International Service-Learning and the Development of Civic Identity: Understanding the Role of Short-Term International Service-Learning and its Influence on the Development of Civic Identity in College Students Using a Mixed Methodological Approach

Higher education has a responsibility to educate a democratic citizenry and recent research indicates civic engagement is on the decline in the United States. Through a mixed methodological approach, I demonstrate that the potential exists for well structured short-term international service-learning programming to develop college students’ civic identities. Quantitative analysis of questionnaire data, collected from American college students immediately prior to their participation in a short-term service-learning experience in Northern Ireland and again upon their return to the United States, revealed increases in civic accountability, political efficacy, justice oriented citizenship, and service-learning. Subsequent qualitative analysis of interview transcripts, student journals, and field notes suggested that facilitated critical reflection before, during, and after the experience promoted transformational learning. Emergent themes included: (a) responsibilities to others, (b) the value of international service-learning, (c) crosspollination of ideas, (d) stepping outside the daily routine to facilitate divergent thinking, and (e) the necessity of precursory thinking for sustaining transformations in thinking. The first theme, responsibilities to others, was further divided into subthemes of thinking beyond oneself, raising awareness of responsibility to others, and voting responsibly.

The Impact of Gender and Pedagogy on the Development of Self-Regulated Learning Strategies in Undergraduate Engineering Classrooms

The purpose of this paper is to examine ways in which pedagogy and gender of instructor impact the development of self-regulated learning strategies as assessed by the Motivated Strategies for Learning Questionnaire (MSLQ) in male and female undergraduate engineering students. Pedagogy was operationalized as two general formats: lecture plus active learning techniques or problem-base/project-based learning. One hundred seventy-six students from four universities participated in the study. Within-group analyses found significant differences with regard to pedagogy, instructors’ gender, and student gender on the learning strategies and motivation subscales as operationalized by the MSLQ. Male and females students reported significant post-test differences with regard to the gender of instructor and the style of pedagogy. The results of this study showed a pattern where more positive responses for students of both genders were found with the same-gendered instructor. The results also suggested that male students responded more positively to project and problem-based courses with changes evidenced in motivation strategies and resource management. Female students showed decreases in resource management in these two types of courses. Further, female students reported increases in the lecture with active learning courses.

Effect of Classroom Gender Composition on Students' Development of Self-Regulated Learning Competencies

Success in any field depends on a complex interplay among environmental and personal factors. A key set of personal factors for success in academic settings are those associated with self-regulated learners (SRL). Self-regulated learners choose their own goals, select and organize their learning strategies, and self-monitor their effectiveness. Behaviors and attitudes consistent with self-regulated learning also contribute to self-confidence, which may be important for members of underrepresented groups such as women in engineering. This exploratory study, drawing on the concept of "critical mass", examines the relationship between the personal factors that identify a self-regulated learner and the environmental factors related to gender composition of engineering classrooms. Results indicate that a relatively student gender-balanced classroom and gender match between students and their instructors provide for the development of many adaptive SRL behaviors and attitudes.

Maternal and Postweaning High-Fat Diets Disturb Hippocampal Gene Expression, Learning, and Memory Function

We tested the hypothesis that excess saturated fat consumption during pregnancy, lactation, and/or postweaning alters the expression of genes mediating hippocampal synaptic efficacy and impairs spatial learning and memory in adulthood. Dams were fed control chow or a diet high in saturated fat before mating, during pregnancy, and into lactation. Offspring were weaned to either standard chow or a diet high in saturated fat. The Morris Water Maze was used to evaluate spatial learning and memory. Open field testing was used to evaluate motor activity. Hippocampal gene expression in adult males was measured using RT-PCR and ELISA. Offspring from high fat-fed dams took longer, swam farther, and faster to try and find the hidden platform during the 5-day learning period. Control offspring consuming standard chow spent the most time in memory quadrant during the probe test. Offspring from high fat-fed dams consuming excess saturated fat spent the least. The levels of mRNA and protein for brain-derived neurotrophic factor and activity-regulated cytoskeletal-associated protein were significantly decreased by maternal diet effects. Nerve growth factor mRNA and protein levels were significantly reduced in response to both maternal and postweaning high-fat diets. Expression levels for the N-methyl-D-aspartate receptor (NMDA) receptor subunit NR2B as well as synaptophysin were significantly decreased in response to both maternal and postweaning diets. Synaptotagmin was significantly increased in offspring from high fat-fed dams. These data support the hypothesis that exposure to excess saturated fat during hippocampal development is associated with complex patterns of gene expression and deficits in learning and memory.

