Assistência em saúde: revisão integrativa do conhecimento produzido à luz da complexidade

This is part of an integrative review whose object of study was the production of knowledge in journals concerning nursing studies that have used the Theory of complexity as a theoretical framework. This study gathers seven articles collected from a literature review of 18 publications found on the databases: Medical Literature Analysis and Retrieval Sistem on-line (MEDLINE), Literatura Latino-Americana e do Caribe emCiências da Saúde (LILACS) and Cumulative Index to Nursing and Allied Health Literature (CINAHL) from 1998 to 2008. In the two former databases, the following combination of key words was used: “complexity theory” and “health” and “nursing”, and in the third: “complexidade” and “saúde” and “enfermagem. Content analysis was the methodological framework that allowed for organizing the knowledge aggregated in the theme: Health Care. It was observed that the Complexity Theory has based the comprehension of the health care process, pointing out the care provider with his practices and the environment.

Estimação espaço-temporal das perdas não técnicas no sistema de distribuição de energia elétrica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fatores de risco relacionados à perda de produtividade laboral e aumento dos custos ambulatoriais de pacientes atendidos por unidades básicas de saúde

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Características estruturais e físicas de material biodegradável produzido a base de zeína e fibras de milho e bananeira

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Integration of spatial and temporal models to predict extreme water table depths

The objective of this work was to evaluate extreme water table depths in a watershed, using methods for geographical spatial data analysis. Groundwater spatio-temporal dynamics was evaluated in an outcrop of the Guarani Aquifer System. Water table depths were estimated from monitoring of water levels in 23 piezometers and time series modeling available from April 2004 to April 2011. For generation of spatial scenarios, geostatistical techniques were used, which incorporated into the prediction ancillary information related to the geomorphological patterns of the watershed, using a digital elevation model. This procedure improved estimates, due to the high correlation between water levels and elevation, and aggregated physical sense to predictions. The scenarios showed differences regarding the extreme levels - too deep or too shallow ones - and can subsidize water planning, efficient water use, and sustainable water management in the watershed.

SPATIAL PATTERN OF FOUR FOREST COMMUNITIES BY RIPLEY'S K FUNCTION IN SAO PAULO STATE

Investigating tree's spatial patterns according to their size classes and according to their more abundant species can provide evidences about the structure of the vegetal community, since the spatial pattern is a key question for forestry ecology studies. The tree spatial organization patterns on the environment depend on several ecological processes and on the specific characteristics of each environment, so that the best understanding of this frame provides important elements for the knowledge on forestry formation. This paper aimed to study tree spatial patterns, according to the diameter classes and from four most abundant species in different forests, in order to provide evidences regarding to the ecology of each vegetal community. The spatial pattern description in each forestry formation was developed using Ripley's K function. The studied forestry formations were: Ombrophilous Forest, Cerradao, Seasonal Forest and Restinga Forest. In this work, a 10.24 ha plot was installed in each forestry formation, and every tree, with a circumference at breast height (CBH) larger than 15 cm were measured, georeferenced and identified. The obtained data highlights the aggregated character in tropical forests, as observed in every studied forest. The 'Cerraddo' and 'Restinga' forest trees showed close aggregate patterns. In the Ombrophilous forest, for all distance scales, the aggregate pattern was meaningful. In the seasonal forest, a random tendency was observed, although a meaningful aggregation was observed in all short distances. The spatial pattern by diameter classes was generally aggregated for trees smaller than 10 cm of diameter and between 10 and 20 cm and random for the others, proving the existence of a tendency which in young trees is more aggregated than in old ones. The spatial pattern of the dominant species is always strongly similar to the general pattern of each forestry formation. The differences between the spatial patterns of two or three coincident species, among the forestry formations, indicate that its pattern is influenced by each different environment. This stands out the importance of its self-ecology and of its ecological processes, intrinsic of each community that can explain the observed patterns.

