Dual Z-source inverter with three-level reduced common-mode switching

This paper presents the design of a dual Z-source inverter that can be used with either a single dc source or two isolated dc sources. Unlike traditional inverters, the integration of a properly designed Z-source network and semiconductor switches to the proposed dual inverter allows buck-boost power conversion to be performed over a wide modulation range, with three-level output waveforms generated. The connection of an additional transformer to the inverter ac output also allows all generic wye-or delta-connected loads with three-wire or four-wire configuration to be supplied by the inverter. Modulationwise, the dual inverter can be controlled using a carefully designed carrier-based pulsewidth-modulation (PWM) scheme that will always ensure balanced voltage boosting of the Z-source network while simultaneously achieving reduced common-mode switching. Because of the omission of dead-time delays in the dual-inverter PWM scheme, its switched common-mode voltage can be completely eliminated, unlike in traditional inverters, where narrow common-mode spikes are still generated. Under semiconductor failure conditions, the presented PWM schemes can easily be modified to allow the inverter to operate without interruption, and for cases where two isolated sources are used, zero common-mode voltage can still be ensured. These theoretical findings, together with the inverter practicality, have been confirmed in simulations both using PSIM with Matlab/Simulink coupler and experimentally using a laboratory-implemented inverter prototype.

Gelatine

A Social Public Display to Facilitate Shared Encounters in Coworking Spaces The idea behind ‘Gelatine’ is a system that facilitates shared encounters between coworkers and library users by allowing them to digitally ‘check in’ at a work space. Gelatine displays skills, areas of interest, and needs of currently present coworkers on a public screen. The system provides an online / mobile website for users to create a personal profile with keywords (‘tags’) that describe their skills, areas of interests, as well as areas that they have a problem in or want to learn more about. This profile information is linked to their RFID membership card, which they can swipe at one of the ‘checkin-points’ at the entrance or specific sub locations such as individual desks or coffee kiosk to confirm their presence in the space.

BIM, specifications and cost planning: establishing the connections

The overarching research work is based on two approaches: - Conceptual Analysis, Extraction and Linking - Experimentation with Product Libraries - Conceptual Analysis, Extraction and Linking: This aspect of the research has been achieved through the development of a conceptual framework for facilitating the understanding of the constituting components of BIM, Specifications and Cost Planning under investigation. The framework builds on theories spanning the constituent research themes and was used as a basis for justifying the elected approaches adopted throughout the research work. By means of tags and codes, a system for classifying building specification information has been developed as a differentiator between the chosen research approach and existing classification strategies in industry. Furthermore, syntactic links between extracted classes of specification information and cost planning have been established and will be adopted as a basis for authenticating the impact of specification information within BIM models. - Experimentation with Product Libraries Following the extraction and classification of BIM, Specifications and Cost Planning information, early experimentation on linking specifications to BIM models by means of a raas-based product library have been successful. A comparative analysis between a range of existing product libraries has also been realised. The outcomes have been amply documented in papers, all of which have received positive reviews. Ongoing experiments and analysis with the product library involve integrating the cost planning component for authenticating the completeness, relevance and impact of embedded specification within BIM models.

A tag-based personalized item recommendation system using tensor modeling and topic model approaches

This research falls in the area of enhancing the quality of tag-based item recommendation systems. It aims to achieve this by employing a multi-dimensional user profile approach and by analyzing the semantic aspects of tags. Tag-based recommender systems have two characteristics that need to be carefully studied in order to build a reliable system. Firstly, the multi-dimensional correlation, called as tag assignment , should be appropriately modelled in order to create the user profiles [1]. Secondly, the semantics behind the tags should be considered properly as the flexibility with their design can cause semantic problems such as synonymy and polysemy [2]. This research proposes to address these two challenges for building a tag-based item recommendation system by employing tensor modeling as the multi-dimensional user profile approach, and the topic model as the semantic analysis approach. The first objective is to optimize the tensor model reconstruction and to improve the model performance in generating quality rec-ommendation. A novel Tensor-based Recommendation using Probabilistic Ranking (TRPR) method [3] has been developed. Results show this method to be scalable for large datasets and outperforming the benchmarking methods in terms of accuracy. The memory efficient loop implements the n-mode block-striped (matrix) product for tensor reconstruction as an approximation of the initial tensor. The probabilistic ranking calculates the probabil-ity of users to select candidate items using their tag preference list based on the entries generated from the reconstructed tensor. The second objective is to analyse the tag semantics and utilize the outcome in building the tensor model. This research proposes to investigate the problem using topic model approach to keep the tags nature as the “social vocabulary” [4]. For the tag assignment data, topics can be generated from the occurrences of tags given for an item. However there is only limited amount of tags availa-ble to represent items as collection of topics, since an item might have only been tagged by using several tags. Consequently, the generated topics might not able to represent the items appropriately. Furthermore, given that each tag can belong to any topics with various probability scores, the occurrence of tags cannot simply be mapped by the topics to build the tensor model. A standard weighting technique will not appropriately calculate the value of tagging activity since it will define the context of an item using a tag instead of a topic.

