Effect of F- ions on physical and spectroscopic properties of Yb3+-doped TeO2-based glasses

The effects of F- ions on physical and spectroscopic properties of the Yb3+ in tellurite glass system are investigated. The results show that the glass system takes on good thermal stability with the content of ZnF2 lower than 15 mol%, both the emission cross-section and the fluorescence lifetime of Yb3+ ions increase evidently which indicate that such oxyfluoride tellurite glass system is a promising laser host matrix for high power generation. FT-IR spectra were used to analyze the effect of F- ions on the structure of tellurite glasses and OH- groups in this glass system. Analysis demonstrates that addition of fluoride decreases the symmetry of the structure of tellurite glasses which increases the emission cross-section and removes the OH- groups, and which improves the measured fluorescence lifetime of Yb3+ ions. (c) 2004 Elsevier B.V. All rights reserved.

Effect of Al(PO3)(3) content on physical, chemical and optical properties of fluorophosphate glasses for 2 mu m application

The effect of Al(PO3)(3) content on physical, chemical and optical properties of fluorophosphate glasses for 2 mu m application, such as thermal stability, chemical durability, surface hardness, absorption spectra and emission spectra, is investigated. With the increment of Al(PO3)(3) content, the thermal stability characterized by the gap of T-g and T,, increases first and then decreases, and reaches the maximum level containing 5 mol% Al(PO3)(3) content. The density and chemical durability decrease monotonously with the introduction of Al(PO3)(3) content increasing, while the refractive index and surface hardness increase. Above properties of fluorophosphate glasses are also compared with fluoride glasses and phosphate glasses. The Judd-Ofelt parameters, absorption and emission cross sections are discussed based on the absorption spectra of Tm-doped glasses. The emission spectra are also measured and the 1.8 mu m fluorescence of the sample is obvious indicating that it is suitable to 2 mu m application. (c) 2008 Elsevier B.V. All rights reserved.

Observational constraints on the unified dark matter and dark energy model based on the quark bag model

In this work we investigate if a small fraction of quarks and gluons, which escaped hadronization and survived as a uniformly spread perfect fluid, can play the role of both dark matter and dark energy. This fluid, as developed in [1], is characterized by two main parameters: beta, related to the amount of quarks and gluons which act as dark matter; and gamma, acting as the cosmological constant. We explore the feasibility of this model at cosmological scales using data from type Ia Supernovae (SNeIa), Long Gamma-Ray Bursts (LGRB) and direct observational Hubble data. We find that: (i) in general, beta cannot be constrained by SNeIa data nor by LGRB or H(z) data; (ii) gamma can be constrained quite well by all three data sets, contributing with approximate to 78% to the energy matter content; (iii) when a strong prior on (only) baryonic matter is assumed, the two parameters of the model are constrained successfully. (C) 2014 The Authors. Published by Elsevier B.V.

Ontologia de notícias: um modelo para classificação do conteúdo dos jornais on-line brasileiros, segundo a lógica da Web Semântica

Este trabalho tem por objetivo propor um modelo de ontologia simples e generalista, capaz de descrever os conceitos mais básicos que permeiam o domínio de conhecimento dos jornais on-line brasileiros não especializados, fundamentado tanto na prática quanto conceitualmente, em conformidade com os princípios da Web Semântica. A partir de uma nova forma de classificação e organização do conteúdo, a ontologia proposta deve ter condições de atender as necessidades comuns de ambas as partes, jornal e leitor, que são, resumidamente, a busca e a recuperação das informações.

Thermal stability and crystallochemical analysis for CoII based coordination polymers with TPP and TPPS porphyrins

Artículo CrystEngComm 2013

A formalism based on moments for classical and quantum cosmology

Spanish Relativity Meeting (ERE 2014) Valencia, SPAIN, SEP 01-05, 2014

Surimi based dried fish cake

Minced fish prepared from the fillets of the sciaenid fish (Lutjanus sp.) was washed with cold water (<10 °C) three times. The washed muscle was pressed through a piece of fine cloth to a moisture content around 80%. The pressed cake (Surimi) was ground with 2.5% sodium chloride and 3% tapioca starch. The mixed material was shaped in the form of a cake and left for one hour for the gel to set. The cakes were then steamed. The cooled cakes were cut into pieces of 1 cm length x 1 cm width x 0.5 cm thick. The pieces were either dried in an electrical oven at 50°C or dried in sun to a moisture content of 11-12%. Biochemical, bacteriological and organoleptic evaluation revealed that the cakes were in very good acceptable form for 8 months. The cakes could be rehydrated by soaking in water at ambient temperature for half an hour and boiling in water for 10 minutes.

