Ratoon sugarcane yield integrated drip-irrigation and nitrogen fertilization

The aim of this study was to compare the use of water and nitrogen on ratoon sugarcane during irrigated and rain-fed conditions, and to assess the production potential of stalks and sugar with different rates of N-fertilizer on the subsurface drip-irrigated management. The experimental design was a randomized block with four replications for each experiment and treatments: (T1) irrigated, 0kg N ha-1; (T2) irrigated, 70kg N ha-1; (T3) irrigated, 140kg N ha-1; (T4) irrigated, 210kg N ha-1; (T5) not irrigated, 0kg N ha-1, and (T6) not irrigated, 140kg N ha-1. Biometric, technological, dry matter and yield variables were analyzed among the treatments. The irrigation system together with the application of N-fertilizer at 140kg ha-1 presented significant differences in dry matter accumulation of shoots, and for the production of stalks and sugar, respectively 94, 105 and 106%, higher when compared to the not irrigated, without N-fertilizer (T5). There was a positive and synergistic effect of irrigation with N-fertilizer on the productivity of stalks and sugar. Ratoon sugarcane irrigated with subsurface dripping had the highest yield (22Mg ha-1 of sugar) with the dosage of 140kg ha-1 N.

Sugarcane trash management assessed by the interaction of yield with soil properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Popping expansion and yield responses of popcorn cultivars under different row spacings and plant populations

The objective of this work was to evaluate the agronomic traits and the popping expansion index of three Brazilian popcorn cultivars under different row spacings and plant populations. The trials were performed during two crop seasons, under field conditions. The experimental design used was a randomized complete block, in a split-split plot, with 27 treatments and four replicates. Treatments were represented in a triple factorial arrangement: three row spacings (0.40, 0.60, and 0.80 m), three plant populations (40,000, 60,000, and 80,000 plants per hectare), and three popcorn cultivars (IAC-TC 01, IAC 12, and Zelia). The increase in plant population causes a reduction in the number of grains per ear, lower prolificacy, and grain weight loss. Cultivar grain yield is affected by row spacing and popcorn plant population. Cultivar IAC 12 shows highest grain yield under row spacings of 0.40 and 0.60 m and plant population between 60,000 and 80,000 plants per hectare. The popping expansion index is not affected by row spacing or plant population.

Effect of protein, carbohydrate, lipid, and selenium levels on the performance, carcass yield, and blood changes in broilers

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of phytase supplementation on performance, bone densitometry and carcass yield in broilers chicks

An experiment was conducted to evaluate the performance, bone densitometry and carcass yield of broilers chicks, using different levels of phytase enzyme. Nine hundred and sixty male one-day-old broiler chicks were used. The birds were distributed in a completely randomized experimental design, involving five treatments and six replications of 32 chicks each. The treatments consisted of a control diet for each phase, and four other diets were formulated adding growing levels of the phytase enzyme (250, 500, 750 and 1,000 FTU of phytase kg-1 feed). When adding the phytase enzyme, the nutritional matrix was valued to guarantee the same nutritional levels as the control diet. In general, the addition of phytase enzyme determined a linear decrease on the performance of the birds. However, the performance obtained with the level of 250 FTU phytase kg-1 feed were no different from the control treatment. The best bone density results were observed in the control treatment with no phytase, and the highest leg and thigh yield were obtained at the level of 514 FTU phytase kg-1.

Nutritional balance and yield for green manure orange trees

Intercropping could efficiently prevent soil nutrient losses caused by extensive agriculture. The present study aimed to assess the effect of green manure on the nutritional status of orange trees cultivar 'Pera' (Citrus sinensis (L.) Osbeck). The plants were grafted on 'Cravo' lime trees and were then planted in a 7x4m space. Four different treatments corresponding to the evaluated green manures were employed: jack bean (JB) (Canavalia ensiformis DC), lablab (LL) (Dolichos lablab L.), pigeon pea (PP) (Cajanus cajan L. Millsp), and Brachiaria (BQ) (Brachiaria brizantha Hochst ex A. Rich. Stapf) as control. The experimental design was in randomized blocks, in split-plot time, with six replicates, with four treatments (green manures) and two plants per evaluation. The nutritional status was assessed by using the DRIS method (Diagnosis and Recommendation Integrated System); the yield and the macro and micronutrient levels contained in green manures and in the control was also determined. The nutritional diagnosis indicated that, in the two years of experiment, plants treated with green manure showed better nutritional balance index compared to Brachiaria. This suggests that, over time, green manure can lead to better nutritional balance. Pigeon pea treatment showed the highest yields, compared to control, in the two evaluated crop cycles (2004/05 and 2005/06).

Role of the reactive atmosphere during the sol-gel synthesis on the enhancing of the emission quantum yield of urea cross-linked tripodal siloxane-based hybrids

Transparent monoliths and films of urea cross-linked tripodal siloxane-based hybrids (named tri-ureasils) were prepared by the sol-gel process, under controlled atmosphere (inside a glove box) and ambient conditions and their structure and optical features were compared. X-ray diffraction data point out that all the materials are essentially amorphous and Si-29 NMR reveal an increase in the condensation degree (0.97) for the hybrids prepared under controlled atmosphere relatively to that found for those prepared under ambient conditions (0.84-0.91). The tri-ureasils are white light emitters under UV/Visible excitation (from 250 to 453 nm) being observed for the composites prepared inside the glove box a significant enhancement (60-80 %) of the absorption coefficient and higher emission quantum yield values (similar to 0.27 and similar to 0.20 for monoliths and films, respectively) relatively to those synthesized under ambient condition.

