Effect of ultrasonic ecxitation on the ultimate tensili strength of glass ionomer cements after different water storage times

The application of ultrasound waves with a conventional dental ultrasonic scaler on glass ionomer cements surface accelerated initial setting reaction and improved the mechanical properties. Objective: This study evaluated the ultimate tensile strength of glass ionomer cements after ultrasonic excitation and different water storage times. Material and method: Twelve specimens of each material (Fuji IX GP, Ketac Molar Easymix and Vitremer) were prepared, and six of each received a 30-second ultrasound application during initial setting of the cements. After storage of the 24 hours or 30 days, the specimens were sectioned into stick to microtensile testing and the mean ultimate tensile strength values were submitted to Welch’s ANOVA and Tamhane’s test. Result: The results showed that the Vitremer presented the highest mean tensile strength. The chemically set Fuji IX GP presented significantly higher mean tensile strength after 30 days than after 24 hours of storage (p < 0.05). At 24 hours, the ultrasonically set Fuji IX GP presented significantly higher mean tensile strength than their counterparts set under standard conditions (p < 0.05). Conclusion: Treatment with ultrasound increased the tensile strength of Fuji IX GP in the early period of maturation.

Degradação de forças dos elasticos intermaxilares ortodônticos sintéticos

This study aimed to evaluate the force degradation of synthetic elastics over time using dynamic biomechanical tests in order to find clinical parameters of what size of elastic and frequency of exchange should be used in orthodontic therapy. It was used 240 elastics of Dental Morelli, sizes 1/8", 3/16", 1/4 "and 5/16", medium force, divided in four groups. In each group was measured forces at different times, from immediate to 72 hours after immersion in water at 37°C and incubated stretched to 600% of its initial inner diameter. Tensile tests were performed on a universal testing machine EMIC DL2000 submerged in distilled water maintained at 37°C. Data were analyzed using SPSS version 16.0, by the Analysis of Variance (One-Way) with Tukey´s post test. There was a greater increase in pattern of force decay of immediate measurement until 24 hours in all sizes of synthetic elastics, from which it was observed a decrease in force progressively smaller, with the exception of 5/16´´ elastic with a maximum force decay occurred at 12h. It was concluded that: the elastic synthetic Dental Morelli suffered significant force degradation over time, with reduction of approximately 70% of the initial force during 24 hours of stretching, followed by a progressively smaller decrease; the amount of stretch for a ideal force in intermaxillary therapies depends on the distance between the points of attachment of elastic, being necessary to consult the tables to choose the size, force and frequency of replacement.

Search for long-lived particles that decay into final states containing two electrons or two muons in proton-proton collisions at root s=8Tev

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Decay constants of the pion and its excitations in holographic QCD

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A dissipative Fermi-Ulam model under two different kinds of dissipation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Study of Z production in PbPb and pp collisions at root s(NN)=2.76 TeV in the dimuon and dielectron decay channels

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Observation of the rare B-s(0)->mu(+)mu(-) decay from the combined analysis of CMS and LHCb data

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Photoelectrochemical properties of FTO/p-NiO electrode induced by UV light irradiation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Quantum Discord for d circle times 2 Systems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nonmesonic weak decay dynamics from proton spectra of Lambda-hypernuclei

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Andropogon grass consortium with stylo in two times: the forage response and sources of phosphorus rates

The use of legumes intercropped with forage in the Brazilian savannah (Cerrado) region is an alternative to reverse the process of pasture degradation. The natural phosphorus deficiency in this region and the high retention capacity of this nutrient in the soil are factors that directly affect the sustainability of the production system. The objective of this study was to evaluate the effect of a phosphate with medium solubility (Arad) compared to more soluble sources such as triple superphosphate and mono-ammonium phosphate, on the formation and maintenance of pastures of Andropogon gayanus with or without the introduction of Stylosantes guianensis in pasture already established in the Brazilian savannah. Two experiments were carried out under field conditions in an Oxisol using a randomized block design with split plots, plots with two sources of phosphorus (Arad and super-triple or MAP) and subplots with different levels of phosphorus. The study showed that andropogon grass, even though characterised as forage requiring low fertilization, responded to increased fertilization, especially with the use of more soluble sources of P at planting. From the second year on, with the introduction of Stylosantes guianensis, verified effects were seen on legumes in their efficiency of utilization of residual fertilization from the first year; however, this didn't affect legume dry matter production resulting from the P sources used for the andropogon grass. The mixed stands of andropogon grass and Stylosantes guianensis made it more advantageous to increase the P sources using phosphate fertilizer with lower solubility (Arad), when compared to MAP.

Identification techniques for highly boosted W bosons that decay into hadrons

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

QCD sum rules calculation of heavy Λ semileptonic decay

We set up sum rules for heavy lambda decays in a full QCD calculation which in the heavy quark mass limit incorporates the symmetries of heavy quark effective theory. For the semileptonic Λc decay we obtain a reasonable agreement with experiment. For the Λb semileptonic decay we find at the zero recoil point a violation of the heavy quark symmetry of about 20%. © 1998 Published by Elsevier Science B.V. All rights reserved.

Constraining the absolute neutrino mass scale and Majorana CP violating phases by future 0νββ decay experiments

Assuming that neutrinos are Majorana particles, in a three-generation framework, current and future neutrino oscillation experiments can determine six out of the nine parameters which fully describe the structure of the neutrino mass matrix. We try to clarify the interplay among the remaining parameters, the absolute neutrino mass scale and two CP violating Majorana phases, and how they can be accessed by future neutrinoless double beta (0vυββ) decay experiments, for the normal as well as for the inverted order of the neutrino mass spectrum. Assuming the oscillation parameters to be in the range presently allowed by atmospheric, solar, reactor, and accelerator neutrino experiments, we quantitatively estimate the bounds on m 0, the lightest neutrino mass, that can be inferred if the next generation 0υββ decay experiments can probe the effective Majorana mass (m ee) down to ∼1 meV. In this context we conclude that in the case that neutrinos are Majorana particles, (a) if m 0≳300 meV, i.e., within the range directly attainable by future laboratory experiments as well as astrophysical observations, then m ee≳30 meV must be observed, (b) if m 0 ≤ 300 meV, results from future 0υββ decay experiments combined with stringent bounds on the neutrino oscillation parameters, especially the solar ones, will place much stronger limits on the allowed values of m 0 than these direct experiments. For instance, if a positive signal is observed around m ee = 10 meV, we estimate 3≲m 0/meV≲65 at 95% C.L.; on the other hand, if no signal is observed down to m ee = 10 meV, then m 0≲55 meV at 95% C.L.

Heavy λ semileptonic decay: A QCD sum rule approach

In this work we calculate the form factors of the Lambda(c) and Lambda(b) semileptonic decay using the QCD sum rules approach. We found that the form factors sum rules are more stable than the respective mass sum rules, and we get a decay rate for Lambda(c) compatible with experiment.