Spoken document representations for probabilistic retrieval

This paper presents some developments in query expansion and document representation of our spoken document retrieval system and shows how various retrieval techniques affect performance for different sets of transcriptions derived from a common speech source. Modifications of the document representation are used, which combine several techniques for query expansion, knowledge-based on one hand and statistics-based on the other. Taken together, these techniques can improve Average Precision by over 19% relative to a system similar to that which we presented at TREC-7. These new experiments have also confirmed that the degradation of Average Precision due to a word error rate (WER) of 25% is quite small (3.7% relative) and can be reduced to almost zero (0.2% relative). The overall improvement of the retrieval system can also be observed for seven different sets of transcriptions from different recognition engines with a WER ranging from 24.8% to 61.5%. We hope to repeat these experiments when larger document collections become available, in order to evaluate the scalability of these techniques.

Comparison of stabilised/solidified mixes of model drill cuttings based on the North Sea and Red Sea Areas

Following the global stringent legislations regulating the wastes generated from the drilling process of oil exploration and production activities, the management of hazardous drill cuttings has become one of the pressing needs confronting the petroleum industry. Most of the prevalent treatment techniques adopted by oil companies are extremely expensive and/or the treated product has to be landfilled without any potential end-use; thereby rendering these solutions unsustainable. The technique of stabilisation/solidification is being investigated in this research to treat drill cuttings prior to landfilling or for potential re-use in construction products. Two case studies were explored namely North Sea and Red Sea. Given the known difficulties with stabilising/solidifying oils and chlorides, this research made use of model drill cutting mixes based on typical drill cutting from the two case studies, which contained 4.2% and 10.95% average concentrations of hydrocarbons; and 2.03% and 2.13% of chlorides, by weight respectively. A number of different binders, including a range of conventional viz. Portland cement (PC) as well as less-conventional viz. zeolite, or waste binders viz. cement kiln dust (CKD), fly ash and compost were tested to assess their ability to treat the North Sea and Red Sea model drill cuttings. The dry binder content by weight was 10%, 20% and 30%. In addition, raw drill cuttings from one of the North Sea offshore rigs were stabilised/solidified using 30% PC. The characteristics of the final stabilised/solidified product were finally compared to those of thermally treated cuttings. The effectiveness of the treatment using the different binder systems was compared in the light of the aforementioned two contaminants only. A set of physical tests (unconfined compressive strength (UCS)), chemical tests (NRA leachability) and micro-structural examinations (using scanning electron microscopy (SEM), and X-ray diffraction (XRD)) were used to evaluate the relative performance of the different binder mixes in treating the drill cuttings. The results showed that the observed UCS covered a wide range of values indicating various feasible end-use scenarios for the treated cuttings within the construction industry. The teachability results showed the reduction of the model drill cuttings to a stable non-reactive hazardous waste, compliant with the UK acceptance criteria for non-hazardous landfills: (a) by most of the 30% and 20% binders for chloride concentrations, and (b) by the 20% and 30% of compost-PC and CKD-PC binders for the Red Sea cuttings. The 20% and 30% compost-PC and CKD-PC binders successfully reduced the leached oil concentration of the North Sea cuttings to inert levels. Copyright 2007, Society of Petroleum Engineers.

HACCP based management system for improving quality of freshwater giant prawn, Macrobrachium rosenbergii