Relations between the yield of bean (Phaseolus vulgaris L.) and chemical attributes of an Acrustox under no-tillage

In crop year 2006/07, in Selviria, MS, Brazil, were analyzed the productivity of beans because of the chemical attributes of an Acrustox cultivated under conditions of high technological level of management by no-tillage irrigated with pivot central. The objective was to select, among the attributes studied soil, the one with the best representation to explain the variability of agricultural productivity. Geostatistical grid was installed to collect data from soil and plant, with 117 sampling points in an area of 2,025 m(2) and homogeneous slope of 0.055 m m(-1). From the standpoint of linear and spatial bean yield was respectively explained in terms of P and soil pH. So much for the values of phosphorus (P) in the intermediate layer and subsurface between 24-26 mg dm(-3), as well as for Hydrogen (pH) in the surface layer between 5.0 to 5.4, resulted in sites with the most high yield (2,160-2,665 kg ha(-1)).

Quantitative descriptors and their direct and indirect effects on corn yield

The objective of this study was to evaluate the direct and indirect effects of ten quantitative descriptors of agronomic importance in productivity of 25 maize hybrids and their respective influences of heritability. The experiment in randomized blocks with four replications, was conducted in 2010/2011 crop in a soil under humid subtropical climate. The quantitative descriptors were: ear length, ear diameter, cob diameter, number of rows of grains, stem diameter, plant height, ear height, weight of 100 grains, grain weight per ear and number of grains per ear. The grain weight per ear and ear length showed high correlation with grain yield, and the descriptors with the highest potential for selecting superior genotypes and showing high heritability.

Genetic Parameters for Milk Yield and Lactation Length of Crossbred Buffaloes from Brazil by Bayesian Inference

The objective of the study was to estimate heritability and repeatability for milk yield (MY) and lactation length (LL) in buffaloes using Bayesian inference. The Brazilian genetic improvement program of buffalo provided the data that included 628 females, from four herds, born between 1980 and 2003. In order to obtain the estimates of variance, univariate analyses were performed with the Gibbs sampler, using the MTGSAM software. The model for MY and LL included direct genetic additive and permanent environment as random effects, and contemporary groups, milking frequency and calving number as fixed effects. The convergence diagnosis was performed with the Geweke method using an algorithm implemented in R software through the package Bayesian Output Analysis. Average for milk yield and lactation length was 1,546.1 +/- 483.8 kg and 252.3 +/- 42.5 days, respectively. The heritability coefficients were 0.31 (mode), 0.35 (mean) and 0.34 (median) for MY and 0.11 (mode), 0.10 (mean) and 0.10 (median) for LL. The repeatability coefficient (mode) were 0.50 and 0.15 for MY and LL, respectively. Milk yield is the only trait with clear potential for genetic improvement by direct genetic selection. The repeatability for MY indicates that selection based on the first lactation could contribute for an improvement in this trait.

Genetic Parameter Estimates for Milk Yield and Lactation Length in Buffalo

The objective of this study was to estimate genetic parameters for milk yield at 244 days and lactation length in graded buffalo cows at the El Cangre Cattle Genetic Enterprise. Data were gathered from 2575 lactations, 1377 buffalo cows, 37 milking units and between 2002-2009 calving years. It was employed the Restricted Maximum Likelihood method (REML) for estimating (co) variance components with multi trait model. Average of milk yield at 244 days and lactation length were 864 kg and 240 days, respectively. Heritability was 0.15 for milk yield and 0.13 for lactation length. Genetic correlation between these traits was 0.63. It was concluded that it is necessary to intensify selection and to increase control of the information of the genetic herds to obtain high precision in the estimates and therefore, obtain bigger genetic progress in of this species in our country.

Application of Reactions Norms in Study of Genotype Environmental Interaction for Milk Yield of Buffaloes

The aim of this study was to estimate genetic parameters for milk yield (MY) in buffaloes using reaction norms. Model included the additive direct effect as random and contemporary group (herd and year of birth) were included as fixed effects and cow age classes (linear) as covariables. The animal additive direct random effect was modeled through linear Legendre polynomials on environment gradient (EG) standardized means. Mean trends were taken into account by a linear regression on Legendre polynomials of environmental group means. Residual variance was modeled trough 6 heterogeneity classes (EG). These classes of residual variance was formed : EG1: mean = 866,93 kg (621,68 kg-1011,76 kg); EG2: mean = 1193,00 kg (1011,76 kg-1251,49 kg); EG3: mean = 1309,37 kg (1251,49 kg -1393,20 kg); EG4: mean = 1497,59 kg (1393,20 kg-1593,53 kg); EG5: mean = 1664,78 kg (1593,53 kg -1727,32kg) e EG6: mean = 1973,85 kg (1727,32 kg -2422,19 kg).(Co) variance functions were estimated by restricted maximum likelihood (REML) using the GIBBS3F90 package. The heritability estimates for MY raised as the environmental gradient increased, varying from 0.20 to 0.40. However, in intermediate to favorable environments, the heritability estimates obtained with Considerable genotype-environment interaction was found for MY using reaction norms. For genetic evaluation of MY is necessary to consider heterogeneity of variances to model the residual variance.