Mechanical bending properties of sodium titanate (Na2Ti3O7) nanowires

We report on the mechanical properties of sodium titanate nanowires (Na2Ti3O7 NW) through a combination of bending experiments and theoretical analysis. Na2Ti3O7 NWs with lateral dimensions ranging from 20–700 nm were synthesized by a hydrothermal approach. A focused ion beam (FIB) was used to manipulate the selected Na2Ti3O7 NW over a hole drilled in an indium tin oxide substrate. After welding the nanowire, a series of bending tests was performed. It was observed that the Na2Ti3O7 NW exhibits a brittle behavior, and a nonlinear elastic deformation was observed before failure. By using the modified Euler–Bernoulli beam theory, such nonlinear elastic deformation is found to originate from a combination of surface effects and axial elongation (arising from the bending deformation). The effective Young's modulus of the Na2Ti3O7 NW was found to be independent of the wire length, and ranges from 21.4 GPa to 45.5 GPa, with an average value of 33 ± 7 GPa. The yield strength of the Na2Ti3O7 NW is measured at 2.7 ± 0.7 GPa.

An efficient tagging data interpretation and representation scheme for item recommendation

A tag-based item recommendation method generates an ordered list of items, likely interesting to a particular user, using the users past tagging behaviour. However, the users tagging behaviour varies in different tagging systems. A potential problem in generating quality recommendation is how to build user profiles, that interprets user behaviour to be effectively used, in recommendation models. Generally, the recommendation methods are made to work with specific types of user profiles, and may not work well with different datasets. In this paper, we investigate several tagging data interpretation and representation schemes that can lead to building an effective user profile. We discuss the various benefits a scheme brings to a recommendation method by highlighting the representative features of user tagging behaviours on a specific dataset. Empirical analysis shows that each interpretation scheme forms a distinct data representation which eventually affects the recommendation result. Results on various datasets show that an interpretation scheme should be selected based on the dominant usage in the tagging data (i.e. either higher amount of tags or higher amount of items present). The usage represents the characteristic of user tagging behaviour in the system. The results also demonstrate how the scheme is able to address the cold-start user problem.

Coding livecoding

Livecoding is an artistic programming practice in which an artist's low-level interaction can be observed with sufficiently high fidelity to allow for transcription and analysis. This paper presents the first reported" coding" of livecoding videos. From an identified corpus of videos available on the web, we coded performances of two different livecoding artists, recording both the (textual) programming edit events and the musical effect of these edits.

Design of high mobility DPP-based polymer semiconductors for organic thin film transistors

π-Conjugated polymers are the most promising semiconductor materials to enable printed organic thin film transistors (OTFTs) due to their excellent solution processability and mechanical robustness. However, solution-processed polymer semiconductors have shown poor charge transport properties mainly originated from the disordered polymer chain packing in the solid state as compared to the thermally evaporated small molecular organic semiconductors. The low charge carrier mobility, typically < 0.1 cm2 /V.s, of polymer semiconductors poses a challenge for most intended applications such as displays and radio-frequency identification (RFID) tags. Here we present our recent results on the dike topyrrolopyrrole (DPP)-based polymers and demonstrate that when DPP is combined with appropriate electron donating moieties such as thiophene and thienothiophene, very high charge carrier mobility values of ~1 cm2/V.s could be achieved.

Decision support for the efficient annotation of bioacoustic events

Acoustic sensors allow scientists to scale environmental monitoring over large spatiotemporal scales. The faunal vocalisations captured by these sensors can answer ecological questions, however, identifying these vocalisations within recorded audio is difficult: automatic recognition is currently intractable and manual recognition is slow and error prone. In this paper, a semi-automated approach to call recognition is presented. An automated decision support tool is tested that assists users in the manual annotation process. The respective strengths of human and computer analysis are used to complement one another. The tool recommends the species of an unknown vocalisation and thereby minimises the need for the memorization of a large corpus of vocalisations. In the case of a folksonomic tagging system, recommending species tags also minimises the proliferation of redundant tag categories. We describe two algorithms: (1) a “naïve” decision support tool (16%–64% sensitivity) with efficiency of O(n) but which becomes unscalable as more data is added and (2) a scalable alternative with 48% sensitivity and an efficiency ofO(log n). The improved algorithm was also tested in a HTML-based annotation prototype. The result of this work is a decision support tool for annotating faunal acoustic events that may be utilised by other bioacoustics projects.