The study was conducted on the present status of HACCP based quality management system of golda, Macrobrachium rosenbergii farms in Fulpur region of Mymensingh. Information was collected on general condition of farms, culture systems and post-harvest quality management. In almost all farms, there is no or inadequate infrastructure facilities such as, road access, electric supply, telecommunications, ice, feed storage facility, vehicle for golda transportation, washing and toilet facilities. The problems associated with sanitation and hygiene was: widespread use of cow dung, poultry manure and construction of open toilet within the vicinity of prawn culture pond. Different grades of commercially available and locally prepared feeds were used for golda culture in the pond. Golda post-larvae (PL) of 40-50 days old were stocked with carp species. The price of golda PL ranged from Tk. 1.00 to Tk. 1.25/piece. The pond size varied from 50 decimal (0.2 ha) to 2.5 acre (1.0 ha) with an average depth of 2-2.5 m. The culture period of golda varied from April-May to November-December and survival rate ranged between 75 and 80%. Production of golda varied from 250-500 kg/acre (625-1,250 kg/ha). Harvested golda were transported to city market within 4 h. Two size grading were generally followed during pricing, e.g. Tk. 500 to 550/kg for >100 g size and Tk. 300/kg for <100 g size. The cost-benefit ratio was found to remain around 1:1.25 depending on availability of PL. Water quality parameters such as, water temperature, pH, dissolved oxygen, total alkalinity and chlorophyll a in five golda farms in Fulpur region were monitored. Water temperature ranged from 29°C to 33°C, dissolved oxygen from 2.28 to 4.13 mg/l, pH between 6.65 and 7.94, alkalinity from 44 to 70 mg/l and chlorophyll a concentration from 61.88 to 102.34 µg/l in the five investigated ponds. The Aerobic Plate Count (APC) of the water sample was within the range of 2.0x10^6 - 2.96x10^7 CFU/ml and of soil samples within the range of 6.9x10^6 - 7.73x10^6 CFU/g. Streptococcus sp., Bacillus sp., Escherichia coli, Staphylococcus sp., Pseudomonas sp. and Salmonella sp. were isolated from pond water and sediment. Different feed samples used for golda was analyzed for proximate composition. Moisture content ranged around 14.14-21.22%, crude protein 20.55-44.1%, lipid 4.67-12.54% and ash 9.7-27.69%. The TVB-N values and peroxide values of feeds used as starter, grower and fish meal were found within the acceptable ranges and samples were free from pathogenic organisms. A training was organized for the golda farmers on HACCP, water quality and post-harvest quality management of prawn.

Phylogeny and evolution of the Drosophila nasuta subgroup based on mitochondrial ND4 and ND4L gene sequences

The sequences of the mitochondrial ND4 gene (1339 bp) and the ND4L gene (290 bp) were determined for all the 14 extant taxa of the Drosophila nasuta subgroup The average A + T content of ND4 genes is 76.5% and that of ND4L genes is 83.5%. A total of 114 variable sites were scored. The ND4 gene sequence divergence ranged from 0 to 5.4% within the subgroup. The substitution rate of the ND4 gene is about 1.25% per million years. The base substitution of the genesis strongly transition biased. Neighbor-joining and parsimony were used to construct a phylogeny based on the resultant sequence data set. According to these trees, five, distinct mtDNA clades can be identified. D. niveifrons represents the most diverged lineage. D, sulfurigaster bilimbata and D. kepulauana form two independent lineages. The other two clades are the kohkoa complex and the albomicans complex. The Kohkoa complex consists of D. sulfurigaster sulfurigaster, D. pulaua, D. kohkoa, and Taxon-F. The albomicans complex can be divided into two groups: D. nasuta, D. sulfurigaster neonasuta, D. sulfurigaster albostrigata, and D.. albomicans from Chiangmai form one group; and D. pallidifrons, Taxon-I, Taxon-J, and D. albomicans from China form the other group. High genetic differentiation was found among D. albomicans populations. Based on our phylogenetic results, we hypothesize that D. niveifrons diverged first from the D, nasuta subgroup in Papua New Guinea about 3.5 Mya. The ancestral population spread to the north and when it reached Borneo, it diversified sequentially into the kohkoa complex, D. s. bilimbata, and D. kepulauana. About 1 Mya, another radiation occurred when the ancestral populations reached the Indo-China Peninsula, forming the albomicans complex. Discrepancy between morphological groupings and phylogenetic results suggests that the male morphological traits may not be orthologous. (C) 1999 Academic Press.