Influence of Engineering Instructors' Teaching and Learning Beliefs on Pedagogies in Engineering Science Courses

This study explored how academics' beliefs about teaching and learning influenced their teaching in engineering science courses typically taught in the second or third year of 4-year engineering undergraduate degrees. Data were collected via a national survey of 166 U. S. statics instructors and interviews at two different institutions with 17 instructors of engineering science courses such as thermodynamics, circuits and statics. The study identified a number of common beliefs about how to best support student learning of these topics; each is discussed in relation to the literature about student development and learning. Specific recommendations are given for educational developers to encourage use of research-based instructional strategies in these courses.

Learning to Live in a Therapeutic Community: A study of elderly inpatients.

Fifty-two elderly mental patients in a state hospital were transferred to a new milieu ward. In order to evaluate patient success in the unit, three outcome categories were defined nine months after the unit opened: discharge to the community, adjustment to the setting, and return to the previous ward. Despite the unit's emphasis on performance criteria for success, staff evaluations of the patients' personality rather than the patients' achievement of the behavioural criteria, accounted for success in the setting.

Multimodal Integration in Statistical Learning: Evidence from the McGurk Illusion

Recent advances in the field of statistical learning have established that learners are able to track regularities of multimodal stimuli, yet it is unknown whether the statistical computations are performed on integrated representations or on separate, unimodal representations. In the present study, we investigated the ability of adults to integrate audio and visual input during statistical learning. We presented learners with a speech stream synchronized with a video of a speaker's face. In the critical condition, the visual (e.g., /gi/) and auditory (e.g., /mi/) signals were occasionally incongruent, which we predicted would produce the McGurk illusion, resulting in the perception of an audiovisual syllable (e.g., /ni/). In this way, we used the McGurk illusion to manipulate the underlying statistical structure of the speech streams, such that perception of these illusory syllables facilitated participants' ability to segment the speech stream. Our results therefore demonstrate that participants can integrate audio and visual input to perceive the McGurk illusion during statistical learning. We interpret our findings as support for modality-interactive accounts of statistical learning.

AAC&U's Integrative Liberal Learning and the CAS Standards: Advising for a 21st Century Liberal Education

The Association of American Colleges and Universities presented and promoted integrative liberal learning as a collaborative goal that all institutions of higher education must strive to achieve. The similarities between the goals of integrative liberal learning and the Standards for Academic Advising by the Council for the Advancement of Standards in Higher Education are discussed with emphasis placed on the critical role that academic advising plays in support of an integrative liberal learning education, and in turn, future success for all students.

Engaged Learning: Enabling Self-Authorship and Effective Practice

There is now broad consensus that higher education must extend beyond content-based knowledge to encompass intellectual and practical skills, personal and social responsibility, and integrative learning. The college learning outcomes needed for success in 21st century life include critical thinking, a coherent sense of self, intercultural maturity, civic engagement, and the capacity for mutual relationships. Yet, research suggests that college students are struggling to achieve these outcomes in part because skills needed to succeed in college are not those needed to succeed upon graduation. One reason for this gap is that these college learning outcomes require complex developmental capacities or “self-authorship” that higher education is not currently designed to promote.

Writing center handbooks and travel guidebooks : redesigning instructional texts for multicultural, multilingual, and multinational contexts

In an increasingly interconnected world characterized by the accelerating interplay of cultural, linguistic, and national difference, the ability to negotiate that difference in an equitable and ethical manner is a crucial skill for both individuals and larger social groups. This dissertation, Writing Center Handbooks and Travel Guidebooks: Redesigning Instructional Texts for Multicultural, Multilingual, and Multinational Contexts, considers how instructional texts that ostensibly support the negotiation of difference (i.e., accepting and learning from difference) actually promote the management of difference (i.e., rejecting, assimilating, and erasing difference). As a corrective to this focus on managing difference, chapter two constructs a theoretical framework that facilitates the redesign of handbooks, guidebooks, and similar instructional texts. This framework centers on reflexive design practices and is informed by literacy theory (Gee; New London Group; Street), social learning theory (Wenger), globalization theory (Nederveen Pieterse), and composition theory (Canagarajah; Horner and Trimbur; Lu; Matsuda; Pratt). By implementing reflexive design practices in the redesign of instructional texts, this dissertation argues that instructional texts can promote the negotiation of difference and a multicultural/multilingual sensibility that accounts for twenty-first century linguistic and cultural realities. Informed by the theoretical framework of chapter two, chapters three and four conduct a rhetorical analysis of two forms of instructional text that are representative of the larger genre: writing center coach handbooks and travel guidebooks to Hong Kong. This rhetorical analysis reveals how both forms of text employ rhetorical strategies that uphold dominant monolingual and monocultural assumptions. Alternative rhetorical strategies are then proposed that can be used to redesign these two forms of instructional texts in a manner that aligns with multicultural and multilingual assumptions. These chapters draw on the work of scholars in Writing Center Studies (Boquet and Lerner; Carino; DiPardo; Grimm; North; Severino) and Technical Communication (Barton and Barton; Dilger; Johnson; Kimball; Slack), respectively. Chapter five explores how the redesign of coach handbooks and travel guidebooks proposed in this dissertation can be conceptualized as a political act. Ultimately, this dissertation argues that instructional texts are powerful heuristic tools that can enact social change if they are redesigned to foster the negotiation of difference and to promote multicultural/multilingual world views.