Metacontingencies, Experimentation and Nonhumans: Searching for Conceptual and Methodological Advances

Metacontingency has been described as the functional relation between interlocking behavioral contingencies, plus their direct and immediate effect, called aggregated product, and a selecting event dependent of such effect, called cultural consequence. The metacontingencies analysis enables the discussion of human behavior complexity in social systems. In the present study, we aimed to review and discuss: (a) the importance of basic behavioral processes analysis for the comprehension of social human phenomena; (b) the necessity of constructing and improving metacontingencies experimental models; (c) the current state of metacontingencies experimental investigations in humans; (d) the use of animal models as a way to control the effects of verbal behavior, among other variables, over cultural selection; (e) a concrete and illustrative proposal of an animal model of metacontingencies.

Infant mortality in Brazil, 1980-2000: A spatial panel data analysis

Background: Infant mortality is an important measure of human development, related to the level of welfare of a society. In order to inform public policy, various studies have tried to identify the factors that influence, at an aggregated level, infant mortality. The objective of this paper is to analyze the regional pattern of infant mortality in Brazil, evaluating the effect of infrastructure, socio-economic, and demographic variables to understand its distribution across the country. Methods: Regressions including socio-economic and living conditions variables are conducted in a structure of panel data. More specifically, a spatial panel data model with fixed effects and a spatial error autocorrelation structure is used to help to solve spatial dependence problems. The use of a spatial modeling approach takes into account the potential presence of spillovers between neighboring spatial units. The spatial units considered are Minimum Comparable Areas, defined to provide a consistent definition across Census years. Data are drawn from the 1980, 1991 and 2000 Census of Brazil, and from data collected by the Ministry of Health (DATASUS). In order to identify the influence of health care infrastructure, variables related to the number of public and private hospitals are included. Results: The results indicate that the panel model with spatial effects provides the best fit to the data. The analysis confirms that the provision of health care infrastructure and social policy measures (e. g. improving education attainment) are linked to reduced rates of infant mortality. An original finding concerns the role of spatial effects in the analysis of IMR. Spillover effects associated with health infrastructure and water and sanitation facilities imply that there are regional benefits beyond the unit of analysis. Conclusions: A spatial modeling approach is important to produce reliable estimates in the analysis of panel IMR data. Substantively, this paper contributes to our understanding of the physical and social factors that influence IMR in the case of a developing country.

In Vitro Development and Cell Allocation After Aggregation of Syngeneic Wild Type and Fluorescence-Expressing Bovine Cloned Embryos

Background: The in vitro production (IVP) of embryos by in vitro fertilization or cloning procedures has been known to cause epigenetic changes in the conceptus that in turn are associated with abnormalities in pre- and postnatal development. Handmade cloning (HMC) procedures and the culture of zona-free embryos in individual microwells provide excellent tools for studies in developmental biology, since embryo development and cell allocation patterns can be evaluated under a wide range of embryo reconstruction arrangements and in in vitro embryo culture conditions. As disturbances in embryonic cell allocation after in vitro embryo manipulations and unusual in vivo conditions during the first third of pregnancy appear to be associated with large offspring, embryo aggregation procedures may allow a compensation for epigenetic defects between aggregated embryos or even may influence more favorable cell allocation in embryonic lineages, favoring subsequent development. Thus, the aim of this study was to evaluate in vitro embryo developmental potential and the pattern of cell allocation in blastocysts developed after the aggregation of handmade cloned embryos produced using syngeneic wild type and/or transgenic somatic cells. Materials, Methods & Results: In vitro-matured bovine cumulus-oocyte complexes (COC) were manually bisected after cumulus and zona pellucida removal; then, two enucleated hemi-oocytes were paired and fused with either a wild type (WT) or a GFP-expressing (GFP) fetal skin cell at the 11th and 19th passages, respectively. Following chemical activation, reconstructed cloned embryos and zona-free parthenote embryos were in vitro-cultured in microwells, for 7 days, either individually (1 x 100%) or after the aggregation of two structures (2 x 100%) per microwell, as follows: (G1) one WT cloned embryo; (G2) two aggregated WT embryos; (G3) one GFP cloned embryo; (G4) two aggregated GFP embryos; (G5) aggregation of a WT embryo and a GFP embryo; (G6) one parthenote embryo; or (G7) two aggregated parthenote embryos. Fusion (clones), cleavage (Day 2), and blastocyst (Day 7) rates, and embryonic cell allocation were compared by the. 2 or Fisher tests. Total cell number (TCN) in blastocysts was analyzed by the Student's test (P < 0.05). Fusion and cleavage rates, and cell allocation were similar between groups. On a per WOW basis, development to the blastocyst stage was similar between groups, except for lower rates of development seen in G3. However, when based on number of embryos per group (one or two), blastocyst development was higher in G1 than all other groups, which were similar between one another. Cloned GFP embryos had lower in vitro development to the blastocyst stage than WT embryos, which had more TCN than parthenote or aggregated chimeric WT/GFP embryos. Aggregated GFP embryos had fewer cells than the other embryo groups. Discussion: The in vitro development of GFP cloned embryos was lower than WT embryos, with no effects on cell allocation in resulting blastocysts. Differences in blastocyst rate between groups were likely due to lower GFP-expressing cell viability, as GFP donor cells were at high population cell doublings when used for cloning. On a per embryo basis, embryo aggregation on Day 1 resulted in blastocyst development similar to non-aggregated embryos on Day 7, with no differences in cell proportion between groups. The use of GFP-expressing cells was proven a promising strategy for the study of cell allocation during embryo development, which may assist in the elucidation of mechanisms of abnormalities after in vitro embryo manipulations, leading to the development of improved protocols for the in vitro production (IVP) of bovine embryos.