Fish farm technology. 1 - Brackishwater fish culture based on "aquafeed"

A method has been evolved to enhance the production of natural feed in brackish water fish farms by providing substrates for bio-growth ('aquafeed' production) which is a biomass complex consisting of sedentary and associated organisms of plant and animal species. The seasonal fluctuations of the aquafeed production over different substrates ranged as: 787-1830g/coconut leaf (6m²)/45 days, 16.0-072.9g/glass panel (2x10x10cm²)/30 days, 52-230g/nylon mat (2x25x25cm²)/30 days and 18.6-123.1g/wooden block (6x10x10cm²)/30 days. The average dry weight composition of the major components of aquafeed obtained in the present study was sand-silt-clay 40%, protein 22%, carbohydrate (water soluble) 1.8% and fat 3.35% (water content 85%). Mugil cephalus of 1.85 cm reared in a 0.01ha pond and fed on aquafeed attained a size of 23 cm length and 146.73g weight during one year. Survival rate was 54% at a density of 1000/ha. Salinity and temperature of the pond during the culture period ranged between 1.4 and 32.8‰ and 28.1 and 36.5°C respectively.

Analogical reasoning in case-based design

A computer can assist the process of design by analogy by recording past designs. The experience these represent could be much wider than that of designers using the system, who therefore need to identify potential cases of interest. If the computer assists with this lookup, the designers can concentrate on the more interesting aspect of extracting and using the ideas which are found. However, as the knowledge base grows it becomes ever harder to find relevant cases using a keyword indexing scheme without knowing precisely what to look for. Therefore a more flexible searching system is needed.

If a similarity measure can be defined for the features of the designs, then it is possible to match and cluster them. Using a simple measure like co-occurrence of features within a particular case would allow this to happen without human intervention, which is tedious and time- consuming. Any knowledge that is acquired about how features are related to each other will be very shallow: it is not intended as a cognitive model for how humans understand, learn, or retrieve information, but more an attempt to make effective, efficient use of the information available. The question remains of whether such shallow knowledge is sufficient for the task.

A system to retrieve information from a large database is described. It uses co-occurrences to relate keywords to each other, and then extends search queries with similar words. This seems to make relevant material more accessible, providing hope that this retrieval technique can be applied to a broader knowledge base.

The retrieval of structured design rationale for the re-use of design knowledge with an integrated representation

Design knowledge can be acquired from various sources and generally requires an integrated representation for its effective and efficient re-use. Though knowledge about products and processes can illustrate the solutions created (know-what) and the courses of actions (know-how) involved in their creation, the reasoning process (know-why) underlying the solutions and actions is still needed for an integrated representation of design knowledge. Design rationale is an effective way of capturing that missing part, since it records the issues addressed, the options considered, and the arguments used when specific design solutions are created and evaluated. Apart from the need for an integrated representation, effective retrieval methods are also of great importance for the re-use of design knowledge, as the knowledge involved in designing complex products can be huge. Developing methods for the retrieval of design rationale is very useful as part of the effective management of design knowledge, for the following reasons. Firstly, design engineers tend to want to consider issues and solutions before looking at solid models or process specifications in detail. Secondly, design rationale is mainly described using text, which often embodies much relevant design knowledge. Last but not least, design rationale is generally captured by identifying elements and their dependencies, i.e. in a structured way which opens the opportunity for going beyond simple keyword-based searching. In this paper, the management of design rationale for the re-use of design knowledge is presented. The retrieval of design rationale records in particular is discussed in detail. As evidenced in the development and evaluation, the methods proposed are useful for the re-use of design knowledge and can be generalised to be used for the retrieval of other kinds of structured design knowledge. © 2012 Elsevier Ltd. All rights reserved.

Automated On-Site Retrieval of Project Information

Among several others, the on-site inspection process is mainly concerned with finding the right design and specifications information needed to inspect each newly constructed segment or element. While inspecting steel erection, for example, inspectors need to locate the right drawings for each member and the corresponding specifications sections that describe the allowable deviations in placement among others. These information seeking tasks are highly monotonous, time consuming and often erroneous, due to the high similarity of drawings and constructed elements and the abundance of information involved which can confuse the inspector. To address this problem, this paper presents the first steps of research that is investigating the requirements of an automated computer vision-based approach to automatically identify “as-built” information and use it to retrieve “as-designed” project information for field construction, inspection, and maintenance tasks. Under this approach, a visual pattern recognition model was developed that aims to allow automatic identification of construction entities and materials visible in the camera’s field of view at a given time and location, and automatic retrieval of relevant design and specifications information.