Place for video games : a theoretical and pedagogical framework for multiliteracies learning in English studies

Students are now involved in a vastly different textual landscape than many English scholars, one that relies on the “reading” and interpretation of multiple channels of simultaneous information. As a response to these new kinds of literate practices, my dissertation adds to the growing body of research on multimodal literacies, narratology in new media, and rhetoric through an examination of the place of video games in English teaching and research. I describe in this dissertation a hybridized theoretical basis for incorporating video games in English classrooms. This framework for textual analysis includes elements from narrative theory in literary study, rhetorical theory, and literacy theory, and when combined to account for the multiple modalities and complexities of gaming, can provide new insights about those theories and practices across all kinds of media, whether in written texts, films, or video games. In creating this framework, I hope to encourage students to view texts from a meta-level perspective, encompassing textual construction, use, and interpretation. In order to foster meta-level learning in an English course, I use specific theoretical frameworks from the fields of literary studies, narratology, film theory, aural theory, reader-response criticism, game studies, and multiliteracies theory to analyze a particular video game: World of Goo. These theoretical frameworks inform pedagogical practices used in the classroom for textual analysis of multiple media. Examining a video game from these perspectives, I use analytical methods from each, including close reading, explication, textual analysis, and individual elements of multiliteracies theory and pedagogy. In undertaking an in-depth analysis of World of Goo, I demonstrate the possibilities for classroom instruction with a complex blend of theories and pedagogies in English courses. This blend of theories and practices is meant to foster literacy learning across media, helping students develop metaknowledge of their own literate practices in multiple modes. Finally, I outline a design for a multiliteracies course that would allow English scholars to use video games along with other texts to interrogate texts as systems of information. In doing so, students can hopefully view and transform systems in their own lives as audiences, citizens, and workers.

Effects of instructional changes on student learning of electrochemistry in an IB chemistry course

This study investigated the effectiveness of incorporating several new instructional strategies into an International Baccalaureate (IB) chemistry course in terms of how they supported high school seniors’ understanding of electrochemistry. The three new methods used were (a) providing opportunities for visualization of particle movement by student manipulation of physical models and interactive computer simulations, (b) explicitly addressing common misconceptions identified in the literature, and (c) teaching an algorithmic, step-wise approach for determining the products of an aqueous solution electrolysis. Changes in student understanding were assessed through test scores on both internally and externally administered exams over a two-year period. It was found that visualization practice and explicit misconception instruction improved student understanding, but the effect was more apparent in the short-term. The data suggested that instruction time spent on algorithm practice was insufficient to cause significant test score improvement. There was, however, a substantial increase in the percentage of the experimental group students who chose to answer an optional electrochemistry-related external exam question, indicating an increase in student confidence. Implications for future instruction are discussed.

Development of one-dimensional and two-dimensional computational tools that simulate steady internal condensing flows in terrestrial and zero-gravity environments

This dissertation presents an effective quasi one-dimensional (1-D) computational simulation tool and a full two-dimensional (2-D) computational simulation methodology for steady annular/stratified internal condensing flows of pure vapor. These simulation tools are used to investigate internal condensing flows in both gravity as well as shear driven environments. Through accurate numerical simulations of the full two dimensional governing equations, results for laminar/laminar condensing flows inside mm-scale ducts are presented. The methodology has been developed using MATLAB/COMSOL platform and is currently capable of simulating film-wise condensation for steady (and unsteady flows). Moreover, a novel 1-D solution technique, capable of simulating condensing flows inside rectangular and circular ducts with different thermal boundary conditions is also presented. The results obtained from the 2-D scientific tool and 1-D engineering tool, are validated and synthesized with experimental results for gravity dominated flows inside vertical tube and inclined channel; and, also, for shear/pressure driven flows inside horizontal channels. Furthermore, these simulation tools are employed to demonstrate key differences of physics between gravity dominated and shear/pressure driven flows. A transition map that distinguishes shear driven, gravity driven, and “mixed” driven flow zones within the non-dimensional parameter space that govern these duct flows is presented along with the film thickness and heat transfer correlations that are valid in these zones. It has also been shown that internal condensing flows in a micro-meter scale duct experiences shear driven flow, even in different gravitational environments. The full 2-D steady computational tool has been employed to investigate the length of annularity. The result for a shear driven flow in a horizontal channel shows that in absence of any noise or pressure fluctuation at the inlet, the onset of non-annularity is partly due to insufficient shear at the liquid-vapor interface. This result is being further corroborated/investigated by R. R. Naik with the help of the unsteady simulation tool. The condensing flow results and flow physics understanding developed through these simulation tools will be instrumental in reliable design of modern micro-scale and spacebased thermal systems.