Optimization of Large-Scale Hydrothermal System Operation

This paper presents the development of a mathematical model to optimize the management and operation of the Brazilian hydrothermal system. The system consists of a large set of individual hydropower plants and a set of aggregated thermal plants. The energy generated in the system is interconnected by a transmission network so it can be transmitted to centers of consumption throughout the country. The optimization model offered is capable of handling different types of constraints, such as interbasin water transfers, water supply for various purposes, and environmental requirements. Its overall objective is to produce energy to meet the country's demand at a minimum cost. Called HIDROTERM, the model integrates a database with basic hydrological and technical information to run the optimization model, and provides an interface to manage the input and output data. The optimization model uses the General Algebraic Modeling System (GAMS) package and can invoke different linear as well as nonlinear programming solvers. The optimization model was applied to the Brazilian hydrothermal system, one of the largest in the world. The system is divided into four subsystems with 127 active hydropower plants. Preliminary results under different scenarios of inflow, demand, and installed capacity demonstrate the efficiency and utility of the model. From this and other case studies in Brazil, the results indicate that the methodology developed is suitable to different applications, such as planning operation, capacity expansion, and operational rule studies, and trade-off analysis among multiple water users. DOI: 10.1061/(ASCE)WR.1943-5452.0000149. (C) 2012 American Society of Civil Engineers.

MORPHOLOGY, MINERALOGY AND MICROMORPHOLOGY OF SOILS ASSOCIATED TO SUMMIT DEPRESSIONS OF THE NORTHEASTERN BRAZILIAN COASTAL PLAINS

The scarcity of comprehensive characterizations of soils associated to gentle summit depressions of the Northeastern Brazilian Coastal Plains justifies this work, which had as objective to provide basic information for the more diverse agricultural and non-agricultural uses. For that, representative soils (Spodosols or similar soils) from these environments were selected in Alagoas, Sergipe and Bahia states. This approach included characterization of morphological, mineralogical and micromorphological properties of the soil profiles, employing standard procedures. The morphological characterization corroborated the effect of the podzolization process during the formation of these soils. The mineralogy of the clay fraction of these soils was basically composed of kaolinite and quartz, which, associated to the very sandy texture, helped in the understanding of the obtained data. The soil micromorphological study, besides confirming the field morphology, mainly in regard to the strong cementation, aggregated value to the work in terms of the secure identification of the clay illuviation process (non-identified in the field), in association with the dominant podzolization process.

