ants, respectively. The quantity of individuals decreased from March, being observed colonies with only 9 adult ants in June and July. The colony population increased again since September. Reproductive forms (winged ants) were observed between October and February. We did not observed immature stages in July, but they were numerous between September and March. There was a significant correlation between the number of colony individuals and temperature, but not between the number of colony individuals and relative humidity and rainfall. E. opaciventre is a species of hunter ants which have not an efficient recruitment system for food collecting, consequently their colonies are small due to the scarcity of food resources during the colder and dry months.

Nest architecture of Pachycondyla striata Fr. Smith, 1858 (Formicidae, Ponerinae)

Nine nests of Pachycondyla striata Fr. Smith, 1858 were excavated between 2006 and 2007 at the UNESP university campus in Rio Claro, SP, southeastern Brazil. The P. striata population was larger in the two nests excavated in the months of August and November, 2006. The nests of this species are simple and poorly elaborated, with chambers and tunnels close to the ground surface. P. striata places the pupae in chambers isolated from the other individuals. The lack of chambers with the specific purpose of conditioning food and garbage underscores the simplicity of these nests.

3D calculation of Tucson-Melbourne 3NF effect in triton binding energy

As an application of the new realistic three-dimensional (3D) formalism reported recently for three-nucleon (3N) bound states, an attempt is made to study the effect of three-nucleon forces (3NFs) in triton binding energy in a non partial wave (PW) approach. The spin-isospin dependent 3N Faddeev integral equations with the inclusion of 3NFs, which are formulated as function of vector Jacobi momenta, specifically the magnitudes of the momenta and the angle between them, are solved with Bonn-B and Tucson-Melbourne NN and 3N forces in operator forms which can be incorporated in our 3D formalism. The comparison with numerical results in both, novel 3D and standard PW schemes, shows that non PW calculations avoid the very involved angular momentum algebra occurring for the permutations and transformations and it is more efficient and less cumbersome for considering the 3NF.

Architecture and relevance of several strongly adhered biofilms over a polyester imide (PEI) surface

Um estudo microscópico foi considerado para analisar a eventual adesão de fungos sobre uma superfície de poliéster-imida presente em fios de cobre esmaltados. A microscopia eletrônica de varredura, permitiu observar nestes biofilmes aderidos, uma alta quantidade de pigmentos, hifas e um arsenal enzimático possivelmente atuando na superfície desta macromolécula. Devido a natureza altamente aromática deste material e traços de derivados fenólicos usados como solventes - que se fazem ainda presentes no polímero já reticulado, uma certa atividade anti-fúngica poderia ser esperada, todavia não foram observadas alterações no crescimento dos microrganismos, bem como no processo de adesão dos fungos. Adicionalmente a este fato, os fios esmaltados revelaram total descaracterização de suas propriedades isolantes. Os estudos visam compreender e avaliar o grande potencial demonstrado pelos fungos que poderia em caráter vindouro, explorado em processos de biodeterioração e biodegradação

Nest architecture of the leaf-cutting ant Acromyrmex rugosus rugosus

The prominent nests mounds of many ant species are one of the most obvious signs of their presence, yet the subterranean architecture of nests is often poorly known. The present work aimed to establish the external and internal structure of nests of a species of leaf-cutting ant, Acromyrmex rugosus rugosus, by either marking the interior of nests with talcum powder, or forming casts with cement. Twelve nests were excavated and surveyed, with eight being marked with talcum powder and four cast with cement. The external and internal structure of the nests was highly variable. The largest and smallest nests had mound areas of 9.89 m(2) and 0.01 m(2) respectively. The number of chambers found ranged from I to 26, with maximum dimensions of between 6 and 70 cm. Chambers were found close to the soil surface (6 cm) down to a maximum depth of 3.75 m. In addition to chambers containing fungus garden, some chambers were found to be empty, filled with soil or filled with waste, the first time this has been recorded in a species of Acromyrmex. The nests of A. rugosus rugosus appear to be unusually complex for the genus, containing a diversity of irregular chambers and tunnels.

Nest architecture of Atta laevigata (F. Smith, 1858) (Hymenoptera : Formicidae)

The internal structure of three nests of Atta laevigata was studied in Botucatu city, São Paulo State, Brazil. Two nests were excavated through the opening of trenches and one was cement-moulded to enable a better view of the internal structures. The three nests presented a similar structure, with the depths and number of chambers varying as a function of the loose soil area of the nests. The number of chambers ranged from 1149 to 7864, reaching as deep as 7 m underground. Chamber volume ranged from 0.03 to 511. The foraging tunnels extended as far as 70m from the loose soil region. The nests of this species are the deepest within the genus Atta and have the highest number of chambers.

Simplified architecture of a neurofuzzy controller applied on industrial systems for fluid flow control

This work presents a simplified architecture of a neurofuzzy controller for general purpose applications that tries to minimize the processing used in the several stages of hazy modeling of systems. The basic procedures of fuzzification and defuzzification are simplified to the maximum while the inference procedures are computed in a private way. The simplified architecture allows a fast and easy configuration of the neurofuzzy controller and the structuring rules that define the control actions is automatic. Th controller's Limits and performance are standardized and the control actions are previously calculated. For application, the industrial systems of fluid flow control will be considered.