Causal factors of hot air ballooning incidents : identification, frequency, and potential impact

Background: Hot air ballooning incidents are relatively rare, however, when they do occur they are likely to result in a fatality or serious injury. Human error is commonly attributed as the cause of hot air ballooning incidents; however, error in itself is not an explanation for safety failures. This research aims to identify, and establish the relative importance of factors contributing towards hot air ballooning incidents. Methods: Twenty-two Australian Ballooning Federation (ABF) incident reports were thematically coded using a bottom up approach to identify causal factors. Subsequently, 69 balloonists (mean 19.51 years’ experience) participated in a survey to identify additional causal factors and rate (out of seven) the perceived frequency and potential impact to ballooning operations of each of the previously identified causal factors. Perceived associated risk was calculated by multiplying mean perceived frequency and impact ratings. Results: Incident report coding identified 54 causal factors within nine higher level areas: Attributes, Crew resource management, Equipment, Errors, Instructors, Organisational, Physical Environment, Regulatory body and Violations. Overall, ‘weather’, ‘inexperience’ and ‘poor/inappropriate decisions’ were rated as having greatest perceived associated risk. Discussion: Although errors were nominated as a prominent cause of hot air ballooning incidents, physical environment and personal attributes are also particularly important for safe hot air ballooning operations. In identifying a range of causal factors the areas of weakness surrounding ballooning operations have been defined; it is hoped that targeted safety and training strategies can now be put into place removing these contributing factors and reducing the chance of pilot error.

Fouling of waste heat recovery : numerical and experimental results

Numerical results are presented to investigate the performance of a partly-filled porous heat exchanger for waste heat recovery units. A parametric study was conducted to investigate the effects of inlet velocity and porous block height on the pressure drop of the heat exchanger. The focus of this work is on modelling the interface of a porous and non-porous region. As such, numerical simulation of the problem is conducted along with hot-wire measurements to better understand the physics of the problem. Results from the two sources are then compared to existing theoretical predictions available in the literature which are unable to predict the existence of two separation regions before and after the porous block. More interestingly, a non-uniform interface velocity was observed along the streamwise direction based on both numerical and experimental data.

How can principals enhance teacher job satisfaction and work commitment?

Teachers leave the teaching profession at different stages throughout their careers. When mid-career teachers leave the profession, there is a potential loss of experienced, quality staff. Increasingly principals have the responsibility for recruiting and keeping quality staff, which translates to responsibility for arresting the attrition rate. This paper reports on an ongoing study that investigates how school leadership may affect teacher job satisfaction in order to understand how principals can enhance teacher work commitment. This paper uses the domains of leadership identified in Education Queensland’s Leadership Matters Framework (2008) to compare school leaders’ and teachers’ perceptions about mid-career teachers’ leaving the profession. Five current principals and five ex-teachers participated in semi-structured, qualitative, individual interviews about which leadership practices impact on teacher work commitment. The ideas identified by each cohort were coded through a content analysis. The five domains of leadership (i.e., personal, relational, intellectual, organisational and educational leadership) provided an analytical framework. Both participant groups indicated relational leadership practices as the strongest influence on teacher work commitment. The relational skills, such as valuing staff, being approachable, being consistent with staff interactions, having good interpersonal skills and developing staff strengths, were noted to have specific impacts on teachers’ work commitment. There were significant differences between the groups, with the ex-teachers rating the personal leadership practices as the second most important practice that can influence teacher work commitment. In contrast, the principals felt that the organisational and education leadership practices were of next importance for teacher work commitment. The findings have implications for principal leadership professional learning. Improving relational skills may help school leaders to increase teacher work. Teacher attrition is a serious concern to many education jurisdictions and by understanding reasons for decline in commitment, jurisdictions can redress the negative impact of leadership practices and keep teachers committed and in the profession. However, further research needs to incorporate more participants through a quantitative study to validate connections with the qualitative findings presented in this current study.