A MODIS-Based Energy Balance to Estimate Evapotranspiration for Clear-Sky Days in Brazilian Tropical Savannas

Evapotranspiration (ET) plays an important role in global climate dynamics and in primary production of terrestrial ecosystems; it represents the mass and energy transfer from the land to atmosphere. Limitations to measuring ET at large scales using ground-based methods have motivated the development of satellite remote sensing techniques. The purpose of this work is to evaluate the accuracy of the SEBAL algorithm for estimating surface turbulent heat fluxes at regional scale, using 28 images from MODIS. SEBAL estimates are compared with eddy-covariance (EC) measurements and results from the hydrological model MGB-IPH. SEBAL instantaneous estimates of latent heat flux (LE) yielded r(2) = 0.64 and r(2) = 0.62 over sugarcane croplands and savannas when compared against in situ EC estimates. At the same sites, daily aggregated estimates of LE were r(2) = 0.76 and r(2) = 0.66, respectively. Energy balance closure showed that turbulent fluxes over sugarcane croplands were underestimated by 7% and 9% over savannas. Average daily ET from SEBAL is in close agreement with estimates from the hydrological model for an overlay of 38,100 km(2) (r(2) = 0.88). Inputs to which the algorithm is most sensitive are vegetation index (NDVI), gradient of temperature (dT) to compute sensible heat flux (H) and net radiation (Re). It was verified that SEBAL has a tendency to overestimate results both at local and regional scales probably because of low sensitivity to soil moisture and water stress. Nevertheless the results confirm the potential of the SEBAL algorithm, when used with MODIS images for estimating instantaneous LE and daily ET from large areas.

Gregarious behavior of two species of Neotropical harvestmen (Arachnida: Opiliones: Gonyleptidae)

We present the first record and description of the gregarious behavior of the Neotropical harvestmen Serracutisoma proximum (Mello-Leitao 1922) and Serracutisoma spelaeum (Mello-Leitao 1933) (Opiliones: Gonyleptidae: Goniosomatinae) (DaSilva & Gnaspini 2010). We followed and described the pattern of these aggregations over a period of 17 months in a cave in southeastern Brazil. Individuals of the two species aggregated with both conspecifics and heterospecifics during the non-reproductive season (i.e., from October to March, the cool and dry season). Aggregations contained up to 81 individuals, usually with a female-biased adult sex ratio. Multispecific aggregations were usually composed mainly of representatives of one of the two species, suggesting that although these species also aggregate with heterospecifics, there is a preference for aggregating with conspecifics. This study provides novel information on the social behavior of harvestmen, specifically regarding the composition of multispecific aggregations.

Effect of partial preferential orientation and distortions in octahedral clusters on the photoluminescence properties of FeWO4 nanocrystals

This communication is a report of our initial research to obtain iron tungstate (FeWO4) nanocrystals by the microwave-hydrothermal method at 170 degrees C for 45 min. X-ray diffraction patterns showed that the FeWO4 nanocrystals prepared with polyethylene glycol-200 have a partial preferential orientation in the (011) plane in relation to other nanocrystals prepared with sodium bis(2-ethylhexyl) sulfosuccinate and water. Rietveld refinement data indicates that all nanocrystals are monophasic with wolframite-type monoclinic structures and exhibit different distortions on octahedral [FeO6]/[WO6] clusters. High resolution transmission electron microcopy revealed an oriented attachment mechanism for the growth of aggregated FeWO4 nanocrystals. Finally, we observed that the photoluminescence properties of these nanocrystals are affected by partial preferential orientation in the (011) plane and distortions on [FeO6]/[WO6] clusters.

X-ray Microdensitometry Applied to Determination of Wood Density Variation of Eucalyptus grandis W. Hill trees

This study aimed to analyze the variation of wood density in the radial and longitudinal trunk of Eucalyptus grandis trees. Six 23 years old trees were selected and cross sections were cut in three longitudinal positions (DBH, 3.70, 6.10 m) of the log. The results showed that the apparent density of wood (i) increases in the radial direction, characterizing the juvenile wood and mature wood, (ii) no significant variation in base-top log direction was observed. Based on the radial profiles of density, the mature wood of Eucalyptus grandis can be applied in the manufacture of products with higher aggregated value (PMVAs).