Characterization of thermal and mechanical properties of polypropylene-based composites for fuel cell bipolar plates and development of educational tools in hydrogen and fuel cell technologies

In this project we developed conductive thermoplastic resins by adding varying amounts of three different carbon fillers: carbon black (CB), synthetic graphite (SG) and multi-walled carbon nanotubes (CNT) to a polypropylene matrix for application as fuel cell bipolar plates. This component of fuel cells provides mechanical support to the stack, circulates the gases that participate in the electrochemical reaction within the fuel cell and allows for removal of the excess heat from the system. The materials fabricated in this work were tested to determine their mechanical and thermal properties. These materials were produced by adding varying amounts of single carbon fillers to a polypropylene matrix (2.5 to 15 wt.% Ketjenblack EC-600 JD carbon black, 10 to 80 wt.% Asbury Carbon's Thermocarb TC-300 synthetic graphite, and 2.5 to 15 wt.% of Hyperion Catalysis International's FIBRILTM multi-walled carbon nanotubes) In addition, composite materials containing combinations of these three fillers were produced. The thermal conductivity results showed an increase in both through-plane and in-plane thermal conductivities, with the largest increase observed for synthetic graphite. The Department of Energy (DOE) had previously set a thermal conductivity goal of 20 W/m·K, which was surpassed by formulations containing 75 wt.% and 80 wt.% SG, yielding in-plane thermal conductivity values of 24.4 W/m·K and 33.6 W/m·K, respectively. In addition, composites containing 2.5 wt.% CB, 65 wt.% SG, and 6 wt.% CNT in PP had an in–plane thermal conductivity of 37 W/m·K. Flexural and tensile tests were conducted. All composite formulations exceeded the flexural strength target of 25 MPa set by DOE. The tensile and flexural modulus of the composites increased with higher concentration of carbon fillers. Carbon black and synthetic graphite caused a decrease in the tensile and flexural strengths of the composites. However, carbon nanotubes increased the composite tensile and flexural strengths. Mathematical models were applied to estimate through-plane and in-plane thermal conductivities of single and multiple filler formulations, and tensile modulus of single-filler formulations. For thermal conductivity, Nielsen's model yielded accurate thermal conductivity values when compared to experimental results obtained through the Flash method. For prediction of tensile modulus Nielsen's model yielded the smallest error between the predicted and experimental values. The second part of this project consisted of the development of a curriculum in Fuel Cell and Hydrogen Technologies to address different educational barriers identified by the Department of Energy. By the creation of new courses and enterprise programs in the areas of fuel cells and the use of hydrogen as an energy carrier, we introduced engineering students to the new technologies, policies and challenges present with this alternative energy. Feedback provided by students participating in these courses and enterprise programs indicate positive acceptance of the different educational tools. Results obtained from a survey applied to students after participating in these courses showed an increase in the knowledge and awareness of energy fundamentals, which indicates the modules developed in this project are effective in introducing students to alternative energy sources.

Comparison of the effects of inquiry-based cooperative learning and demonstrations in science education

The reported research project involved studying how teaching science using demonstrations, inquiry-based cooperative learning groups, or a combination of the two methods affected sixth grade students’ understanding of air pressure and density. Three different groups of students were each taught the two units using different teaching methods. Group one learned about the topics through both demonstrations and inquirybased cooperative learning, whereas group two only viewed demonstrations, and group three only participated in inquiry-based learning in cooperative learning groups. The study was designed to answer the following two questions: 1. Which teaching strategy works best for supporting student understanding of air pressure and density: demonstrations, inquirybased labs in cooperative learning groups, or a combination of the two? 2. And what effect does the time spent engaging in a particular learning experience (demonstrations or labs) have on student learning? Overall, the data did not provide sufficient evidence that one method of learning was more effective than the others. The results also suggested that spending more time on a unit does not necessarily equate to a better understanding of the concepts by the students. Implications for science instruction are discussed.