Perceived barriers and facilitators to increasing physical activity among people with musculoskeletal disorders : a qualitative investigation to inform intervention development

Purpose Musculoskeletal conditions can impair people’s ability to undertake physical activity as they age. The purpose of this qualitative study was to investigate perceived barriers and facilitators to undertaking physical activity reported by patients accessing ambulatory hospital clinics for musculoskeletal disorders. Patients and methods A questionnaire with open-ended items was administered to patients (n=217, 73.3% of 296 eligible) from three clinics providing ambulatory services for nonsurgical treatment of musculoskeletal disorders. The survey included questions to capture the clinical and demographic characteristics of the sample. It also comprised two open-ended questions requiring qualitative responses. The first asked the participant to describe factors that made physical activity more difficult, and the second asked which factors made it easier for them to be physically active. Participants’ responses to the two open-ended questions were read, coded, and thematically analyzed independently by two researchers, with a third researcher available to arbitrate any unresolved disagreement. Results The mean (standard deviation) age of participants was 53 (15) years; n=113 (52.1%) were male. A total of 112 (51.6%) participants reported having three or more health conditions; n=140 (64.5%) were classified as overweight or obese. Five overarching themes describing perceived barriers for undertaking physical activity were "health conditions", "time restrictions", "poor physical condition", "emotional, social, and psychological barriers", and "access to exercise opportunities". Perceived physical activity facilitators were also aligned under five themes, namely "improved health state", "social, emotional, and behavioral supports", "access to exercise environment", "opportunities for physical activities", and "time availability". Conclusion It was clear from the breadth of the data that meaningful supports and interventions must be multidimensional. They should have the capacity to address a variety of physical, functional, social, psychological, motivational, environmental, lifestyle, and other perceived barriers. It would appear that for such interventions to be effective, they should be flexible enough to address a variety of specific concerns.

Global burden of disease attributable to mental and substance use disorders : findings from the Global Burden of Disease Study 2010

Background We used data from the Global Burden of Diseases, Injuries, and Risk Factors Study 2010 (GBD 2010) to estimate the burden of disease attributable to mental and substance use disorders in terms of disability-adjusted life years (DALYs), years of life lost to premature mortality (YLLs), and years lived with disability (YLDs). Methods For each of the 20 mental and substance use disorders included in GBD 2010, we systematically reviewed epidemiological data and used a Bayesian meta-regression tool, DisMod-MR, to model prevalence by age, sex, country, region, and year. We obtained disability weights from representative community surveys and an internet-based survey to calculate YLDs. We calculated premature mortality as YLLs from cause of death estimates for 1980–2010 for 20 age groups, both sexes, and 187 countries. We derived DALYs from the sum of YLDs and YLLs. We adjusted burden estimates for comorbidity and present them with 95% uncertainty intervals. Findings In 2010, mental and substance use disorders accounted for 183·9 million DALYs (95% UI 153·5 million–216·7 million), or 7·4% (6·2–8·6) of all DALYs worldwide. Such disorders accounted for 8·6 million YLLs (6·5 million–12·1 million; 0·5% [0·4–0·7] of all YLLs) and 175·3 million YLDs (144·5 million–207·8 million; 22·9% [18·6–27·2] of all YLDs). Mental and substance use disorders were the leading cause of YLDs worldwide. Depressive disorders accounted for 40·5% (31·7–49·2) of DALYs caused by mental and substance use disorders, with anxiety disorders accounting for 14·6% (11·2–18·4), illicit drug use disorders for 10·9% (8·9–13·2), alcohol use disorders for 9·6% (7·7–11·8), schizophrenia for 7·4% (5·0–9·8), bipolar disorder for 7·0% (4·4–10·3), pervasive developmental disorders for 4·2% (3·2–5·3), childhood behavioural disorders for 3·4% (2·2–4·7), and eating disorders for 1·2% (0·9–1·5). DALYs varied by age and sex, with the highest proportion of total DALYs occurring in people aged 10–29 years. The burden of mental and substance use disorders increased by 37·6% between 1990 and 2010, which for most disorders was driven by population growth and ageing. Interpretation Despite the apparently small contribution of YLLs—with deaths in people with mental disorders coded to the physical cause of death and suicide coded to the category of injuries under self-harm—our findings show the striking and growing challenge that these disorders pose for health systems in developed and developing regions. In view of the magnitude of their contribution, improvement in population health is only possible if countries make the prevention and treatment of mental and substance use disorders a public health priority.

On secure outsourcing of cryptographic computations to cloud

For the past few years, research works on the topic of secure outsourcing of cryptographic computations has drawn significant attention from academics in security and cryptology disciplines as well as information security practitioners. One main reason for this interest is their application for resource constrained devices such as RFID tags. While there has been significant progress in this domain since Hohenberger and Lysyanskaya have provided formal security notions for secure computation delegation, there are some interesting challenges that need to be solved that can be useful towards a wider deployment of cryptographic protocols that enable secure outsourcing of cryptographic computations. This position paper brings out these challenging problems with RFID technology as the use case together with our ideas, where applicable, that can provide a direction towards solving the problems.